PRIMECLUSTER Global Link Services Configuration and Administration Guide: Redundant Line Control Function 4.1 (for Solaris(TM) Operating System)

<H1><A NAME="top">Index</A></H1><P> <A HREF="#label3">[A]</A> <A HREF="#label5">[C]</A> <A HREF="#label6">[D]</A> <A HREF="#label8">[F]</A> <A HREF="#label9">[G]</A> <A HREF="#label10">[H]</A> <A HREF="#label11">[I]</A> <A HREF="#label14">[L]</A> <A HREF="#label15">[M]</A> <A HREF="#label16">[N]</A> <A HREF="#label18">[P]</A> <A HREF="#label20">[R]</A> <A HREF="#label21">[S]</A> <A HREF="#label22">[T]</A> <A HREF="#label23">[U]</A> <A HREF="#label24">[V]</A> <A HREF="#label25">[W]</A></P> <HR> <PRE> <B><A NAME="label3">[A] </A></B><A HREF="#top">↑</A> <B>Active interface</B> <A HREF="../hanet13/hanet402.htm#Active_Zinterface" TARGET="fmain">Glossary</A> <B>Automatic fail-back function</B> <A HREF="../hanet03/hanet054.htm" TARGET="fmain">2.2.10 Automatic fail-back function</A> <A HREF="../hanet13/hanet402.htm#Automatic_Zfail-back_Zfunction" TARGET="fmain">Glossary</A> <B><A NAME="label5">[C] </A></B><A HREF="#top">↑</A> <B>Cluster failover function (failover function)</B> <A HREF="../hanet13/hanet402.htm#Cluster_Zfailover_Zfunction_Z(failover_Zfunction)" TARGET="fmain">Glossary</A> <B><A NAME="label6">[D] </A></B><A HREF="#top">↑</A> <B>DR</B> <A HREF="../hanet05/hanet155.htm" TARGET="fmain">4.5.1 Executing DR command</A> <A HREF="../hanet05/hanet166.htm" TARGET="fmain">4.6.6 How to recover when an error occurred in a transfer route at the execution of DR</A> <A HREF="../hanet09/hanet260.htm" TARGET="fmain">A.1.5 DR connection script error output messages</A> <B>dsphanet Command</B> <A HREF="../hanet08/hanet242.htm" TARGET="fmain">7.4 dsphanet Command</A> <B>dsppoll Command</B> <A HREF="../hanet08/hanet246.htm" TARGET="fmain">7.8 dsppoll Command</A> <B>Dynamic Reconfiguration</B> <A HREF="../hanet04/hanet140.htm" TARGET="fmain">3.7.2 Setting Dynamic Reconfiguration (DR)</A> <B>Dynamic switching function</B> <A HREF="../hanet13/hanet402.htm#Dynamic_Zswitching_Zfunction" TARGET="fmain">Glossary</A> <B><A NAME="label8">[F] </A></B><A HREF="#top">↑</A> <B>Fast switching mode</B> <A HREF="../hanet02/hanet004.htm#Fast_Zswitching_Zmode" TARGET="fmain">1.1 What is redundant line control?</A> <A HREF="../hanet02/hanet008.htm#Fast_Zswitching_Zmode" TARGET="fmain">1.3 System Configuration</A> <A HREF="../hanet03/hanet011.htm" TARGET="fmain">2.1.1 Fast switching mode</A> <A HREF="../hanet03/hanet068.htm" TARGET="fmain">2.4.2 Duplicated operation by Fast switching mode</A> <A HREF="../hanet04/hanet077.htm" TARGET="fmain">3.1.2.1 Fast switching mode</A> <A HREF="../hanet04/hanet087.htm" TARGET="fmain">3.2.2.2 System setup in Fast switching mode</A> <A HREF="../hanet04/hanet095.htm" TARGET="fmain">3.3.1 Fast switching mode</A> <A HREF="../hanet04/hanet102.htm" TARGET="fmain">3.4.1 Fast switching mode</A> <A HREF="../hanet04/hanet109.htm" TARGET="fmain">3.5.1 Fast switching mode</A> <A HREF="../hanet04/hanet143.htm" TARGET="fmain">3.7.3.1 Operating VLAN interface on Fast switching mode</A> <A HREF="../hanet05/hanet157.htm#Fast_Zswitching_Zmode" TARGET="fmain">4.5.2.1 Replacement of PCI card on redundant system</A> <A HREF="../hanet05/hanet157.htm#Fast_Zswitching_Zmode1" TARGET="fmain">4.5.2.1 Replacement of PCI card on redundant system</A> <A HREF="../hanet05/hanet159.htm#Fast_Zswitching_Zmode" TARGET="fmain">4.5.2.3 Extension of PCI cards to redundant system</A> <A HREF="../hanet05/hanet161.htm" TARGET="fmain">4.6.1 Recovery procedure from line failure in Fast switching mode</A> <A HREF="../hanet06/hanet175.htm" TARGET="fmain">5.1.1.1.1 Fast switching mode</A> <A HREF="../hanet06/hanet179.htm" TARGET="fmain">5.1.1.2.1 Fast switching mode</A> <A HREF="../hanet06/hanet184.htm" TARGET="fmain">5.1.1.4.1 Fast switching mode</A> <A HREF="../hanet06/hanet190.htm" TARGET="fmain">5.1.2.2.1 Fast switching mode</A> <A HREF="../hanet06/hanet196.htm" TARGET="fmain">5.1.3.1.1 Fast switching mode</A> <A HREF="../hanet06/hanet199.htm" TARGET="fmain">5.1.3.2.1 Fast switching mode</A> <A HREF="../hanet06/hanet203.htm" TARGET="fmain">5.1.3.4.1 Fast switching mode</A> <A HREF="../hanet06/hanet211.htm" TARGET="fmain">5.1.5.1.1 Fast switching mode</A> <A HREF="../hanet06/hanet214.htm" TARGET="fmain">5.1.5.2.1 Fast switching mode</A> <A HREF="../hanet06/hanet217.htm" TARGET="fmain">5.1.5.3.1 Fast switching mode</A> <A HREF="../hanet06/hanet218.htm" TARGET="fmain">5.1.5.3.2 NIC switching mode</A> <A HREF="../hanet10/hanet262.htm" TARGET="fmain">B.1 Example of configuring Fast Switching mode (IPv4)</A> <A HREF="../hanet10/hanet271.htm" TARGET="fmain">B.2 Example of configuring Fast Switching mode (IPv6)</A> <A HREF="../hanet10/hanet280.htm" TARGET="fmain">B.3 Example of configuring Fast Switching mode (IPv4/IPv6)</A> <A HREF="../hanet13/hanet402.htm#Fast_Zswitching_Zmode" TARGET="fmain">Glossary</A> <B>Fault monitoring function</B> <A HREF="../hanet03/hanet012.htm" TARGET="fmain">2.1.1.1 Fault monitoring function</A> <A HREF="../hanet03/hanet018.htm" TARGET="fmain">2.1.2.1 Fault monitoring function</A> <A HREF="../hanet03/hanet024.htm" TARGET="fmain">2.1.3.1 Fault monitoring function</A> <A HREF="../hanet03/hanet030.htm" TARGET="fmain">2.1.4.1 Fault monitoring function</A> <B><A NAME="label9">[G] </A></B><A HREF="#top">↑</A> <B>Global zone</B> <A HREF="../hanet13/hanet402.htm#Global_Zzone" TARGET="fmain">Glossary</A> <B>GS/SURE connection function</B> <A HREF="../hanet02/hanet004.htm#GS_SSURE_Zconnection_Zfunction" TARGET="fmain">1.1 What is redundant line control?</A> <A HREF="../hanet10/hanet330.htm" TARGET="fmain">B.9.1 Example of the Single system in GS/SURE connection function (GS communication function)</A> <A HREF="../hanet10/hanet331.htm" TARGET="fmain">B.9.2 Example of the Single system in GS/SURE connection function (SURE communication function)</A> <A HREF="../hanet10/hanet332.htm" TARGET="fmain">B.9.3 Example of the Single system in GS/SURE connection function (GS Hot-standby)</A> <A HREF="../hanet10/hanet334.htm" TARGET="fmain">B.9.5 Example of the Cluster system in GS/SURE connection function (GS communication function)</A> <A HREF="../hanet10/hanet335.htm" TARGET="fmain">B.9.6 Example of the Cluster system in GS/SURE connection function (SURE communication function)</A> <B>GS/SURE linkage mode</B> <A HREF="../hanet02/hanet004.htm#GS_SSURE_Zlinkage_Zmode" TARGET="fmain">1.1 What is redundant line control?</A> <A HREF="../hanet02/hanet008.htm#GS_SSURE_Zlinkage_Zmode" TARGET="fmain">1.3 System Configuration</A> <A HREF="../hanet03/hanet029.htm" TARGET="fmain">2.1.4 GS/SURE linkage mode</A> <A HREF="../hanet03/hanet072.htm" TARGET="fmain">2.4.6 Duplicated operation via GS/SURE linkage mode</A> <A HREF="../hanet04/hanet081.htm" TARGET="fmain">3.1.2.5 GS/SURE linkage mode</A> <A HREF="../hanet04/hanet091.htm" TARGET="fmain">3.2.2.6 System setup in GS/SURE linkage mode</A> <A HREF="../hanet04/hanet099.htm" TARGET="fmain">3.3.5 GS/SURE linkage mode</A> <A HREF="../hanet04/hanet106.htm" TARGET="fmain">3.4.5 GS/SURE linkage mode</A> <A HREF="../hanet04/hanet113.htm" TARGET="fmain">3.5.5 GS/SURE linkage mode</A> <A HREF="../hanet04/hanet135.htm#GS_SSURE_Zlinkage_Zmode" TARGET="fmain">3.6.11 Setting User command execution function</A> <A HREF="../hanet04/hanet135.htm#GS_SSURE_Zlinkage_Zmode1" TARGET="fmain">3.6.11 Setting User command execution function</A> <A HREF="../hanet04/hanet137.htm" TARGET="fmain">3.6.11.2 Settings for GS/SURE linkage mode</A> <A HREF="../hanet05/hanet157.htm#GS_SSURE_Zlinkage_Zmode" TARGET="fmain">4.5.2.1 Replacement of PCI card on redundant system</A> <A HREF="../hanet05/hanet157.htm#GS_SSURE_Zlinkage_Zmode1" TARGET="fmain">4.5.2.1 Replacement of PCI card on redundant system</A> <A HREF="../hanet05/hanet159.htm#GS_SSURE_Zlinkage_Zmode" TARGET="fmain">4.5.2.3 Extension of PCI cards to redundant system</A> <A HREF="../hanet05/hanet165.htm" TARGET="fmain">4.6.5 Recovery procedure from line failure in GS/SURE linkage mode</A> <A HREF="../hanet06/hanet177.htm" TARGET="fmain">5.1.1.1.3 GS/SURE linkage mode</A> <A HREF="../hanet06/hanet181.htm" TARGET="fmain">5.1.1.2.3 GS/SURE linkage mode</A> <A HREF="../hanet06/hanet186.htm" TARGET="fmain">5.1.1.4.3 GS/SURE linkage mode</A> <A HREF="../hanet10/hanet329.htm" TARGET="fmain">B.9 Example of configuring GS/SURE linkage mode</A> <A HREF="../hanet13/hanet402.htm#GS_SSURE_Zlinkage_Zmode" TARGET="fmain">Glossary</A> <B><A NAME="label10">[H] </A></B><A HREF="#top">↑</A> <B>hanetbackup Command</B> <A HREF="../hanet08/hanet250.htm" TARGET="fmain">7.12 hanetbackup Command</A> <B>hanetconfig Command</B> <A HREF="../hanet08/hanet239.htm" TARGET="fmain">7.1 hanetconfig Command</A> <B>hanethvrsc Command</B> <A HREF="../hanet08/hanet252.htm" TARGET="fmain">7.14 hanethvrsc Command</A> <B>hanetnic Command</B> <A HREF="../hanet08/hanet247.htm" TARGET="fmain">7.9 hanetnic Command</A> <B>hanetobserv Command</B> <A HREF="../hanet08/hanet243.htm" TARGET="fmain">7.5 hanetobserv Command</A> <B>hanetparam Command</B> <A HREF="../hanet08/hanet244.htm" TARGET="fmain">7.6 hanetparam Command</A> <B>hanetpoll Command</B> <A HREF="../hanet08/hanet245.htm" TARGET="fmain">7.7 hanetpoll Command</A> <B>hanetrestore Command</B> <A HREF="../hanet08/hanet251.htm" TARGET="fmain">7.13 hanetrestore Command</A> <B>HUB monitoring function</B> <A HREF="../hanet03/hanet048.htm" TARGET="fmain">2.2.7.2 HUB monitoring function</A> <B>HUB-to-HUB monitoring feature</B> <A HREF="../hanet03/hanet049.htm" TARGET="fmain">2.2.7.2.1 Not using HUB-to-HUB monitoring feature</A> <A HREF="../hanet03/hanet050.htm" TARGET="fmain">2.2.7.2.2 Using HUB-to-HUB monitoring feature</A> <B>HUB-to-HUB monitoring function</B> <A HREF="../hanet13/hanet402.htm#HUB-to-HUB_Zmonitoring_Zfunction" TARGET="fmain">Glossary</A> <B><A NAME="label11">[I] </A></B><A HREF="#top">↑</A> <B>Interface status monitoring feature</B> <A HREF="../hanet03/hanet061.htm" TARGET="fmain">2.3.4 Interface status monitoring feature</A> <B><A NAME="label14">[L] </A></B><A HREF="#top">↑</A> <B>LAN card</B> <A HREF="../hanet13/hanet402.htm#LAN_Zcard" TARGET="fmain">Glossary</A> <B>Line monitoring</B> <A HREF="../hanet13/hanet402.htm#Line_Zmonitoring" TARGET="fmain">Glossary</A> <B>Logical interface</B> <A HREF="../hanet13/hanet402.htm#Logical_Zinterface" TARGET="fmain">Glossary</A> <B>Logical IP address</B> <A HREF="../hanet13/hanet402.htm#Logical_ZIP_Zaddress" TARGET="fmain">Glossary</A> <B>Logical IP address takeover function</B> <A HREF="../hanet13/hanet402.htm#Logical_ZIP_Zaddress_Ztakeover_Zfunction" TARGET="fmain">Glossary</A> <B>Logical virtual interface</B> <A HREF="../hanet10/hanet264.htm" TARGET="fmain">B.1.2 Example of the Single system in Logical virtual interface</A> <A HREF="../hanet10/hanet273.htm" TARGET="fmain">B.2.2 Example of the Single system in Logical virtual interface</A> <A HREF="../hanet10/hanet282.htm" TARGET="fmain">B.3.2 Example of the Single system in Logical virtual interface</A> <A HREF="../hanet10/hanet291.htm" TARGET="fmain">B.4.2 Example of the Single system in Logical virtual interface</A> <A HREF="../hanet13/hanet402.htm#Logical_Zvirtual_Zinterface" TARGET="fmain">Glossary</A> <B><A NAME="label15">[M] </A></B><A HREF="#top">↑</A> <B>Monitoring frame</B> <A HREF="../hanet13/hanet402.htm#Monitoring_Zframe" TARGET="fmain">Glossary</A> <B><A NAME="label16">[N] </A></B><A HREF="#top">↑</A> <B>NIC sharing function</B> <A HREF="../hanet13/hanet402.htm#NIC_Zsharing_Zfunction" TARGET="fmain">Glossary</A> <B>NIC switching mode</B> <A HREF="../hanet02/hanet004.htm#NIC_Zswitching_Zmode" TARGET="fmain">1.1 What is redundant line control?</A> <A HREF="../hanet02/hanet008.htm#NIC_Zswitching_Zmode" TARGET="fmain">1.3 System Configuration</A> <A HREF="../hanet03/hanet023.htm" TARGET="fmain">2.1.3 NIC switching mode</A> <A HREF="../hanet03/hanet071.htm" TARGET="fmain">2.4.5 Duplicated operation via NIC switching mode</A> <A HREF="../hanet04/hanet080.htm" TARGET="fmain">3.1.2.4 NIC switching mode</A> <A HREF="../hanet04/hanet090.htm" TARGET="fmain">3.2.2.5 System setup in NIC switching mode</A> <A HREF="../hanet04/hanet098.htm" TARGET="fmain">3.3.4 NIC switching mode</A> <A HREF="../hanet04/hanet105.htm" TARGET="fmain">3.4.4 NIC switching mode</A> <A HREF="../hanet04/hanet112.htm" TARGET="fmain">3.5.4 NIC switching mode</A> <A HREF="../hanet04/hanet125.htm" TARGET="fmain">3.6.7.3 Transfer route error detection time for NIC switching mode</A> <A HREF="../hanet04/hanet135.htm#NIC_Zswitching_Zmode" TARGET="fmain">3.6.11 Setting User command execution function</A> <A HREF="../hanet04/hanet135.htm#NIC_Zswitching_Zmode1" TARGET="fmain">3.6.11 Setting User command execution function</A> <A HREF="../hanet04/hanet136.htm" TARGET="fmain">3.6.11.1 Settings for NIC switching mode</A> <A HREF="../hanet04/hanet144.htm" TARGET="fmain">3.7.3.2 Operating VLAN interface on NIC switching mode</A> <A HREF="../hanet05/hanet157.htm#NIC_Zswitching_Zmode" TARGET="fmain">4.5.2.1 Replacement of PCI card on redundant system</A> <A HREF="../hanet05/hanet157.htm#NIC_Zswitching_Zmode1" TARGET="fmain">4.5.2.1 Replacement of PCI card on redundant system</A> <A HREF="../hanet05/hanet164.htm" TARGET="fmain">4.6.4 Recovery procedure from line failure in NIC switching mode</A> <A HREF="../hanet06/hanet176.htm" TARGET="fmain">5.1.1.1.2 NIC switching mode</A> <A HREF="../hanet06/hanet180.htm" TARGET="fmain">5.1.1.2.2 NIC switching mode</A> <A HREF="../hanet06/hanet185.htm" TARGET="fmain">5.1.1.4.2 NIC switching mode</A> <A HREF="../hanet06/hanet191.htm" TARGET="fmain">5.1.2.2.2 NIC switching mode</A> <A HREF="../hanet06/hanet197.htm" TARGET="fmain">5.1.3.1.2 NIC switching mode</A> <A HREF="../hanet06/hanet200.htm" TARGET="fmain">5.1.3.2.2 NIC switching mode</A> <A HREF="../hanet06/hanet204.htm" TARGET="fmain">5.1.3.4.2 NIC switching mode</A> <A HREF="../hanet06/hanet209.htm" TARGET="fmain">5.1.5 Tagged VLAN interface multiplexing on NIC switching mode (Standby)</A> <A HREF="../hanet06/hanet212.htm" TARGET="fmain">5.1.5.1.2 NIC switching mode</A> <A HREF="../hanet06/hanet215.htm" TARGET="fmain">5.1.5.2.2 NIC switching mode</A> <A HREF="../hanet10/hanet295.htm" TARGET="fmain">B.6 Example of configuring NIC switching mode (IPv4)</A> <A HREF="../hanet10/hanet309.htm" TARGET="fmain">B.7 Example of configuring NIC switching mode (IPv6)</A> <A HREF="../hanet10/hanet319.htm" TARGET="fmain">B.8 Example of configuring NIC switching mode (IPv4/IPv6)</A> <A HREF="../hanet13/hanet402.htm#NIC_Zswitching_Zmode" TARGET="fmain">Glossary</A> <B>Non-global zone (Zone)</B> <A HREF="../hanet13/hanet402.htm#Non-global_Zzone_Z(Zone)" TARGET="fmain">Glossary</A> <B><A NAME="label18">[P] </A></B><A HREF="#top">↑</A> <B>PHP</B> <A HREF="../hanet05/hanet156.htm" TARGET="fmain">4.5.2 Replacement/Expansion PHP (PCI Hot Plug)</A> <A HREF="../hanet05/hanet167.htm" TARGET="fmain">4.6.7 How to recover when an error occurred in a transfer route at the execution of PHP</A> <B>Physical interface</B> <A HREF="../hanet13/hanet402.htm#Physical_Zinterface" TARGET="fmain">Glossary</A> <B>Physical IP address</B> <A HREF="../hanet13/hanet402.htm#Physical_ZIP_Zaddress" TARGET="fmain">Glossary</A> <B>Physical IP address takeover function</B> <A HREF="../hanet10/hanet298.htm" TARGET="fmain">B.6.3 Example of the Single system in Physical IP address takeover function</A> <A HREF="../hanet13/hanet402.htm#Physical_ZIP_Zaddress_Ztakeover_Zfunction" TARGET="fmain">Glossary</A> <B>Physical IP address takeover function I</B> <A HREF="../hanet10/hanet305.htm" TARGET="fmain">B.6.10 Example of the Cluster system in Physical IP address takeover function I</A> <A HREF="../hanet13/hanet402.htm#Physical_ZIP_Zaddress_Ztakeover_Zfunction_ZI" TARGET="fmain">Glossary</A> <B>Physical IP address takeover function II</B> <A HREF="../hanet10/hanet306.htm" TARGET="fmain">B.6.11 Example of the Cluster system in Physical IP address takeover function II</A> <A HREF="../hanet13/hanet402.htm#Physical_ZIP_Zaddress_Ztakeover_Zfunction_ZII" TARGET="fmain">Glossary</A> <B>Primary interface</B> <A HREF="../hanet13/hanet402.htm#Primary_Zinterface" TARGET="fmain">Glossary</A> <B><A NAME="label20">[R] </A></B><A HREF="#top">↑</A> <B>Real interface</B> <A HREF="../hanet13/hanet402.htm#Real_Zinterface" TARGET="fmain">Glossary</A> <B>Redundant Line Control function</B> <A HREF="../hanet03/hanet063.htm" TARGET="fmain">2.3.5.1 Redundant Line Control function using Tagged VLAN interface</A> <A HREF="../hanet05/hanet146.htm" TARGET="fmain">4.1 Starting and Stopping Redundant Line Control function</A> <A HREF="../hanet05/hanet147.htm" TARGET="fmain">4.1.1 Starting Redundant Line Control function</A> <A HREF="../hanet05/hanet148.htm" TARGET="fmain">4.1.2 Stopping Redundant Line Control function</A> <A HREF="../hanet07/hanet231.htm" TARGET="fmain">6.1 Redundant Line Control function Troubleshooting Data to be Collected</A> <A HREF="../hanet09/hanet255.htm" TARGET="fmain">A.1 Messages Displayed by Redundant Line Control function</A> <A HREF="../hanet13/hanet402.htm#Redundant_ZLine_ZControl_Zfunction" TARGET="fmain">Glossary</A> <B>resethanet Command</B> <A HREF="../hanet08/hanet253.htm" TARGET="fmain">7.15 resethanet Command</A> <B>RIP mode</B> <A HREF="../hanet02/hanet004.htm#RIP_Zmode" TARGET="fmain">1.1 What is redundant line control?</A> <A HREF="../hanet02/hanet008.htm#RIP_Zmode" TARGET="fmain">1.3 System Configuration</A> <A HREF="../hanet03/hanet017.htm" TARGET="fmain">2.1.2 RIP mode</A> <A HREF="../hanet03/hanet069.htm" TARGET="fmain">2.4.3 Duplicated operation by RIP mode</A> <A HREF="../hanet04/hanet078.htm" TARGET="fmain">3.1.2.2 RIP mode</A> <A HREF="../hanet04/hanet088.htm" TARGET="fmain">3.2.2.3 System setup in RIP mode</A> <A HREF="../hanet04/hanet096.htm" TARGET="fmain">3.3.2 RIP mode</A> <A HREF="../hanet04/hanet103.htm" TARGET="fmain">3.4.2 RIP mode</A> <A HREF="../hanet04/hanet110.htm" TARGET="fmain">3.5.2 RIP mode</A> <A HREF="../hanet05/hanet162.htm" TARGET="fmain">4.6.2 Recovery procedure from line failure in RIP mode</A> <A HREF="../hanet10/hanet289.htm" TARGET="fmain">B.4 Example of configuring RIP mode</A> <A HREF="../hanet13/hanet402.htm#RIP_Zmode" TARGET="fmain">Glossary</A> <B>RMS Wizard</B> <A HREF="../hanet06/hanet222.htm#RMS_ZWizard" TARGET="fmain">5.2.3 Configuring cluster system</A> <A HREF="../hanet06/hanet226.htm#RMS_ZWizard" TARGET="fmain">5.4.1 Deleting configuration for a cluster environment</A> <A HREF="../hanet10/hanet267.htm#RMS_ZWizard" TARGET="fmain">B.1.5 Example of the Cluster system (1:1 Standby)</A> <A HREF="../hanet10/hanet268.htm#RMS_ZWizard" TARGET="fmain">B.1.6 Example of the Cluster system (Mutual Standby)</A> <A HREF="../hanet10/hanet269.htm#RMS_ZWizard" TARGET="fmain">B.1.7 Example of the Cluster system (N:1 Standby)</A> <A HREF="../hanet10/hanet270.htm#RMS_ZWizard" TARGET="fmain">B.1.8 Example of the Cluster system (Cascade)</A> <A HREF="../hanet10/hanet276.htm#RMS_ZWizard" TARGET="fmain">B.2.5 Example of the Cluster system (1:1 Standby)</A> <A HREF="../hanet10/hanet277.htm#RMS_ZWizard" TARGET="fmain">B.2.6 Example of the Cluster system (Mutual standby)</A> <A HREF="../hanet10/hanet278.htm#RMS_ZWizard" TARGET="fmain">B.2.7 Example of the Cluster system (N:1 Standby)</A> <A HREF="../hanet10/hanet279.htm#RMS_ZWizard" TARGET="fmain">B.2.8 Example of the Cluster system (Cascade)</A> <A HREF="../hanet10/hanet285.htm#RMS_ZWizard" TARGET="fmain">B.3.5 Example of the Cluster system (1:1 Standby)</A> <A HREF="../hanet10/hanet286.htm#RMS_ZWizard" TARGET="fmain">B.3.6 Example of the Cluster system (Mutual standby)</A> <A HREF="../hanet10/hanet287.htm#RMS_ZWizard" TARGET="fmain">B.3.7 Example of the Cluster system (N:1 Standby)</A> <A HREF="../hanet10/hanet288.htm#RMS_ZWizard" TARGET="fmain">B.3.8 Example of the Cluster system (Cascade)</A> <A HREF="../hanet10/hanet302.htm#RMS_ZWizard" TARGET="fmain">B.6.7 Example of the Cluster system (1:1 Standby)</A> <A HREF="../hanet10/hanet303.htm#RMS_ZWizard" TARGET="fmain">B.6.8 Example of the Cluster system (Mutual standby) without NIC sharing</A> <A HREF="../hanet10/hanet304.htm#RMS_ZWizard" TARGET="fmain">B.6.9 Example of the Cluster system (Mutual standby) with NIC sharing</A> <A HREF="../hanet10/hanet305.htm#RMS_ZWizard" TARGET="fmain">B.6.10 Example of the Cluster system in Physical IP address takeover function I</A> <A HREF="../hanet10/hanet306.htm#RMS_ZWizard" TARGET="fmain">B.6.11 Example of the Cluster system in Physical IP address takeover function II</A> <A HREF="../hanet10/hanet307.htm#RMS_ZWizard" TARGET="fmain">B.6.12 Example of the Cluster system (Cascade)</A> <A HREF="../hanet10/hanet308.htm#RMS_ZWizard" TARGET="fmain">B.6.13 Example of the Cluster system (NIC non-redundant)</A> <A HREF="../hanet13/hanet402.htm#RMS_ZWizard" TARGET="fmain">Glossary</A> <B>Router monitoring function</B> <A HREF="../hanet03/hanet047.htm" TARGET="fmain">2.2.7.1 Router monitoring function</A> <B>Router/HUB monitoring function</B> <A HREF="../hanet03/hanet046.htm" TARGET="fmain">2.2.7 Router/HUB monitoring function</A> <A HREF="../hanet04/hanet122.htm" TARGET="fmain">3.6.7 Router/HUB monitoring function</A> <A HREF="../hanet04/hanet124.htm" TARGET="fmain">3.6.7.2 Enabling Router/HUB monitoring function</A> <A HREF="../hanet13/hanet402.htm#Router_SHUB_Zmonitoring_Zfunction" TARGET="fmain">Glossary</A> <B><A NAME="label21">[S] </A></B><A HREF="#top">↑</A> <B>Secondary interface</B> <A HREF="../hanet13/hanet402.htm#Secondary_Zinterface" TARGET="fmain">Glossary</A> <B>Sharing physical interface</B> <A HREF="../hanet03/hanet039.htm" TARGET="fmain">2.2.4 Sharing physical interface</A> <A HREF="../hanet04/hanet119.htm" TARGET="fmain">3.6.4 Sharing physical interface</A> <B>Sharing transfer route monitoring</B> <A HREF="../hanet13/hanet402.htm#Sharing_Ztransfer_Zroute_Zmonitoring" TARGET="fmain">Glossary</A> <B>Solaris container</B> <A HREF="../hanet03/hanet064.htm" TARGET="fmain">2.3.6 Line control of Solaris container</A> <A HREF="../hanet04/hanet093.htm" TARGET="fmain">3.2.4 Zone setup for Solaris container</A> <A HREF="../hanet10/hanet266.htm" TARGET="fmain">B.1.4 Network configuration in the Solaris container</A> <A HREF="../hanet10/hanet275.htm" TARGET="fmain">B.2.4 Network configuration in the Solaris container</A> <A HREF="../hanet10/hanet284.htm" TARGET="fmain">B.3.4 Network configuration in the Solaris container</A> <A HREF="../hanet10/hanet301.htm" TARGET="fmain">B.6.6 Network configuration in the Solaris container (physical IP takeover)</A> <A HREF="../hanet10/hanet314.htm" TARGET="fmain">B.7.5 Network configuration in the Solaris container (logical IP takeover)</A> <A HREF="../hanet10/hanet324.htm" TARGET="fmain">B.8.5 Network configuration in the Solaris container (logical IP takeover)</A> <A HREF="../hanet11/hanet366.htm" TARGET="fmain">C.4.3.1 Check for consistency between Solaris container and network configuration</A> <A HREF="../hanet12/hanet370.htm" TARGET="fmain">D.1.1 INTERSTAGE Traffic Director and Solaris container</A> <A HREF="../hanet12/hanet383.htm" TARGET="fmain">D.2.2.6 Solaris container cannot be started</A> <B>Solaris Containers</B> <A HREF="../hanet13/hanet402.htm#Solaris_ZContainers" TARGET="fmain">Glossary</A> <B>Standby interface</B> <A HREF="../hanet13/hanet402.htm#Standby_Zinterface" TARGET="fmain">Glossary</A> <B>Standby patrol function</B> <A HREF="../hanet03/hanet053.htm" TARGET="fmain">2.2.9 Standby patrol function</A> <A HREF="../hanet04/hanet127.htm" TARGET="fmain">3.6.9 Standby patrol function</A> <A HREF="../hanet13/hanet402.htm#Standby_Zpatrol_Zfunction" TARGET="fmain">Glossary</A> <B>Standby patrol function (automatic fail-back if a failure occurs)</B> <A HREF="../hanet13/hanet402.htm#Standby_Zpatrol_Zfunction_Z(automatic_Zfail-back_Zif_Za_Zfailure_Zoccurs)" TARGET="fmain">Glossary</A> <B>Standby patrol function (immediate automatic failback)</B> <A HREF="../hanet13/hanet402.htm#Standby_Zpatrol_Zfunction_Z(immediate_Zautomatic_Zfailback)" TARGET="fmain">Glossary</A> <B>stphanet Command</B> <A HREF="../hanet08/hanet241.htm" TARGET="fmain">7.3 stphanet Command</A> <B>stpptl Command</B> <A HREF="../hanet08/hanet249.htm" TARGET="fmain">7.11 stpptl Command</A> <B>strhanet Command</B> <A HREF="../hanet08/hanet240.htm" TARGET="fmain">7.2 strhanet Command</A> <B>strptl Command</B> <A HREF="../hanet08/hanet248.htm" TARGET="fmain">7.10 strptl Command</A> <B>Switching function</B> <A HREF="../hanet03/hanet013.htm" TARGET="fmain">2.1.1.2 Switching function</A> <A HREF="../hanet03/hanet019.htm" TARGET="fmain">2.1.2.2 Switching function</A> <A HREF="../hanet03/hanet025.htm" TARGET="fmain">2.1.3.2 Switching function</A> <B><A NAME="label22">[T] </A></B><A HREF="#top">↑</A> <B>Tagged VLAN</B> <A HREF="../hanet13/hanet402.htm#Tagged_ZVLAN" TARGET="fmain">Glossary</A> <B>Tagged VLAN interface</B> <A HREF="../hanet03/hanet062.htm" TARGET="fmain">2.3.5 Multiplexing transfer route with Tagged VLAN interfaces</A> <A HREF="../hanet03/hanet063.htm" TARGET="fmain">2.3.5.1 Redundant Line Control function using Tagged VLAN interface</A> <A HREF="../hanet04/hanet142.htm" TARGET="fmain">3.7.3 Transfer route multiplexing with Tagged VLAN interface</A> <A HREF="../hanet06/hanet209.htm" TARGET="fmain">5.1.5 Tagged VLAN interface multiplexing on NIC switching mode (Standby)</A> <A HREF="../hanet13/hanet402.htm#Tagged_ZVLAN_Zinterface" TARGET="fmain">Glossary</A> <B>Takeover virtual interface</B> <A HREF="../hanet06/hanet221.htm" TARGET="fmain">5.2.2 Creating Takeover virtual interface</A> <A HREF="../hanet06/hanet227.htm" TARGET="fmain">5.4.2 Deleting Takeover virtual interface</A> <A HREF="../hanet13/hanet402.htm#Takeover_Zvirtual_Zinterface" TARGET="fmain">Glossary</A> <B>TCP relay function</B> <A HREF="../hanet02/hanet004.htm#TCP_Zrelay_Zfunction" TARGET="fmain">1.1 What is redundant line control?</A> <A HREF="../hanet10/hanet333.htm" TARGET="fmain">B.9.4 Example of the Single system in TCP relay function</A> <B><A NAME="label23">[U] </A></B><A HREF="#top">↑</A> <B>User command execution</B> <A HREF="../hanet13/hanet402.htm#User_Zcommand_Zexecution_Zfunction" TARGET="fmain">Glossary</A> <B>User command execution function</B> <A HREF="../hanet03/hanet056.htm" TARGET="fmain">2.2.12 User command execution function</A> <A HREF="../hanet04/hanet135.htm" TARGET="fmain">3.6.11 Setting User command execution function</A> <B><A NAME="label24">[V] </A></B><A HREF="#top">↑</A> <B>Virtual interface</B> <A HREF="../hanet13/hanet402.htm#Virtual_Zinterface" TARGET="fmain">Glossary</A> <B>Virtual IP address (virtual IP)</B> <A HREF="../hanet13/hanet402.htm#Virtual_ZIP_Zaddress_Z(virtual_ZIP)" TARGET="fmain">Glossary</A> <B><A NAME="label25">[W] </A></B><A HREF="#top">↑</A> <B>Web-Based Admin View</B> <A HREF="../hanet13/hanet402.htm#Web-Based_ZAdmin_ZView" TARGET="fmain">Glossary</A> </PRE>