Systemwalker Operation Manager Message Guide

[Windows]ACL Manager: INFO: 1: Systemwalker ACL Manager has started.

[Windows]ACL Manager: INFO: 2: Systemwalker ACL Manager has ended.

[Windows]ACL Manager: ERROR: 3: Systemwalker ACL Manager abnormally ended. %1 (%2)

[Windows]ACL Manager: WARNING: 6: The audit log is full. Create a backup file. (file name: %1)

[Windows]ACL Manager: WARNING: 7: The audit system log is full.Create a backup file. (file name: %1)

[Windows]ACL Manager: WARNING: 8: Could not generate an audit record. (%1)

[Windows]ACL Manager: WARNING: 9: Access control information was restored incompletely. For details, see %1 .

[Windows]ACL Manager: WARNING: 10: Failed to convert internal data for changed name of this computer or domain.(%1:%2)

[Windows]ACL Manager: WARNING: 15: Access control information was saved incompletely. For details, see %1 .

[Windows]ACL Manager: WARNING: 17: Failed to apply the policy information. File: %1

[Windows]ACL Manager: ERROR: 18: Systemwalker Operation Manager accounts are missing. Register all accounts used by Systemwalker Operation Manager.

[Windows]ACL Manager: ERROR: 19: An unexpected error occurred while applying the policy information. Detail code: %1

[Windows]ACL Manager: WARNING: 20: Failed to load the audit log library.

[Windows]ACL Manager: WARNING: 21: Failed to read the audit log file.

[Windows]MpAosfB: INFO: 1: Started Event Monitor service (MpAosfB).

[Windows]MpAosfB: INFO:2: Stopped Event Monitor service (MpAosfB).

[Windows]MpAosfB: ERROR: 4: Cannot activate Event Monitor service without administrator privileges.

[Windows]MpAosfB: INFO: 185: Past event has been retrieved. (ppp,eee,vvv)

[Windows]MpAosfB: INFO: 1000: The old messages are sequentially discarded, as the messages that can be managed by automization exceeded the maximum number (nnnn).

[Windows]MpAosfB: ERROR: 1001: Standard expression set in Monitored Event Table is improper. Line number : nnnn

Windows]MpAosfB: ERROR: 1009: Failed to connect socket. Reason : ssss

[Windows]MpAosfB: WARNING: 1021: The calendar name specified in action execution condition is not defined. Calendar name : cccc

[Windows]MpAosfB: WARNING: 1022: Error occurred in calendar service. Calendar name : cccc Error code : eeee

[Windows]MpAosfB: WARNING: 1023: Calendar service is not started.

[Windows]MpAosfB: ERROR: 1026: The Action Control Server is not started or is busy. Action : aaaa

[Windows]MpAosfB: ERROR: 1027: The environment that executes action is not set. Action : aaaa

[Windows]MpAosfB: ERROR: 1028: Error occurred in communicating with Action Management Server. Action : aaaa

[Windows]MpAosfB: ERROR:1029: Error occurred in Action Management Server. Action : cccc

[Windows]MpAosfB: ERROR: 1030: There is an error in the definition of Monitored Event Table. File name : ffff

[Windows]MpAosfB: WARNING: 1032: Too many actions are in queue on Action Management Server. Obsolete actions will be deleted from the queue.

[Windows]MpAosfB: WARNING: 1033: Too many actions are in queue. Obsolete actions will be deleted from the queue. (rrrr)

[Windows]MpAosfB: WARNING: 1034: More than cccc actions has been deleted from the queue. (rrrr)

[Windows]MpAosfB: WARNING: 1036: Definition of the action is invalid. (rrrr)

[Windows]MpAosfB: ERROR: 1037: Action Management Server is not installed properly. (rrrr)

[Windows]MpAosfB: WARNING: 1038: Specified user name, computer name or address is not defined. (rrrr)

[Windows]MpAosfB: WARNING: 1039: Specified application does not exist. (Application name = cccc)

[Windows]MpAosfB: WARNING: 1040: Specified startup directory does not exist. (Directory name = dddd)

[Windows]MpAosfB: ERROR: 1041: Failed to start the application. (Application name = cccc)

[Windows]MpAosfB: WARNING: 1042: Failed to open the socket to send SNMP trap. Detail code: cccc

[Windows]MpAosfB: ERROR: 1043: Failed to obtain the own host name for SNMP trap.

[Windows]MpAosfB: ERROR: 1044: Failed to obtain the target host name 'hhhh' to send SNMP trap. Detail code: cccc

[Windows]MpAosfB: ERROR: 1045: Failed to send SNMP trap. Detail code: cccc

[Windows]MpAosfB: ERROR: 1046: Access to the specified computer was denied to output to event log. (Computer name = hhhh)

[Windows]MpAosfB: ERROR: 1047: Specified computer is unavailable to output to event log. (Computer name = hhhh)

[Windows]MpAosfB: ERROR: 1050: Failed to open the event log file 'kkkk'.

[Windows]MpAosfB: ERROR: 1051: Failed to read the event log location file.

[Windows]MpAosfB: ERROR: 1052: Failed to write to the event log location file.

[Windows]MpAosfB: INFO: 1053: The format of the event log file 'kkkk' is invalid (nnnn). Reading the file again.

[Windows]MpAosfB: ERROR: 1054: Failed to read the event log file 'kkkk'.

[Windows]MpAosfB: ERROR: 1055: Setting of the log file to monitor is invalid. (File name = dddd)

[Windows]MpAosfB: ERROR: 1056: Failed to open the Monitored File Information file 'ffff'.

[Windows]MpAosfB: ERROR: 1058: An error occurred in the system function while monitoring the general log file. File name = dddd, System function: ffff, Cause: rrrr

[Windows]MpAosfB: WARNING: 1059: Specified log file to monitor does not exist. File name = dddd

[Windows]MpAosfB: WARNING: 1060: Cannot monitor the specified log file because it is stored on CD-ROM drive, removable disk or network drive. File name = dddd

[Windows]MpAosfB: WARNING: 1084: Too many parameters. Message is deleted. (ppp, rrr, mmm)

[Windows]MpAosfB: ERROR: 3000: Failed to initialize Action Management Server. System function name : ffff Reason : ssss

[Windows]MpAosfB: ERROR: 3001: The Action Management Server is shutdown, as abnormality occurred.

[Windows]MpAosfB: ERROR: 3002: Environment definition file does not exist.

[Windows]MpAosfB: ERROR: 3003: Action cannot be executed as memory is insufficient. Control number : iiii

[Windows]MpAosfB: ERROR: 3004: Action request cannot be received as memory is insufficient.

[Windows]MpAosfB: ERROR: 3005: Error occurred in system function. System function name : ffff Reason : ssss

[Windows]MpAosfB: ERROR: 3006: Failed to initialize socket. File name : ffff Reason : ssss

[Windows]MpAosfB: ERROR: 3007:Failed to initialize socket. Port : pppp Reason : ssss

[Windows]MpAosfB: ERROR: 3008: Failed to communicate with API.

[Windows]MpAosfB: ERROR: 3009: Failed to open code conversion table.

[Windows]MpAosfB: ERROR: 3010: List cannot be acquired as memory is insufficient.

[Windows]MpAosfB: ERROR: 3011: Failure in code conversion process.

[Windows]MpAosfB: ERROR: 3012: Failed to connect with Action Control window.

[Windows]MpAosfB: ERROR: 3013: Communication with Action Control window is cut off.

[Windows]MpAosfB: ERROR: 3014: Send destination is not specified.

[Windows]MpAosfB: ERROR: 3015: Action execution host is not specified. Action : aaaa

[Windows]MpAosfB: ERROR: 3016: Action execution server is not started. Host name : hhhh

[Windows]MpAosfB: ERROR: 3017: Action execution host does not exist. Host name : hhhh

[Windows]MpAosfB: ERROR: 3018: Failed to connect with Action Execution Server. Host name : hhhh Reason : ssss

[Windows]MpAosfB: ERROR: 3019: Error occurred in communication with Action Execution Server. Control number : iiii Host name : hhhh Reason : ssss

[Windows]MpAosfB: ERROR: 3020: Specified Action Execution Server is executing the actions according to the request of other server. Host name : hhhh Request source : jjjj

[Windows]MpAosfB: ERROR: 3021: System error occurred in Action Execution Server. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3022: The environment that executes action is not set. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3023: Action execution environment is not defined. Control number : iiii Host name :hhhh

[Windows]MpAosfB: ERROR: 3024: Failed to load Dynamic Link Library (llll). Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3050: The address of send source is not set.

[Windows]MpAosfB: ERROR: 3051: SMTP server is not set.

[Windows]MpAosfB: ERROR: 3052: Failed to connect to SMTP server. Check SMTP server status, contact SMTP server administrator with error code and message and take corrective measures. Server name: hhhh Reason: ssss

[Windows]MpAosfB: ERROR: 3053: Error occurred in communication process of SMTP server. Server name : hhhh Reason : ssss

[Windows]MpAosfB: ERROR: 3054: Connection to SMTP server is denied. Check SMTP server status, contact SMTP server administrator with error code and message and take corrective measures. Server name : hhhh Reason : ssss

[Windows]MpAosfB: ERROR: 3055: Failed to open file. File name : hhhh Reason : ssss

[Windows]MpAosfB: ERROR: 3056: Error occurred in input output process of file. Reason : ssss

[Windows]MpAosfB: ERROR: 3057: Failed to create work file. File name : ffff Reason : ssss

[Windows]MpAosfB: ERROR: 3058: SMTP server returned an error. Check the sender and the recipient addresses. If the specified addresses are correct, relay the error code and message to the administrator of the SMTP server. Server name: hhhh, Cause: ssss

[Windows]MpAosfB: ERROR: 3080: Profile name is not specified. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3081: Failed to login to MS-Mail. Control number : iiii Host name : hhhh Code : cccc

[Windows]MpAosfB: ERROR: 3082: Specified MS-Mail session does not exist. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3083: Failure in send process of MS-Mail. Control number : iiii Host name : hhhh Code : cccc

[Windows]MpAosfB: ERROR: 3084: Send destination address specified in MS-Mail send is inappropriate. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3085: Send file, which is specified in MS-Mail send, does not exist. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3086: Failed to open the send file specified in MS-Mail send. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3100: The Short Mail company has not been registered. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3101: Error occurred in code conversion process of message. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3102: COM port is not exist. ControlID:nnnn Host name : hhhh

[Windows]MpAosfB: ERROR: 3103: Access to COM port is denied. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3104: Failed to open COM port. Control number : iiii Host name : hhhh Code : cccc

[Windows]MpAosfB: ERROR: 3105: Error occurred in input output process of COM port. Control number : iiii Host name : hhhh Code : cccc

[Windows]MpAosfB: ERROR: 3106: Cannot contact to the Short Mail company because the line is busy. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3107: Carrier signals cannot be received from the telephone line. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3108: Received error signals from telephone line. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3109: Dial tone cannot be detected from the telephone line. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3110: There is no response from the telephone line. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3111: The telephone line was disconnected. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3112: Dialed number is blacklisted. ControlID:iiii Host name:hhhh

[Windows]MpAosfB: ERROR: 3150: Error occurred in send process of pop up message. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3151: Send destination address of pop up message cannot be acquired. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3152: Cannot execute action(POPUP) at Windows98/Me.

[Windows]MpAosfB: ERROR: 3200: Sound driver is not installed. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3201: Either the sound driver is not installed or it is being used in some other process. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3202: Sound driver is being used in some other process. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3203: Cannot open the dictionary used for voice reproduction. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3204: Failure in speech synthesis process. Control number : iiii Host name : hhhh Code : cccc Detailed code : dddd

[Windows]MpAosfB: ERROR: 3205: Sound driver does not support the waveform format that is used for voice reproduction. Control number : iiii Host name : hhhh

[Windows]MpAosfB: ERROR: 3206: System error occurred during sound reproduction. Control number : iiii Host name : hhhh Code : cccc Detailed code : dddd

[Windows]MpAosfB: ERROR: 3207: Failed to execute action. Action:aaaa Control number : iiii Host name : hhhh Code : cccc Detailed code : dddd

[Windows]MpAosfB: INFO: 4000: Event monitoring function service (MpAosfX) started.

[Windows]MpAosfB: INFO: 4002:Event monitoring function service (MpAosfX) stopped.

[Windows]MpAosfB: ERROR: 4003: Failed to initialize Action Execution Server.

[Windows]MpAosfB: ERROR: 4004: Failed to acquire installation information.

[Windows]MpAosfB: ERROR: 4005: Failed to initialize socket. Reason : ssss

[Windows]MpAosfB: ERROR: 4006: Action cannot be executed as memory is insufficient.

[Windows]MpAosfB: ERROR: 4007: Error occurred in socket function. Function : ffff Reason : ssss

[Windows]MpAosfB: ERROR: 4008: Action execution server is shutdown as thread ended abnormally.

[Windows]MpAosfB: ERROR: 4009: Error occurred in system function. Function name : ffff Reason : ssss

[Windows]MpAosfB: ERROR: 4010: Failed to load Dynamic Link Library (dddd). Reason : ssss

[Windows]MpAosfB: ERROR: 4011: The specified file does not exist. File name : ffff

[Windows]MpAosfB: ERROR: 4023: The action execution environment is not defined.

[Windows]MpAosfB: ERROR: 4080: The profile name is not specified.

[Windows]MpAosfB: ERROR: 4081: Failed in the MS-Mail log on. Reason : ssss

[Windows]MpAosfB: ERROR: 4082: Session of the specified MS-Mail does not exist.

[Windows]MpAosfB: ERROR: 4083: Failed in the transmission process of MS-Mail. Reason : ssss

[Windows]MpAosfB: ERROR: 4084: The address specified in MS-Mail is not correct.

[Windows]MpAosfB: ERROR: 4085: File specified in MS-Mail does not exist.

[Windows]MpAosfB: ERROR: 4086: Failed to open the file specified in MS-Mail.

[Windows]MpAosfB: ERROR: 4100: The specified Short Mail company has not been registered. Company name : cccc

[Windows]MpAosfB: ERROR: 4101: Error occurred in the conversion process of the message.

[Windows]MpAosfB: ERROR: 4104: Failed to open the COM port. Reason : ssss

[Windows]MpAosfB: ERROR: 4105: Error occurred in the input output process of COM port. Reason : ssss

[Windows]MpAosfB: ERROR: 4106: Cannot connect to the Short Mail company because the line is busy.

[Windows]MpAosfB: ERROR: 4107: Cannot receive carrier signals from telephone line.

[Windows]MpAosfB: ERROR: 4108: Received error signal from telephone line.

[Windows]MpAosfB: ERROR: 4109: Cannot detect dial tone from telephone line.

[Windows]MpAosfB: ERROR: 4110: There is no response from telephone line.

[Windows]MpAosfB: ERROR: 4111: The telephone line was disconnected.

[Windows]MpAosfB: ERROR: 4112: The dialed number is listed in the blacklist.

[Windows]MpAosfB: ERROR: 4200: The sound driver is not installed.

[Windows]MpAosfB: ERROR: 4201: The sound driver is not installed or it is being used in some other process.

[Windows]MpAosfB: ERROR: 4202: The sound driver is being used in some other process.

[Windows]MpAosfB: ERROR: 4203: Error occurred in audio reproduction. Code : cccc

[Windows]MpAosfB: ERROR: 4204: Failed to initialize voice synthesizer engine.

[Windows]MpAosfB: ERROR: 4205: No valid voice synthesizer engine is installed.

[Windows]MpAosfB: ERROR: 5004: Receive data is abnormal. Code : cccc Data : dddd

[Windows]MpAosfB: ERROR: 5005: Structure of definition file is abnormal. File name : ffff

[Windows]MpAosfB: ERROR: 5006: Failed to get the list of Short Mail companies.

[Windows]MpAosfB: WARNING: 5013: Failed to acquire the calendar service library. Process is carried out without calendar service.

[Windows]MpAosfB: WARNING: 5014: Failed to acquire system name list information library. Process is carried out considering that it is an environment in which system name list information does not exist.

[Windows]MpAosfB: ERROR: 5015: Error occurred in file operation.

[Windows]MpAosfB: ERROR: 5020: Stopped the window linkage function for Event Monitor.

[Windows]MpAosfB: WARNING: 5021: Event Monitoring Definition will be discarded as the Number of Definition has crossed Maximum.

[Windows]MpAosfB: ERROR: 7000: Memory is insufficient. Occurrence source : (ssss)

[Windows]MpAosfB: ERROR: 7001: The process ended. Process name : pppp End code : cccc

[Windows]MpAosfB: ERROR: 7002: Internal operation abnormality occurred. Occurrence source process name : (pppp)

[Windows]MpAosfB: ERROR: 7003: Failed to receive data. Occurrence source process name : pppp

[Windows]MpAosfB: ERROR: 7004: Failed to send data. Occurrence source process name : pppp

[Windows]MpAosfB: ERROR: 7005: Failed to open definition file. Reason : ssss File name : ffff Occurrence source process name : pppp

[Windows]MpAosfB: ERROR: 7006: Failed to read definition file. File name : ffff Occurrence source process name : pppp

[Windows]MpAosfB: ERROR: 7007: Failed to write definition file. File name : ffff Occurrence source process name : pppp

[Windows]MpAosfB: ERROR: 7008: Failed to receive data according to socket. Reason : ssss Occurrence source process name: pppp

[Windows]MpAosfB: ERROR: 7009: Failed to send data according to socket. Reason : ssss Occurrence source process name : pppp

[Windows]MpAosfB: ERROR: 7010: Failed to open definition file. Reason : ssss File name : ffff Occurrence source process name : pppp

[Windows]MpAosfB: ERROR: 7011: Error occurred in system function. Calling source : cccc System function name: ffff Reason : ssss

[Windows]MpAosfB: ERROR: 7012: An error is found in the received data. (Error source process = pppp) (Sender process = qqqq)

[Windows]MpAosfB: ERROR: 7013: Failed to get the common memory (mmmm).(Process name where error occurred: pppp)

[Windows]MpAosfB: ERROR: 7014: Failed to load the shared memory '%1'. (Error source process = %2)

[Windows]MpAosfP: INFO: 100: Systemwalker MpAosfP is normal start.

[Windows]MpAosfP: INFO: 101: Systemwalker MpAosfP is normal end.

[Windows]MpAosfP: ERROR: 102: Systemwalker MpAosfP is abnormal end.

[Windows]MpAosfP: ERROR: 104: Internal error occurs end of Process function name=ffff error code=cccc contents=dddd

[Windows]MpAosfP: INFO: 106: System Reboot Request is normal end.

[UNIX]MpAosfP: INFO: 106: System Reboot Request is normal end

[Windows]MpAosfP: INFO: 107: System Shutdown Request is normal end. < CCCC >

[UNIX]MpAosfP: INFO: 107: System Shutdown Request is normal end< CCCC >

[Windows]MpAosfP: INFO: 108: System Power Off Request is normal end. < CCCC >

[UNIX]MpAosfP: INFO: 108: System Power Off Request is normal end< CCCC >

[Windows]MpAosfP: ERROR: 109: System Reboot Request is abnormal end.

[Windows]MpAosfP: ERROR: 110: System Shutdown Request is abnormal end.

[Windows]MpAosfP: ERROR: 111: System Power Off Request is abnormal end, only System Shutdown is executed.

[Windows]MpAosfP: WARNING: 115: Creating End Event(iiii) fails, so this End Event is not use for waiting.

[Windows]MpAosfP: WARNING: 116: End Event is more than MAX(50).

[Windows]MpAosfP: WARNING: 117: Because failing open Service Database, can not execute service.

[Windows]MpAosfP: WARNING: 118: Fails executing Service(ssss).

[Windows]MpAosfP: WARNING: 119: Previous Service(tttt) is not executing, so Service(ssss) is not executed.

[Windows]MpAosfP: WARNING: 120: Previous Service(ssss) of Service(tttt) is not defined.

[Windows]MpAosfP: WARNING: 121: Fails executing Application(aaaa).

[Windows]MpAosfP: WARNING: 122: Previous Service(ssss) is none.

[Windows]MpAosfP: WARNING: 123: Service(ssss) is none.

[Windows]MpAosfP: WARNING: 124: Fails executing command(cccc).

MpAosfP: INFO: 127 : Waiting for End Event(iiii) is not canceled.

[Windows]MpAosfP: WARNING: 128: uuuu session is not canceled.

[Windows]MpAosfP: ERROR: 129: Fails dynamic allocation, so process does not continue.

[Windows]MpAosfP: WARNING: 132: Internal error occurs function name=ffff error code=cccc contents=dddd

[UNIX]MpAosfP: INFO: 132: Internal error occurs function name=ffff error code=cccc contents=dddd

MpAosfP: WARNING: 133: Specified Power Control Hardware does not support that next system schedule is dddd after cccc days.

[Windows]MpAosfP: WARNING: 134: Next system start is not scheduled.

[Windows]MpAosfP: ERROR: 136: upssleep is not found, so set power chute plus or system path(path=XXX).

[Windows]MpAosfP: ERROR: 137: PMAN/L power control command is not found, so set PMAN or system path(path=XXX).

[Windows]MpAosfP: ERROR: 138: Because of Dynamic allocation fails, Automatic Operations Support Facility is stop.

[Windows]MpAosfP: ERROR: 139: Automatic Operations Support Facility is wrong, reinstall Automatic Operations Support Facility.

[Windows]MpAosfP: ERROR: 156: MpStpSv is not found, so set Power Control Software or system path(path=XXX).

[Windows]MpAosfP: WARNING: 200: SMTP server name is not specified.

[Windows]MpAosfP: WARNING: 232: User name for Popup message occurs error.

MpAosfP: WARNING: 234: Popup message process occurs error.

[Windows]MpAosfP: WARNING: 235: Popup message sending process occurs error.

[Windows]MpAosfP: WARNING: 236: Domain is none, or Server is none.

[Windows]MpAosfP: WARNING: 271: Systemwalker Centric Manager is not installed, no notice to stop is sent.

MpAosfP: WARNING: 272: Because the action control server is not operating, no notice is sent.

MpAosfP: WARNING: 273: Because memory is lack, E-Mail sending request is not executed.

MpAosfP: WARNING: 301: Fails Power Off for the target agent(hhhh).

[Windows]MpAosfP: WARNING: 1000: Host name is none

[Windows]MpAosfP: WARNING: 1001: Host name length is more than 256.

[Windows]MpAosfP: ERROR: 1002: PMAN/L Power Control API parameter error.

[Windows]MpAosfP: ERROR: 1003: PMAN/L Power Control Environment error.

[Windows]MpAosfP: ERROR: 1004: PMAN/L Power Control send/recv error

[Windows]MpAosfP: WARNING: 1005: PMAN/L Power Control schedule error.

[Windows]MpAosfP: WARNING: 1006: PMAN/L Power Control is prohibited power off/on.

[Windows]MpAosfP: WARNING: 1007: For Key controlling, Power Control is not done.

[Windows]MpAosfP: WARNING: 1008: The light goes out, Power Control is not done.

[Windows]MpAosfP: WARNING: 1009: Power off is already done.

[Windows]MpAosfP: WARNING: 1100: Parameter is none.

[Windows]MpAosfP: ERROR: 1101: Socket can not be opened.

[Windows]MpAosfP: WARNING: 1102: Fails getting self hostname.

MpAosfP: WARNING: 1103: Host name resolution error.

MpAosfP: ERROR: 1104 Internal error occurs.

[Windows]MpAosfP: ERROR: 1105: Send error occurs.

[Windows]MpAosfP: ERROR: 1107: PMAN/L control dll(F3DMIF32.DLL) is none.

[Windows]MpAuditLogO: ERROR: 1: The audit log was not able to be initialized. The log is not output to the operation after this.(target:file, detail code:error string)[UNIX]MpAuditLogO: ERROR: 001: The audit log was not able to be initialized. The log is not output to the operation after this.(target:file, detail code:error string)

[Windows]MpAuditLogO: ERROR: 2: The audit log was not able to be output. The log is not output to the operation after this. (target:file, detail code:error string)[UNIX]MpAuditLogO: ERROR: 002: The audit log was not able to be output. The log is not output to the operation after this. (target:file, detail code:error string)

[Windows]MpAuditLogO: INFO: 3: The audit log output is restarted. (target:file)[UNIX]MpAuditLogO: INFO: 003: The audit log output is restarted. (target:file)

[Windows]MpAuditLogO: WARNING: 5: There is an invalid value to the audit log definition file. Processing is continued by initialization. (target:file, section:section, key:key, detail code:error string)[UNIX]MpAuditLogO: WARNING: 005: There is an invalid value to the audit log definition file. Processing is continued by initialization. (target:file, section:section, key:key, detail code:error string)

[Windows]MpAuditLogO: INFO: 6: Audit log settings have been modified. Audit log is now enabled. (LOG NAME: log name)[UNIX]MpAuditLogO: INFO: 006: Audit log settings have been modified. Audit log is now enabled. (LOG NAME: log name)

[Windows]MpAuditLogO: INFO: 7: Audit log settings have been modified. Audit log is now disabled. (LOG NAME: log name)[UNIX]MpAuditLogO: INFO: 007: Audit log settings have been modified. Audit log is now disabled. (LOG NAME: log name)

[UNIX]Mpcmtoolo: INFO: 00000: backup ended.

[UNIX]Mpcmtoolo: ERROR: 00001: backup ended abnormally.

[UNIX]Mpcmtoolo: ERROR: 00002: %1

[UNIX]Mpcmtoolo: INFO: 00100: restore ended.

[UNIX]Mpcmtoolo: ERROR: 00101: restore ended abnormally.

[UNIX]Mpcmtoolo: ERROR: 00102: %1

[UNIX]Mpcmtoolo: WARNING: 00401: The node(%1) may not be added completely. Please make a node addition manually.

[UNIX]Mpcmtoolo: WARNING: 00402: The node(%1) may not be deleted completely. Please make a node deletion manually.

[UNIX]Mpcmtoolo: WARNING: 10000: Failed to load the audit log library.

[UNIX]Mpcmtoolo: WARNING: 10001: Failed to read the audit log file.

[Windows]mpcmtoolo: WARNING: 401: The node(%1) may not be added completely. Please make a node addition manually.

[Windows]mpcmtoolo: WARNING: 402: The node(%1) may not be deleted completely. Please make a node deletion manually.

[Windows]mpcmtoolo: ERROR: 1100: Failed to %1.(%2)

[Windows]mpcmtoolo:INFO: 1101: Backup was ended normally.

[Windows]mpcmtoolo:INFO: 1102: Restoration was ended normally.

[Windows]Mpcmtoolo: WARNING: 10000: Failed to load the audit log library.

[Windows]Mpcmtoolo: WARNING: 10001: Failed to read the audit log file.

[UNIX]MpFwsec: INFO: 00001: Systemwalker ACL Manager has started.

[UNIX]MpFwsec: INFO: 00002: Systemwalker ACL Manager has ended.

[UNIX]MpFwsec: ERROR: 00003: Systemwalker ACL Manager has abnormally ended.(%1:%2)

[UNIX]MpFwsec: WARNING: 00005: IPC key is already in use. (Key: %1)

[UNIX]MpFwsec: WARNING: 00006: The audit log is full. Create a backup file.(File name:%1)

[UNIX]MpFwsec: WARNING: 00007: The audit setup log is full. Create a backup file.(file name:%1)

[UNIX]MpFwsec: WARNING: 00008: Could not generate an audit record.(%1)

[UNIX]MpFwsec: WARNING: 00009: Access control information was restored incompletely. For details, see %1.

[UNIX]MpFwsec: INFO: 00011: Created semaphore. (id: %1 key: %2)

[UNIX]MpFwsec: INFO: 00012: Deleted semaphore. (id: %1)

[UNIX]MpFwsec: WARNING: 00015: The system could not backup the access control information for some functions. For details, see %1.

[UNIX]MpFwsec: WARNING: 00016: Unable to create a semaphore.

[UNIX]MpFwsec: WARNING: 00017: %1 Failed to set up policy information.

[UNIX]MpFwsec: ERROR: 00018: Account being used in Systemwalker Operation Manager does not exist. Register all accounts that use Systemwalker Operation Manager.

[UNIX]MpFwsec: ERROR: 00019: An unexpected error occurred when policy information was set up. detail code (%1).

[UNIX]MpFwsec: WARNING: 00020: Failed to load the audit log library.

[UNIX]MpFwsec: WARNING: 00021: Failed to read the audit log file.

[UNIX]mpipcmgr: WARNING: 00304: Systemwalker Operation Manager cannot manage IPC resources.

[UNIX]mpipcmgr: WARNING: 00305: When stopping, Systemwalker Operation Manager could not remove some IPC resources.

[UNIX]mpipcmgr: WARNING: 00306: Systemwalker Operation Manager could not remove the following IPC resource.(TYPE=%1, ID=%2, KEY=%3)

[UNIX]mpipcmgr: WARNING: 00307: Systemwalker cannot manage IPC resources.

[UNIX]mpipcmgr: WARNING: 00308: When stopping, Systemwalker could not remove some IPC resources.

[UNIX]mpipcmgr: WARNING: 00309: Systemwalker could not remove the following IPC resource.(TYPE=%1, ID=%2, KEY=%3)

[UNIX]MpJmCal: INFO: 0001: MpJmCal started.

[UNIX]MpJmCal: INFO: 0002: MpJmCal stopped.

[UNIX]MpJmCal: ERROR: 0003: Insufficient memory.(ret = RRRR , detail = DDDD , FFFF)

[UNIX]MpJmCal: ERROR: 0004: Failure in file operation.(ret = RRRR , detail = DDDD , FFFF)

[UNIX]MpJmCal: ERROR: 0005: MpJmCal(ret = RRRR , detail = DDDD , MMMM)

[UNIX]MpJmCal: ERROR: 0006: Internal error occurs.(ret = RRRR , detail = DDDD , FFFF)

[UNIX]MpJmCal: ERROR: 0007: FFFF() MMMM (DDDD)

[Windows]MpJmCal: WARNING: 1: Failed to open trace file. (XXXX)

[Windows]MpJmCal: WARNING: 3: Failure in trace output. (XXXX)

[Windows]MpJmCal: INFO: 4: Systemwalker MpJmCal service started.

[Windows]MpJmCal: INFO: 5: Systemwalker MpJmCal service stopped.

[Windows]MpJmCal: ERROR: 6: Insufficient memory. (XXXX)

[Windows]MpJmCal: ERROR: 7: Failure in file operation. (XXXX)

MpJmCal: WARNING: 0011: XXXX The daemon failed to set policy information.

MpJmCal: WARNING: 0012: Unable to get the reschedule date on the calendar.

MpJmCal: WARNING: 8736: Failed to load the audit log library.

MpJmCal: WARNING: 8737: Failed to read the audit log file.

[UNIX]MpJmSrv: WARNING: 0001: XXXX The trace function cannot be used.

[UNIX]MpJmSrv: ERROR: 0002: The LANG value is incorrect.

[UNIX]MpJmSrv: ERROR: 0003: The mpjmsrv argument is incorrect.

[UNIX]MpJmSrv: ERROR: 0004: Failure in communicating with the Systemwalker Operation Manager (client).

[UNIX]MpJmSrv: ERROR: 0005: Failure in connecting with the Systemwalker Operation Manager (client).

[UNIX]MpJmSrv: ERROR: 0006: Host name is too long.

[UNIX]MpJmSrv: ERROR: 0007: Failure in port number (tcp) acquisition for communication with the Systemwalker Operation Manager (client).

[UNIX]MpJmSrv: ERROR: 0008: Restart the daemon.

[UNIX]MpJmSrv: ERROR: 0009: Failure in IP address acquisition.

[UNIX]MpJmSrv: ERROR: 0010: Failed in the control of the communication.

[UNIX]MpJmSrv: INFO: 0011: mpjmsrv Daemon has started.

[UNIX]MpJmSrv: INFO: 0012: mpjmsrv Daemon has ended.

[UNIX]MpJmSrv: ERROR: 0013: The mpjmsrv failed to create shared memory.

[UNIX]MpJmSrv: ERROR: 0014: The mpjmsrv failed to attach shared memory.

[UNIX]MpJmSrv: ERROR: 0015: The mpjmsrv already started.

[UNIX]MpJmSrv: WARNING: 0016: XXXX The IPC resource which corresponds to this key already exists.

[UNIX]MpJmSrv: INFO: 0017: XXXX The IPC resource which corresponded to this key was made.

[UNIX]MpJmSrv: ERROR: 0018: The mpjmsrv failed to open the file for IPC resource.

[UNIX]MpJmSrv: ERROR: 0020: Invalid argument passed to the multi-server monitoring daemon.

[UNIX]MpJmSrv: ERROR: 0021: Cannot obtain the host name.

[UNIX]MpJmSrv: ERROR: 0022: Failed to connect to the multi-server monitoring (client).

[UNIX]MpJmSrv: ERROR: 0023: XXXX Failed to communicate with the monitored host.

[UNIX]MpJmSrv: ERROR: 0024: Cannot find the monitored host.

[UNIX]MpJmSrv: ERROR: 0025: Cannot control the monitored host.

[UNIX]MpJmSrv: ERROR: 0026: Access denied by the monitored host.

[UNIX]MpJmSrv: INFO: 0027: XXXX() YYYY

[UNIX]MpJmSrv: ERROR: 0028: XXXX() YYYY

[UNIX]MpJmSrv: ERROR: 0029: Failed to load a library.

[UNIX]MpJmSrv: ERROR: 0030: XXXX Access denied.

[UNIX]MpJmSrv: INFO: 0031: XXXX Failed to communicate with the monitored host.

[UNIX]MpJmSrv: INFO: 0032: Failed to communicate with the multi-server monitoring (client).

[UNIX]MpJmSrv: ERROR: 0033: Failed to communicate with the multi-server monitoring (client).

[UNIX]MpJmSrv: INFO: 0034: Failure in communicating with the Systemwalker Operation Manager (client).

[UNIX]MpJmSrv: INFO: 0035: Cannot control the monitored host.

[UNIX]MpJmSrv: INFO: 0036: Access denied by the monitored host.

[UNIX]MpJmSrv: ERROR: 0037: An error has been detected in Systemwalker ACL Manager (API). (code = XXXX, YYYY)

[UNIX]MpJmSrv: WARNING: 0038: Failed to load the audit log library.

[UNIX]MpJmSrv: WARNING: 0039: Failed to read the audit log file.

[UNIX]MpJmSrv: INFO: 0040: Systemwalker User Management function cannot be used.

[Windows]MpJmSrv: WARNING: 1: XXXX The trace function cannot be used.

[Windows]MpJmSrv: ERROR: 2: The LANG value is incorrect.

[Windows]MpJmSrv: ERROR: 3: The mpjmsrv argument is incorrect.

[Windows]MpJmSrv: ERROR: 4: Failure in communicating with the Systemwalker Operation Manager (client).

[Windows]MpJmSrv: ERROR: 5: Failure in connecting with the Systemwalker Operation Manager (client).

[Windows]MpJmSrv: ERROR: 6: Host name is too long.

[Windows]MpJmSrv: ERROR: 7: Failure in port number (tcp) acquisition for communication with the Systemwalker OperationMGR (client).

[Windows]MpJmSrv: ERROR: 8: Please restart Systemwalker MpJmSrv in 1 minute.

[Windows]MpJmSrv: ERROR: 9: Failure in IP address acquisition.

[Windows]MpJmSrv: ERROR: 10: Failed in the control of the communication.

[Windows]MpJmSrv: INFO: 11: Systemwalker MpJmSrv has started.

[Windows]MpJmSrv: INFO: 12: Systemwalker MpJmSrv has ended.

[Windows]MpJmSrv: ERROR: 13: The mpjmsrv failed to create shared memory.

[Windows]MpJmSrv: ERROR: 14: The mpjmsrv failed to attach shared memory.

[Windows]MpJmSrv: ERROR: 19: Not enough memory for new process.

[Windows]MpJmSrv: ERROR: 20: Invalid argument passed to tskhmsrv.

[Windows]MpJmSrv: ERROR: 21: Cannot obtain the host name.

[Windows]MpJmSrv: ERROR: 22: Failed to connect to the multi-server monitoring (client).

[Windows]MpJmSrv: ERROR: 23: Failed to communicate with the monitored host. (XXXX)

[Windows]MpJmSrv: ERROR: 24: Cannot find the monitored host.

[Windows]MpJmSrv: ERROR: 25: Cannot control the monitored host.

[Windows]MpJmSrv: ERROR: 26: Access denied by the monitored host.

[Windows]MpJmSrv: ERROR: 29: Failed to load a library.

[Windows]MpJmSrv: INFO: 31: XXXX Failed to communicate with the monitored host.

[Windows]MpJmSrv: INFO: 32: Failed to communicate with the multi-server monitoring (client).

[Windows]MpJmSrv: ERROR: 33: Failed to communicate with the multi-server monitoring (client).

[Windows]MpJmSrv: INFO: 34: Failure in communicating with the Systemwalker Operation Manager (client).

[Windows]MpJmSrv: INFO: 35: Cannot control the monitored host.

[Windows]MpJmSrv: INFO: 36: Access denied by the monitored host.

[Windows]MpJmSrv: ERROR: 37: An error has been detected in Systemwalker ACL Manager (API). (code = XXXX, YYYY)

[Windows]MpJmSrv: WARNING: 38: Failed to load the audit log library.

[Windows]MpJmSrv: WARNING: 39: Failed to read the audit log file.

[Windows]MpJmSrv: INFO: 40: Systemwalker User Management function cannot be used.

[Windows]MpJmSrv: ERROR: 2027: func=XXXX:YYYY() CCCC:ZZZZ

[Windows]MpJmSrv: ERROR: 2028: func=XXXX:YYYY() Socket function return code (code = ZZZZ)

[Windows]MpJmSrv: ERROR: 7000: func=XXXX:YYYY() ZZZZ

[Windows]MpJmSrv: ERROR: 7300: func=XXXX:YYYY() CCCC:ZZZZ

[Windows]MpJmSrv: ERROR: 8301: func=XXXX:YYYY() Socket function error occurred.(code = ZZZZ)

[UNIX]MpJobsch: ERROR: 0001: The daemon failed to activate the abnormal exit routine of the job net.

[UNIX]MpJobsch: ERROR: 0002: The jobscheduler job net daemon argument is incorrect.

[UNIX]MpJobsch: ERROR: 0005: The daemon failed to register the project.

[UNIX]MpJobsch: ERROR: 0006: The jobscheduler failed to read job net information.

[UNIX]MpJobsch: ERROR: 0007: The jobscheduler failed to write job net information.

[UNIX]MpJobsch: ERROR: 0008: The jobscheduler failed to retrieve the current time.

[UNIX]MpJobsch: ERROR: 0009: The jobscheduler failed to create shared memory.

[UNIX]MpJobsch: ERROR: 0012: XXXX is trapped.

[UNIX]MpJobsch: ERROR: 0014: The daemon was not started.

[UNIX]MpJobsch: ERROR: 0015: Information on the job net not found.

[UNIX]MpJobsch: ERROR: 0016: DBPATH not found.

[UNIX]MpJobsch: ERROR: 0017: The jobscheduler failed to attach shared memory.

[UNIX]MpJobsch: ERROR: 0022: XXXX Erroneous record exists in job net information.

[UNIX]MpJobsch: ERROR: 0023: The jobscheduler message command argument is incorrect.

UNIX]MpJobsch: INFO: 0024: The jobscheduler communicate with the POP3 server.

[UNIX]MpJobsch: ERROR: 0025: The jobscheduler failed to read message events information.

[UNIX]MpJobsch: ERROR: 0026: The jobscheduler failed in loading a library.

[UNIX]MpJobsch: ERROR: 0027: The jobscheduler failed to retrieve day change time.Make sure that the calendar daemon has been started.

[UNIX]MpJobsch: ERROR: 0029: The number of projects has exceeded the maximum number (1000).

[UNIX]MpJobsch: ERROR: 0030: Project information in shared memory does not exist.

[UNIX]MpJobsch: ERROR: 0031: Job information does not exist.

[UNIX]MpJobsch: ERROR: 0033: XXXX The daemon failed to set policy information.[UNIX]MpJobsch: WARNING: 0033: XXXX The daemon failed to set policy information.

[UNIX]MpJobsch: ERROR: 0034: Failure in reading project information.

[UNIX]MpJobsch: ERROR: 0036: The daemon failed to retrieve job net output information.

[UNIX]MpJobsch: ERROR: 0037: The daemon failed to write job net output information.

[UNIX]MpJobsch: ERROR: 0038: The daemon fails to write log information.

[UNIX]MpJobsch: ERROR: 0039: Failure in daemon activation.

[UNIX]MpJobsch: ERROR: 0040: Failed to read parameters for execution.

[UNIX]MpJobsch: ERROR: 0043: XXXX The jobscheduler failed to read job net information file.

[UNIX]MpJobsch: ERROR: 0044: XXXX The jobscheduler failed to write job net information file.

[UNIX]MpJobsch: ERROR: 0046: The daemon failed to write log information.

[UNIX]MpJobsch: ERROR: 0051: The jobscheduler failed to open schedule pattern file.

[UNIX]MpJobsch: INFO: 0053: The jobscheduler daemon has ended.

[UNIX]MpJobsch: ERROR: 0055: The daemon failed to delete a file for a duplicated start check.

[UNIX]MpJobsch: ERROR: 0060: The jobscheduler failed to read the schedule pattern file.

[UNIX]MpJobsch: ERROR: 0061: Job information of the job net information file not found.

[UNIX]MpJobsch: ERROR: 0063: The daemon already started.

[UNIX]MpJobsch: ERROR: 0090: Calendar information not found.

[UNIX]MpJobsch: ERROR: 0093: The jobscheduler failed to update calendar information.

[UNIX]MpJobsch: ERROR: 0096: User does not belong to root group.

[UNIX]MpJobsch: ERROR: 0097: Restart the daemon.

[UNIX]MpJobsch: ERROR: 0100: The jobscheduler failed to read/modify calendar information.

[UNIX]MpJobsch: ERROR: 0103: The job net is not found.

[UNIX]MpJobsch: ERROR: 0104: The job net name is incorrect.

[UNIX]MpJobsch: ERROR: 0119: The communication management process cannot be generated.

[UNIX]MpJobsch: ERROR: 0120: The host name in the monitor host file is too long.

[UNIX]MpJobsch: ERROR: 0122: The jobscheduler failed to send job net operation information.

[UNIX]MpJobsch: ERROR: 0123: The jobscheduler failed to receive job net monitor information.

[UNIX]MpJobsch: ERROR: 0128: The jobscheduler communication process argument is incorrect.

[UNIX]MpJobsch: ERROR: 0129: The jobscheduler failed to read the monitor host file.

[UNIX]MpJobsch: ERROR: 0130: Failure in host name retrieval.

[UNIX]MpJobsch: ERROR: 0131: Failure in Host IP address retrieval.

[UNIX]MpJobsch: ERROR: 0132: Failure in port number (tcp) acquisition for communication with the monitored host.

[UNIX]MpJobsch: ERROR: 0133: Failure in communicating with the monitored host.

[UNIX]MpJobsch: ERROR: 0134: Failed in the control of the communication.

[UNIX]MpJobsch: ERROR: 0135: Failure in communicating with the jobschmsm command.

[UNIX]MpJobsch: WARNING: 0136: The host name in the monitor authorization host file is too long.

[UNIX]MpJobsch: ERROR: 0137: The monitored host is not found.

[UNIX]MpJobsch: ERROR: 0138: Failure in port number (udp) acquisition for communication with the monitored host.

[UNIX]MpJobsch: ERROR: 0140: Monitored host information not found.

[UNIX]MpJobsch: ERROR: 0141: The jobscheduler failed to create job net output information.

[UNIX]MpJobsch: ERROR: 0142: The daemon failed to activate the abnormal exit routine of the job net.

[UNIX]MpJobsch: ERROR: 0143: The daemon failed to activate the non-communication exit routine.

[UNIX]MpJobsch: ERROR: 0144: The jobscheduler multisystem monitor daemon argument is incorrect.

[UNIX]MpJobsch: ERROR: 0145: Failure in communicating with the monitoring host.

[UNIX]MpJobsch: ERROR: 0147: Failure in port number (tcp) acquisition for communication with the monitoring host.

[UNIX]MpJobsch: ERROR: 0148: Job net information is not found.

[UNIX]MpJobsch: ERROR: 0149: Failure to communicate among daemon processes.

[UNIX]MpJobsch: ERROR: 0151: The jobscheduler failed to read job net output information.

[UNIX]MpJobsch: ERROR: 0154: Failure in holiday shifting.

[UNIX]MpJobsch: ERROR: 0156: The jobscheduler fails to read model information.

[UNIX]MpJobsch: ERROR: 0157: Check for other users of jobschmsm command or restart later.

[UNIX]MpJobsch: ERROR: 0158: XXXX The jobscheduler failed to write job net information.

[UNIX]MpJobsch: ERROR: 0159: JOBEXE_PATH is too long.

[UNIX]MpJobsch: ERROR: 0160: Failure in IP address acquisition.

[UNIX]MpJobsch: ERROR: 0161: The jobscheduler failed to read information on the monitor authorization host file.

[UNIX]MpJobsch: ERROR: 0163: Failure in Job Execution Control machine ID acquisition.

[UNIX]MpJobsch: ERROR: 0164: The jobscheduler failed to send job net information.

[UNIX]MpJobsch: ERROR: 0166: The jobscheduler Job Execution Control job net daemon argument is incorrect.

[UNIX]MpJobsch: ERROR: 0167: There are incorrect host names in the monitor host file.

[UNIX]MpJobsch: WARNING: 0168: There are incorrect host names in the monitor authorization host file.

[UNIX]MpJobsch: ERROR: 0174: Failure in Job Execution Control job activation.

[UNIX]MpJobsch: ERROR: 0179: XXXX failed in the backup.

[UNIX]MpJobsch: ERROR: 0182: XXXX project name is too long.

[UNIX]MpJobsch: ERROR: 0183: The jobscheduler failed to generate a file for a duplicated start check.

[UNIX]MpJobsch: ERROR: 0184: The monitor host file is not found.

[UNIX]MpJobsch: ERROR: 0189: XXXX YYYY Failure in job net generation.

[UNIX]MpJobsch: ERROR: 0190: XXXX YYYY Failure in job net execution.

[UNIX]MpJobsch: ERROR: 0191: XXXX cannot be executed.

[UNIX]MpJobsch: ERROR: 0192: The daemon failed to activate the exit routine (log file switching).

[UNIX]MpJobsch: ERROR: 0193: The jobscheduler E-Mail daemon argument is incorrect.

[UNIX]MpJobsch: WARNING: 0194: Failure in communicating with the POP3 server.

[UNIX]MpJobsch: ERROR: 0195: Network license cannot be initialized.

[UNIX]MpJobsch: ERROR: 0196: Network license cannot be retrieved.

[UNIX]MpJobsch: ERROR: 0197: The jobscheduler communication daemon argument is incorrect.

[UNIX]MpJobsch: INFO: 0198: Failure in communicating with the jobscheduler (client).[UNIX]MpJobsch: ERROR: 0198: Failure in communicating with the jobscheduler (client).

[UNIX]MpJobsch: ERROR: 0199: Failure in connecting with the jobscheduler (client).

[UNIX]MpJobsch: ERROR: 0200: Host name is too long.

[UNIX]MpJobsch: ERROR: 0201: Failure in port number (tcp) acquisition for communication with the PC.

[UNIX]MpJobsch: ERROR: 0202: Restart the daemon.

[UNIX]MpJobsch: ERROR: 0203: Failure in last log information acquisition.

[UNIX]MpJobsch: ERROR: 0204: Erroneous record found in calendar information.

[UNIX]MpJobsch: ERROR: 0206: The daemon failed in the re-schedule.

[UNIX]MpJobsch: ERROR: 0208: The jobscheduler failed to read log information.

[UNIX]MpJobsch: ERROR: 0212: XXXX The jobscheduler fails to read group information file.

[UNIX]MpJobsch: ERROR: 0214: The jobscheduler failed to read group information.

[UNIX]MpJobsch: ERROR: 0215: XXXX Erroneous record found in group information.

[UNIX]MpJobsch: ERROR: 0216: XXXX YYYY is deleted because it is an invalid group.

[UNIX]MpJobsch: ERROR: 0218: XXXX The jobscheduler failed to write group information file.

[UNIX]MpJobsch: ERROR: 0219: The jobscheduler failed to write group information.

[UNIX]MpJobsch: INFO: 0221: The size of log information has exceeded the maximum value.

[UNIX]MpJobsch: ERROR: 0222: The daemon failed to activate the log information switch exit routine.

[UNIX]MpJobsch: ERROR: 0223: The jobscheduler failed to send group information.

[UNIX]MpJobsch: WARNING: 0224: XXXX YYYY is not yet finished. Schedule will be done after the job net ends.

[UNIX]MpJobsch: ERROR: 0226: The group is being saved or controlled.

[UNIX]MpJobsch: ERROR: 0249: The jobscheduler host summary daemon argument is incorrect.

[UNIX]MpJobsch: ERROR: 0255: The jobscheduler event daemon argument is incorrect.

[UNIX]MpJobsch: ERROR: 0257: The daemon failed to activate the day-change-time-notice exit routine.

[UNIX]MpJobsch: ERROR: 0258: XXXX user name is too long.

[UNIX]MpJobsch: ERROR: 0266: The group information is inconsistent.

[UNIX]MpJobsch: ERROR: 0267: Failure in port number (tcp) acquisition for communication with the jobscheduler communication daemon.

[UNIX]MpJobsch: INFO: 0272: The jobscheduler daemon has been started.

[UNIX]MpJobsch: ERROR: 0273: The daemon is being started.

[UNIX]MpJobsch: WARNING: 0276: The LANG value is incorrect.

[UNIX]MpJobsch: ERROR: 0277: PowerAIM is not supported.

[UNIX]MpJobsch: WARNING: 0284: XXXX Failed in the host information acquisition in the monitor authorization host file.

[UNIX]MpJobsch: ERROR: 0285: The jobscheduler PowerAIM job net daemon argument is incorrect.

[UNIX]MpJobsch: WARNING: 0286: XXXX The trace function cannot be used.

[UNIX]MpJobsch: INFO: 0287: XXXX YYYY did not start.

[UNIX]MpJobsch: ERROR: 0295: The daemon failed to activate the job exit routine.

[UNIX]MpJobsch: ERROR: 0299: The database has not been converted.

[UNIX]MpJobsch: WARNING: 0310: XXXX YYYY did not start at scheduled time.

[UNIX]MpJobsch: WARNING: 0311: XXXX YYYY did not finish before Estimated end time.

[UNIX]MpJobsch: INFO: 0328: The job net has started. JobNetComment=XXXX JobNetName=YYYY ProjectName=ZZZZ

[UNIX]MpJobsch: INFO: 0329: The job net has normal ended. JobNetComment=XXXX JobNetName=YYYY Code=CCCC ProjectName=ZZZZ

[UNIX]MpJobsch: ERROR: 0330: The job net has abnormal ended. JobNetComment=XXXX JobNetName=YYYY Code=CCCC ProjectName=ZZZZ

[UNIX]MpJobsch: WARNING: 0331: The job net has refused. JobNetComment=XXXX JobNetName=YYYY ProjectName=ZZZZ

[UNIX]MpJobsch: WARNING: 332: The job net has skipped. JobNetComment=XXXX JobNetName=YYYY ProjectName=ZZZZ

[UNIX]MpJobsch: INFO: 0333: The job net has pseudo-normal ended. JobNetComment=XXXX JobNetName=YYYY Code=CCCC ProjectName=ZZZZ

[UNIX]MpJobsch: ERROR: 0337: The daemon failed to activate the activation delay exit routine of the job net.

[UNIX]MpJobsch: ERROR: 0338: The daemon failed to activate the termination delay exit routine of the job net.

[UNIX]MpJobsch: WARNING: 0340: The daemon failed to set virtual time.

[UNIX]MpJobsch: WARNING: 0341: The virtual time is set as a past time.

[UNIX]MpJobsch: ERROR: 0342: swadmin isn't registered in /etc/group.

[UNIX]MpJobsch: ERROR: 0343: The daemon failed in the security reinforcement.

[UNIX]MpJobsch: WARNING: 0345: XXXX The IPC resource which corresponds to this key already exists.

[UNIX]MpJobsch: INFO: 0346: XXXX The IPC resource which corresponded to this key was made.

[UNIX]MpJobsch: ERROR: 0347: The jobscheduler failed to open the file for IPC resource.

[UNIX]MpJobsch: WARNING: 0348: The daemon failed in the security release.

[UNIX]MpJobsch: ERROR: 0366: The jobscheduler failed to read parameter information file.

[UNIX]MpJobsch: ERROR: 0374: XXXX Access denied.

[UNIX]MpJobsch: INFO: 0381: XXXX() YYYY

[UNIX]MpJobsch: ERROR: 0412: XXXX() YYYY

[UNIX]MpJobsch: ERROR: 0416: The project is not found.

[UNIX]MpJobsch: ERROR: 0417: The message event name is not found.

[UNIX]MpJobsch: ERROR: 0422: Failed to convert the standard output or the standard error code for the job. The job result file contains illegal characters.

[UNIX]MpJobsch: WARNING: 0423: There are not enough message queue resources. This may degrade performance in job processing. Refer to the manual and increase the size of message queue resources.

[UNIX]MpJobsch: ERROR: 0424: An error has been detected in Systemwalker ACL Manager (API). (code = XXXX, YYYY)

[UNIX]MpJobsch: WARNING: 0426: Failed to load the audit log library.

[UNIX]MpJobsch: WARNING: 0427: Failed to read the audit log file.

[UNIX]MpJobsch: ERROR: 0433: XXXX Failed to read job definition variable information.

[UNIX]MpJobsch: ERROR: 0434: XXXX Failed to write job definition variable information.

[UNIX]MpJobsch: ERROR: 0437: XXXX Failed to read parameter information.

[UNIX]MpJobsch: ERROR: 0439: XXXX Failed to write variable parameter information.

[UNIX]MpJobsch: ERROR: 0524: Failed to write to the message event occurrence history file.

[UNIX]MpJobsch: ERROR: 0525: XXXX Failed to read the jobnet variable information file.

[UNIX]MpJobsch: ERROR: 0526: XXXX Failed to write to the jobnet variable information file.

[UNIX]MpJobsch: ERROR: 0527: XXXX Failed to delete the jobnet variable information file.

[UNIX]MpJobsch: ERROR: 0532: The license key was not registered or the trial time limit passed. Please register the license key if you continue to use this product.

[UNIX]MpJobsch: INFO: 0533: This product operates as a trial period. The remainder trial period is XXXX days.

[Windows]MpJobsch: INFO: 1024: Systemwalker MpJobsch communicated with the POP3 server.

[Windows]MpJobsch: INFO: 1053: Systemwalker MpJobsch has ended.

[Windows]MpJobsch: INFO: 1198: Failure in communicating with the jobscheduler (client).

[Windows]MpJobsch: INFO: 1221: The size of log information has exceeded the maximum value.

[Windows]MpJobsch: INFO: 1300: Systemwalker MpJobsch is started.

[Windows]MpJobsch: INFO: 1301: Systemwalker MpJobsch ended normally.

[Windows]MpJobsch: INFO: 1307: Systemwalker MpJobsch has started to end process.

[Windows]MpJobsch: INFO: 1308: Systemwalker MpJobsch has started normally.

[Windows]MpJobsch: INFO: 1310: Systemwalker MpJobsch has reloaded EventLog.

[Windows]MpJobsch: INFO: 2168: There are incorrect host names (XXXX) in the monitor authorization host file.

[Windows]MpJobsch: INFO: 2287: XXXX YYYY did not start.

[Windows]MpJobsch: INFO: 2301: XXXX message event occurred.

[Windows]MpJobsch: INFO: 2381: func=XXXX:YYYY() CCCC:ZZZZ

[Windows]MpJobsch: INFO: 2386: func = XXXX: YYYY() Socket function return code (code = ZZZZ).

[Windows]MpJobsch: INFO: 2533:This product operates as a trial period. The remainder trial period is XXXX days.

[Windows]MpJobsch: WARNING: 3136: The host name in the monitor authorization host file is too long.

[Windows]MpJobsch: WARNING: 3168: There are incorrect host names in the monitor authorization host file.

[Windows]MpJobsch: WARNING: 3194: Failure in communicating with the POP3 server.

[Windows]MpJobsch: WARNING: 3300: Settings of the EventLog are incorrect.

[Windows]MpJobsch: WARNING: 3304: The number of job nets exceeded the maximum number

[Windows]MpJobsch: WARNING: 3305: The number of jobnets exceeded the warning level.

[Windows]MpJobsch: WARNING: 3306: Failed to set virtual time.

[Windows]MpJobsch: WARNING: 3307: The virtual time is set as a past time.

[Windows]MpJobsch: WARNING: 3308: Systemwalker MpJobsch failed in the security release.

[Windows]MpJobsch: WARNING: 3426: Failed to load the audit log library.

[Windows]MpJobsch: WARNING: 3427: Failed to read the audit log file.

[Windows]MpJobsch: WARNING: 4033: XXXX Systemwalker MpJobsch failed to set policy information.

[Windows]MpJobsch: WARNING: 4284: Failure in XXXX host information acquisition in the monitor authorization host file.

[Windows]MpJobsch: WARNING: 4286: XXXX The trace function cannot be used.

[Windows]MpJobsch: WARNING: 4305: XXXX YYYY did not start at scheduled time.

[Windows]MpJobsch: WARNING: 4306: XXXX YYYY did not finish before Estimated end time.

[Windows]MpJobsch: WARNING: 5224: XXXX YYYY is not yet finished. Schedule will be done after the job net ends.

[Windows]MpJobsch: WARNING: 5432: XXXX YYYY A variable parameter has been ignored.

[Windows]MpJobsch: ERROR: 6001: Systemwalker MpJobsch failed to activate the abnormal exit routine of the job net.

[Windows]MpJobsch: ERROR: 6005: Systemwalker MpJobsch failed to register user.

[Windows]MpJobsch: ERROR: 6006: Systemwalker MpJobsch failed to read job net information.

[Windows]MpJobsch: ERROR: 6007: Systemwalker MpJobsch failed to write job net information.

[Windows]MpJobsch: ERROR: 6008: Systemwalker MpJobsch failed to retrieve the current time.

[Windows]MpJobsch: ERROR: 6009: Systemwalker MpJobsch failed to create shared memory.

[Windows]MpJobsch: ERROR: 6014: Systemwalker MpJobsch service not started.

[Windows]MpJobsch: ERROR: 6016: DBPATH not found.

[Windows]MpJobsch: ERROR: 6017: Systemwalker MpJobsch failed to attach shared memory.

[Windows]MpJobsch: ERROR: 6019: Job net not found in job net information.

[Windows]MpJobsch: ERROR: 6023: The tskmmsrv argument is incorrect.

[Windows]MpJobsch: ERROR: 6025: Systemwalker MpJobsch failed to read message events information.

[Windows]MpJobsch: ERROR: 6026: Systemwalker MpJobsch failed in loading a library.

[Windows]MpJobsch: ERROR: 6027: Systemwalker MpJobsch failed to retrieve day change time.

[Windows]MpJobsch: ERROR: 6029: The number of projects has exceeded the maximum number (1000).

[Windows]MpJobsch: ERROR: 6030: Project information in shared memory does not exist.

[Windows]MpJobsch: ERROR: 6031: Job information does not exist.

[Windows]MpJobsch: ERROR: 6033: Systemwalker MpJobsch failed to set policy information.

[Windows]MpJobsch: ERROR: 6034: Failure in reading project information.

[Windows]MpJobsch: ERROR: 6037: Systemwalker MpJobsch failed to write job net output information.

[Windows]MpJobsch: ERROR: 6039: Failure in Systemwalker MpJobsch activation.

[Windows]MpJobsch: ERROR: 6040: Failed to read parameters for execution.

[Windows]MpJobsch: ERROR: 6046: Systemwalker MpJobsch failed to write log information.

[Windows]MpJobsch: ERROR: 6051: Systemwalker MpJobsch failed to open schedule pattern file.

[Windows]MpJobsch: ERROR: 6055: Systemwalker MpJobsch failed to delete a file for a duplicated start check.

[Windows]MpJobsch: ERROR: 6060: Systemwalker MpJobsch failed to read the schedule pattern file.

[Windows]MpJobsch: ERROR: 6063: Systemwalker MpJobsch already started.

[Windows]MpJobsch: ERROR: 6090: Calendar information not found.

[Windows]MpJobsch: ERROR: 6093: Systemwalker MpJobsch failed to update calendar information.

[Windows]MpJobsch: ERROR: 6097: Restart the Systemwalker MpJobsch.

[Windows]MpJobsch: ERROR: 6098: Log information is not found.

[Windows]MpJobsch: ERROR: 6100: Systemwalker MpJobsch failed to read/modify calendar information.

[Windows]MpJobsch: ERROR: 6103: The job net is not found.

[Windows]MpJobsch: ERROR: 6104: The job net name is incorrect.

[Windows]MpJobsch: ERROR: 6120: The host name in the monitor host file is too long.

[Windows]MpJobsch: ERROR: 6129: Systemwalker MpJobsch failed to read the monitor host file.

[Windows]MpJobsch: ERROR: 6130: Failure in host name retrieval.

[Windows]MpJobsch: ERROR: 6131: Failure in Host IP address retrieval.

[Windows]MpJobsch: ERROR: 6133: Failure in communicating with the monitored host.

[Windows]MpJobsch: ERROR: 6134: Failed in the control of the communication.

[Windows]MpJobsch: ERROR: 6137: The monitored host is not found.

[Windows]MpJobsch: ERROR: 6140: Monitored host information not found.

[Windows]MpJobsch: ERROR: 6145: Failure in communicating with the monitoring host.

[Windows]MpJobsch: ERROR: 6147: Failure in port number (tcp) acquisition for communication with the monitoring host.

[Windows]MpJobsch: ERROR: 6148: Job net information is not found.

[Windows]MpJobsch: ERROR: 6149: Failure to communicate among service processes.

[Windows]MpJobsch: ERROR: 6151: Systemwalker MpJobsch failed to read job net output information.

[Windows]MpJobsch: ERROR: 6160: Failure in IP address acquisition.

[Windows]MpJobsch: ERROR: 6161: Systemwalker MpJobsch failed to read information on the monitor authorization host file.

[Windows]MpJobsch: ERROR: 6163: Failure in Job Execution Control machine ID acquisition.

[Windows]MpJobsch: ERROR: 6164: Systemwalker MpJobsch failed to send job net information.

[Windows]MpJobsch: ERROR: 6166: The tskbasrv argument is incorrect.

[Windows]MpJobsch: ERROR: 6167: There are incorrect host names in the monitor host file.

[Windows]MpJobsch: ERROR: 6168: There are incorrect host names in the monitor authorization host file.

[Windows]MpJobsch: ERROR: 6174: Failure in Job Execution Control job activation.

[Windows]MpJobsch: ERROR: 6183: Systemwalker MpJobsch failed to generate a file for a duplicated start check.

[Windows]MpJobsch: ERROR: 6184: The monitor host file is not found.

[Windows]MpJobsch: ERROR: 6193: The tskmlsrv argument is incorrect.

[Windows]MpJobsch: ERROR: 6197: The tskwnsrv argument is incorrect.

[Windows]MpJobsch: ERROR: 6198: Failure in communicating with the jobscheduler(client).

[Windows]MpJobsch: ERROR: 6199: Failure in connecting with the jobscheduler(client).

[Windows]MpJobsch: ERROR: 6200: Host name is too long.

[Windows]MpJobsch: ERROR: 6201: Failure in port number (tcp) acquisition for communication with the PC.

[Windows]MpJobsch: ERROR: 6202: Restart Systemwalker MpJobsch.

[Windows]MpJobsch: ERROR: 6204: Erroneous record found in calendar information.

[Windows]MpJobsch: ERROR: 6206: Systemwalker MpJobsch failed in the re-schedule.

[Windows]MpJobsch: ERROR: 6208: Systemwalker MpJobsch failed to read log information.

[Windows]MpJobsch: ERROR: 6214: Systemwalker MpJobsch failed to read group information.

[Windows]MpJobsch: ERROR: 6219: Systemwalker MpJobsch failed to write group information.

[Windows]MpJobsch: ERROR: 6222: Systemwalker MpJobsch failed to activate the log information switch exit routine.

[Windows]MpJobsch: ERROR: 6223: Systemwalker MpJobsch failed to send group information.

[Windows]MpJobsch: ERROR: 6226: The group is being saved or controlled.

[Windows]MpJobsch: ERROR: 6249: The tskmdsrv argument is incorrect.

[Windows]MpJobsch: ERROR: 6255: The tskevsrv argument is incorrect.

[Windows]MpJobsch: ERROR: 6257: Systemwalker MpJobsch failed to day change time notice exit routine.

[Windows]MpJobsch: ERROR: 6267: Failure in port number (tcp) acquisition for communication with the jobscheduler communication service.

[Windows]MpJobsch: ERROR: 6273: Systemwalker MpJobsch is being started.

[Windows]MpJobsch: ERROR: 6276: The LANG value is incorrect.

[Windows]MpJobsch: ERROR: 6295: Systemwalker MpJobsch failed to activate the job exit routine.

[Windows]MpJobsch: ERROR: 6299: The database has not been converted.

[Windows]MpJobsch: ERROR: 6300: Failure in message queue generation.

[Windows]MpJobsch: ERROR: 6301: Failure in reading message.

[Windows]MpJobsch: ERROR: 6302: Write message failed at server (message queue).

[Windows]MpJobsch: ERROR: 6304: Failure in retrieving message queue handle.

[Windows]MpJobsch: ERROR: 6305: Write message failed at client (message queue).

[Windows]MpJobsch: ERROR: 6307: Not enough memory for new process.

[Windows]MpJobsch: ERROR: 6308: Cannot allocate enough message queue buffer.

[Windows]MpJobsch: ERROR: 6311: The tskelsrv argument is incorrect.

[Windows]MpJobsch: ERROR: 6312: The message event name is not found.

[Windows]MpJobsch: ERROR: 6313: The tskelsrv failed to activate the tskmmsrv.

[Windows]MpJobsch: ERROR: 6314: The message event table file cannot be opened.

[Windows]MpJobsch: ERROR: 6315: Read parameters for execution failed.

[Windows]MpJobsch: ERROR: 6320: The parameter for execution is incorrect.

[Windows]MpJobsch: ERROR: 6322: Work directory not found.

[Windows]MpJobsch: ERROR: 6325: Systemwalker MpJobsch failed to activate the normal exit routine of the job net.

[Windows]MpJobsch: ERROR: 6327: Systemwalker MpJobsch is being started.

[Windows]MpJobsch: ERROR: 6329: There is no drive letter used because of the user certification.

[Windows]MpJobsch: ERROR: 6342: Systemwalker MpJobsch failed to activate the start late exit routine of the job net.

[Windows]MpJobsch: ERROR: 6343: Systemwalker MpJobsch failed to activate the end late exit routine of the job net.

[Windows]MpJobsch: ERROR: 6344: Systemwalker MpJobsch failed in the security reinforcement.

[Windows]MpJobsch: ERROR: 6346: The filesystem of the database directory is not NTFS.

[Windows]MpJobsch: ERROR: 6366: The jobscheduler failed to read parameter information file.

[Windows]MpJobsch: ERROR: 6416: The project is not found.

[Windows]MpJobsch: ERROR: 6421: Failed to access the schedule file. Refer to the manual and resolve the problem.

[Windows]MpJobsch: ERROR: 6524: Failed to write to the message event occurrence history file.

[Windows]MpJobsch: ERROR: 6532: The license key was not registered or the trial time limit passed. Please register the license key if you continue to use this product.

[Windows]MpJobsch: ERROR: 7000: func=XXXX:YYYY() ZZZZ

[Windows]MpJobsch: ERROR: 7012: XXXX is trapped.

[Windows]MpJobsch: ERROR: 7022: Erroneous record exists in job net information of XXXX.

[Windows]MpJobsch: ERROR: 7043 XXXX Systemwalker MpJobsch failed to read job net information file.

[Windows]MpJobsch: ERROR: 7044: XXXX Systemwalker MpJobsch failed to write job net information file.

[Windows]MpJobsch: ERROR: 7179: Failure in XXXX backup.

[Windows]MpJobsch: ERROR: 7182: XXXX project name is too long.

[Windows]MpJobsch: ERROR: 7191: XXXX cannot be executed.

[Windows]MpJobsch: ERROR: 7212: Systemwalker MpJobsch failed to read group information file(XXXX).

[Windows]MpJobsch: ERROR: 7215: XXXX Erroneous record found in group information.

[Windows]MpJobsch: ERROR: 7218: XXXX Systemwalker MpJobsch failed to write group information file.

[Windows]MpJobsch: ERROR: 7258: XXXX user name is too long

[Windows]MpJobsch: ERROR: 7300: func=XXXX:YYYY() CCCC:ZZZZ

[Windows]MpJobsch: ERROR: 7301: func=XXXX:YYYY() ZZZZ

[Windows]MpJobsch: ERROR: 7306: XXXX has no value.

[Windows]MpJobsch: ERROR: 7307: The XXXX is not a keyword.

[Windows]MpJobsch: ERROR: 7308: The XXXX abnormally ended.

[Windows]MpJobsch: ERROR: 7309: XXXX directory in DBPATH is not found.

[Windows]MpJobsch: ERROR: 7374: XXXX Access denied.

[Windows]MpJobsch: ERROR: 7424: An error has been detected in Systemwalker ACL Manager (API). (code = XXXX, YYYY)

[Windows]MpJobsch: ERROR: 7433: XXXX Failed to read job definition variable information.

[Windows]MpJobsch: ERROR: 7434: XXXX Failed to write job definition variable information.

[Windows]MpJobsch: ERROR: 7435: XXXX YYYY ZZZZ The message event with specified variable parameters has been ignored.

[Windows]MpJobsch: ERROR: 7437: XXXX Failed to read parameter information.

[Windows]MpJobsch: ERROR: 7438: XXXX Failed to write parameter information

[Windows]MpJobsch: ERROR: 7439: XXXX Failed to write variable parameter information.

[Windows]MpJobsch: ERROR: 7525: XXXX Failed to read the jobnet variable information file.

[Windows]MpJobsch: ERROR: 7526: XXXX Failed to write to the jobnet variable information file.

[Windows]MpJobsch: ERROR: 7527: XXXX Failed to delete the jobnet variable information file.

[Windows]MpJobsch: ERROR: 8216: XXXX YYYY is deleted because it is an invalid group.

[Windows]MpJobsch: ERROR: 8300: The message event table file is incorrect, the message definition is ignored from line XXXX to line YYYY.

[Windows]MpJobsch: ERROR: 8301: func=XXXX:YYYY() Socket function error occurred (code = ZZZZ)

[Windows]MpJobsch: ERROR: 8302 : The iplstart job net (XXXX YYYY) is not started.

[Windows]MpJobsch: ERROR: 8431: XXXX YYYY Copy and startup of a job net failed.

[Windows]MpJobsch: INFO: 9000: The job net has started. JobNetComment=XXXX JobNetName=YYYY ProjectName=ZZZZ

[Windows]MpJobsch: INFO: 9001: The job net has normal ended. JobNetComment=XXXX JobNetName=YYYY Code=CCCC ProjectName=ZZZZ

[Windows]MpJobsch: ERROR: 9002: The job net has abnormal ended. JobNetComment=XXXX JobNetName=YYYY Code=CCCC ProjectName=ZZZZ

[Windows]MpJobsch: WARNING: 9003: The job net has refused. JobNetComment=XXXX JobNetName=YYYY ProjectName=ZZZZ

[Windows]MpJobsch: WARNING: 9004: The job net has skipped. JobNetComment=XXXX JobNetName=YYYY ProjectName=ZZZZ

[Windows]MpJobsch: INFO: 9005: The job net has pseudo-normal ended. Job net comment=XXXX Job net name=YYYY Code=CCCC Project name=ZZZZ

[Windows]MpJobsch: INFO: 10000: XXXX

[Windows]MpJobsch: WARNING: 10001: XXXX

[Windows]MpJobsch: WARNING: 10002: XXXX

[Windows]MpMjes: ERROR: 200: Failure in starting session manager service.

[Windows]MpMjes: INFO: 1000: Systemwalker MpMjes service started normally.

[Windows]MpMjes: INFO: 1001: Systemwalker MpMjes service was normally terminated.

[Windows]MpMjes: ERROR: 1005: Failure in starting the program for job' s history information/operation result functions.

[Windows]MpMjes: WARNING: 1006: Failure in opening job's operation result information file.

[Windows]MpMjes: ERROR: 1007: System error occurred while processing the history information function/operation result function program.

[Windows]MpMjes: ERROR: 1008: Faluire in writing job's operation result information file.

[Windows]MpMjes: WARNING: 1009: The TCP port for the Network Job Monitor does not exist.

[Windows]MpMjes: ERROR: 1010: The filesystem of the Spool directory is not NTFS.

[Windows]MpMjes: ERROR: 1011: The continuous execution modes of each server are not unified.

[Windows]MpMjes: ERROR: 1012: Failure in writing to the job exit code file.

[Windows]MpMjes: ERROR: 1031: The filesystem of the job execution history information directory is not NTFS.

[Windows]MpMjes: ERROR: 1032: The filesystem of the operation results data directory is not NTFS.

[Windows]MpMjes: ERROR: 1033: Systemwalker MpMjesN failed in the security reinforcement.

[Windows]MpMjes: WARNING: 1034: Systemwalker MpMjesN failed in the security release.

[Windows]MpMjes: ERROR: 1035: Systemwalker MpMjesN failed in the security reinforcement by load balancing definition.

[Windows]MpMjes: WARNING: 1632: Failed to load the audit log library.

[Windows]MpMjes: WARNING: 1633: Failed to read the audit log file.

[Windows]MpMjes: WARNING: 1634: Execution server <hostname> was excluded from host group <hostgroup>.

[Windows]MpMjes: ERROR: 1635: mjesexit.bat/mjesexit.exe was not able to be called.code=xxxx

[Windows]MpMjes: WARNING: 1636: Abnormalities were detected to mjesexit.bat/mjesexit.exe file.

[Windows]MpMjes: ERROR: 1637: failed in allocate of the memory.

[Windows]MpMjes: ERROR: 1638: Process Information File open error occurred. Failed in the injection of the job.

[Windows]MpMjes: ERROR: 1639: Process Information File read error occurred. Failed in the injection of the job.

[Windows]MpMjes: ERROR: 1640: Process Information File write error occurred. Failed in the injection of the job.

[Windows]MpMjes: ERROR: 1641: Process Information File close error occurred. Failed in the injection of the job.

[Windows]MpMjes: ERROR: 1642: Process Information File open error occurred. Job is carrying it out.

[Windows]MpMjes: ERROR: 1643: Process Information File read error occurred. Job is carrying it out.

[Windows]MpMjes: ERROR: 1644: Process Information File write error occurred. Job is carrying it out.

[Windows]MpMjes: ERROR: 1645: Process Information File close error occurred. Job is carrying it out.

[Windows] MpMjes: WARNING: 1646: Failed to write to the job execution history information file because the named pipe does not exist. The entry that failed to be output is: %1

[Windows]MpMjes: WARNING: 1647: Failed to write to the job execution history information file because could not open the named pipe. The entry that failed to be output is: %1

[Windows]MpMjes: WARNING: 1648: Failed to write to the job execution history information file because could not write to the named pipe. The entry that failed to be output is: %1

[Windows]MpMjes: WARNING: 1649: Failed to open the job execution history information file. The entry that failed to be output is: %1

[Windows]MpMjes: ERROR: 1650: Failed to write to the job execution history information file. The entry that failed to be output is: %1

[Windows]MpMjes: ERROR: 2400: The license key was not registered or the trial time limit passed. Please register the license key if you continue to use this product.

[Windows]MpMjes: INFO: 2401: This product operates as a trial period. The remainder trial period is XXXX days.

[Windows]MpMjes: ERROR: 6030: Could not get spool directory path from registry in initialization process.

[Windows]MpMjes: ERROR: 6031: Could not get queue path from registry in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6032: Could not get initialization file path from registry in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6033: Cannot open initialization file. Error code=code

[Windows]MpMjes: ERROR: 6034: Characters which cannot be used in initialization file are present.

[Windows]MpMjes: ERROR: 6035: Initialization file EOF detected while reading continuation rows of initialization parameters.

[Windows]MpMjes: ERROR: 6036: Length of 1 row of initialization parameter is exceeding. Row number=<row>

[Windows]MpMjes: ERROR: 6037: Error in initialization parameter syntax. Row number=<row>

[Windows]MpMjes: ERROR: 6038: Parameter that cannot be specified in initialization file is mentioned. Row number=<row>

[Windows]MpMjes: ERROR: 6039: Incorrect specified value of operand in initialization parameter. Row number=<row>

[Windows]MpMjes: ERROR: 6040: Error in definition sequence of initialization parameter. Row number=<row>

[Windows]MpMjes: ERROR: 6041: Queue specified in dfltqueue operand of system parameter is not defined in queue parameter. Row number=<row>

[Windows]MpMjes: ERROR: 6042: dfltprty operand is not defined in either queue parameter or system parameter. Row number=<row>

[Windows]MpMjes: ERROR: 6043: Initialization parameters after definition are described. Row number=<row>

[Windows]MpMjes: ERROR: 6044: Queue definition exceeded limit value. Row number=<row>

[Windows]MpMjes: ERROR: 6045: Incorrect start mode for starting job execution control.

[Windows]MpMjes: ERROR: 6046: Failure in reading system information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6047: Error in opening system information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6048: Error in writing to system information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6049: Error in creating queue directory in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6050: Error in opening queue information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6051: Error in writing to queue information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6052: Operand that cannot be specified in initialization parameter is described. Row number=<row>

[Windows]MpMjes: ERROR: 6053: No valid parameter in initialization file.

[Windows]MpMjes: ERROR: 6054: Failure in deleting spool directory in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6055: Failure in deleting spool file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6056: Failure in creating spool directory in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6057: Error in read open process of queue information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6058: Error to read from queue information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6059: Error in updation of queue information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6060: Error in read open process of job information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6061: Error in reading from job information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6062: Error in write opening of job information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6063: Error in writing to job information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6064: Error in queue search process in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6065: Error in job initialization process. Error code=code

[Windows]MpMjes: ERROR: 6067: Error in reading from system information file in initialization process. Error code=code

[Windows]MpMjes: ERROR: 6068: Failure in allocating heap for ACE in security process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6069: Failure in allocating heap for DOMAIN in security process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6070: Failure in allocating heap for SNU in security process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6071: Failure in getting xxx account information in initialization security process. Error code=code

[Windows]MpMjes: ERROR: 6072: Abnormality regarding SID of xxx account in initialization security process. Error code=code

[Windows]MpMjes: ERROR: 6073: Failure in allocating heap for Account in security process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6074: Failure in allocating heap for Object in security process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6075: Failure in initializing heap for Object in security process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6076: Failure in allocating heap for ACL in security process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6077: Failure in initializing heap for ACL in security process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6078: Error in setting ACE in initialization security process. Error code=code

[Windows]MpMjes: ERROR: 6079: ACL abnormality initialization security process. Error code=code

[Windows]MpMjes: ERROR: 6080: Failure in setting security information to object in initialization security process. Error code=code

[Windows]MpMjes: ERROR: 6081: System information file is absent during spool conversion process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6082: System information file with incorrect file attribute during spool conversion process in initialization process.

[Windows]MpMjes: ERROR: 6083: Failure in opening system information file during spool conversion process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6084: Failure in getting correct size of system information file during spool conversion process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6085: Failure in reading system information file in spool conversion process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6086: Incorrect read size of system information file in spool conversion process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6087: Failure in positioning write start position of system information file in spool conversion process of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6088: Incorrect position for writing system information file in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6089: Failure in writing new system information file in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6090: System information file that cannot be handled by current V/L job execution control in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6091: Structure file with incorrect file attribute found in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6092: Failure in opening structure file in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6093: Failure in getting size of structure file in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6094: Failure in reading structure file in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6095: Incorrect read size of structure file in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6096: Failure in opening new structure file in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6097: Failure in writing new structure file in spool conversion of initialization process. Error code=code

[Windows]MpMjes: ERROR: 6098: Structure file that cannot be handled with current V/L job execution control was found in spool conversion of initialization process.

[Windows]MpMjes: ERROR: 6099: Incorrect structure file found in spool conversion of initialization process.

[Windows]MpMjes: ERROR: 6102: The number of host group definitions crossed over the limit value.

[Windows]MpMjes: ERROR: 6106: Could not found the directory specified by the path operand of the log parameter.Row number=<row>

[Windows]MpMjes: ERROR: 6107: Could not found the directory specified by the path operand of the record parameter.Row number=<row> number=<row>

[Windows]MpMjes: ERROR: 6108: Could not found the host group specified by the host operand of the queue parameter. Row number=<row>

[Windows]MpMjes: WARNING: 6109: The host group has more than one host with the same name. The hosts specified redundantly have been ignored.

[Windows]MpMjes: WARNING: 6110: XXXX Systemwalker MpMjes failed to set policy information.

[Windows]MpMjes: ERROR: 6111: Failed to allocate memory during initialization.

[Windows]MpMjes: WARNING: 9006: It doesn't end even if job name (jobname) lapses by end plan time (time) minutes.(Project Name=projectname,Job Net=jobnetname)

[UNIX]MpMjes:ERROR: 10003: Could not found path to spool directory for initialization. Row number=<row>

[UNIX]MpMjes: ERROR: 10007: Cannot open initialization file.<code>

[UNIX]MpMjes: ERROR: 10009: EOF of initialization file detected while reading continuation <row> of initialization parameter.

[UNIX]MpMjes: ERROR: 10010: Length of a row of initialization parameter too long. Row number=<row>

[UNIX]MpMjes: ERROR: 10011: Fault in initialization parameter method. Row number=<row>

[UNIX]MpMjes: ERROR: 10012: Initialization file contains parameters which cannot be specified. Row number=<row>

[UNIX]MpMjes: ERROR: 10013: Incorrect value specified for initialization parameter operand. Row number=<row>

[UNIX]MpMjes: ERROR: 10014: Fault in definition order of initialization parameter. Row number=<row>

[UNIX]MpMjes: ERROR: 10015: The queue specified in the dfltqueue operand of system parameter, is not defined by queue parameter. Row number=<row>

[UNIX]MpMjes: ERROR: 10016: dfltprty operand not defined either in system parameter or queue parameter. Row number=<row>

[UNIX]MpMjes: ERROR: 10017: Specifies the initialization parameter already defined. Row number=<row>

[UNIX]MpMjes: ERROR: 10018: The number of definitions of queue exceeded the limit.

[UNIX]MpMjes: ERROR: 10020: Failure reading system information file during initialization.<code>

[UNIX]MpMjes: ERROR: 10021: Error in write open of system information file during initialization.<code>

[UNIX]MpMjes: ERROR: 10022: Error in writing to system information file while initializing.<code>

[UNIX]MpMjes: ERROR: 10023: Error creating queue directory during initialization.<code>

[UNIX]MpMjes: ERROR: 10024: Error in write open process of queue information file during initialization.<code>

[UNIX]MpMjes: ERROR: 10025: Error writing in the queue information file during initialization.<code>

[UNIX]MpMjes: ERROR: 10026: Initialization file has operand which cannot be specified. Row number=<row>

[UNIX]MpMjes: ERROR: 10027: Initialization file does not have valid parameters.

[UNIX]MpMjes: ERROR: 10028: Failure deleting spool directory during initialization.<code>

[UNIX]MpMjes: ERROR: 10029: Failure deleting files in the spool directory during initialization.<code>

[UNIX]MpMjes: ERROR: 10030: Failure creating spool directory during initialization.<code>

[UNIX]MpMjes: ERROR: 10032: Error in read open process of queue information file during initialization.<code>

[UNIX]MpMjes: ERROR: 10033: Error reading from queue information file during initialization.<code>

[UNIX]MpMjes: ERROR: 10034: Error updating queue information file during initialization.<code>

[UNIX]MpMjes: ERROR: 10040: Error finding the queue during initialization.<code>

[UNIX]MpMjes: ERROR: 10041: Error occurred in job initialization.<code>

[UNIX]MpMjes: ERROR: 10056: Could not found the directory specified by the path operand of the log parameter. Row number=<row>

[UNIX]MpMjes: ERROR: 10058: Could not found the directory specified by the path operand of the record parameter. Row number=<row>

[UNIX]MpMjes: ERROR: 10059: The number of host group definitions crossed over the limit value.

[UNIX]MpMjes: ERROR: 10060: Could not found the host group specified by the host operand of the queue parameter.

[UNIX]MpMjes: ERROR: 10061: mjsdaemon : Invalid option flag specified.

[UNIX]MpMjes: ERROR: 10062: mjsdaemon : Invalid sub-system number specified.

[UNIX]MpMjes: ERROR: 10063: mjsdaemon : The environment of the sub-system number does not exist.

[UNIX]MpMjes: ERROR: 10064: mjsdaemon: Insufficient privilege.

[UNIX]MpMjes: ERROR: 10065: mjsdaemon : Unable to chdir() to spoolname.

[UNIX]MpMjes: ERROR: 10066: mjsdaemon was not started. because swadmin group does not exist.

[UNIX]MpMjes: ERROR: 10067: mjsdaemon : Already starting.

[UNIX]MpMjes: ERROR: 10068: Failed to initialize the jclinfo directory.

[UNIX]MpMjes: ERROR: 10069: mjsdaemon could not started. because to allocate job control table failed.

[UNIX]MpMjes: ERROR: 10070: mjsini process fork failed. jobnet= <jobnet> jobname = <jobname> jobno= <jobno>

[UNIX]MpMjes: WARNING: 10071: The job execution history/status information program failed to start.

[UNIX]MpMjes: WARNING: 10072: Unable to open to the job execution status information file.

[UNIX]MpMjes: ERROR: 10073: The system error occurred during the processing of the job execution history/status information program.

[UNIX]MpMjes: ERROR: 10074: Error in writing to the job execution status information file.

[UNIX]MpMjes: WARNING: 10075: Unable to make the directory for sub-system of history/status information file.

[UNIX]MpMjes: ERROR: 10076: Error in sending job message to Job Scheduler (jscmid:jscmid, mtype:mtype, mtext:mtext).

[UNIX]MpMjes: ERROR: 10077: jobinfo read error. delete path(path)

[UNIX]MpMjes: ERROR: 10078: jobinfo read error. delete jobdir=jobdir

[UNIX]MpMjes: ERROR: 10079: PreInitJob() : jcl struct convert error. delete jobdir=jobdir. code=code.

[UNIX]MpMjes: ERROR: 10080: PreInitJob() :Return value can not be set to jobinfo file. jobno=jobno, queue=queue

[UNIX]MpMjes: ERROR: 10081: jobinfo write error. jobno=jobno, queue=queue

[UNIX]MpMjes: ERROR: 10082: jmnetsv : Security mode is set to OFF. Because swadmin group does not exist.

[UNIX]MpMjes: ERROR: 10083: mjsnetsv : Failed in deciding Network Control Table size.

[UNIX]MpMjes: ERROR: 10084: jmnetsv : Failed in allocating Network Control Table.

[UNIX]MpMjes: ERROR: 10085: mjsnetsv : Failed in allocating Network Control Table.

[UNIX]MpMjes: ERROR: 10086: mjsnetsv : nodemap process failed.

[UNIX]MpMjes: ERROR: 10087: mjsnetsv : CLUSTER HOST information file format is invalid.

[UNIX]MpMjes: ERROR: 10088: Failed in the end notification of job (jobno=<jobno>, org_host=<host>, org_jobno=<org_jobno>, org_sub_system=<subsys>)

[UNIX]MpMjes: ERROR: 10089: mjsrjob : job information file write error. error code = xxx. jobname = xxx, job number = xxx, job end code = xxx.

[UNIX]MpMjes: ERROR: 10090: mjsrjob : job information file read error. error code = CCCC. jobname = XXXX, job number = YYYY, job end code = ZZZZ.

[UNIX]MpMjes: WARNING: 10091: The continuous execution modes of each server are not unified.

[UNIX]MpMjes: ERROR: 10092: F3CUB_LOG_PIPE open error occurred. error code=xxxx

[UNIX]MpMjes: ERROR: 10093: F3CUB_LOG_PIPE write error occurred. error code=xxxx

[UNIX]MpMjes: ERROR: 10094: Console process fork failed. error code=xxxx

[UNIX]MpMjes: ERROR: 10095: Console process execute failed. error code=xxxx

[UNIX]MpMjes: ERROR: 10096: mjsini process execute failed. error code=xxxx

[UNIX]MpMjes: ERROR: 10097: mjsisini process execute failed. error code=xxxx

[UNIX]MpMjes: ERROR: 10098: job status is not notify.

[UNIX]MpMjes: ERROR: 10099: Error in reading the host group file during initialization.

[UNIX]MpMjes: ERROR: 10100: Failure in starting mjsnetsv daemon.

[UNIX]MpMjes: INFO : 10101: The Systemwalker MpMjes has been stopped.

[UNIX]MpMjes: INFO : 10102: The Systemwalker MpMjes has been started. startmode=x, lang=y, jmmode=z.

[UNIX]MpMjes: ERROR: 10110: mjsnetsv : Failed in the bind of port number <number>.

[UNIX]MpMjes: ERROR: 10111: jmnetsv : Failed in the bind of port number <number>.

[UNIX]MpMjes: ERROR: 10112: Failure in starting session manager daemon.

[UNIX]MpMjes: WARNING: 10113: mjsnetsv : TCP port number does not exist.

[UNIX]MpMjes: WARNING: 10114: It doesn't end even if job name (jobname) lapses by end plan time (time) seconds. (Project Name=projectname, Job Net=jobnetname)

[UNIX]MpMjes: ERROR: 10115: job process fork failed. jobnet= jobnet jobname= jobname jobno= jobno

[UNIX]MpMjes: WARNING: 10120: Execution server <hostname> was excluded from host group <hostgroup>.

[UNIX]MpMjes: WARNING: 10123: Abnormalities were detected to mjes.job.exit file.

[UNIX]MpMjes: ERROR: 10124: mjes.job.exit was not able to be called. code = xxxx

[UNIX]MpMjes: WARNING: 10127: The host group has more than one host with the same name. The hosts specified redundantly have been ignored.

[UNIX]MpMjes: ERROR: 10128: Failed to create the exclusive processing control file for distributed execution. error code=xxxx

[UNIX]MpMjes: ERROR: 10129: mjsdaemon has stopped, because the system error occurred.

[UNIX]MpMjes: WARNING: 10132: XXXX The daemon failed to set policy information.

[UNIX]MpMjes: WARNING: 10135: The line %1 of the user control list for job execution is too long.

[UNIX]MpMjes: WARNING: 10136: The user control list for job execution contains more than 256 users.

[UNIX]MpMjes: ERROR: 10137: Failed to open the user control list for job execution. error code=xxxx

[UNIX]MpMjes: WARNING: 10138: Failed to load the audit log library.

[UNIX]MpMjes: WARNING: 10139: Failed to read the audit log file.

[UNIX]MpMjes: ERROR: 10140: Failed to allocate memory.

[UNIX]MpMjes: ERROR: 10141: failed in allocate of the memory.

[UNIX]MpMjes: ERROR: 10142: Process Information File open error occurred. Failed in the injection of the job.

[UNIX]MpMjes: ERROR: 10143: Process Information File read error occurred. Failed in the injection of the job.

[UNIX]MpMjes: ERROR: 10144: Process Information File write error occurred. Failed in the injection of the job.

[UNIX]MpMjes: ERROR: 10145: Process Information File close error occurred. Failed in the injection of the job.

[UNIX]MpMjes: ERROR: 10146: Process Information File open error occurred. Job is carrying it out.

[UNIX]MpMjes: ERROR: 10147: Process Information File read error occurred. Job is carrying it out.

[UNIX]MpMjes: ERROR: 10148: Process Information File write error occurred. Job is carrying it out.

[UNIX]MpMjes: ERROR: 10149: Process Information File close error occurred. Job is carrying it out.

[UNIX]MpMjes: ERROR: 10150: The license key was not registered or the trial time limit passed. Please register the license key if you continue to use this product.

[UNIX]MpMjes: INFO: 10151: This product operates as a trial period. The remainder trial period is XXXX days.

[Windows]mpnjsosv: INFO: 8449: Initialization of schedule engine has started.

[Windows]mpnjsosv: INFO: 8450: The schedule process of Task Link Engine started.

[Windows]mpnjsosv: INFO: 8451: Schedule engine has started stop processing.

[Windows]mpnjsosv: INFO: 8452: Schedule engine has stopped schedule processing.

[Windows]mpnjsosv: ERROR: 8706: The initial process of Task Link Engine is abnormal,the schedule process can not start.

[Windows]mpnjsosv: WARNING: 8736: Failed to load the audit log library.

[Windows]mpnjsosv: WARNING: 8737: Failed to read the audit log file.

[Windows]mpnjsosv: ERROR: 10264: Failed to bind the socket for connection service establishment during the initialization of communication controller.[Error: YYY]

[Windows]mpnjsosv: ERROR: 10266: Failed to bind the socket for Objects connection during the initialization of communication controller.[Error: YYY]

[Windows]mpnjsosv:ERROR: 10340:Failed to receive the requested data in the thread of connection service.[Error: YYY]

[Windows]mpnjsosv: ERROR: 10371: mpnjsosv: ERROR: 10371: Failed to receive the request data in the Task Link Service Thread.[Error: YYY]

MpPmonO: INFO: 10000: Started Process Monitor for Systemwalker Operation Manager.

MpPmonO: INFO: 10001: Stopped Process Monitor for Systemwalker Operation Manager.

MpPmonO: ERROR: 10002: Check if the Systemwalker Operation Manager process (XXXX) is running properly.

MpPmonO: ERROR: 10003: Could not start Process Monitor for Systemwalker Operation Manager.[YYYY]

MpPmonO: WARNING: 10005: Process Monitor for Systemwalker Operation Manager failed to obtain the monitored processes.[YYYY] [ZZZZ]

[Windows]MpPmonO: WARNING: 10006: Process Monitor for Systemwalker Operation Manager failed to wait until starting to monitor. Started to Monitor.

[Windows]MpPmonO: WARNING: 10007: Process Monitor for Systemwalker Operation Manager failed to wait interval time. Repeat to monitor.

MpPmonO: WARNING: 10008: Process Monitor for Systemwalker Operation Manager may have failed to obtain the monitored processes.[YYYY] [ZZZZ]

MpPmonO: WARNING: 10009: Process Monitor for Systemwalker Operation Manager failed to process partial termination. Partial termination may not be monitored properly.[YYYY]

MpPmonO: WARNING: 10010: Process Monitor for Systemwalker Operation Manager detected an error, but did not send notification.

[Windows]MpPmonO: WARNING: 10011: Process Monitor for Systemwalker Operation Manager failed to stop service.[YYYY]

[Windows]MpPmonO: WARNING: 10012: Process Monitor for Systemwalker Operation Manager skipped monitoring, because of resource lack.

[Windows]MpPmonO: WARNING: 10013: Process Monitor for Systemwalker Operation Manager failed to get process information.So, skipped monitoring.

MpPmonO: WARNING: 10015: Process Monitor for Systemwalker Operation Manager failed to notify Operation Management Client.

MpPmonO: WARNING: 10016: Process Monitor for Systemwalker Operation Manager failed to notify upstream server of error properly.

MpPmonO: WARNING: 10017: Process Monitor for Systemwalker Operation Manager failed to execute the customized command.

MpPmonO: WARNING: 10018: Process Monitor for Systemwalker Operation Manager failed to obtain information on error notification.[YYYY]

MpPmonO: WARNING: 10019: Definition on the notified server for Process Monitor for Systemwalker Operation Manager is invalid.[YYYY]

MpPmonO: WARNING: 10020: Process Monitor for Systemwalker Operation Manager failed to notify upstream server of error properly. Notified server may not be defined.[YYYY]

MpPmonO: WARNING: 10021: Invalid host IP address is specified for Process Monitor for Systemwalker Operation Manager.[YYYY]

MpPmonO: WARNING: 10022: Process Monitor for Systemwalker Operation Manager failed to notify upstream server of error properly. Could not obtain the IP address.[YYYY]

mpsetlogsend: INFO: 0001: Applied the send settings of the <NAME>.

mpsetlogsend: ERROR: 1001: Failed to apply the audit log settings.

mpsetlogsend: ERROR: 1002: An internal error occurred (Detail code: CODE)

mpsetlogsend: ERROR: 1003: Unsupported command.

mpsetlogsend: ERROR: 1004: Invalid option.

mpsetlogsend: ERROR: 1005: Unable to create the log directory.

mpsetlogsend: ERROR: 1006: Unauthorized to execute the command.

MpStem: INFO: 10001: Creating schedule information. (yyyymmdd)

MpStem: INFO: 10002: Created the schedule information. (yyyymmdd)

MpStem: INFO: 10003: Schedule information already exists. Could not create it. (yyyymmdd)

MpStem: INFO: 10006: Operation Change has been completed successfully.

MpStem: INFO: 10010: A job net on the previous day is not completed.

MpStem: INFO: 10015: The number of projects reached the maximum. Created a backup of obsolete schedules.

MpStem: ERROR: 10100: Schedule information already exists. Cannot create it. (yyyymmdd)

MpStem: ERROR: 10101: Schedule information is currently being created. Cannot create it. (yyyymmdd)

MpStem: ERROR: 10102: Schedule information is currently being created by another process. Cannot create it. (yyyymmdd)

MpStem: ERROR: 10103: Failed to create schedule information. (yyyymmdd)

MpStem: ERROR: 10104: Failed to extract the schedule information.

MpStem: ERROR: 10105: Failed to write the schedule management file.

MpStem: ERROR: 10106: Failed to distribute the schedule information. (XXXX)

MpStem: ERROR: 10107: Failed to register the schedule information. (XXXX)

MpStem: ERROR: 10108: Schedule server does not exist. (XXXX)

MpStem: ERROR: 10109: Invalid data. Failed to register the project information. (XXXX)

MpStem: ERROR: 10110: Invalid data. Failed to register the schedule information. (XXXX)

MpStem: ERROR: 10112: Failed to communicate with Schedule Server. (XXXX)

MpStem: ERROR: 10113: Same host name is defined more than once in the definition on Schedule Server. (XXXX)

MpStem: ERROR: 10114: Same IP address is defined more than once in the definition on Schedule Server. (XXXX)

MpStem: ERROR: 10119: Environment is not configured correctly. (XXXX)

MpStem: ERROR: 10123: Cannot create schedule information for the past date. (yyyymmdd)

MpStem: ERROR: 10124: Deletion of the schedule information failed previously. Cannot create it. (yyyymmdd)

MpStem: ERROR: 10130: Failed to apply the schedule information. (mmdd)

MpStem: ERROR: 10131: Subsystem environment is not created.

MpStem: ERROR: 10132: Invalid value is specified in the schedule configuration file.

MpStem: ERROR: 10133: Can only schedule 30 days into the future. (yyyymmdd)

MpStem: ERROR: 10134: Cannot schedule for a date in the previous year. (yyyymmdd)

MpStem: ERROR: 10136: Operation Change has failed.

MpStem: ERROR: 10137: Failed to check the schedule for Operation Change.

MpStem: ERROR: 10138: Cannot run the schedule because the Operation Change process has failed previously.

MpStem: ERROR: 10139: No operation is scheduled by dates. Cannot schedule using Schedule Server.

MpStem: ERROR: 10143: Virtual time is not in sync between servers. (XXXX)

MpStem: ERROR: 10144: Cannot read the master setting of the project. (XXXX)

MpStem: ERROR: 10145: Could not check if the schedule information is registered. (XXXX)

MpStem: ERROR: 10146: Failed to notify the management server.

MpStem: ERROR: 10147: An error occurred while applying the schedule.

MpStem: ERROR: 10148: A schedule server has been added. Cannot start the schedule for error status.

MpStem: ERROR: 10149: The string exceeded the maximum size (bytes) after encoding. (XXXX)

MpStem: ERROR: 10150: Cannot distribute schedules to an earlier version of the schedule server. (XXXX)

MpStem: ERROR: 10151: One or more functions in the definitions are not supported. (XXXX)

MpStem: ERROR: 10152: Cannot schedule for a date in the previous year. (XXXX)

MpStem: WARNING: 10201: There is no information to create a schedule.

MpStem: WARNING: 10202: Invalid value is specified in the schedule configuration file.

MpStem: WARNING: 10203: Registering the schedule information... (XXXX)

MpStem: WARNING: 10204: Failed to delete the registered information.

MpStem: WARNING: 10209: There is a project that is not set as master. (XXXX)

MpStem: WARNING: 10210: Failed to load the audit log library.

MpStem: WARNING: 10211: Failed to read the audit log file.

MpStem: WARNING: 10212: XXXX Failed to set up policy information.

MpStem: WARNING: 10213: Failed to set up policy information.

MpStem: WARNING: 10214: Cannot create schedule information for tha past date. (XXXX)

MpStem: ERROR: 10328: Systemwalker MpJobsch stopped and cannot be controlled.

FSP_FJSVCIR_CIRINST: ERROR: 101: CIRINST101: Administrator privilege is required.

FSP_FJSVCIR_CIRINST: ERROR: 102: CIRINST102: Failed to create %s

FSP_FJSVCIR_CIRINST: ERROR: 103: CIRINST103: It is required at least %dMB

[Windows]FSP_FJSVCIR_CIRINST: ERROR: 104: CIRINST104: Failed to copy CIR files.[Linux][Solaris]FSP_FJSVCIR_CIRINST: ERROR: 104: CIRINST104: Failed to copy CIR installer files.

FSP_FJSVCIR_CIRINST: ERROR: 105: CIRINST105: Failed to copy JRE.

FSP_FJSVCIR_CIRINST: ERROR: 106: CIRINST106: Failed to copy CIR

FSP_FJSVCIR_CIRINST: ERROR: 108: CIRINST108: JRE which should be deployed is not bundled.

FSP_FJSVCIR_CIRINST: ERROR: 109: CIRINST109: Unsupported OS.

[Linux]FSP_FJSVCIR_CIRINST: ERROR: 185: CIRINST185: lsb_release was not found. Please install the package below. - redhat-lsb

FSP_FJSVCIR_CIRINST: ERROR: 201: CIRINST201: Administrator privilege is required.

FSP_FJSVCIR_CIRINST: ERROR: 203: CIRINST203: Failed to delete files.

It failed to install.See log for details

Internal data is broken.

It has already been running in another process.

Please enter a valid option.

Failed to uninstall of the following software packages:

Unable to uninstall the software as it is referred from more than one software.

Unable to uninstall the software as the software is mandatory.

Internal data is broken.

Unable to uninstall the software you were about to uninstall as the existence of the software is a precondition for the operation of another software.

The program terminated abnormally.

An unexpected error has occurred during uninstall.

It failed to uninstall.See log for details.

Failed to initialize the temp directory.

[Notice]Need to restart for uninstall completion.

[Windows]scentricmgr or pcentricmgr or soperationmgr or poperationmgr has already started.

[Windows]Incorrect parameter.

[Windows]This program must run on the administrator privileges.

[UNIX]Command %1 rejected. already running : %2

[UNIX]The daemon is suppressed from starting. Cannot execute the command.

[UNIX]Usage: %1 %2

[UNIX]%1: ERROR: A product older than Systemwalker CentricMGR 10.1 has already been installed. Cannot specify -a parameter.

[UNIX]poperationmgr start...poperationmgr end.soperationmgr start...soperationmgr normal end.component start : %1component stopped normally:%1component started normally:%1component has been stopped:%1component has been started:%1

Could not delete XXX Access rights.

Could not set XXX Access rights.

Could not get group name list.

[Windows]Could not get domain name list.

No access control information is found for the project.

Could not get user name list

Failed to initialize the socket.(YYY:ZZZ)

Timed-out. (YYY:ZZZ)

Failed to receive data. (YYY:ZZZ)

Failed to forward the data. (YYY:ZZZ)

Failed to get port number. (YYY:ZZZ)

Failed to login to host. (YYY:ZZZ)

Failed to connect with the host. (YYY:ZZZ)

Failed to get memory. (YYY:ZZZ)

Virtually failed. (YYY:ZZZ)

[Windows]Not validated. (YYY:ZZZ)

[Windows]mpsetacl -a -t target -u user|-g group|-w wellknown [-s domain] -p r|w|x|cmpsetacl -d -t target [-u user|-g group|-w wellknown [-s domain]]

[UNIX]mpsetacl -a -t target -u user|-g group [-s domain] -p r|w|x|cmpsetacl -d -t target [-u user|-g group [-s domain]]

[Windows]You don't have enough privilege to execute this command.

[Windows]You do not belong to Administrators group.

[Windows]Internal error.

[UNIX]You are not a super-user.

[UNIX]Failed to convert into SJIS code.

Could not create '%1'

Control file was broken.

Could not read control file.

[UNIX]User '%1' not found.

[Windows]Account '%1' not found.

Group '%1' not found.

Could not set access rights to '%1'.

Target '%1' not found.

Could not remove owner of '%1'.

Could not remove access rights of '%1'.

Could not remove '%1'.

[Windows]mpchown -t target [-d domain] -o owner [-g|-u|-w]

[UNIX]mpchown -t target [-d domain] -o owner [-g|-u]

'%1' does not exist.

Could not change owner.

mkbat [-d|-j] [-b] -f filename [-r parent] [-x] [-c]

Could not create '%1'

[Windows]Failed to get name of Administrator

[UNIX]Failed to get name of root user

Failed to get user information.

Failed to open file(%1)

Failed to read file(.%1)

Failed to allocate memory

Failed to get owner information

[Windows]usage: mpaclcls [-u [-s { 0 - 9 }] ] | [-s { 0 - 9 } [-w]] shared-directory

[UNIX]usage: mpaclcls [-u] [-s { 0 - 9 }]

Cannot access to the shared directory.

usage: mpcssave [-s { 0 - 9 }]

Failed to transfer the security information.(%1:%2)

usage: mplstacluser [-s subsystem-no]

Internal error. code: %1, %2

Invalid argument.

Insufficient Memory.

[UNIX]usage: mpsetusermode -s { on | off }

[UNIX]Failed to create process list file.

[UNIX]Failed to check process.

[UNIX]Systemwalker Operation Manager is running.

[UNIX]Failed to set user mode.

[UNIX]Failed to set access rights.

[UNIX]usage: mpadduser -o OS-username [-d description] [-a] username

[UNIX]The user name must be specified within 20 bytes.

[UNIX]It's not allowed to add 'root' user.

[UNIX]Specified user name includes unusable characters.

[UNIX]Failed to add user.

[UNIX]Failed to check the uid of '%1'

[UNIX]It's not allowed to specify a super-user for an unprivileged user.

[UNIX]Specify a super-user for a privileged user.

[UNIX]'%1' is already in use.

[UNIX]usage: mpdeluser username [username ...] | -all

[UNIX]Internal error occurred.(Failed to create a file of process list.)

[UNIX]Internal error occurred.(Failed to check a process.)

[UNIX]It's not allowed to delete 'root' user.

[UNIX]usage: mpmoduser -o OS-username | -d description username

[UNIX]Failed to modify user.

[UNIX]Failed to check the privilege of '%1'.

[UNIX]usage: mpsetpasswd [-d] username

[UNIX]The password you specified is not long enough.The password must contain at least 5 bytes of characters.

[UNIX]The password must be specified within 50 bytes.

[UNIX]Specified password includes unusable characters.

[UNIX]Failed to delete password.

[UNIX]Failed to make crypto password.

[UNIX]Failed to set password.

[UNIX]usage: mpusers [-a]

[UNIX]Failed to list user.

[UNIX]Failed to convert into UTF-8 code.

[UNIX]Failed to convert into EUC code.

[UNIX]usage: mpsetupolmode -u { clear | keep }

[UNIX]Failed to set user policy distribution mode.

[UNIX]usage: mpprjcmdacl [-s { 0 - 9 }] projectname

[UNIX]'%1' does not exist.

[UNIX]usage: mpmkpwbat [-c] [-u username] -f filename

[Windows]ACL Manager: WARNING: 20: Failed to load the audit log library.

[UNIX]MpFwsec: WARNING: 00020: Failed to load the audit log library.

[Windows]ACL Manager: WARNING: 21: Failed to read the audit log file.

[UNIX]MpFwsec: WARNING: 00021: Failed to read the audit log file.

MpJmCal: ERROR: 0050 :The directory does not exist on the shared disk. (detail=0xXX)

MpJmCal: ERROR: 0051 :Invalid parameter. (detail=0xXX)

MpJmCal: ERROR: 0052 :Failed to create or update the setup file for calendar environment. (detail=0xXX)

[Windows]MpJmCal: ERROR: 0053 :Failed to connect to the Calendar service. (detail=0xXX)

[UNIX]MpJmCal: ERROR: 0054 :Failed to connect to the Calendar daemon. (detail=0xXX)

[Windows]MpJmCal: ERROR: 0055 :Cannot perform the operation because the Calendar service is currently starting. (detail=0xXX)

[UNIX]MpJmCal: ERROR: 0056 :Cannot perform the operation because the Calendar daemon is currently starting. (detail=0xXX)

MpJmCal: ERROR: 0057 :Unauthorized to perform the operation. (detail=0xXX)

MpJmCal: ERROR: 0058 :Invalid edition. Cannot perform the operation. (detail=0xXX)

MpJmCal: ERROR: 0059 :Failed to reread the file that defines hosts to apply the schedule. (detail=0xXX)

MpJmCal: ERROR: 0060 :Failed to create or modify the file that defines hosts to apply the schedule. (detail=0xXX)

[Windows]MpJmCal: ERROR: 0061 :Failed to obtain the account information.(detail=0xXX)

MpJmCal: ERROR: 0062 :Out of memory. (detail=0xXX)

[Windows]MpJmCal: ERROR: 0063 :Failed to open the registry key.(detail=0xXX)

[Windows]MpJmCal: ERROR: 0064 :Failed to obtain values from the registry. (detail=0xXX)

MpJmCal: ERROR: 0065 :Cannot find the source directory to send the data. (detail=0xXX)

MpJmCal: ERROR: 0066 :Failed to move the data. (detail=0xXX)

MpJmCal: ERROR: 0067 :Invalid path to the directory. (detail=0xXX)

[UNIX]MpJmCal: ERROR: 0068 :Failed to change the start order of the calendar daemon. (detail=0xXX)

MpJmCal: ERROR: 0069 :This command can be executed only in a cluster environment. (detail=0xXX)

MpJmCal: ERROR: 0070 :Failed to read the setup file for calendar environment. (detail=0xXX)

A file write error occurred.

A file write error occured.system_number=n

Administrator not qualified.

DBPATH is incorrect.

[Windows]ERROR: csv data output error

ERROR: CSV data output error

[Windows]ERROR: Failure in getting tree data for monitor_hosts_ex.

[Windows]ERROR: Failure in WSAStartup.

[Windows]ERROR: get tree data for monitor_hosts_ex.

ERROR: Input data error occurred.

ERROR: Input data error occurred. line=n

ERROR: monitor_hosts_ex file access error

ERROR: monitor_hosts_ex file open error

[Windows]ERROR: Systemwalker Centric Manager not found

ERROR: Systemwalker Operation Manager not found

[Windows]ERROR: temporary file not made

[UNIX]Jobscheduler daemon is started. The jmmode command cannot be used.

[UNIX]Jobscheduler:n daemon is started. The jmmode command cannot be used.

[UNIX]MicroJES daemon is started. The jmmode command cannot be used.

[UNIX]MicroJES:n daemon is started. The jmmode command cannot be used.

monitor_hosts_ex data get error.

[Windows]Systemwalker MpJobsch service is started. The jmmode command cannot be used.

[Windows]Systemwalker MpJobschn service is started. The jmmode command cannot be used.

[Windows]Systemwalker MpMjes service is started. The jmmode command cannot be used.

[Windows]Systemwalker MpMjesn service is started. The jmmode command cannot be used.

[UNIX]The LANG value is incorrect.

Usage: jmmode { continue | cancel | check } [-func { JOB | WRT }]

[Windows]Usage: omgrmonitor { -export filename [ -name monitored_host_configuration_name ] | -import filename [ -name monitored_host_configuration_name ] | -get filename }

[UNIX]Usage: omgrmonitor { -export filename [ -name monitored_host_configuration_name ] | -import filename [ -name monitored_host_configuration_name ] }

[UNIX]MpJobsch: ERROR: 0004: Usage: jobschprint { -n [-toplevel] [-long] | -s | -j | -i | -e [-long] | -w [-long] | -a | -p [-long] | -x [-long] | -y [-long] | -h calendar_name | -u [-long] | -b | -v | -o [-long] | -r [project_name/]job_net_name [-detail] [-long] | -m year month [-long] | -l year month [-long] | -c schedule_pattern_name | -d schedule_pattern_name | -f 0 to 5 [-vparam] [-long] | -g year month day [-vparam] [-long] | -N [-toplevel] [-long] | -S | -J | -I | -E [-long] | -W [-long] | -A | -P [-long] | -X [-long] | -Y [-long] | -O [-long] | -M year month [-long] | -L year month [-long] | -F 0 to 5 [-vparam] [-long] | -G year month day [-vparam] [-long] | -R [project_name/]group_name [-operate] | -rh calendar_name | -rsp schedule_pattern_name }

[UNIX]MpJobsch: ERROR: 0006: The jobscheduler failed to read job net information.

[UNIX]MpJobsch: ERROR: 0007: The jobscheduler failed to write job net information.

[UNIX]MpJobsch: WARNING: 0011: Job net information not found.

[UNIX]MpJobsch: ERROR: 0013: Usage: jobschcontrol [project_name/]job_net_name { start [-p param] | rerun [next | top] | cancel | pause | continue | disable | enable | cope | reinstate | revoke }

[UNIX]MpJobsch: ERROR: 0014: The daemon was not started.

[UNIX]MpJobsch: ERROR: 0015: Information on the job net not found.

[UNIX]MpJobsch: ERROR: 0016: DBPATH not found.

[UNIX]MpJobsch: ERROR: 0017: The jobscheduler failed to attach shared memory.

[UNIX]MpJobsch: ERROR: 0019: Job net was not found in job net information.

[UNIX]MpJobsch: ERROR: 0022: XXXX Erroneous record exists in job net information.

[UNIX]MpJobsch: ERROR: 0023: The jobscheduler message command argument is incorrect.

[UNIX]MpJobsch: ERROR: 0025: The jobscheduler failed to read message events information.

[UNIX]MpJobsch: ERROR: 0026: The jobscheduler failed in loading a library.[UNIX]MpJobsch: WARNING: 0026: The jobscheduler failed in loading a library.

[UNIX]MpJobsch: ERROR: 0027: The jobscheduler failed to retrieve day change time.Make sure that the calendar daemon has been started.

[UNIX]MpJobsch: ERROR: 0029: The number of projects has exceeded the maximum number (1000).[UNIX]MpJobsch: WARNING: 0029: The number of projects has exceeded the maximum number (1000).

[UNIX]MpJobsch: ERROR: 0034: Failure in reading project information.

[UNIX]MpJobsch: ERROR: 0035: Owner not specified.

[UNIX]MpJobsch: ERROR: 0040: Failed to read parameters for execution.

[UNIX]MpJobsch: ERROR: 0041: Invalid job net information.

[UNIX]MpJobsch: ERROR: 0043: XXXX The jobscheduler failed to read job net information file.

[UNIX]MpJobsch: ERROR: 0044: XXXX The jobscheduler failed to write job net information file.

[UNIX]MpJobsch: ERROR: 0046: The daemon failed to write log information.

[UNIX]MpJobsch: ERROR: 0050: Usage: jobschsetcal { -ent definition_file | -del schedule_pattern_name }

[UNIX]MpJobsch: ERROR: 0051: The jobscheduler failed to open schedule pattern file.

[UNIX]MpJobsch: ERROR: 0052: Invalid format.

[UNIX]MpJobsch: ERROR: 0056: Today is not a scheduled day and the group cannot be reactivated.

[UNIX]MpJobsch: ERROR: 0060: The jobscheduler failed to read the schedule pattern file.

[UNIX]MpJobsch: ERROR: 0061: Job information of the job net information file not found.

[UNIX]MpJobsch: ERROR: 0064: Failure in writing project information.

[UNIX]MpJobsch: ERROR: 0065: The job net is already in the executing or warning state.

[UNIX]MpJobsch: ERROR: 0067: The job net cannot be reactivated, because it is not in an abnormally ended state or forced or coping.

[UNIX]MpJobsch: ERROR: 0068: The job net is not in the executing or warning state.

[UNIX]MpJobsch: ERROR: 0071: The jobscheduler failed to open the definition file.

[UNIX]MpJobsch: ERROR: 0072: The keyword is incorrect. XXXX line.

[UNIX]MpJobsch: ERROR: 0074: Information cannot be added or modified.

[UNIX]MpJobsch: ERROR: 0075: The control statement or control statement sequence is incorrect. XXXX line.

[UNIX]MpJobsch: ERROR: 0077: The jobscheduler failed in writing to the schedule pattern file.

[UNIX]MpJobsch: ERROR: 0078: The schedule pattern name is not found.[UNIX]MpJobsch: WARNING: 0078: The schedule pattern name is not found.

[UNIX]MpJobsch: ERROR: 0081: The command argument is incorrect.

[UNIX]MpJobsch: WARNING: 0082: The executing job is not found.

[UNIX]MpJobsch: ERROR: 0083: The parameter is not found. XXXX line.

[UNIX]MpJobsch: ERROR: 0084: The parameter is incorrect. XXXX line.

[UNIX]MpJobsch: ERROR: 0085: Semicolon usage is incorrect. XXXX line.

[UNIX]MpJobsch: ERROR: 0086: XXXX is incorrect.

[UNIX]MpJobsch: WARNING: 0087: The jobscheduler (client) user is not found.

[UNIX]MpJobsch: WARNING: 0088: The waiting job is not found.

[UNIX]MpJobsch: WARNING: 0089: History information of job net is not found.

[UNIX]MpJobsch: ERROR: 0090: Calendar information not found.

[UNIX]MpJobsch: ERROR: 0091: Usage: jobschsethol { -ent definition_file | -del calendar_name }

[UNIX]MpJobsch: ERROR: 0093: The jobscheduler failed to update calendar information.[UNIX]MpJobsch: WARNING: 0093: The jobscheduler failed to update calendar information.

[UNIX]MpJobsch: ERROR: 0096: User does not belong to root group.

[UNIX]MpJobsch: ERROR: 0097: Restart the daemon.

[UNIX]MpJobsch: ERROR: 0098: Log information is not found.

[UNIX]MpJobsch: ERROR: 0099: The number of parameters is incorrect. XXXX line.

[UNIX]MpJobsch: ERROR: 0100: The jobscheduler failed to read/modify calendar information.

[UNIX]MpJobsch: ERROR: 0101: Usage: jobschsetnet { -nent [project_name] definition_file | -nche [project_name] definition_file | -ndel [project_name/]job_net_name | -ncpy [source_project_name/]source_job_net_name [destination_project_name/]destination_job_net_name | -sent [project_name] definition_file | -sdel [project_name/]job_net_name [SCH | MSG | TMP] }

[UNIX]MpJobsch: ERROR: 0102: Job net already exists.

[UNIX]MpJobsch: ERROR: 0103: The job net is not found.

[UNIX]MpJobsch: ERROR: 0104: The job net name is incorrect.

[UNIX]MpJobsch: ERROR: 0105: The definition file has errors.

[UNIX]MpJobsch: ERROR: 0106: The control statement is inconsistent. XXXX line.

[UNIX]MpJobsch: ERROR: 0107: The execution condition is not specified.

[UNIX]MpJobsch: ERROR: 0108: The holiday shift method is not specified.

[UNIX]MpJobsch: ERROR: 0110: The day field is not set. XXXX line.

[UNIX]MpJobsch: ERROR: 0111: The operand is duplicated. XXXX line.

[UNIX]MpJobsch: ERROR: 0112: The parameter is duplicated. XXXX line.

[UNIX]MpJobsch: ERROR: 0114: The operand sequence is incorrect. XXXX line.

[UNIX]MpJobsch: ERROR: 0121: Job net information not found.

[UNIX]MpJobsch: ERROR: 0148: Job net information is not found.

[UNIX]MpJobsch: ERROR: 0149: Failure to communicate among daemon processes.

[UNIX]MpJobsch: ERROR: 0152: XXXX The job net information is not found.

[UNIX]MpJobsch: ERROR: 0156: The jobscheduler fails to read model information.

[UNIX]MpJobsch: ERROR: 0158: XXXX The jobscheduler failed to write job net information.

[UNIX]MpJobsch: ERROR: 0164: The jobscheduler failed to send job net information.

[UNIX]MpJobsch: ERROR: 0175: XXXX project does not exist or access is denied.Reference job net is not added.

[UNIX]MpJobsch: ERROR: 0176: XXXX Erroneous record found in message events information.

[UNIX]MpJobsch: ERROR: 0178: The job net does not have message events information.

[UNIX]MpJobsch: ERROR: 0179: XXXX failed in the backup.

[UNIX]MpJobsch: ERROR: 0181: The file is invalid.

[UNIX]MpJobsch: ERROR: 0182: XXXX project name is too long.

[UNIX]MpJobsch: ERROR: 0187: NQS is not supported.

[UNIX]MpJobsch: ERROR: 0188: Execution failed because the jobscheduler(client) is in use.

[UNIX]MpJobsch: ERROR: 0191: XXXX cannot be executed.

[UNIX]MpJobsch: ERROR: 0204: Erroneous record found in calendar information.

[UNIX]MpJobsch: ERROR: 0205: Erroneous record found in schedule pattern information.

[UNIX]MpJobsch: ERROR: 0206: The daemon failed in the re-schedule.

[UNIX]MpJobsch: ERROR: 0209: Usage: jobschmsgclear { -all [project_name] | -net [project_name/]job_net_name }

[UNIX]MpJobsch: ERROR: 0212: XXXX The jobscheduler fails to read group information file.

[UNIX]MpJobsch: ERROR: 0214: The jobscheduler failed to read group information.

[UNIX]MpJobsch: ERROR: 0215: XXXX Erroneous record found in group information.

[UNIX]MpJobsch: ERROR: 0218: XXXX The jobscheduler failed to write group information file.

[UNIX]MpJobsch: ERROR: 0219: The jobscheduler failed to write group information.

[UNIX]MpJobsch: INFO: 0221: The size of log information has exceeded the maximum value.

[UNIX]MpJobsch: ERROR: 0225: The job net is being saved or controlled.

[UNIX]MpJobsch: ERROR: 0226: The group is being saved or controlled.

[UNIX]MpJobsch: ERROR: 0227: Usage: jobschctlgrp [project_name/]group_name { start | rerun | cancel | pause | continue | disable | enable | cope }

[UNIX]MpJobsch: ERROR: 0228: The group is already found.

[UNIX]MpJobsch: ERROR: 0229: The group is not found.[UNIX]MpJobsch: WARNING: 0229: The group is not found.

[UNIX]MpJobsch: ERROR: 0231: The job net already exists in a group.

[UNIX]MpJobsch: ERROR: 0232: The job net is not in a group.

[UNIX]MpJobsch: ERROR: 0233: The job net is not being paused.

[UNIX]MpJobsch: ERROR: 0234: The job net is already being paused.

[UNIX]MpJobsch: ERROR: 0235: The job net is not being disabled.

[UNIX]MpJobsch: ERROR: 0236: The job net is already being disabled.

[UNIX]MpJobsch: ERROR: 0237: The group is already being executed or warned.

[UNIX]MpJobsch: ERROR: 0239: The group cannot be reactivated, because it is not in an abnormally ended state or forced or coping.

[UNIX]MpJobsch: ERROR: 0240: The group is not being executed or warned.

[UNIX]MpJobsch: ERROR: 0243: The group is not being ended abnormally.

[UNIX]MpJobsch: ERROR: 0244: XXXX is already in a group.

[UNIX]MpJobsch: ERROR: 0245: XXXX execution condition is not single.

[UNIX]MpJobsch: ERROR: 0246: XXXX message activation method is sequential.

[UNIX]MpJobsch: ERROR: 0247: Usage: jobschsetgrp { -ent [project_name ] definition_file | -che [project_name ] definition_file | -del [project_name/]group_name }

[UNIX]MpJobsch: ERROR: 0248: The job is not defined in the definition file.

[UNIX]MpJobsch: ERROR: 0250: Usage: jobschmove { -group [project_name/]group_name [target_group_name] | -gnet [project_name/]group_name [target_job_net_name] | -net [project_name/]job_net_name [target_job_net_name] }

[UNIX]MpJobsch: ERROR: 0251: The group is same as the target group.

[UNIX]MpJobsch: ERROR: 0252: The group includes the target job net.

[UNIX]MpJobsch: ERROR: 0253: The job net is same as the target job net.

[UNIX]MpJobsch: ERROR: 0254: Usage: jobschcod time(from 0000 to 2359)

[UNIX]MpJobsch: ERROR: 0256: The job net is not defined in the definition file.

[UNIX]MpJobsch: ERROR: 0258: XXXX user name is too long.

[UNIX]MpJobsch: ERROR: 0259: The group including the job net is being saved or controlled.

[UNIX]MpJobsch: ERROR: 0260: The group including the job net is already being executed or warned.

[UNIX]MpJobsch: ERROR: 0261: Invalid group information.

[UNIX]MpJobsch: ERROR: 0262: Group information not found.

[UNIX]MpJobsch: ERROR: 0263: XXXX The jobscheduler failed to read the message information file.

[UNIX]MpJobsch: ERROR: 0266: The group information is inconsistent.

[UNIX]MpJobsch: ERROR: 0271: The cope operation to the group is invalid.

[UNIX]MpJobsch: ERROR: 0273: The daemon is being started.

[UNIX]MpJobsch: WARNING: 0274: Valid project not found.

[UNIX]MpJobsch: ERROR: 0275: Project name is not specified.

[UNIX]MpJobsch: ERROR: 0276: The LANG value is incorrect.

[UNIX]MpJobsch: ERROR: 0277: PowerAIM is not supported.

[UNIX]MpJobsch: ERROR: 0278: XXXX daemon is started. The jobschconvert command cannot be used.

[UNIX]MpJobsch: WARNING: 0279: XXXX database file is not convert.

[UNIX]MpJobsch: ERROR: 0280: The job net information file is not found.

[UNIX]MpJobsch: ERROR: 0281: XXXX The job net information file already exists.

[UNIX]MpJobsch: ERROR: 0282: Usage: jobschconvert [ SJIS | EUC ]

[UNIX]MpJobsch: ERROR: 0283: The calendar name is not found.

[UNIX]MpJobsch: WARNING: 0286: XXXX The trace function cannot be used.

[UNIX]MpJobsch: WARNING: 0288: The LANG value is different. Reset LANG environment variable. Rerun command.

[UNIX]MpJobsch: ERROR: 0289: The job net is not being ended abnormally.

[UNIX]MpJobsch: ERROR: 0290: The cope operation to the job net is invalid.

[UNIX]MpJobsch: ERROR: 0291: The group is already being paused.

[UNIX]MpJobsch: ERROR: 0292: The group is already being disabled.

[UNIX]MpJobsch: ERROR: 0293: The group is not being paused.

[UNIX]MpJobsch: ERROR: 0294: The group is not being disabled.

[UNIX]MpJobsch: WARNING: 0296: The calendar information is not found.

[UNIX]MpJobsch: ERROR: 0298: Failure in communicating with the calendar daemon.

[UNIX]MpJobsch: ERROR: 0300: usage: jobschsetproject { -ent definition_file | -del project_name }

[UNIX]MpJobsch: ERROR: 0301: The ACL manager daemon is not started.

[UNIX]MpJobsch: ERROR: 0302: Invalid project name.

[UNIX]MpJobsch: ERROR: 0303: Cannot delete because job net information exists.

[UNIX]MpJobsch: ERROR: 0304: Invalid user name.

[UNIX]MpJobsch: WARNING: 0305: XXXX Cannot convert because calendar name already exists or an invalid character code is included.

[UNIX]MpJobsch: ERROR: 0306: calendar=XXXX errorcode=YYYY Error has been detected in calendar daemon (API) while converting the calendar.

[UNIX]MpJobsch: ERROR: 0307: Start date of temporary change has not been specified.

[UNIX]MpJobsch: ERROR: 0308: Cannot delete SYSTEM_CALENDAR.

[UNIX]MpJobsch: ERROR: 0309: Usage: jobschmsgevent event_name[:project_name [/job_net_name] [message_text]] [-h host_name] [-t:INFO | -t:WARN | -t:ERROR] [-p param [-c suffix | -cauto]]

[UNIX]MpJobsch: ERROR: 0312: Interstage isn't supported.

[UNIX]MpJobsch: ERROR: 0313: Usage: jobschprint { -n [-toplevel] [-long] | -s | -j | -i | -e [-long] | -w [-long] | -a | -p [-long] | -x [-long] | -y [-long] | -h calendar_name | -u [-long] | -b | -v | -o [-long] | -r [project_name/]job_net_name [-detail] [-operate] | -m year month [-long] | -l year month [-long] | -c schedule_pattern_name | -d schedule_pattern_name | -f 0 to 5 [-vparam] [-long] | -g year month day [-vparam] [-long] | -N [-toplevel] [-long] | -S | -J | -I | -E [-long] | -W [-long] | -A | -P [-long] | -X [-long] | -Y [-long] | -O [-long] | -M year month [-long] | -L year month [-long] | -F 0 to 5 [-vparam] [-long] | -G year month day [-vparam] [-long] | -R [project_name/]group_name [-operate] | -rh calendar_name | -rsp schedule_pattern_name } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0314: Usage: jobschcontrol [project_name/]job_net_name { start [-p param] | rerun [next | top] | cancel | pause | continue | disable | enable | cope | reinstate | revoke } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0315: Usage: jobschsetcal { -ent definition_file | -del schedule_pattern_name } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0316: Usage: jobschsetnet { -nent [project_name] definition_file | -nche [project_name] definition_file | -ndel [project_name/]job_net_name | -ncpy [source_project_name/]source_job_net_name [destination_project_name/]destination_job_net_name | -sent [project_name] definition_file | -sdel [project_name/]job_net_name [SCH | MSG | TMP] } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0317: Usage: jobschmsgclear { -all [project_name] | -net [project_name/]job_net_name } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0318: Usage: jobschctlgrp [project_name/]group_name { start | rerun | cancel | pause | continue | disable | enable | cope } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0319: Usage: jobschsetgrp { -ent [project_name ] definition_file | -che [project_name ] definition_file | -del [project_name/]group_name } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0320: Usage: jobschmove { -group [project_name/]group_name [target_group_name] | -gnet [project_name/]group_name [target_job_net_name] | -net [project_name/]job_net_name [target_job_net_name] } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0321: Usage: jobschconvert [ SJIS | EUC ] [-sys {0 to 9 | all}]

[UNIX]MpJobsch: ERROR: 0322: usage: jobschsetproject { -ent definition_file | -del project_name } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0323: Usage: jobschmsgevent event_name[:project_name [/job_net_name] [message_text]] [-h host_name] [-t:INFO | -t:WARN | -t:ERROR] [-p param [-c suffix]] [-sys {0 to 9 | all}]

[UNIX]MpJobsch: WARNING: 0334: The number of job nets exceeded the maximum number.

[UNIX]MpJobsch: WARNING: 0335: Usage: jobschpoconvert

[UNIX]MpJobsch: WARNING: 0336: Usage: jobschpoconvert [-sys 0 to 9]

[UNIX]MpJobsch: WARNING: 0339: The number of job nets exceeded the warning level.

[UNIX]MpJobsch: ERROR: 0342: swadmin isn't registered in /etc/group.

[UNIX]MpJobsch: ERROR: 0344: User does not belong to permitting group.

[UNIX]MpJobsch: ERROR: 0354: The job net is a child job net.

[UNIX]MpJobsch: ERROR: 0355: XXXX cannot add with the current execution condition.

[UNIX]MpJobsch: ERROR: 0356: XXXX (Child job net) does not exist.

[UNIX]MpJobsch: ERROR: 0357: XXXX (Parent job net) does not exist.

[UNIX]MpJobsch: ERROR: 0358: XXXX cannot add a child job net with current execution condition.

[UNIX]MpJobsch: ERROR: 0359: XXXX already has parent job net.

[UNIX]MpJobsch: ERROR: 0360: Number of levels in job net exceeded the maximum limit.

[UNIX]MpJobsch: ERROR: 0361: Levels in the job net loops.

[UNIX]MpJobsch: ERROR: 0362: XXXX (Parent job net) does not have job execution control.

[UNIX]MpJobsch: ERROR: 0363: XXXX (Child job net) does not have job execution control.

[UNIX]MpJobsch: ERROR: 0364: Job net does not have information on start up days and operation schedule.

[UNIX]MpJobsch: ERROR: 0365: The jobscheduler failed to write parameter information file.

[UNIX]MpJobsch: ERROR: 0366: The jobscheduler failed to read parameter information file.

[UNIX]MpJobsch: ERROR: 0367: Parent job net does not copy.

[UNIX]MpJobsch: ERROR: 0368: The job net is not being ended abnormally or forcedly.

[UNIX]MpJobsch: ERROR: 0369: The group is not being ended abnormally or forcedly.

[UNIX]MpJobsch: ERROR: 0370: End pointer is invalid.

[UNIX]MpJobsch: ERROR: 0371: The jobscheduler failed to read end pointer.

[UNIX]MpJobsch: ERROR: 0372: The jobscheduler failed to write end pointer.

[UNIX]MpJobsch: ERROR: 0373: XXXX The file is not a normal file.

[UNIX]MpJobsch: ERROR: 0374: XXXX Access denied.

[UNIX]MpJobsch: ERROR: 0375: Specified regular expression is invalid.

[UNIX]MpJobsch: ERROR: 0376: Latest rendez-vous time must be after the rendez-vous time.

[UNIX]MpJobsch: ERROR: 0377: XXXX The jobscheduler failed to read a file.

[UNIX]MpJobsch: ERROR: 0378: XXXX The jobscheduler failed to write a file.

[UNIX]MpJobsch: ERROR: 0379: The jobscheduler failed to read a temporary file.

[UNIX]MpJobsch: ERROR: 0380: The jobscheduler failed to write a temporary file.

[UNIX]MpJobsch: INFO: 0381: XXXX() YYYY

[UNIX]MpJobsch: ERROR: 0382: Usage: jobschchecklog { -a -f log_file -e reg_expr [-s] [-v] [-z] | -f log_file -e reg_expr [-k key] [-s] [-v] [-z] | -h -f log_file [-k key] }

[UNIX]MpJobsch: ERROR: 0383: Usage: jobschchecklog { -a -f log_file -e reg_expr [-s] [-v] [-z] | -f log_file -e reg_expr [-k key] [-s] [-v] [-z] | -h -f log_file [-k key] } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0384: Usage: jobschchecktime -wt rendez-vous_time [-lt latest_rendez-vous_time]

[UNIX]MpJobsch: ERROR: 0385: Usage: jobschchecktime -wt rendez-vous_time [-lt latest_rendez-vous_time] [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0387: Failed to obtain privilege information for the user. (XXXX)

[UNIX]MpJobsch: ERROR: 0388: XXXX File not found.

[UNIX]MpJobsch: ERROR: 0389: Cannot revoke the job net because it is not carried over.

[UNIX]MpJobsch: ERROR: 0390: Cannot reinstate the job net because its execution condition is not 'Start Only When Message Event Has Occurred' or 'Once in a day' is not specified.

[UNIX]MpJobsch: ERROR: 0391: Cannot reinstate the job net because it is not executed today.

[UNIX]MpJobsch: ERROR: 0392: Cannot reinstate the job net because it is being paused or disabled.

[UNIX]MpJobsch: ERROR: 0393: Usage: jobschnetmemo { -ent [project_name/] job_net_name memo | -del [project_name/]job_net_name | -out [project_name/] job_net_name | -find [-p project_name] -e reg_expr [-m] }

[UNIX]MpJobsch: ERROR: 0394: Usage: jobschnetmemo { -ent [project_name/] job_net_name memo | -del [project_name/]job_net_name | -out [project_name/] job_net_name | -find [-p project_name] -e reg_expr [-m] } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0395: The memo is too long.

[UNIX]MpJobsch: ERROR: 0396: Detected an error in the memo.

[UNIX]MpJobsch: ERROR: 0397: Usage: jobschchkfile { [-fwait [-sw]] [-fdelete [-sd]] [-fsize|-fupdate] [-i <monitoring interval>] <file name> | [-wait|-update[-d:yyyymmdd] [-t:hhmm]|-delete] [-i <monitoring interval>] {<file name>|-file:<list file name> [-AND|-OR]} | [-z] <file name> }

[UNIX]MpJobsch: ERROR: 398: Usage: jobschctljob [project_name/] job_net_name/job_name { rerun | cancel | pause | continue | disable | enable }

[UNIX]MpJobsch: ERROR: 0399: Usage: jobschctljob [project_name/] job_net_name/job_name { rerun | cancel | pause | continue | disable | enable } [-sys 0 to 9]

[UNIX]MpJobsch: ERROR: 0400: Cannot control the job.

[UNIX]MpJobsch: ERROR: 0401: The job is not found.

[UNIX]MpJobsch: ERROR: 0402: Two or more jobs with the same job name exist.

[UNIX]MpJobsch: ERROR: 0403: The job is being controlled.

[UNIX]MpJobsch: ERROR: 0404: The job is not being executed or delayed.

[UNIX]MpJobsch: ERROR: 0405: The job cannot be reactivated, because the job net is not in the executing or warning state.

[UNIX]MpJobsch: ERROR: 0406: The job cannot be reactivated, because it is not in an abnormally ended state or forced.

[UNIX]MpJobsch: ERROR: 0407: The job is already in the executing or delaying state.

[UNIX]MpJobsch: ERROR: 0408: The job is not being paused.

[UNIX]MpJobsch: ERROR: 0409: The job is already being paused.

[UNIX]MpJobsch: ERROR: 0410: The job is not being disabled.

[UNIX]MpJobsch: ERROR: 0411: The job is already being disabled.

[UNIX]MpJobsch: ERROR: 0412: XXXX() YYYY

[UNIX]MpJobsch: ERROR: 0413: The year is incorrect.

[UNIX]MpJobsch: ERROR: 0414: Cannot control the job because the recovery job is currently running.

[UNIX]MpJobsch: ERROR: 0415: Failure in access acquisition.

[UNIX]MpJobsch: ERROR: 0416: The project is not found.

[UNIX]MpJobsch: ERROR: 0417: The message event name is not found.

[UNIX]MpJobsch: ERROR: 0425: Specified job icon is not supported.

[UNIX]MpJobsch: WARNING: 0426: Failed to load the audit log library.

[UNIX]MpJobsch: WARNING: 0427: Failed to read the audit log file.

MpJobsch: ERROR: 0431: XXXX YYYY Copy and startup of a job net failed.

[UNIX]MpJobsch: WARNING: 0432: XXXX YYYY A variable parameter has been ignored.

[UNIX]MpJobsch: ERROR: 0435: XXXX YYYY ZZZZ The message event with specified variable parameters has been ignored.

[UNIX]MpJobsch: ERROR: 0436: Job nets that have been copied by copying and starting up cannot be operated.

[UNIX]MpJobsch: ERROR: 0437: XXXX Failed to read parameter information.

[UNIX]MpJobsch: ERROR: 0438: XXXX Failed to write parameter information.

[UNIX]MpJobsch: ERROR: 0439: XXXX Failed to write variable parameter information.

[UNIX]MpJobsch: ERROR: 0440: The specified job net cannot be started using variable parameters.

[UNIX]MpJobsch: ERROR: 0441: The regular expression is too long.

[UNIX]MpJobsch: WARNING: 0442: Cannot find job nets in which remarks containing regular expressions have been registered.

[UNIX]MpJobsch: ERROR: 0447: The job net is a linked job net, therefore the specified operation is not possible.

[UNIX]MpJobsch: ERROR: 0448: The job net is a master linked job net, therefore the specified operation is not possible.

[UNIX]MpJobsch: ERROR: 0449: The master linked job net job operation is not possible.

[UNIX]MpJobsch: ERROR: 0450: XXXX (master linked job net) does not exist.

[UNIX]MpJobsch: ERROR: 0451: XXXX The linked job net cannot be registered using the current execution condition.

[UNIX]MpJobsch: ERROR: 0452: XXXX is not a job execution control attribute, therefore it cannot be registered as a linked job net.

[UNIX]MpJobsch: ERROR: 0453: The linked job net cannot be registered.

[UNIX]MpJobsch: ERROR: 0454: XXXX A job net already exists with the same name, therefore the linked job net cannot be registered.

[UNIX]MpJobsch: ERROR: 0455: XXXX A job net already exists with the same name as the child job net of linked job net, therefore the linked job net cannot be registered.

[UNIX]MpJobsch: ERROR: 0456: XXXX The length of the job net name for linked job net has exceeded the limit, therefore the linked job net cannot be registered.

[UNIX]MpJobsch: ERROR: 0457: The linked job net cannot be copied.

[UNIX]MpJobsch: ERROR: 0458: The linked job net is executing or has warning status, therefore the specified operation is not possible.

[UNIX]MpJobsch: ERROR: 0459: XXXX The limit for the number of registered linked job nets connected to the master linked job net was exceeded, therefore the linked job net cannot be registered.

[UNIX]MpJobsch: ERROR: 0460: XXXX is a master linked job net, therefore it cannot be registered as a child job net.

[UNIX]MpJobsch: ERROR: 0461: The linked job net is being saved or controlled, therefore the specified operation is not possible.

[UNIX]MpJobsch: ERROR: 0462: The master linked job net is executing or has warning status, therefore the specified operation is not possible.

[UNIX]MpJobsch: ERROR: 0463: The master linked job net is being saved or controlled, therefore the specified operation is not possible.

[UNIX]MpJobsch: ERROR: 0464: XXXX The job net name and linked job net name are the same, therefore the linked job net cannot be registered.

[UNIX]MpJobsch: ERROR: 0465: XXXX There is a linked job net in the layer under the child job net, therefore it cannot be registered as a child job net.

[UNIX]MpJobsch: ERROR: 0468: Usage: jobschchknetvar <variable name> [-num <operator specified for Condition>,<comparison value>[<operator specified for Condition 2>,<comparison value 2>] | -char <comparison condition>,<comparison string>] [-z]

MpJobsch: ERROR: 0469: Usage: jobschsleep <wait time>

[UNIX]MpJobsch: ERROR: 0515: XXXX Cannot register as a child job net, because the copy and startup setting is enabled.

[UNIX]MpJobsch: ERROR: 0516: XXXX Cannot register as a linked job net, because the copy and startup setting is enabled.

[UNIX]MpJobsch: ERROR: 0517: XXXX Cannot register to the group, because the copy and startup setting is enabled.

[UNIX]MpJobsch: ERROR: 0518: Cannot register the job net if the length of the job net name or job net comment exceeds the limit, because the copy and startup setting for the top parent job net is enabled.

[UNIX]MpJobsch: ERROR: 0519: Cannot register the job net as a linked job net if the length of the job net name or job net comment exceeds the limit, because the copy and startup setting for the top parent job net is enabled.

[UNIX]MpJobsch: ERROR: 0520: Cannot copy the job net with the copy and startup setting enabled, because the length of the copy destination job net name exceeds the limit.

[UNIX]MpJobsch: ERROR: 0521: Execute the command as a local job of the Jobscheduler.

[UNIX]MpJobsch: ERROR: 0522: Usage: jobschchkmsgevt <message event name> [-i <monitoring interval>]

[UNIX]MpJobsch: ERROR: 0523: Failed to read the message event occurrence history file.

[UNIX]MpJobsch: ERROR: 0524: Failed to write to the message event occurrence history file.

[UNIX]MpJobsch: ERROR: 0530: XXXX Cannot change the job net comment if the length exceeds the limit, because the copy and startup setting is enabled.

[UNIX]MpJobsch: ERROR: 0531: Cannot restart the job, because it was canceled by the OR condition of the succeeding job.

[Windows]MpJobsch: INFO: 1004: Usage: jobschprint {-n [-toplevel] [-long] |-s |-j |-i | -e [-long] | -w [-long] | -a | -q [-long] | -p [-long] | -x [-long] | -y [-long] | -h calendar_name | -u [-long] | -b | -v | -o [-long] | -r [project_name/] job_net_name [-detail] [-operate] | -m year month [-long] | -l year month [-long] | -c schedule_pattern_name| -d schedule_pattern_name| -f 0 to 5 [-vparam] [-long] | -g year month day [-vparam] [-long] | -N [-toplevel] [-long] | -S | -J | -I |-E [-long] | -W [-long] | -A | -Q [-long] | -P [-long] | -X [-long] | -Y [-long] | -O [-long] | -M year month [-long] | -L year month [-long] | -F 0 to 5 [-vparam] [-long] | -G year month day [-vparam] [-long] | -R [ project_name/ ] group_name [-operate] | -rh calendar_name | -rsp schedule_pattern_name }

[Windows]MpJobsch: INFO: 1013: Usage: jobschcontrol [project_name/]job_net_name { start | rerun [next | top] | cancel | pause | continue | disable | enable | cope | reinstate | revoke }

[Windows]MpJobsch: INFO: 1014: Usage: createsubsystem.exe -sys { 1 to 9 }

[Windows]MpJobsch: INFO: 1015: Usage: deletesubsystem.exe -sys { 1 to 9 }

[Windows]MpJobsch: INFO: 1050: Usage: jobschsetcal { -ent definition_file | -del schedule_pattern_name }

[Windows]MpJobsch: INFO: 1091: Usage: jobschsethol { -ent definition_file | -del calendar_name }

[Windows]MpJobsch: INFO: 1101: Usage: jobschsetnet { -nent [project_name] definition_file | -nche [project_name] definition_file | -ndel [project_name/]job_net_name | -ncpy [source_project_name/]source_job_net_name [destination_project_name/]destination_job_net_name | -sent [project_name] definition_file | -sdel [project_name/]job_net_name [SCH | MSG | TMP] }

[Windows]MpJobsch: INFO: 1209: Usage: jobschmsgclear { -all [project_name] | -net [project_name/]job_net_name }

[Windows]MpJobsch: INFO: 1221: The size of log information has exceeded the maximum value.

[Windows]MpJobsch: INFO: 1227: Usage: jobschctlgrp [project_name/]group_name { start | rerun | cancel | pause | continue | disable | enable | cope }

[Windows]MpJobsch: INFO: 1247: Usage: jobschsetgrp { -ent [project_name ] definition_file | -che [project_name] definition_file | -del [project_name/]group_name }

[Windows]MpJobsch: INFO: 1250: Usage: jobschmove { -group [project_name/]group_name [target_group_name] | -gnet [project_name/]group_name [target_job_net_name] | -net [project_name/]job_net_name [target_job_net_name] }

[Windows]MpJobsch: INFO: 1254: Usage: jobschcod time(from 0000 to 2359)

[Windows]MpJobsch: INFO: 1282: Usage: jobschconvert

[Windows]MpJobsch: INFO: 1302: Usage: jobschmsgevent message_event_name[:project_name[/job_net_name]] [host_name | -f:file_name] [-t:INFO | -t:WARN | -t:ERROR] [-p variable parameter [-c suffix]]

[Windows]MpJobsch: INFO: 1303: Usage: jobschcancelnet project_name job_net_name [-all]

[Windows]MpJobsch: INFO: 1304: The job net does not exist in the execution queue.

[Windows]MpJobsch: INFO: 1305: Usage: jshtrace {-s | -t | -rs | -rt}

[Windows]MpJobsch: INFO: 1309: Usage: chkfile { [-fwait [-sw]] [-fdelete [-sd]] [-fsize|-fupdate] [-i interval] [-a] drive: file_name | [-wait|-update[-d:yyyymmdd][-t:hhmm]|-delete] [-i interval] {drive: file_name |-file:drive:list_file_name [-AND|-OR]} | [-z] drive: file_name }

[Windows]MpJobsch: INFO: 1311: Usage: jobschsetproject { -ent definition_file | -del project_name } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1312: Usage: jobschpoconvert

[Windows]MpJobsch: INFO: 1313: Usage: jobschprint {-n [-toplevel] [-long] |-s |-j |-i | -e [-long] | -w [-long] | -a | -q [-long] | -p [-long] | -x [-long] | -y [-long] | -h calendar_name | -u [-long] | -b | -v | -o [-long] | -r [project_name/] job_net_name [-detail] [-operate] | -m year month [-long] | -l year month [-long] | -c schedule_pattern_name| -d schedule_pattern_name| -f 0 to 5 [-vparam] [-long] | -g year month day [-vparam] [-long] | -N [-toplevel] [-long] | -S | -J | -I |-E [-long] | -W [-long] | -A | -Q [-long] | -P [-long] | -X [-long] | -Y [-long] | -O [-long] | -M year month [-long] | -L year month [-long] | -F 0 to 5 [-vparam] [-long] | -G year month day [-vparam] [-long] | -R [ project_name/ ] group_name [-operate] | -rh calendar_name | -rsp schedule_pattern_name } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1314: Usage: jobschcontrol [project_name/]job_net_name { start [-p variable parameter] | rerun [next | top] | cancel | pause | continue | disable | enable | cope | reinstate | revoke } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1315: Usage: jobschsetcal { -ent definition_file | -del schedule_pattern_name } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1316: Usage: jobschsetnet { -nent [project_name] definition_file | -nche [project_name] definition_file | -ndel [project_name/]job_net_name | -ncpy [source_project_name/]source_job_net_name [destination_project_name/]destination_job_net_name | -sent [project_name] definition_file | -sdel [project_name/]job_net_name [SCH | MSG | TMP] } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1317: Usage: Usage: jobschmsgclear { -all [project_name] | -net [project_name/]job_net_name } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1318: Usage: jobschctlgrp [project_name/]group_name { start | rerun | cancel | pause | continue | disable | enable | cope } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1319: Usage: jobschsetgrp { -ent [project_name ] definition_file | -che [project_name ] definition_file | -del [project_name/]group_name } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1320: Usage: jobschmove { -group [project_name/]group_name [target_group_name] | -gnet [project_name/]group_name [target_job_net_name] | -net [project_name/]job_net_name [target_job_net_name] } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1321: Usage: jobschconvert [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1331: Usage: jobschpoconvert [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1332: Usage: jobschmsgevent message_event_name[:project_name[/job_net_name]] [host_name | -f:file_name] [-t:INFO | -t:WARN | -t:ERROR] [-p variable parameter [-c suffix]] [-sys {0 to 9 | all}]

[Windows]MpJobsch: INFO: 1333: Usage: jobschcancelnet project_name job_net_name [-all] [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1383: Usage: jobschchecklog { -a -f log_file -e reg_expr [-s] [-v] [-z] | -f log_file -e reg_expr [-k key] [-s] [-v] [-z] | -h -f log_file [-k key] } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1384: Usage: jobschchecktime -wt rendez-vous_time [-lt latest_rendez-vous_time]

[Windows]MpJobsch: INFO: 1385: Usage: jobschchecktime -wt rendez-vous_time [-lt latest_rendez-vous_time] [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1393: Usage: jobschnetmemo { -ent [project_name/]job_net_name memo | -del [project_name/]job_net_name | -out [project_name/]job_net_name | -find [-p project_name] -e reg_expr [-m] }

[Windows]MpJobsch: INFO: 1394: Usage: jobschnetmemo { -ent [project_name/]job_net_name memo | -del [project_name/]job_net_name | -out [project_name/]job_net_name | -find [-p project_name] -e reg_expr [-m] } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1398: Usage: jobschctljob [project_name/]job_net_name/job_name { rerun | cancel | pause | continue | disable | enable }

[Windows]MpJobsch: INFO: 1399: Usage: jobschctljob [project_name/]job_net_name/job_name { rerun | cancel | pause | continue | disable | enable } [-sys 0 to 9]

[Windows]MpJobsch: INFO: 1468: Usage: jobschchknetvar varname [-num operator,value[,operator2,value2] | -char comp method,char string] [-z]

[Windows]MpJobsch: INFO: 1469: Usage: jobschsleep sleep_sec

[Windows]MpJobsch: INFO: 1522: Usage: jobschchkmsgevt <message event_name> [-i <monitoring interval>]

[Windows]MpJobsch: INFO: 2300: XXXX command ended normally.

[Windows]MpJobsch: INFO: 2301: XXXX message event occurred.

[Windows]MpJobsch: INFO: 2302: Message event occurred.(XXXX)

[Windows]MpJobsch: WARNING: 3011: Job net information not found.

[Windows]MpJobsch: WARNING: 3078: The schedule pattern name is not found.

[Windows]MpJobsch: WARNING: 3082: The executing job is not found.

[Windows]MpJobsch: WARNING: 3087: The jobscheduler (client) user is not found.

[Windows]MpJobsch: WARNING: 3088: The waiting job is not found.

[Windows]MpJobsch: WARNING: 3089: History information of job net is not found.

[Windows]MpJobsch: WARNING: 3229: The group is not found.

[Windows]MpJobsch: WARNING: 3274: Valid project not found.

[Windows]MpJobsch: WARNING: 3296: The calendar information is not found.

[Windows]MpJobsch: WARNING: 3303: Number of projects has exceeded the limit (1000).

[Windows]MpJobsch: WARNING: 3304: The number of job nets exceeded the maximum number.

[Windows]MpJobsch: WARNING: 3305: The number of job nets exceeded the warning level.

[Windows]MpJobsch: WARNING: 3426: Failed to load the audit log library.

[Windows]MpJobsch: WARNING: 3427: Failed to read the audit log file.

Windows]MpJobsch: WARNING: 3442: Cannot find job nets in which remarks containing regular expressions have been registered.

[Windows]MpJobsch: WARNING: 4279: XXXX database file is not converted.

[Windows]MpJobsch: WARNING: 4286: XXXX The trace function cannot be used.

[Windows]MpJobsch: WARNING: 4304: Cannot convert to Systemwalker MpJmCal because calendar name (XXXX) already exists or an invalid character code is included.

[Windows]MpJobsch: ERROR: 6006: Systemwalker MpJobsch failed to read job net information.

[Windows]MpJobsch: ERROR: 6007: Systemwalker MpJobsch failed to write job net information.

[Windows]MpJobsch: ERROR: 6014: Systemwalker MpJobsch service not started.

[Windows]MpJobsch: ERROR: 6016: DBPATH not found.

[Windows]MpJobsch: ERROR: 6017: Systemwalker MpJobsch failed to attach shared memory.

[Windows]MpJobsch: ERROR: 6019: Job net not found in job net information.

[Windows]MpJobsch: ERROR: 6023: The tskmmsrv argument is incorrect.

[Windows]MpJobsch: ERROR: 6025: Systemwalker MpJobsch failed to read message events information.

[Windows]MpJobsch: ERROR: 6026: Systemwalker MpJobsch failed in loading a library.

[Windows]MpJobsch: ERROR: 6027: Systemwalker MpJobsch failed to retrieve day change time.

[Windows]MpJobsch: ERROR: 6029: The number of projects has exceeded the maximum number (1000).

[Windows]MpJobsch: ERROR: 6031: Job information does not exist.

[Windows]MpJobsch: ERROR: 6034: Failure in reading project information.

[Windows]MpJobsch: ERROR: 6035: Owner not specified.

[Windows]MpJobsch: ERROR: 6040: Failed to read parameters for execution.

[Windows]MpJobsch: ERROR: 6041: Invalid job net information.

[Windows]MpJobsch: ERROR: 6046: Systemwalker MpJobsch failed to write log information.

[Windows]MpJobsch: ERROR: 6051: Systemwalker MpJobsch failed to open schedule pattern file.

[Windows]MpJobsch: ERROR: 6052: Invalid format.

[Windows]MpJobsch: ERROR: 6056: Today is not a scheduled day and the group cannot be reactivated.

[Windows]MpJobsch: ERROR: 6060: Systemwalker MpJobsch failed to read the schedule pattern file.

[Windows]MpJobsch: ERROR: 6064: Failure in writing project information.

[Windows]MpJobsch: ERROR: 6065: The job net is already in the executing or warning state.

[Windows]MpJobsch: ERROR: 6067: The job net cannot be reactivated, because it is not state of ended abnormally and forced and coping.

[Windows]MpJobsch: ERROR: 6068: The job net is not in the executing or warning state.

[Windows]MpJobsch: ERROR: 6071: Systemwalker MpJobsch failed to open the definition file.

[Windows]MpJobsch: ERROR: 6074: Information cannot be added or modified.

[Windows]MpJobsch: ERROR: 6077: Systemwalker MpJobsch failed in writing to the schedule pattern file.

[Windows]MpJobsch: ERROR: 6078: The schedule pattern name is not found.

[Windows]MpJobsch: ERROR: 6081: The command argument is incorrect.

[Windows]MpJobsch: ERROR: 6090: Calendar information not found.

[Windows]MpJobsch: ERROR: 6093: Systemwalker MpJobsch failed to update calendar information.

[Windows]MpJobsch: ERROR: 6096: User does not belong to "Administrators" group.

[Windows]MpJobsch: ERROR: 6097: Restart the Systemwalker MpJobsch.

[Windows]MpJobsch: ERROR: 6098: Log information is not found.

[Windows]MpJobsch: ERROR: 6100: Systemwalker MpJobsch failed to read/modify calendar information.

[Windows]MpJobsch: ERROR: 6102: The job net already exists.

[Windows]MpJobsch: ERROR: 6103: The job net is not found.

[Windows]MpJobsch: ERROR: 6104: The job net name is incorrect.

[Windows]MpJobsch: ERROR: 6105: The definition file has errors.

[Windows]MpJobsch: ERROR: 6107: The activation method is not specified.

[Windows]MpJobsch: ERROR: 6108: The holiday shift method is not specified.

[Windows]MpJobsch: ERROR: 6148: Job net information is not found.

[Windows]MpJobsch: ERROR: 6149: Failure to communicate among service processes.

[Windows]MpJobsch: ERROR: 6164: Systemwalker MpJobsch failed to send job net information.

[Windows]MpJobsch: ERROR: 6188: Failure to execute because the jobscheduler(client) is in use.

[Windows]MpJobsch: ERROR: 6204: Erroneous record found in calendar information.

[Windows]MpJobsch: ERROR: 6205: Erroneous record found in schedule pattern information.

[Windows]MpJobsch: ERROR: 6206: Systemwalker MpJobsch failed in the re-schedule.

[Windows]MpJobsch: ERROR: 6214: Systemwalker MpJobsch failed to read group information.

[Windows]MpJobsch: ERROR: 6219: Systemwalker MpJobsch failed to write group information.

[Windows]MpJobsch: ERROR: 6225: The job net is being saved or controlled.

[Windows]MpJobsch: ERROR: 6226: The group is being saved or controlled.

[Windows]MpJobsch: ERROR: 6228: The group is already found.

[Windows]MpJobsch: ERROR: 6229: The group is not found.

[Windows]MpJobsch: ERROR: 6231: The job net already exists in a group.

[Windows]MpJobsch: ERROR: 6232: The job net is not in a group.

[Windows]MpJobsch: ERROR: 6233: The job net is not being paused.

[Windows]MpJobsch: ERROR: 6234: The job net is already being paused.

[Windows]MpJobsch: ERROR: 6235: The job net is not being disabled.

[Windows]MpJobsch: ERROR: 6236: The job net is already being disabled.

[Windows]MpJobsch: ERROR: 6237: The group is already being executed or warned.

[Windows]MpJobsch: ERROR: 6239: The group is not aborted or ends abnormally or is coped and cannot be reactivated.

[Windows]MpJobsch: ERROR: 6240: The group is not being executed or warned.

[Windows]MpJobsch: ERROR: 6243: The group is not being ended abnormally.

[Windows]MpJobsch: ERROR: 6248: The job is not defined in the definition file.

[Windows]MpJobsch: ERROR: 6251: The group is same as the target group.

[Windows]MpJobsch: ERROR: 6252: The group includes the target job net.

[Windows]MpJobsch: ERROR: 6253: The job net is same as the target job net.

[Windows]MpJobsch: ERROR: 6256: The job net is not defined in the definition file.

[Windows]MpJobsch: ERROR: 6259: The group including the job net is being saved or controlled.

[Windows]MpJobsch: ERROR: 6260: The group including the job net is already being executed or warned.

[Windows]MpJobsch: ERROR: 6261: Invalid group information.

[Windows]MpJobsch: ERROR: 6271: The cope operation to the group is invalid.

[Windows]MpJobsch: ERROR: 6273: Systemwalker MpJobsch is being started.

[Windows]MpJobsch: ERROR: 6275: Project name is not specified.

[Windows]MpJobsch: ERROR: 6276: The LANG value is incorrect.

[Windows]MpJobsch: ERROR: 6278: Failure in conversion because the Systemwalker MpJobsch is being executed.

[Windows]MpJobsch: ERROR: 6283: The calendar name is not found.

[Windows]MpJobsch: ERROR: 6289: The job net does not end abnormally.

[Windows]MpJobsch: ERROR: 6290: The cope operation to the job net is invalid.

[Windows]MpJobsch: ERROR: 6291: The group is already being paused.

[Windows]MpJobsch: ERROR: 6292: The group is already being disabled.

[Windows]MpJobsch: ERROR: 6293: The group is not being paused.

[Windows]MpJobsch: ERROR: 6294: The group is not being disabled.

[Windows]MpJobsch: ERROR: 6298: Failure in communicating with the Systemwalker MpJmCal service.

[Windows]MpJobsch: ERROR: 6302: Write message failed at server (message queue).

[Windows]MpJobsch: ERROR: 6304: Failure in retrieving message queue handle.

[Windows]MpJobsch: ERROR: 6305: Write message failed at client (message queue).

[Windows]MpJobsch: ERROR: 6308: Cannot allocate enough message queue buffer.

[Windows]MpJobsch: ERROR: 6310: Systemwalker MpJobsch is not started.

[Windows]MpJobsch: ERROR: 6312: The message event name is not found.

[Windows]MpJobsch: ERROR: 6316: The message event name is longer than 114 bytes.

[Windows]MpJobsch: ERROR: 6319: Failure in communicating with the Systemwalker MpJobsch.

[Windows]MpJobsch: ERROR: 6323: The request failed because the execution procedure was busy.

[Windows]MpJobsch: ERROR: 6324: The job net is not found in execution queue.

[Windows]MpJobsch: ERROR: 6326: Systemwalker MpJobsch stopped and cannot be controlled.

[Windows]MpJobsch: ERROR: 6327: Systemwalker MpJobsch is being started.

[Windows]MpJobsch: ERROR: 6331: The specified file is not found.

[Windows]MpJobsch: ERROR: 6332: The directory path is not found.

[Windows]MpJobsch: ERROR: 6333: The job net start API function is unavailable.

[Windows]MpJobsch: ERROR: 6334: Systemwalker ACL Manager is not started.

[Windows]MpJobsch: ERROR: 6335: Invalid project name.

[Windows]MpJobsch: ERROR: 6336: Cannot delete because job net information exists.

[Windows]MpJobsch: ERROR: 6337: Invalid user name.

[Windows]MpJobsch: ERROR: 6338: Start date of temporary change has not been specified.

[Windows]MpJobsch: ERROR: 6339: Cannot delete SYSTEM CALENDAR.

[Windows]MpJobsch: ERROR: 6340: Interstage is not supported.

[Windows]MpJobsch: ERROR: 6345: User does not belong to permitting group.

[Windows]MpJobsch: ERROR: 6354: The job net is a child job net.

[Windows]MpJobsch: ERROR: 6360: Number of levels in job net exceeded the maximum limit.

[Windows]MpJobsch: ERROR: 6361: Levels in the job net loop.

[Windows]MpJobsch: ERROR: 6364: Job net does not have information on start up days and operation schedule.

[Windows]MpJobsch: ERROR: 6365: The jobscheduler failed to write parameter information file.

[Windows]MpJobsch: ERROR: 6366: The jobscheduler failed to read parameter information file.

[Windows]MpJobsch: ERROR: 6367: The parent job net does not copy.

[Windows]MpJobsch: ERROR: 6368: The job net is not being ended abnormally or forcedly.

[Windows]MpJobsch: ERROR: 6369: The group is not being ended abnormally or forcedly.

[Windows]MpJobsch: ERROR: 6370: End pointer is invalid.

[Windows]MpJobsch: ERROR: 6371: The jobscheduler failed to read end pointer.

[Windows]MpJobsch: ERROR: 6372: The jobscheduler failed to write end pointer.

[Windows]MpJobsch: ERROR: 6375: Specified regular expression is invalid.

[Windows]MpJobsch: ERROR: 6376: Latest rendez-vous time must be after the rendez-vous time.

[Windows]MpJobsch: ERROR: 6379: The jobscheduler failed to read a temporary file.

[Windows]MpJobsch: ERROR: 6380: The jobscheduler failed to write a temporary file.

[Windows]MpJobsch: ERROR: 6389: Cannot revoke the job net because it is not carried over.

[Windows]MpJobsch: ERROR: 6390: Cannot reinstate the job net because its activation method is not `Start Only When Message Event Has Occurred' or `Once in a day' is not specified.

[Windows]MpJobsch: ERROR: 6391: Cannot reinstate the job net because it is not executed today.

[Windows]MpJobsch: ERROR: 6392: Cannot reinstate the job net because it is being paused or disabled.

[Windows]MpJobsch: ERROR: 6395: The memo is too long.

[Windows]MpJobsch: ERROR: 6396: Detected an error in the memo.

[Windows]MpJobsch: ERROR: 6400: Cannot control the job.

[Windows]MpJobsch: ERROR: 6401: The job is not found.

[Windows]MpJobsch: ERROR: 6402: Two or more jobs with the same job name exist.

[Windows]MpJobsch: ERROR: 6403: The job is being controlled.

[Windows]MpJobsch: ERROR: 6404: The job is not being executed or delayed.

[Windows]MpJobsch: ERROR: 6405: The job cannot be reactivated, because the job net is not in the executing or warning state.

[Windows]MpJobsch: ERROR: 6406: The job cannot be reactivated, because it is not in an abnormally ended state or forced.

[Windows]MpJobsch: ERROR: 6407: The job is already in the executing or delaying state.

[Windows]MpJobsch: ERROR: 6408: The job is not being paused.

[Windows]MpJobsch: ERROR: 6409: The job is already suspended.

[Windows]MpJobsch: ERROR: 6410: The job is not being disabled.

[Windows]MpJobsch: ERROR: 6411: The job is already being disabled.

[Windows]MpJobsch: ERROR: 6413: The year is incorrect.

[Windows]MpJobsch: ERROR: 6414: Cannot control the job because the recovery job is currently running.

[Windows]MpJobsch: ERROR: 6415: Failure in access acquisition.

[Windows]MpJobsch: ERROR: 6416: The project is not found.

[Windows]MpJobsch: ERROR: 6421: Failed to access the schedule file. Refer to the manual and resolve the problem.

[Windows]MpJobsch: ERROR: 6436: Job nets that have been copied by copying and starting up cannot be operated.

[Windows]MpJobsch: ERROR: 6440: The specified job net cannot be started using variable parameters.

[Windows]MpJobsch: ERROR: 6441: The regular expression is too long.

[Windows]MpJobsch: ERROR: 6447: The job net is a linked job net, therefore the specified operation is not possible.

[Windows]MpJobsch: ERROR: 6448: The job net is a master linked job net, therefore the specified operation is not possible.

[Windows]MpJobsch: ERROR: 6449: The master linked job net job operation is not possible.

[Windows]MpJobsch: ERROR: 6453: The linked job net cannot be registered.

[Windows]MpJobsch: ERROR: 6457: The linked job net cannot be copied.

[Windows]MpJobsch: ERROR: 6458: The linked job net is executing or has warning status, therefore the specified operation is not possible.

[Windows] MpJobsch: ERROR: 6461: The linked job net is being saved or controlled, therefore the specified operation is not possible.

[Windows] MpJobsch: ERROR: 6462: The master linked job net is executing or has warning status, therefore the specified operation is not possible.

[Windows] MpJobsch: ERROR: 6463: The master linked job net is being saved or controlled, therefore the specified operation is not possible.

[Windows]MpJobsch: ERROR: 6518: Cannot register the job net if the length of the job net name or job net comment exceeds the limit, because the copy and startup setting for the top parent job net is enabled.

[Windows]MpJobsch: ERROR: 6519: Cannot register the job net as a linked job net if the length of the job net name or job net comment exceeds the limit, because the copy and startup setting for the top parent job net is enabled.

[Windows]MpJobsch: ERROR: 6520: Cannot copy the job net with the copy and startup setting enabled, because the length of the copy destination job net name exceeds the limit.

[Windows]MpJobsch: ERROR: 6521: Execute the command as a local job of the Jobscheduler.

[Windows]MpJobsch: ERROR: 6523: Failed to read the message event occurrence history file.

[Windows]MpJobsch: ERROR: 6524: Failed to write to the message event occurrence history file.

[Windows]MpJobsch: ERROR: 6529: Cannot copy the job net with the copy and startup setting enabled, because a termination processing job net name is specified as the copy destination.

[Windows]MpJobsch: ERROR: 6531: ERROR: Cannot restart the job, because it was canceled by the OR condition of the succeeding job.

[Windows]MpJobsch: ERROR: 7000: func=XXXX:YYYY() ZZZZ ZZZZ

[Windows]MpJobsch: ERROR: 7022: Erroneous record exists in job net information of XXXX.

[Windows]MpJobsch: ERROR: 7043: XXXX Systemwalker MpJobsch failed to read job net information file.

[Windows]MpJobsch: ERROR: 7044: XXXX Systemwalker MpJobsch failed to write job net information file.

[Windows]MpJobsch: ERROR: 7072: The keyword is incorrect. XXXX line.

[Windows]MpJobsch: ERROR: 7075: The control statement or control statement sequence is incorrect. XXXX line.

[Windows]MpJobsch: ERROR: 7083: The parameter is not found. XXXX line.

[Windows]MpJobsch: ERROR: 7084: The parameter is incorrect. XXXX line.

[Windows]MpJobsch: ERROR: 7085: Semicolon usage is incorrect. XXXX line.

[Windows]MpJobsch: ERROR: 7086: XXXX is incorrect.

[Windows]MpJobsch: ERROR: 7099: The number of parameters is incorrect. XXXX line.

[Windows]MpJobsch: ERROR: 7106: The control statement is inconsistent. XXXX line.

[Windows]MpJobsch: ERROR: 7110: The day field is not set. XXXX line.

[Windows]MpJobsch: ERROR: 7111: The operand is duplicated. XXXX line.

[Windows]MpJobsch: ERROR: 7112: The parameter is duplicated. XXXX line.

[Windows]MpJobsch: ERROR: 7114: The operand sequence is incorrect. XXXX line.

[Windows]MpJobsch: ERROR: 7152: XXXX The job net information is not found.

[Windows]MpJobsch: ERROR: 7175: XXXX project does not exist or access is denied. Reference job net is not added.

[Windows]MpJobsch: ERROR: 7176: Erroneous record found in message events information.(XXXX)

[Windows]MpJobsch: ERROR: 7179: Failure in XXXX backup.

[Windows]MpJobsch: ERROR: 7181: The file is invalid.

[Windows]MpJobsch: ERROR: 7182: XXXX project name is too long.

[Windows]MpJobsch: ERROR: 7191: XXXX cannot be executed.

[Windows]MpJobsch: ERROR: 7212: Systemwalker MpJobsch failed to read group information file(XXXX).

[Windows]MpJobsch: ERROR: 7215: XXXX Erroneous record found in group information.

[Windows]MpJobsch: ERROR: 7218: XXXX Systemwalker MpJobsch failed to write group information file.

[Windows]MpJobsch: ERROR: 7244: XXXX is already in a group.

[Windows]MpJobsch: ERROR: 7245: XXXX activation method is not single.

[Windows]MpJobsch: ERROR: 7246: XXXX message activation method is sequential.

[Windows]MpJobsch: ERROR: 7258: XXXX user name is too long

[Windows]MpJobsch: ERROR: 7263: XXXX The jobscheduler failed to read the message information file.

[Windows]MpJobsch: ERROR: 7278: Cannot be used because XXXX service is started.

[Windows]MpJobsch: ERROR: 7281: XXXX The job net information file already exists.

[Windows]MpJobsch: ERROR: 7300: func=XXXX:YYYY() CCCC:ZZZZ

[Windows]MpJobsch: ERROR: 7301: func=XXXX:YYYY() ZZZZ

[Windows]MpJobsch: ERROR: 7304: The date is not the execution date. XXXX line.

[Windows]MpJobsch: ERROR: 7310: The host name in the file is incorrect.(XXXX)

[Windows]MpJobsch: ERROR: 7311 The command failed to occur the message event.(hostname = XXXX)

[Windows]MpJobsch: ERROR: 7355: XXXX cannot add with the current startup type.

[Windows]MpJobsch: ERROR: 7356: XXXX (Child job net) does not exist.

[Windows]MpJobsch: ERROR: 7357: XXXX (Parent job net) does not exist.

[Windows]MpJobsch: ERROR: 7358: XXXX cannot add a child job net with current startup type.

[Windows]MpJobsch: ERROR: 7359: XXXX already has paernt job net.

[Windows]MpJobsch: ERROR: 7362: XXXX (Parent job net) does not have job execution control.

[Windows]MpJobsch: ERROR: 7363: XXXX (Child job net) does not have job execution control.

[Windows]MpJobsch: ERROR: 7373: XXXX The file is not a normal file.

[Windows]MpJobsch: ERROR: 7374: XXXX Access denied.

[Windows]MpJobsch: ERROR: 7377: XXXX The jobscheduler failed to read a file.

[Windows]MpJobsch: ERROR: 7378: XXXX The jobscheduler failed to write a file.

[Windows]MpJobsch: ERROR: 7387: Failed to obtain privilege information for the user. (XXXX)

[Windows]MpJobsch: ERROR: 7388: XXXX File not found.

[Windows]MpJobsch: ERROR: 7419: The command failed to occur the message event.(hostname = %1) The specified host is not a Windows server, or the server service is not running on the specified host.

[Windows]MpJobsch: ERROR: 7439: XXXX Failed to write variable parameter information.

[Windows]MpJobsch: ERROR: 7420: The command failed to occur the message event.(hostname = %1) Cannot write to the Event log on the specified host because it is full.

[Windows]MpJobsch: ERROR: 7450: XXXX (master linked job net) does not exist.

[Windows]MpJobsch: ERROR: 7451: XXXX The linked job net cannot be registered using the current execution condition.

[Windows]MpJobsch: ERROR: 7452: XXXX is not a job execution control attribute, therefore it cannot be registered as a linked job net.

[Windows]MpJobsch: ERROR: 7454: XXXX A job net already exists with the same name, therefore the linked job net cannot be registered.

[Windows]MpJobsch: ERROR: 7455: XXXX A job net already exists with the same name as the child job net of linked job net, therefore the linked job net cannot be registered.

[Windows]MpJobsch: ERROR: 7456: XXXX The length of the job net name for linked job net has exceeded the limit, therefore the linked job net cannot be registered.

[Windows]MpJobsch: ERROR: 7459: XXXX The limit for the number of registered linked job nets connected to the master linked job net was exceeded, therefore the linked job net cannot be registered.

[Windows] MpJobsch: ERROR: 7460: XXXX is a master linked job net, therefore it cannot be registered as a child job net.

[Windows] MpJobsch: ERROR: 7464: XXXX The job net name and linked job net name are the same, therefore the linked job net cannot be registered.

[Windows] MpJobsch: ERROR: 7465: XXXX There is a linked job net in the layer under the child job net, therefore it cannot be registered as a child job net. XXXX

[Windows]MpJobsch: ERROR: 7515: XXXX Cannot register as a child job net, because the copy and startup setting is enabled.

[Windows]MpJobsch: ERROR: 7516: XXXX Cannot register as a linked job net, because the copy and startup setting is enabled.

[Windows]MpJobsch: ERROR: 7517: XXXX Cannot register to the group, because the copy and startup setting is enabled.

[Windows]MpJobsch: ERROR: 7530: XXXX Cannot change the job net comment if the length exceeds the limit, because the copy and startup setting is enabled.

[Windows]MpJobsch: ERROR: 8303: Error (YYYY) has been detected in Systemwalker MpJmCal (API) while converting the calendar(XXXX).

[Windows]MpJobsch: ERROR: 8418:The command failed to occur the message event.(hostname = %1) Add the user name and password on the specified host to authenticate the user (%2) executing the command

Mpjobsch: ERROR: Usage: jobschprintcsv { -n [-toplevel] | -l yyyy mm |-g yyyy mm dd [-vparam] | -f 0 to 5 [-vparam]} [-title]

Mpjobsch: ERROR: Usage: jobschprintcsv { -n [-toplevel] | -l yyyy mm |-g yyyy mm dd [-vparam] | -f 0 to 5 [-vparam]} [-title] [-sys 0 to 9]

not find jobschprint

Unknown Host Name

Usage:jobschcsvtodef filename

Usage:jobschdeftocsv [-d] filename

Unable to write to the import execution result file.

The import process has completed.

There is no file to import.

The import function could not start.

The maximum number of CSV files that can be specified is 1,000.Only the first 1,000 files will be imported. Import the remaining files separately.

Any existing job nets will be overwritten. Do you want to continue?

An import process that was started from another Systemwalker Operation Manager client is currently executing.

The Cancel button was clicked, so processing terminated after xx items were completed out of yy items.

The file could not be imported because the file name is more than 256 bytes.

The CSV file could not be imported because the read process failed.

The specified CSV file could not be imported because of invalid contents for Systemwalker Operation Manager.

An internal file could not be generated during import processing.

Sending the CSV files to the server during import processing failed.

Registration of the CSV files during import processing failed.

Could not get import information because reading of the execution result file failed.

Command xxx terminated normally.

Command xxx terminated abnormally during import processing.

The import process terminated abnormally. (0xXXXXXXXX)

Export of data completed.

Failed to write to the execution result file used for exporting data.

The CSV file failed to be output during export processing.

Failed to create the project folder.

No export destination folder specified.

Specify the export destination folder using 200 bytes or less.

An export process that was started from another Systemwalker Operation Manager client is already being executed.

There are no groups or job nets that can be exported.

The Cancel button was clicked, so processing terminated after xx items were completed out of yy items.

Reading of internally generated files failed during export processing, so the CSV file could not be output. Processing was canceled after xx items were completed out of yy items.

Analysis of internally generated files failed during export processing.

The project name folder was created successfully.

Failed to create project name folder. As a result, processing was canceled after xx items were completed out of yy items.

An internal file could not be generated during export processing.

The request to send the CSV file to the server during export processing failed.

Failed to generate the CSV file during export processing.

Failed to receive the CSV file from the server.

Could not get export information because reading of the execution result file failed.

The export process has been completed successfully.

The export process terminated abnormally (0xXXXXXXXX)

-<opt chars> appears more than once in script file.

-<opt chars> appears more than once on command line.

-dp dispatch priority exceeds limit: x.

-dp dispatch priority is not a decimal digit string.

-dp dispatch priority less than minimum limit: x.

-jft should be specified with -rh.

-jo should be specified with -env.

-lt elapsed time limit exceeds limit: 99999999.

-lt elapsed time limit is not a decimal digit string.

-lt elapsed time limit too small.

-p priority exceeds limit: 63.

-p priority is not a decimal digit string.

-R option cannot specify the number of resources for the resource name not defined in the resource definition file.

-R option cannot specify two or more resources of the same name.

-R resource name must be ended with "sh" or "ex" after a "," character.

-r retrycount exceeds limit: 20.

-r retrycount is not a decimal digit string.

[Windows]-r retrycount too small.

<queuename> is invalid queue name.

<value> exceeds <max value> characters.

<value> value missing after -<opt chars> flag.

'=' character does not found in parameter.

A '-' was expected to precede the embedded default flag: <chars>.

An illegal value is set to the maxexec parameter. Specify the process multiplicity between 1 and X.

Any queues do not exist.

[Windows]A process tree cannot be displayed for the job <job-name(jobno.hostname)> because it has not been executed in trace mode.

[Windows]A process tree cannot be displayed for the job <job-name(jobno.hostname)> because it is a network job.

[Windows]A process tree cannot be displayed for the job <job-name(jobno.hostname)> because it is not executing.

A system error occurred. Detailed error code: <error code>

A timeout has occurred because the distributed execution control file is already in use by another process. Try again later.

Command line is too long.

Conflict between -<opt chars> and -<opt chars> flags.

Dispatch priority exceeds limit: x.

Dispatch priority is less than x.

Elapsed time limit exceeds limit: 99999999.

Elapsed time limit is less than 1.

Environment variable information is unacquirable from an environment variable setting file.

Error creating spooled version of script file.

Error occurred. function: <function-name> code: <code>

Failed to allocate memory.

Failed to load the audit log library.

Failed to read the audit log file.

Failed to read the distributed execution control file. If this problem persists, contact your administrator.

Host group does not exist.

Host group exceeds limit: 64

Host group <hostgroup> does not exist.

Insufficient privilege for -u specification.

Invalid argument flag: <opt chars>.

Invalid argument specified.

Invalid extension specified.

Invalid host-name specified.

Invalid job-no specified.

Invalid option flag specified.

Invalid parameter specified._Parameter: <specified-parameter>.

Invalid queuename: <queuename>.

Invalid remote sub-system number specified.

Invalid sub-system number specified.

Invalid value following -<opt chars> flag.

It doesn't end even if job name (jobname) lapses by end plan time (time).

JC_COMMENT variable exceeded allowance size.

Job <jobname(jobno.hostname)> does not exist.

Job <jobname(jobno.hostname)> has been canceled.

Job <jobname(jobno.hostname)> has been changed.

Job <jobname(jobno.hostname)> has been deleted.

Job <jobname(jobno.hostname)> has been held.

Job <jobname(jobno.hostname)> has been queued to queue <queuename>.

Job <jobname(jobno.hostname)> has been released.

Job <jobname(jobno.hostname)> is already held.

Job <jobname(jobno.hostname)> is held by the user belongs to Administrators group.

Job <jobname(jobno.hostname)> is held by the user belongs to privilege group.

Job <jobname(jobno.hostname)> is holding.

Job <jobname(jobno.hostname)> is not holding.

Job <jobname(jobno.hostname)> is running.

Job <jobname(jobno.hostname)> is running. And unable to hold.

Job <jobname(jobno.hostname)> moved to queue <queuename>.

Job <jobname(jobno.hostname)> submitted to queue: <queuename>.

Job <jobname(jobno.hostname)>(<username>'s) moved to queue <queuename>.

Job <jobname> is duplicate.

Job file pathname too long.

Job not queued.

Job-name is too long.

Local default has not been defined.

Max exec exceeds limit: x.

Max exec is less than 1.

Max job exceeds limit: 999.

Max job is less than 1.

[Windows]Message receive failure in inter-process communications with Systemwalker MpMjes service.

[Windows]Message send failure in inter-process communications with Systemwalker MpMjes service.

Missing dispatch priority.

Missing priority.

Missing username.

[UNIX]mjsdaemon is starting.

[UNIX]mjsdaemon is stopping.

[UNIX]mjsdaemon service is not running.

MJS815E CAN NOT FILE TRANSFER FROM hostname.BECAUSE DIRECTORY IS NOT EXIST : accessname

MJS819E USERNAME username REFUSED BY HOST(hostname),BECAUSE PERMISSION DENIED

[Windows]Failed to create a MpMjesN environment. Error code=code

[Windows]Failed to delete the MpMjesN environment. Error code=code

MSGM_USERNAME variable exceeded allowance size.

Multiple comment specified.

Multiple -cu specifications.

Multiple -d specifications.

Multiple -dp specifications.

Multiple job files specified.

Multiple -l specifications.

Multiple -p specifications.

Multiple -sys specifications.

Multiple -u specifications.

Multiple -x specifications.

Multiple -z specifications.

Neither -dp and -p not specified.

No extension specified.

No job specified.

No operand specified.

No parameter specified.

No queue specified.

No request queue specified, and no local default has been defined.

No such queue: <queuename>.

No such user on this machine.

[Windows]Not registered to swadmin group.

Now job isn't moved to any queues.

Over the job limit.

Over the MAX comment size.

Parameter ends with '=' character.

[Windows]Pipe open failure in inter-process communications with Systemwalker MpMjes service.

Priority exceeds limit: 63.

Priority is less than 0.

Queue <queuename> does not exist.

Queue <queuename> has been changed.

Queue <queuename> has been started.

Queue <queuename> has been stopped.

Queue <queuename> is already started.

Queue <queuename> is already stopped.

Queue information file does not exist.

Queue is inactive.

[UNIX]Request is rejected by mjsdaemon service.

[Windows]Request is rejected by Systemwalker MpMjes service.

Request timed out.

Specified parameter is not a decimal digit string.

[Windows]Not registered to swadmin group.

System error occurred. function: <function-name> code: <code>

[Windows]Systemwalker MpMjes service is not running.

[Windows]Systemwalker MpMjes service is starting.

[Windows]Systemwalker MpMjes service is stopping.

[Windows]The "Systemwalker MpMjesN" service has been started. Terminate the service and try again.

[Windows]Failed to delete the "Systemwalker MpMjesN" service. Error code=code

[Windows]Failed to obtain the status of the "MpMjesN" service. Error code=code

[Windows]Failed to register the "Systemwalker MpMjesN" service. Error code=code

The elapsed time limit for job exceeded the corresponding limits of the target queue: <queuename>

The environment of the sub-system number does not exist.

The execution request was rejected because a job specifying an execution destination subsystem number was submitted to the distributed execution queue.

[Windows]The execution request was rejected because a job specifying an execution destination subsystem number was submitted to the load distribution queue.

The JCL job was submitted to distributed execution queue so that the execution request was refused.

The job file is empty.

[Windows]The job is executing now, the stop request was rejected.

The job that isn't normal job was submitted to distributed execution queue, so that the execution request was refused.

The job which the request host was specified was submitted to distributed execution queue, so that the execution request was refused.

The jobname(jobno) cannot be moved to the distributed execution queue.

The jobname(jobno) which exists in the distributed execution queue cannot be moved.

The number of constitute hosts has reached the maximum. Remove one of the registered hosts first to add a new host.

The number of resources specified for -R option is too larger than that of the upper bound defined in the resource definition file.

There is only one constitute host. Add a new host to remove the current host.

The resource cannot be acquired.

The specified constitute host does not exist. Specify an existing constitute host.

The specified execution forecast time is larger than -lt elapse time limit.

The specified host group does not exist. Specify an existing host group.

The specified host group has more than one host with the same name. Specify a unique host name.

The specified host group name already exists. Specify a different host group name.

The timelimit specified with -ld is invalid.

The user <username> is not an administrator or a user who belongs to the swadmin group. Login as an administrator or a user who belongs to the swadmin group, and try again.

Too many jobs given to delete.

Unable to check user privilege.

Unable to create command line file.

Unable to create environment file.

Unable to create job directory.

Unable to create job information file.

Unable to create spooled script file.

Unable to determine current working directory.

Unable to determine hostname.

Unable to determine username.

Unable to find the job file specified.

Unable to get default queue name.

Unable to get environment variable MJ_INPUTFILES.

Unable to get environment variable MJ_OUTPUTFILES.

Unable to get hostname.

Unable to get job information.

Unable to get job number.

Unable to get local host-name.

Unable to get queue information.

Unable to get system information.

Unable to make jcl file.

Unable to read sysinfo.

Unable to open script file: <filename>.

Unable to open the queue information file.

Unable to read registry.

Unable to read the queue information file.

Unable to rename job directory.

Unable to store current working directory in environment file.

Unable to write environment variable to env. file.

Unable to write job information file.

Unknown reason.

User <username> does not belong to Administrators group.

User <username> does not belong to privilege group.

User <username> is not owner of job <jobname(jobno.hostname)>.

Warning: Invalid embedded default argument flag: <opt chars>._ Script file line <line number>.

Warning: -j job-name begins with a digit, which is illegal._An "J" has been pretended to the job name: <jobname>.

Warning: too many arguments._<line>_ Extra arguments ignored: <chars>.

You do not have administrator privileges. Error code=code

Command line is too long.

[Windows]Failed to open the Service Control Manager. Error code=code

[Windows]Invalid sub-system number specified.

[Windows]Invalid sub-system number specified.

[Windows]The timelimit specified with -ld is invalid.

Unable to move job to distributed execution queue.

[Windows]Failed to obtain the domain name. Error code=code

JCL job was submitted to distributed execution queue. Execution request was denied.

Job with specified request host was submitted to distributed execution queue. Execution request was denied.

Unable to move job from distributed execution queue.

[Windows]Cannot find the message code. Code=code

MJS101I Start process of WU-name(user-name) has started.

MJS102I WU-name has started.

MJS103I Received an end request of WU-name.

MJS104I End process of WU-name has started.

MJS105I WU-name has ended.

MJS106E Interstage is not installed on the system.

MJS107E Failure in start process of WU-name.

MJS108E Irrecoverable error occurred while monitoring status of WU-name.

MJS109E Irrecoverable error occurred during end process of WU-name.

MJS110E WU-name is terminated abnormally.

MJS111I Started the end process of monitoring WU_name.

MJS112I Stopped monitoring WU_name.

[UNIX]MJS704E Failed in starting job step <jobstep-name>. Job file not found.

MJS800I MJSRJOB JOB CONTROL START mm/dd.hh:mm:ss

MJS801I MJSRJOB JOB CONTROL STOP mm/dd.hh:mm:ss

MJS802I CONNECTED TO hostname

MJS803I DISCONNECTED TO hostname

MJS804I accessname {SENT|RECEIVED} nnnnn {KB|BYTES}

MJS805I JOB START ON hostname mm/dd.hh:mm:ss

MJS806I JOB STOP ON hostname mm/dd.hh:mm:ss CODE(nnnn)

MJS810E RECEIVE : accessname FILE NOT FOUND ON hostname

MJS810E RECEIVE : FILE NOT FOUND ON hostname : filename

MJS814E accessname : CAN NOT FILE TRANSFER FROM hostname.BECAUSE FILE IS DIRECTORY

MJS815E accessname : CAN NOT FILE TRANSFER FROM hostname.BECAUSE DIRECTORY IS NOT EXIST

MJS816E SEND : accessname : FILE NOT FOUND

MJS817E SEND : accessname : PERMISSION DENIED

MJS818E command COMMAND RETRY OVER

MJS819E USERNAME username REFUSED BY HOST(hostname),BECAUSE PERMISSION DENIED

MJS820E SYNTAX ERROR IN OPTIONS.

MJS821E SYNTAX ERROR IN command COMMAND

MJS822E HOST NAME IS NOT SPECIFIED

MJS825E CONNECT : INVALID HOST NAME hostname

MJS827E accessname ACCESS NAME NOT FOUND ON JCL

MJS828E command : ANOTHER SERVER WAS NOT CONNECTED

MJS830E BATCH JOB REQUEST PROCESS IS FAILED

MJS831E queue : INVALID QUEUE NAME

MJS832E MJSIN IS NOT SPECIFIED

MJS833E INSUFFICIENT STORAGE

MJS834E COMMAND STATEMENT IS NOTHING

MJS835E INVALID COMMAND NAME

MJS836E accessname : I/O ERROR OCCURRED,CODE(code)

MJS837E FIRST COMMAND STATEMENT MUST BE 'CONNECT'

MJS839E QUEUE queuename NOT DEFINED. AND, DEFAULT QUEUE IS NOT DEFINED

MJS840E OVER THE JOB LIMIT ON queuename

MJS841E SEND : accessname : FILE IS DIRECTORY

MJS842E RECEIVE : accessname : DIRECTORY IS NOT EXIST

MJS843E RECEIVE : accessname : PERMISION DENIED

MJS844E EXECUTE : jobfile : INVALID JOB FILE

MJS849W filename : CODE CONVERSION WAS NOT DONE.

MJS850E CONFIRMATION ERROR OF THE CONTINUOUS EXECUTION MODE OCCURRED

MJS851E NETWORK JOB RE-EXECUTION IS FAILED

MJS852E CONNECTION IS NOT PRODUCED TO LOWER RANK VERSION.

MJS853E jobname(jobno) which the request host was specified was submitted to distributed execution queue, so that the execution request was refused.

MJS854E The jobname(jobno) was canceled, because the job execution server is lower version.

MJS855E Users are restricted by the user control list for job execution.

MJS856E The mjsnetN port number is not specified for the subsystem number.

MJS861E OPEN ERROR OCCURRED,CODE(code)

MJS866E accessname : FILE ACCESS ERROR OCCURRED,CODE(code)

MJS868E accessname : DISK FULL ON hostname

MJS871E accessname : CAN NOT FILE TRANSFER TO hostname,BECAUSE DIRECTORY IS NOT EXIST

MJS874E accessname : CAN NOT FILE TRANSFER TO hostname,BECAUSE FILE IS DIRECTORY

MJS876E FILE TRANSFER ERROR OCCURRED,CODE(code)

MJS881S jobname(jobno) COMMUNICATION ERROR OCCURRED FOR hostname,CODE(code1,code2)

MJS882S Systemwalker MpMjes NOT ACTIVE ON hostname

MJS883S jobname(jobno) SYSTEM ERROR OCCURRED ON hostname,CODE(code)

MJS884S msgtext

MJS887S The execution server had gone down, so that the execution of the job was stopped.

-R resource name must be ended with "sh" or "ex" after a "," character.

Defined resource exceeds upper limit.

Error in sequence describing JCL control statement.line=<row>.

Exclusive operand specified.

Failure in retrieving printer data.

Insufficient space for storing jobstep structure. line=<row>.

Insufficient space for path name. line=<row>.

Insufficient space for file name. line=<row>.

Multiple definitions for same resource name.

No valid JCL control text.

prt parameter is not specified.

Queue <queuename> does not exist.

[Windows]Request is rejected by Systemwalker MpMjes service.

Request timed out.

Same jobstep name is already defined.

Specified printer no. exceeds the upper limit.

Specified printer not found.

The step name of skip operand is undefined. line=X.

Users are restricted by the user control list for job execution.

Value violating the rules cannot be specified in JCL operand. line=<row>.

Write-Open error in inline file.

System: An exception occurred while processing the job-name(jobno.hostname). Exception code: code. There may be a problem in the application or the system environment. Find out the cause of this exception. Refer to Systemwalker Operation Manager Troubleshooting Guide.

System: An exception occurred while processing the job-name(jobno.hostname). Application name: app-name. Exception code: code. There may be a problem in the application or the system environment. Find out the cause of this exception. Refer to Systemwalker Operation Manager Troubleshooting Guide.

System: An exception occurred while processing the jobstep jobstep. Application name: app-name. Exception code: code. There may be a problem in the application or the system environment. Find out the cause of this exception. Refer to Systemwalker Operation Manager Troubleshooting Guide.

System: An exception occurred while processing the jobstep jobstep. Exception code: code. There may be a problem in the application or the system environment. Find out the cause of this exception. Refer to Systemwalker Operation Manager Troubleshooting Guide.

Job Execution Control : Failed in starting job <jobname(jobno.hostname)> <reason>

Job Execution Control: The job job-name(jobno.hostname) has been cancelled by the user or due to stop of the Job Execution Control service. Exit code: 0x40000222

Job Execution Control: The job job-name(jobno.hostname) has been cancelled because its processing time exceeded the maximum. Exit code: 0x40000322

Job execution control:Failure in starting jobstep <jobstep-name>.<reason>

Job Execution Control: The jobstep jobstep has been cancelled by the user or due to stop of the Job Execution Control service. Exit code: 0x40000222

Job Execution Control: The jobstep jobstep has been cancelled because its processing time exceeded the maximum. Exit code: 0x40000322

[Windows]0x2404(YYY):Not enough disk space to continue the process.

[Windows]0x2405(YYY):Not enough memory to continue the process.

[Windows]0x2407(YYY):The Server Task Link Engine has started the termination process.

[Windows]0x240B(YYY):Not enough memory for the initialization process.

[Windows]0x240C(YYY):Failed to get the home directory name information.

[Windows]0x2413(YYY):Logging thread cannot be started.

[Windows]0x2416(YYY):The management file storage directory does not exist.

[Windows]0x2418(YYY):Failed to open the Server Task Job Link Engine registry key.

[Windows]0x2419(YYY):Initializing the schedule processing section.

[Windows]0x241B(YYY):Failed to create the temporary file.

[Windows]0x241C(YYY):Failed to get memory for log data.

[Windows]0x241D(YYY):Failed to get memory for log data buffer creation.

[Windows]0x2421(YYY):Failed to start pseudo interpreter manager thread.

[Windows]0x2429(YYY):Failed to open the temporary file.

[Windows]0x242A(YYY):Failed to write the temporary file.

[Windows]0x242B(YYY):Failed to read the temporary file.

[Windows]0x242F(YYY):Failed to open the specified file.

[Windows]0x2430(YYY):Failed to write the specified file.

[Windows]0x2431(YYY):Failed to read the specified file.

[Windows]0x2433(YYY):Failed to load F3csjmsc.dll in the schedule process section.

[Windows]0x2602(YYY):Memory is not enough.

[Windows]0x2604(YYY):The schedule process was forced to abort.

[Windows]0x2870(YYY):Failed to wait for the control path establishment request in the Task Link Connection Thread.

[Windows]0x2871(YYY):The control path management heap is exhausted in the Task Link Connection Thread.

[Windows]0x2872(YYY):Failed to confirm receiving the control path establishment request in the Task Link Connection Thread.

[Windows]0x2873(YYY):Unexpected event occurred in the control path establishment reception socket in the Task Link Connection Thread.

[Windows]0x2874(YYY):Failed to receive the control path connection establishment request in the Task Link Connection Thread.

[Windows]0x2875(YYY):Failed to create the Task Link Service Thread in the Task Link Connection Thread.

[Windows]0x2876(YYY):Failed to start the Task Link Service Thread in the Task Link Connection Thread.

[Windows]0x2880(YYY):The control path management heap is exhausted in the Task Link Service Thread.

[Windows]0x2881(YYY):Abnormal event occurred in the control path reception socket in the Task Link Service Thread.

[Windows]0x2882(YYY):Unexpected event occurred in the control path reception socket in the Task Link Service Thread.

[Windows]0x2883(YYY):Failed to receive the request data in the Task Link Service Thread.

[Windows]0x2884(YYY):A request data for an invalid length was received in the Task Link Service Thread.

[Windows]0x2885(YYY):A request data for an unsupported version was received in the Task Link Service Thread.

[Windows]0x2886(YYY):A request data for an unsupported level was received in the Task Link Service Thread.

[Windows]0x28A0(YYY):Failed to get memory for event information from the local heap.

[Windows]0x28B0(YYY):Failed to get socket( SOCK_STREAM ).

[Windows]0x28B1(YYY):Failed to free socket( SOCK_STREAM ).

[Windows]0x28B2(YYY):Failed to create heap.

[Windows]0x28B6(YYY):Failed to free the handle for file search.

[Windows]0x28B7(YYY):Failed to free the handle for file creation.

[Windows]0x28B8(YYY):Failed to get memory from the local heap.

[Windows]0x28B9(YYY):Failed to free memory to local heap.

[Windows]0x28BB(YYY):Failed to get memory for error message use in the communication control section.

[Windows]0x292F(YYY):Request data for an unsupported function was received.

[Windows]0x2930(YYY):Request data for an unsupported version was received.

[Windows]0x2931(YYY):Request data for an unsupported level was received.

[Windows]0x2932(YYY):Invalid request data was received.

[Windows]0x2933(YYY):A request data for an invalid length was received.

[Windows]0x2947(YYY):The specified user name is invalid.

[Windows]0x2951(YYY):The specified path is not found.

[Windows]0x2952(YYY):The specified file is not found.

[Windows]0x2955(YYY):The specified directory is not found.

[Windows]0x2956(YYY):The specified directory already exists.

[Windows]0x2957(YYY):The specified file already exists.

[Windows]0x2958(YYY):The file specified by the path does not exist.

[Windows]0x295B(YYY):The directory specified by the path does not exist.

[Windows]0x2962(YYY):Failed to get the specified first volume information.

[Windows]0x2963(YYY):Failed to get the specified second volume information.

[Windows]0x2965(YYY):Failed to read the specified first file.

[Windows]0x2966(YYY):Failed to read the specified second file.

[Windows]0x296A(YYY):Failed to search the specified path.

[Windows]0x2974(YYY):Failed to connect to the shared directory.

[Windows]0x2976(YYY):Failed to transfer file.

[Windows]0x297F(YYY):Failed to delete file.

[Windows]0x2980(YYY):Failed to rename file.

[Windows]0x2983(YYY):Failed to create directory.

[Windows]0x2984(YYY):Failed to delete directory.

[Windows]0x298A(YYY):Failed to start the server application.

[Windows]0x2997(YYY): The heap for creating file table is not enough.

[Windows]0x29A2(YYY):Failed to open the first file.

[Windows]0x29A3(YYY):Failed to open the second file.

[Windows]0x29A4(YYY):Failed to write to the second file.

[Windows]0x29B4(YYY):Failed to load F3csjrcX.dll.

[Windows]0x29B5(YYY):Failed to unload F3csjrcX.dll.

[Windows]0x29CD(YYY):Failed to logon.

[Windows]0x29D0(YYY):Failed to connect to the Internet.

[Windows]0x29D1(YYY):Failed to login to the FTP server.

[Windows]0x29D4(YYY):Failed to create directory on FTP server.

[Windows]0x29D5(YYY):Failed to delete directory on FTP server.

[Windows]0x29D6(YYY):Failed to delete file on FTP server.

[Windows]0x29D7(YYY):Failed to put file into the FTP server.

[Windows]0x29D8(YYY):Failed to get file from the FTP server.

[Windows]0x29F0(YYY):The termination process of the communication controller section has started.

[Windows]0x29F1(YYY):The schedule process was forced to stop in the communication controller section.

[Windows]0x2E05(YYY):Memory is not enough.

0x2E05(YYY):Memory is not enough.

0x2E10(YYY):Failed to create temporary file.

0x2E12(YYY):Failed to read temporary file.

0x2E13(YYY):Failed to write temporary file.

0x2E21(YYY):Failed to open the file to be compressed.

[Windows]0x2E22(YYY):Cannot get the information on the file to be compressed.

0x2E22(YYY):Cannot get the information on the file to be compressed.

0x2E31(YYY):Failed to open the compression destination file.

0x2E33(YYY):Failed to write the compression destination file.

0x2E34(YYY):Failed to operate the compression destination file.

0x2E41(YYY):Failed to open the file to be expanded.

0x2E50(YYY):Failed to read the file to be expanded.

[Windows]0x2E51(YYY):Failed to operate the file to be expanded.

0x2E51(YYY):Failed to operate the file to be expanded.

0x2E52(YYY):The format of the file to be expanded is invalid.

0x2E53(YYY):The file to be expanded has been damaged.

0x2E54(YYY):Failed to open the expansion destination file.

0x2E60(YYY):Failed to write the expansion destination file.

0x2E61(YYY):Failed to operate the expansion destination file.

[Windows]0x4101(YYY):The Link Library schedule process was forced to stop.

0x4101(YYY):The Link Library schedule process was forced to stop.

[Windows]0x4102(YYY):Failed to start the communication process in the Link Library.

0x4102(YYY):Failed to start the communication process in the Link Library.

[Windows]0x4103(YYY):Failed to get the local host name in the Link Library.

0x4103(YYY):Failed to get local host name in the Link Library.

[Windows]0x4104(YYY):Failed to create the heap in the Link Library.

[Windows]0x4104(YYY):Failed to create the heap in the Link Library.

[Windows]0x4105(YYY):Failed to open registry in the Link Library.

[Windows]0x4105(YYY):Failed to open the registry in the Link Library.

[Windows]0x410C(YYY):Failed to get the socket in the Link Library.

[Windows]0x410C(YYY):Failed to get the socket in the Link Library.

[UNIX]0x410C(YYY):Failed to get the socket in the Link Library.

[Windows]0x410E(YYY):Failed in the control path connection with the Server Task Link Engine in the Link Library.

0x410E(YYY):Failed in the control path connection with the Task Link Engine in the Link Library.

[Windows]0x410F(YYY):The connection is terminated from the Server Task Link Engine in the Link Library.

[UNIX]0x410F(YYY):The connection is terminated from the Task Link Engine in the Link Library.

[Windows]0x4110(YYY):Failed to confirm sending of the request data to Server Task Link Engine in the Link Library.

[Windows]0x4110(YYY):Failed to confirm sending of the request data to Server Task Link Engine in the Link Library.

[UNIX]0x4110(YYY):Failed to confirm sending of the request data to Task Link Engine in the Link Library.

[Windows]0x4111(YYY):Unexpected event occurred while sending the request data to the Server Task Link Engine in the Link Library.

[Windows]0x4111(YYY):Unexpected event occurred while sending the request data to the Server Task Link Engine in the Link Library.

[UNIX]0x4111(YYY):Unexpected event occurred while sending the request data to the Task Link Engine in the Link Library.

[Windows]0x4112(YYY):Timeout occurred while sending the request data to the Server Task Link Engine in the Link Library.

[Windows]0x4112(YYY):Timeout occurred while sending the request data to the Server Task Link Engine in the Link Library.

[UNIX]0x4112(YYY):Timeout occurred while sending the request data to the Task Link Engine in the Link Library.

[Windows]0x4113(YYY):Failed to send the request data to the Server Task Link Engine in the Link Library.

[Windows]0x4113(YYY):Failed to send request data to Server task Link Engine in the Link Library.

[UNIX]0x4113(YYY):Failed to send the request data to the Task Link Engine in the Link Library.

[Windows]0x4114(YYY):Failed to confirm receiving the response data from the Server Task Link Engine in the Link Library.

[Windows]0x4114(YYY):Failed to confirm receiving the response data from the Server Task Link Engine in the Link Library.

[UNIX]0x4114(YYY):Failed to confirm receiving the response data from the Task Link Engine in the Link Library.

[Windows]0x4115(YYY):Unexpected event occurred while receiving the response data from the Server Task Link Engine in the Link Library.

[Windows]0x4115(YYY):Unexpected event occurred while receiving the response data from the Server Task Link Engine in the Link Library.

[UNIX]0x4115(YYY):Unexpected event occurred while receiving the response data from the Task Link Engine in the Link Library.

[Windows]0x4116(YYY):Timeout occurred while receiving the response data from the Server Task Link Engine in the Link Library.

[Windows]0x4116(YYY):Timeout occurred while receiving the response data from the Server Task Link Engine in the Link Library.

[UNIX]0x4116(YYY):Timeout occurred while receiving the response data from the Task Link Engine in the Link Library.

[Windows]0x4117(YYY):Failed to receive the response data from the Server Task Link Engine in the Link Library.

[Windows]0x4117(YYY):Failed to receive the response data from the Server Task Link Engine in the Link Library.

[UNIX]0x4117(YYY):Failed to receive the response data from the Task Link Engine in the Link Library.

[Windows]0x411A(YYY):Local heap for server connection is exhausted.

[Windows]0x411A(YYY):Local heap for server connection is exhausted.

[UNIX]0x411A(YYY):Memory is not enough in the Link Library.

[Windows]0x411B(YYY):Failed to open the Server Task Link Engine registry key in the Link Library.

[Windows]0x411B(YYY):Failed to open the Server Task Link Engine registry key in the Link Library.

[Windows]0x411C(YYY):Failed to read the Server Task Link Engine registry key in the Link Library.

[Windows]0x411C(YYY):Failed to read the Server Task Link Engine registry key in the Link Library.

[Windows]0x4120(YYY):Failed to get the storage area for log information.

[Windows]0x4120(YYY):Failed to get the storage area for log information.

[UNIX]0x4120(YYY):Failed to get the storage area for log information.

[Windows]0x421F(YYY):Processing is stopped due to a interrupt request.

0x421F(YYY):Processing is stopped due to a interrupt request.

[Windows]0x5201(YYY):Illegal parameter was specified in RAS connection.

[Windows]0x5203(YYY):Unsupported option was specified in RAS connection.

[Windows]0x5204(YYY):Local heap for RAS connection is exhausted.

[Windows]0x5206(YYY):Failed to load [RASAPI32.DLL] in RAS connection.

[Windows]0x5207(YYY):Failed to unload [RASAPI32.DLL] in RAS connection.

[Windows]0x5209(YYY):Failed to establish RAS connection.

[Windows]0x520A(YYY):Failed to disconnect RAS connection.

[Windows]0x520B(YYY):Failed to get the RAS connection information.

[Windows]0x520C(YYY):No valid RAS connections.

[Windows]0x520D(YYY):The requested RAS connection is not found.

0xA404(YYY):Not enough disk space to continue the process.

0xA405(YYY):Not enough memory to continue the process.

[Windows]0xA407(YYY):The termination process of the Client Task Link engine has started.

[UNIX]0xA407(YYY):The termination process of the Client Task Link engine has started.

[Windows]0xA40B(YYY):Not enough memory for the initialization.

0xA40C(YYY):Cannot get the home directory information.

0xA413(YYY):Logging thread cannot be started.

0xA416(YYY):The storage directory of the manager file does not exist.

[Windows]0xA418(YYY):Failed to open the Client Task Link engine registry key.

[UNIX]0xA418(YYY):Failed to open the Client Task Link engine registry key.

0xA419(YYY):The schedule process section is initializing.

0xA41C(YYY):Failed to get memory for log data creation.

0xA41D(YYY):Failed to get memory for log data buffer creation.

0xA421(YYY):Failed to start pseudo interpreter manager thread.

0xA429(YYY):Failed to open the temporary file.

0xA42A(YYY):Failed to write to the temporary file.

0xA42B(YYY):Failed to read the temporary file.

0xA42F(YYY):Failed to open the specified file.

0xA430(YYY):Failed to write to the specified file.

0xA431(YYY):Failed to read the specified file.

0xA604(YYY):The schedule process was forced to stop.

0xA870(YYY):Failed to wait for the control path establishment request in the Task Link Connection Thread.

0xA871(YYY):The heap for control path management is exhausted in the Task Link Connection Thread.

0xA872(YYY):Failed to confirm receiving the control path establishment request in the Task Link Connection Thread.

[Windows]0xA873(YYY):Exception event occurred in the socket for control path establishment in the Task Link Connection Thread.

[UNIX]0xA873(YYY):Exception event occurred in the socket for control path establishment in the Task Link Connection Thread.

[Windows]0xA874(YYY):Failed to receive the control path establishment request in the Task Link Connection Thread.

[UNIX]0xA874(YYY):Failed to receive the control path establishment request in the Task Link Connection Thread.

[Windows]0xA875(YYY):Failed to create the Task Link Service Thread in the Task Link Connection Thread.

[UNIX]0xA875(YYY):Failed to create the Task Link Service Thread in the Task Link Connection Thread.

[Windows]0xA876(YYY):Failed to start the Task Link Service Thread in the Task Link Connection Thread.

[UNIX]0xA876(YYY):Failed to start the Task Link Service Thread in the Task Link Connection Thread.

[Windows]0xA880(YYY):The heap for control path management is exhausted in the Task Link Service Thread.

[UNIX]0xA880(YYY):The heap for control path management is exhausted in the Task Link Service Thread.

[Windows]0xA881(YYY):Abnormal event occurred in the control path receiving socket in the Task Link Service Thread.

[UNIX]0xA881(YYY):Abnormal event occurred in the control path receiving socket in the Task Link Service Thread.

[Windows]0xA882(YYY):Exception event occurred in the control path socket in the Task Link Service Thread.

[UNIX]0xA882(YYY):Exception event occurred in the control path socket in the Task Link Service Thread.

[Windows]0xA883(YYY):Failed to receive the request data in the Task Link Service Thread.

[UNIX]0xA883(YYY):Failed to receive the request data in the Task Link Service Thread.

[Windows]0xA884(YYY):A request data of invalid length was received in the Task Link Service Thread.

[UNIX]0xA884(YYY):A request data of invalid length was received in the Task Link Service Thread.

[Windows]0xA885(YYY):A request data for an unsupported version was received in the Task Link Service Thread.

[UNIX]0xA885(YYY):A request data for an unsupported version was received in the Task Link Service Thread.

[Windows]0xA886(YYY):A request data for an unsupported level was received in the Task Link Service Thread.

[UNIX]0xA886(YYY):A request data for an unsupported level was received in the Task Link Service Thread.

0xA8A0(YYY):Memory for event information cannot be obtained from the local heap.

0xA8B0(YYY):Failed to get socket( SOCK_STREAM )

0xA8B1(YYY):Failed to release socket( SOCK_STREAM ).

0xA8B2(YYY):Failed to create the heap.

0xA8B6(YYY):Failed to release the handle for file search.

0xA8B7(YYY):Failed to release the handle for file creation.

0xA8B8(YYY):Failed to get memory from local heap.

0xA8B9(YYY):Failed to release memeory to local heap.

0xA8BB(YYY):Failed to get the memory for error message use in the communication control section.

0xA92F(YYY):A request data for an unsupported function was received.

0xA930(YYY):A request data for an unsupported version was received.

0xA931(YYY):A request data for an unsupported level was received.

0xA932(YYY):An invalid request data was received.

0xA933(YYY):A request data of invalid length was received.

0xA947(YYY):The specified user name is invalid.

0xA951(YYY):The specified path is not found.

0xA952(YYY):The specified file is not found.

0xA955(YYY):The specified directory is not found.

0xA956(YYY):The specified directory already exists.

0xA957(YYY):The specified file already exists.

0xA958(YYY):The file under the specified path does not exist.

0xA95B(YYY):The directory under the specified path does not exist.

0xA962(YYY):Failed to get the information on the specified first volume.

0xA963(YYY):Failed to get the information on the specified second volume.

0xA965(YYY):Failed to read the specified first file.

0xA966(YYY):Failed to read the specified second file.

0xA96A(YYY):Failed to search the specified path.

0xA974(YYY):Failed to connect to the shared directory.

0xA976(YYY):Failed to transfer file.

0xA97F(YYY):Failed to delete file.

0xA980(YYY):Failed to rename file.

0xA983(YYY):Failed to create directory.

0xA984(YYY):Failed to delete directory.

0xA98A(YYY):Failed to start application.

0xA98B(YYY):The waiting timeout has already exceeded.

0xA98F(YYY):Wait for event notification was timeout.

[Windows]0xa997 (YYY): The heap for creating file table is not enough.

0xA99B(YYY):The computer cannot be found.

0xA9A2(YYY):Failed to open the first file.

0xA9A3(YYY):Failed to open the second file.

0xA9A4(YYY):Failed to write to the second file.

0xA9D0(YYY):Failed to connect to the Internet.

0xA9D1(YYY):Failed to login to the FTP server.

0xA9D4(YYY):Failed to create directory on FTP server.

0xA9D5(YYY):Failed to delete directory on FTP server.

0xA9D6(YYY):Failed to delete file on FTP server.

0xA9D7(YYY):Failed to send file on FTP server.

0xA9D8(YYY):Failed to get file from FTP server.

0xA9DB(YYY):Not authorized to shutdown.

0xA9DC(YYY):Failed to shut down.

0xA9F0(YYY):The termination process of the communication controller section was started.

0xA9F1(YYY):The schedule process was forced to stop in the communication controller section.

0xA9F4(YYY):Failed to get the relative feasible file name.

0xA9E8 (YYY): Failed to get information needed to verify login information.

[Windows]0xB001:The command parameter is already in use.

[Windows]0xB001:The source path name was not specified correctly.

[Windows]0xB002:The command parameter is insufficient.

[Windows]0xB002:The destination path name was not specified correctly.

[Windows]0xB003:Invalid value was specified in the RC options.

[Windows]0xB003:The host name was not specified.

[Windows]0xB004:Invalid value was specified in the RI options.

[Windows]0xB004:Failed to get the destination user password.

[Windows]0xB005:Failed to create thread.

[Windows]0xB005:Failed to get the source user password.

[Windows]0xB006:The command parameter is insufficient.

[Windows]0xB006:Interrupted due to a message notification.

[Windows]0xB007:The command parameter is already in use.

[Windows]0xB007:The Task Link Engine process startup request was not accepted.

[Windows]0xB008:Invalid value was specified in the RC options.

[Windows]0xB009:Invalid value was specified in the RI options.

[Windows]0xB009:Failed to get the user password.

[Windows]0xB00A:Either the RC options or the RI options was not specified.

[Windows]0xB00B:The A options and B options were specified simultaneously.

[Windows]0xB00B:The P options and E options were specified simultaneously.

[Windows]0xB00C:Failed to create thread.

[Windows]0xB00C:The operation content was not specified.

[Windows]0xB00D:The path name was not specified.

[Windows]0xB00D:Interrupted due to a message notification.

[Windows]0xB00E:The rename file name was not specified.

[Windows]0xB00E:FTP server was specified in both source and destination.

[Windows]0xB00F:The path name specification is incorrect.

[Windows]0xB00F:The Task Link Engine process startup request was not accepted.

[Windows]0xB00F:The Task Link Engine process startup request was not accepted.

[Windows]0xB00F:The Task Link Engine process startup request was not accepted.

[Windows]0xB010:P options and E options must be specified.

[Windows]0xB010:The definition name of login and user name was not specified.

[Windows]0xB010:Invalid parameter was specified.

[Windows]0xB011:The source user name was not specified.

[Windows]0xB011:Invalid parameter was specified.

[Windows]0xB012:The host name was not specified.

[Windows]0xB012:The destination user name was not specified.

[Windows]0xB013:The login definition name was not specified.

[Windows]0xB015:The host name was not specified.

[Windows]0xB015:The host name was not specified correctly.

[Windows]0xB015:The user name was not specified correctly.

[Windows]0xB015:The destination user name was not specified correctly.

[Windows]0xB016:The host name was not specified correctly.

[Windows]0xB016:The rename file name was not specified correctly.

[Windows]0xB016:The source user name was not specified correctly.

[Windows]0xB016:The source user name was not specified correctly.

[Windows]0xB017:The file name to rename was not specified correctly.

[Windows]0xB017:The login definition name was not specified correctly.

[Windows]0xB017:The destination user name was not specified correctly.

[Windows]0xB018:/A,/B options are invalid except for FTP transfer.

[Windows]0xB018:The host name was not specified correctly.

[Windows]0xB019:The login definition name was not specified correctly.

[Windows]0xB01A:/A,/B options are invalid except for FTP transfer.

[UNIX]0xB105(YYY):Memory is not enough.

[UNIX]0xB106(YYY):Failed to create the temporary file.

[UNIX]0xB107(YYY):Failed to operate the temporary file.

[UNIX]0xB108(YYY):Failed to read temporary file.

[UNIX]0xB109(YYY):Failed to write temporary file.

[UNIX]0xB111(YYY):Failed to open the compression source file.

[UNIX]0xB112(YYY):Cannot get the information on the file to be compressed.

[UNIX]0xB115(YYY):Failed to open the compression destination file.

[UNIX]0xB117(YYY):Failed to write the compression destination file.

[UNIX]0xB118(YYY):Failed to operate the compression destination file.

[UNIX]0xB120(YYY):Failed to open the expansion source file.

[UNIX]0xB121(YYY):Failed to read the expansion source file.

[UNIX]0xB122(YYY):Failed to operate the expansion source file.

[UNIX]0xB123(YYY):The format of the file to be expanded is incorrect.

[UNIX]0xB124(YYY):The file to be expanded has been damaged.

[UNIX]0xB125(YYY):Failed to open the expansion destination file.

[UNIX]0xB126(YYY):Failed to read the expansion destination file.

[UNIX]0xB127(YYY):Failed to write the expansion destination file.

[UNIX]0xB128(YYY):Failed to operate the expansion destination file.

[UNIX]0xB501(YYY):The source path name was not specified correctly.

[UNIX]0xB502(YYY):The destination path name was not specified correctly.

[UNIX]0xB503(YYY):Failed to get the destination user password.

[UNIX]0xB504(YYY):Failed to get the source user password.

[UNIX]0xB505(YYY):The command parameter is insufficient.

[UNIX]0xB506(YYY):The command parameter is already in use.

[UNIX]0xB507(YYY):Invalid value was specified in the rc options.

[UNIX]0xB508(YYY):Invalid value was specified in the ri options.

[UNIX]0xB509(YYY):Either the rc options or ri options was not specified.

[UNIX]0xB50A(YYY):The a options and b options were specified simultaneously.

[UNIX]0xB50B(YYY):Processing is cancelled due to a interrupt request.

[UNIX]0xB50C(YYY):FTP server was specified as both the delivery source and delivery destination.

[UNIX]0xB50D(YYY):Invalid parameter was specified.

[UNIX]0xB50E(YYY):The source user name was not specified.

[UNIX]0xB50F(YYY):The destination user name was not specified.

[UNIX]0xB510(YYY):The login definition name was not specified.

[UNIX]0xB511(YYY):The destination user name was not specified correctly.

[UNIX]0xB512(YYY):The source user name was not specified correctly.

[UNIX]0xB513(YYY):The login definition name was not specified correctly.

[UNIX]0xB514(YYY):/a,/b options are invalid except for FTP transfer.

[UNIX]0xB521(YYY):Failed to login to the FTP server.

[UNIX]0xB522(YYY):Failed to get file.

[UNIX]0xB523(YYY):Failed to put file.

[UNIX]0xB528(YYY):Failed to search file to the FTP server.

[UNIX]0xB529(YYY):Failed to create file list to the FTP server.

[UNIX]0xB52A(YYY):Failed to copy file.

[UNIX]0xB52B(YYY):The source file is not found.

[UNIX]0xB52C(YYY):Memory is not enough.

[UNIX]0xB52D(YYY):Failed to create local file.

[UNIX]0xB52E(YYY):Failed to read local file.

[UNIX]0xB52F(YYY):Failed to access source path.

[UNIX]0xB530(YYY):Failed to access destination path.

[UNIX]0xB531(YYY):Processing is cancelled due to a interrupt request.

[UNIX]0xB601(YYY):The command parameter is already in use.

[UNIX]0xB602(YYY):The command parameter is insufficient.

[UNIX]0xB603(YYY):Invalid value was specified in the rc options.

[UNIX]0xB604(YYY):Invalid value was specified in the ri options.

[UNIX]0xB605(YYY):Processing is cancelled due to a interrupt request.

[UNIX]0xB606(YYY):Failed to get the user password.

[UNIX]0xB607(YYY):Either the rc options or the ri options was not specified.

[UNIX]0xB608(YYY):The operation content was not specified.

[UNIX]0xB609(YYY):The path name was not specified.

[UNIX]0xB60A(YYY):The rename file name was not specified.

[UNIX]0xB60B(YYY):The path name specification is incorrect.

[UNIX]0xB60C(YYY):The definition name of login and user name was not specified.

[UNIX]0xB60D(YYY):Invalid parameter was specified.

[UNIX]0xB60F(YYY):The user name was not specified correctly.

[UNIX]0xB610(YYY):The rename file name was not specified correctly.

[UNIX]0xB611(YYY):The destination user name was not specified correctly.

[UNIX]0xB621(YYY):Failed to login to the FTP server.

[UNIX]0xB624(YYY):Failed to rename file.

[UNIX]0xB625(YYY):Failed to delete file.

[UNIX]0xB626(YYY):Failed to create directory.

[UNIX]0xB627(YYY):Failed to delete directory.

[UNIX]0xB628(YYY):Failed to search file to the FTP server.

[UNIX]0xB629(YYY):Failed to create file list to the FTP server.

[UNIX]0xB62B(YYY):The specified file or directory is not found.

[UNIX]0xB62C(YYY):Memory is not enough.

[UNIX]0xB631(YYY):Processing is cancelled due to a interrupt request.

[UNIX]0xC210(YYY):Processing is stopped due to a user operation.

[UNIX]0xC220(YYY):The parameter is already in use.

[UNIX]0xC221(YYY):The parameter is insufficient.

[UNIX]0xC222(YYY):Invalid value was specified in the rc options.

[UNIX]0xC223(YYY):Invalid value was specified in the ri options.

[UNIX]0xC224(YYY):Either the rc options or the ri options was not specified.

[UNIX]0xC225(YYY):p options and e options must be specified.

[UNIX]0xC226(YYY):The p options and e options were specified simultaneously.

[UNIX]0xC227(YYY):Invalid parameter was specified.

[UNIX]0xC230(YYY):The capacity of the disk which was able to be used was exceeded.

[UNIX]0xC240(YYY):Cannot create the file.

[UNIX]0xC241(YYY):Cannot read the file.

[UNIX]0xC250(YYY):Cannot access the directory.

[UNIX]0xC260(YYY):Memory is not enough.

[UNIX]0xC270(YYY):Failed to compress file.

[UNIX]0xC280(YYY):Failed to expand file.

[UNIX]0xC290(YYY):Interrupted due to a message notification.

[UNIX]0xC310:Interrupted due to a message notification.

[UNIX]0xC320:The command parameter is already in use.

[UNIX]0xC321:The command parameter is insufficient.

[UNIX]0xC322:Invalid value was specified in the rc options.

[UNIX]0xC323:Invalid value was specified in the ri options.

[UNIX]0xC324:Either the rc options or the ri options was not specified.

[UNIX]0xC326:Invalid parameter was specified.

[UNIX]0xC327:The host name was not specified.

[UNIX]0xC329:The a options and b options were specified simultaneously.

[UNIX]0xC330:The source path name was not specified correctly.

[UNIX]0xC331:The destination path name was not specified correctly.

[UNIX]0xC332:The login definition name was not specified.

[UNIX]0xC333:The host name was not specified correctly.

[UNIX]0xC334:The source path name was not specified correctly.

[UNIX]0xC335:The destination path name was not specified correctly.

[UNIX]0xC336:The source user name was not specified.

[UNIX]0xC337:The destination user name was not specified.

[UNIX]0xC338:The login definition name was not specified correctly.

[UNIX]0xC340:The Task Link Engine process startup request was not accepted.

[UNIX]0xC350:Failed to get the source user password.

[UNIX]0xC351:The source user name was not specified correctly.

[UNIX]0xC352:Failed to get the destination user password.

[UNIX]0xC353:The destination user name was not specified correctly.

[UNIX]0xC390:FTP server was specified in both source and destination.

[UNIX]0xC391:/a,/b options are invalid except for FTP transfer.

[UNIX]0xC401:The command parameter is already in use.

[UNIX]0xC402:The command parameter is insufficient.

[UNIX]0xC403:Invalid value was specified in the rc options.

[UNIX]0xC404:Invalid value was specified in the ri options.

[UNIX]0xC406:Interrupted due to a message notification.

[UNIX]0xC407:The Task Link Engine process startup request was not accepted.

[UNIX]0xC409:Failed to get the user password.

[UNIX]0xC40A:Either the rc options or the ri options was not specified.

[UNIX]0xC40C:The operation content was not specified.

[UNIX]0xC40D:The path name was not specified.

[UNIX]0xC40E:The file name to rename was not specified.

[UNIX]0xC40F:The path name was not specified correctly.

[UNIX]0xC410:The login and user definition name was not specified.

[UNIX]0xC411:Invalid parameter was specified.

[UNIX]0xC412:The host name was not specified.

[UNIX]0xC415:The user name was not specified correctly.

[UNIX]0xC416:The host name was not specified correctly.

[UNIX]0xC417:The file name to rename was not specified correctly.

[UNIX]0xC418:The login definition name was not specified correctly.

[UNIX]0xC501:The command parameter is insufficient.

[UNIX]0xC502:The host name was not specified.

[UNIX]0xC503:The command parameter is already in use.

[UNIX]0xC504:Invalid value was specified in the rc options.

[UNIX]0xC505:Invalid value was specified in the ri options.

[UNIX]0xC506:Either the rc options or the ri options was not specified.

[UNIX]0xC507:The p options and e options were specified simultaneously.

[UNIX]0xC508:p options and e options must be specified.

[UNIX]0xC509:Invalid parameter was specified.

[UNIX]0xC50A:The host name was not specified correctly.

[UNIX]0xC520:The Task Link Engine process startup request was not accepted.

[UNIX]0xC530:The source path name was not specified correctly.

[UNIX]0xC531:The destination path name was not specified correctly.

[UNIX]0xC540:Interrupted due to a message notification.

0xa9f5 : The starting application was forced to cancel by the user's operation.

[Windows]0xB001:The command parameter is already in use.

[Windows]0xB002:The command parameter is insufficient.

[Windows]0xB003:Invalid value was specified in the RC options.

[Windows]0xB004:Invalid value was specified in the RI options.

[Windows]0xB005:Failed to create thread.

[Windows]0xB006:Interrupted due to a message notification.

[Windows]0xB007:The Task Link Engine process startup request was not accepted.

[Windows]0xB008:Invalid value was specified in the WE options.

[Windows]0xB009:Failed to get the user password.

[Windows]0xB00A:Either the RC options or the RI options was not specified.

[Windows]0xB00B:The user name was not specified correctly(computer name\user name).

[Windows]0xB00C:The login and user definition name was not specified.

[Windows]0xB00D:Invalid parameter was specified.

[Windows]0xB00E:Host name was not specified.

[Windows]0xB015:Invalid value was specified in the AE options.

[Windows]0xB015:Invalid value was specified in the AM options.

[Windows]0xB016:Invalid value was specified in the AE options.

[Windows]0xB016:The login user name was not specified correctly.

[Windows]0xB017:Host name was not specified correctly.

[UNIX]0xB810(YYY):Processing is stopped due to a user operation.

[UNIX]0xB820(YYY):The parameter is already in use.

[UNIX]0xB821(YYY):The parameter is insufficient.

[UNIX]0xB822(YYY):Invalid value was specified in the rc options.

[UNIX]0xB823(YYY):Invalid value was specified in the ri options.

[UNIX]0xB824(YYY):Either the rc options or the ri options was not specified.

[UNIX]0xB826(YYY):Invalid parameter was specified.

[UNIX]0xB828(YYY):Specify an application to execute.

[UNIX]0xB840(YYY):The application can not be executed.

[UNIX]0xB850(YYY):The specified user does not exist.

[UNIX]0xB851(YYY):It is not possible to execute by the specified user.

[UNIX]0xC201:The command parameter is already in use.

[UNIX]0xC202:The command parameter is insufficient.

[UNIX]0xC203:Invalid value was specified in the rc options.

[UNIX]0xC204:Invalid value was specified in the ri options.

[UNIX]0xC206:Interrupted due to a message notification.

[UNIX]0xC207:The Task Link Engine process startup request was not accepted.

[UNIX]0xC210:Either the rc options or ri options was not specified.

[UNIX]0xC215:Invalid value was specified in the am options.

[UNIX]0xC217:Invalid parameter was specified.

[UNIX]0xC218:Host name was not specified.

[UNIX]0xC219:Host name was not specified correctly.

[UNIX]0xC224:Invalid value was specified in the we options.

[Windows]0xB001:The command parameter is already in use.

[Windows]0xB001(YYY):The specified parameter is invalid.

[Windows]0xB002:The command parameter is insufficient.

[Windows]0xB002(YYY):Processing cannot continue due to an internal initialization failure.

[Windows]0xB003:Invalid value was specified in the RC options.

[Windows]0xB004:Invalid value was specified in the RI options.

[Windows]0xB005:Failed to create thread.

[Windows]0xB005(YYY):Failed to get the Power ON process memory.

[Windows]0xB006:Interrupted due to a message notification.

[Windows]0xB006(YYY):Failed to load the communication library.

[Windows]0xB007:The Task Link Engine process startup request was not accepted.

[Windows]0xB007(YYY):Processing cannot continue due to an internal initialization failure.

[Windows]0xB008(YYY):Processing cannot continue due to an internal initialization failure.

[Windows]0xB009(YYY):Failed to open the registry key.

[Windows]0xB00A:Either the RC options or the RI options was not specified.

[Windows]0xB00A(YYY):Failed to refer to the information of the registry key.

[Windows]0xB00B(YYY):Failed to deliver the Power ON request.

[Windows]0xB00C(YYY):Failed to wait for Power ON confirmation.

[Windows]0xB00D(YYY):Failed to confirm Power ON.

[Windows]0xB00F(YYY):Processing cannot continue due to an internal initialization failure.

[Windows]0xB010(YYY):Processing cannot continue due to an internal initialization failure.

[Windows]0xB011:Invalid parameter was specified.

[Windows]0xB011(YYY):Object host cannot be found.

[Windows]0xB012:The host name was not specified.

[Windows]0xB012(YYY):Failed to get the communication socket.

[Windows]0xB013:Invalid value was specified in the SD options.

[Windows]0xB013(YYY):Failed to deliver the request data.

[Windows]0xB014(YYY):Failed to receive the response data.

[Windows]0xB015:The host name was not specified correctly.

[Windows]0xB015(YYY):Failed to wait for response data reception.

[Windows]0xB016(YYY):Abnormality occurred in the communication socket.

[Windows]0xB017(YYY):Abnormality occurred in the communication socket.

[Windows]0xB018(YYY):Failed to confirm Power ON.

[Windows]0xB019(YYY):Failed to confirm Power ON.

[Windows]0xB01A(YYY):Failed to confirm Power ON.

[Windows]0xB01B(YYY):Failed to confirm Power ON.

[Windows]0xB032(YYY):Failed to get the MAC address from the host information definition.

[Windows]0xB033(YYY):Failed to get the IP address from the host information definition.

[Windows]0xB034(YYY):Failed to get the subnet mask from the host information definition.

[Windows]0xB0FE(YYY):Terminates the process.

[UNIX]0xC001(YYY):The specified parameter is invalid.

[UNIX]0xC005(YYY):Failed to get the Power ON process memory.

[UNIX]0xC007(YYY):Processing cannot continue due to an internal initialization failure.

[UNIX]0xC00B(YYY):Failed to deliver the Power ON request.

[UNIX]0xC00C(YYY):Failed to wait for Power ON confirmation.

[UNIX]0xC00D(YYY):Failed to confirm Power ON.

[UNIX]0xC010(YYY):Processing cannot continue due to an internal initialization failure.

[UNIX]0xC011(YYY):Object host cannot be found.

[UNIX]0xC012(YYY):Failed to get the communication socket.

[UNIX]0xC013(YYY):Failed to deliver the request data.

[UNIX]0xC014(YYY):Failed to receive the response data.

[UNIX]0xC015(YYY):Failed to wait for response data reception.

[UNIX]0xC016(YYY):Abnormality occurred in the communication socket.

[UNIX]0xC017(YYY):Abnormality occurred in the communication socket.

[UNIX]0xC018(YYY):Failed to confirm Power ON.

[UNIX]0xC019(YYY):Failed to confirm Power ON.

[UNIX]0xC01A(YYY):Failed to confirm Power ON.

[UNIX]0xC01B(YYY):Failed to confirm Power ON.

[UNIX]0xC032(YYY):Failed to get the MAC address from the host information definition.

[UNIX]0xC033(YYY):Failed to get the IP address from the host information definition.

[UNIX]0xC034(YYY):Failed to get the subnet mask from the host information definition.

[UNIX]0xC0FE(YYY):Terminates the process.

[UNIX]0xC101:The command parameter is already in use.

[UNIX]0xC102:The command parameter is insufficient.

[UNIX]0xC103:Invalid value was specified in the rc options.

[UNIX]0xC104:Invalid value was specified in the ri options.

[UNIX]0xC105:Either the rc options or the ri options was not specified.

[UNIX]0xC106:Invalid parameter was specified.

[UNIX]0xC107:The host name was not specified.

[UNIX]0xC108:Invalid value was specified in the sd options.

[UNIX]0xC109:The host name was not specified correctly.

[UNIX]0xC10A:Interrupted due to a message notification.

[UNIX]0xC10B:The Task Link Engine process startup request was not accepted.

[Windows]0x00000064(YYY):Failed to refer to the registry.

[UNIX]0x00000064(YYY):The path name is too long.

[UNIX]0x00000065(YYY):The password administration file does not exist.

[Windows]0x00000066(YYY):The path name is too long.

[UNIX]0x00000066(YYY):A directory with the same name as the password administration file exists.

[Windows]0x00000067(YYY):The password administration file does not exist.

[UNIX]0x00000067(YYY):Abnormality occurred while searching files.

[UNIX]0x00000068(YYY):The password administration directory does not exist.

[Windows]0x00000069(YYY):A directory with the same name as the password administration file exists.

[UNIX]0x00000069(YYY):Failed to create the password administration file.

[Windows]0x0000006A(YYY):Abnormality occurred while searching files.

[UNIX]0x0000006A(YYY):Failed to read the password administration file.

[Windows]0x0000006B(YYY):The password administration directory does not exist.

[UNIX]0x0000006B(YYY):Abnormality exists in the password administration file contents.

[Windows]0x0000006C(YYY):Failed to create the password administration file.

[UNIX]0x0000006C(YYY):Home directory does not exist.

[Windows]0x0000006D(YYY):Failed to read the password administration file.

[Windows]0x0000006E(YYY):Abnormality exists in the password administration file contents.

[UNIX]0x0000006E(YYY):The specified user is not registered.

[Windows]0x0000006F(YYY):Home directory does not exist.

[Windows]0x00000070(YYY):Failed to get the error message.

[Windows]0x00000071(YYY):The specified user is not registered.

[UNIX]0x00000071(YYY):Failed to write to the password administration file.

[Windows]0x00000072(YYY):The password administration file is already opened.

[UNIX]0x00000072(YYY):The specified user is already registered.

[UNIX]0x00000073(YYY):Failed to secure the memory.

[Windows]0x00000074(YYY):Failed to write to the password administration file.

[UNIX]0x00000074(YYY):Failed to encrypt the password.

[Windows]0x00000075(YYY):The specified user is already registered.

[UNIX]0x00000075(YYY):Current user is not authorized to access the password administration file.

[Windows]0x00000076(YYY):Failed to secure the memory.

[UNIX]0x00000076(YYY):The login definition name is of invalid length.

[Windows]0x00000077(YYY):Failed to encrypt the password.

[UNIX]0x00000077(YYY):The user name is of invalid length.

[Windows]0x00000078(YYY):Failed to get the OS information.

[UNIX]0x00000078(YYY):The password is of invalid length.

[Windows]0x00000079(YYY):Current user is not authorized to access the password administration file.

[Windows]0x0000007A(YYY):The login definition name is of invalid length.

[UNIX]0x0000007A(YYY):The specified user name is not specified correctly.

[Windows]0x0000007B(YYY):The user name is of invalid length.

[UNIX]0x0000007B(YYY):The login definition name is not specified correctly.

[Windows]0x0000007C(YYY):The password is of invalid length.

[Windows]0x0000007E(YYY):The specified user name is not specified correctly.

[Windows]0x0000007F(YYY):The login definition name is not specified correctly.

[error]0xe00aa201:The service start processing watch did the time-out.

Client Task Link has already started.

Error occurred when Client Task Link engine start.Error Event ID(0xA818)Failed to bind the socket for control path establishment during the initialization of communication controller.

Error occurred when Client Task Link engine start.Error Event ID(0xA81A)Failed to bind the socket for Objects connection during the initialization of communication controller.

Web server setup failed.

mpowebsetup command has been completed successfully.

usage: mpowebsetup [-u]

mpowebconfig command has been completed successfully.

usage: mpowebconfig -o "filename" | -i "filename"

Failed to open the file (%1).

Format of input file (%1) is invalid.

Value (%2) in input file (%1) is duplicated.

Failed to open the output file (%1).

[Windows] Systemwalker Operation Manager is running. [UNIX] Systemwalker Operation Manager is running.

MpStem: INFO: 10001: Creating schedule information. (yyyymmdd)

MpStem: INFO: 10002: Created the schedule information. (yyyymmdd)

MpStem: INFO: 10003: Schedule information already exists. Could not create it. (yyyymmdd)

MpStem: INFO: 10004: Deleting the schedule information. (yyyymmdd)

MpStem: INFO: 10005: Deleted the schedule information. (yyyymmdd)

MpStem: INFO: 10006: Operation Change has been completed successfully.

MpStem: INFO: 10007: XXXX exited normally.

MpStem: INFO: 10008: Operation Change has been canceled successfully.

MpStem: INFO: 10010: A job net on the previous day is not completed.

MpStem: INFO: 10011: The project has been deleted successfully.

MpStem: INFO: 10012: The project has been registered successfully.

MpStem: INFO: 10013: The project has been deselected as master.

MpStem: INFO: 10014: Schedule information does not exist.

MpStem: INFO: 10015: The number of projects reached the maximum. Created a backup of obsolete schedules.

MpStem: INFO: 10016: IP address has been assigned successfully.

MpStem: ERROR: 10100: Schedule information already exists. Cannot create it. (yyyymmdd)

MpStem: ERROR: 10101: Schedule information is currently being created. Cannot create it. (yyyymmdd)

MpStem: ERROR: 10102: Schedule information is currently being created by another process. Cannot create it. (yyyymmdd)

MpStem: ERROR: 10103: Failed to create schedule information. (yyyymmdd)

MpStem: ERROR: 10104: Failed to extract the schedule information.

MpStem: ERROR: 10105: Failed to write the schedule management file.

MpStem: ERROR: 10106: Failed to distribute the schedule information. (XXXX)

MpStem: ERROR: 10107: Failed to register the schedule information. (XXXX)

MpStem: ERROR: 10108: Schedule server does not exist. (XXXX)

MpStem: ERROR: 10109: Invalid data. Failed to register the project information. (XXXX)

MpStem: ERROR: 10110: Invalid data. Failed to register the schedule information. (XXXX)

MpStem: ERROR: 10112: Failed to communicate with Schedule Server. (XXXX)

MpStem: ERROR: 10113: Same host name is defined more than once in the definition on Schedule Server. (XXXX)

MpStem: ERROR: 10114: Same IP address is defined more than once in the definition on Schedule Server. (XXXX)

MpStem: ERROR: 10119: Environment is not configured correctly. (XXXX)

MpStem: ERROR: 10120: Failed to delete the schedule information. (XXXX)

MpStem: ERROR: 10121: Could not delete the schedule information. (yyyymmdd)

MpStem: ERROR: 10123: Cannot create schedule information for the past date. (yyyymmdd)

MpStem: ERROR: 10124: Deletion of the schedule information failed previously. Cannot create it. (yyyymmdd)

MpStem: ERROR: 10125: Cannot reschedule for the current or the past date. (yyyymmdd)

MpStem: ERROR: 10126: Schedule information is not created. Cannot reschedule. (yyyymmdd)

MpStem: ERROR: 10127: Cannot delete the schedule information for the current or the past date. (yyyymmdd)

MpStem: ERROR: 10128: Schedule information does not exist. (yyyymmdd)

MpStem: ERROR: 10131: Subsystem environment is not created.

MpStem: ERROR: 10132: Invalid value is specified in the schedule configuration file.

MpStem: ERROR: 10133: Can only schedule 30 days into the future. (yyyymmdd)

MpStem: ERROR: 10134: Cannot schedule for a date in the previous year. (yyyymmdd)

MpStem: ERROR: 10136: Operation Change has failed.

MpStem: ERROR: 10137: Failed to check the schedule for Operation Change.

MpStem: ERROR: 10138: Cannot run the schedule because the Operation Change process has failed previously.

MpStem: ERROR: 10139: No operation is scheduled by dates. Cannot schedule using Schedule Server.

MpStem: ERROR: 10141: Schedule information has already been applied. Cannot delete it. (XXXX)

MpStem: ERROR: 10142: Failed to cancel the operation change.

MpStem: ERROR: 10143: Virtual time is not in sync between servers. (XXXX)

MpStem: ERROR: 10144: Cannot read the master setting of the project. (XXXX)

MpStem: ERROR: 10145: Could not check if the schedule information is registered. (XXXX)

MpStem: ERROR: 10148: A schedule server has been added. Cannot start the schedule for error status.

MpStem: ERROR: 10149: The string exceeded the maximum size (bytes) after encoding. (XXXX)

MpStem: ERROR: 10150: Cannot distribute schedules to an earlier version of the schedule server. (XXXX)

MpStem: ERROR: 10151: One or more functions in the definitions are not supported.(XXXX)

MpStem: ERROR: 10152: Cannot schedule for a date in the previous year. (XXXX)

MpStem: WARNING: 10201: There is no information to create a schedule.

MpStem: WARNING: 10202: Invalid value is specified in the schedule configuration file.

MpStem: WARNING: 10203: Registering the schedule information... (XXXX)

MpStem: WARNING: 10204: Failed to delete the registered information.

MpStem: WARNING: 10206: There is no subsystem to configure.

MpStem: WARNING: 10207: Job net information not found.

MpStem: WARNING: 10208: History information of job net is not found.

MpStem: WARNING: 10209: There is a project that is not set as master. (XXXX)

MpStem: WARNING: 10210: Failed to load the audit log library.

MpStem: WARNING: 10211: Failed to read the audit log file.

MpStem: WARNING: 10214: Cannot create schedule information for the past date. (XXXX).

MpStem: ERROR: 10300: XXXX: Invalid option is specified.

MpStem: ERROR: 10302: Not a privileged user.

MpStem: ERROR: 10305: Cannot preset Operation Change because the Operation Change process has failed previously. (XXXX)

MpStem: ERROR: 10306: Failed to preset the operation change.

MpStem: ERROR: 10307: There is no registered information to release on the specified date.

MpStem: ERROR: 10308: Registered information to release on the specified date already exists.

MpStem: ERROR: 10309: Failed to change the release date.

MpStem: ERROR: 10310: Cannot cancel the Operation Change because the Operation Change process has failed previously. (XXXX)

MpStem: ERROR: 10311: No change of operation has been made for the specified release date.

MpStem: ERROR: 10312: Failed to cancel the operation change.

MpStem: ERROR: 10313: The specified project is not set as master or does not exist.

MpStem: ERROR: 10315: Failed to read the project information.

MpStem: ERROR: 10316: Failed to read the job net information. (XXXX)

MpStem: ERROR: 10317: Failed to write the job net information.

MpStem: ERROR: 10318: Failed to read the group information.

MpStem: ERROR: 10319: Failed to write the group information.

MpStem: ERROR: 10320: Failed to read the parameter information file.

MpStem: ERROR: 10321: Failed to write the parameter information file.

MpStem: ERROR: 10323: Failed to check the Operation Change status.

MpStem: ERROR: 10324: The LANG value is different. Reset LANG environment variable. Rerun command.

MpStem: ERROR: 10325: The LANG value is incorrect.

MpStem: ERROR: 10326: Jobscheduler daemon is not running.

MpStem: ERROR: 10327: Starting Jobscheduler daemon.

MpStem: ERROR: 10328: Systemwalker MpJobsch stopped and cannot be controlled.

MpStem: ERROR: 10329: Failed to occur a message event.

MpStem: ERROR: 10330: Failed to obtain privilege information for the user.

MpStem: ERROR: 10331: Project information does not exist.

MpStem: ERROR: 10333: Failed to initialize the command.

MpStem: ERROR: 10334: Failed to delete the project.

MpStem: ERROR: 10335: Failed to register and update the projects.

MpStem: ERROR: 10336: Cannot set the specified project as master.

MpStem: ERROR: 10337: Failed to suppress the project.

MpStem: ERROR: 10338: Failed to deselect the project as master.

MpStem: ERROR: 10340: Failed to load the ACL library.

MpStem: ERROR: 10341: The group status is 'controlled' or 'being saved'.

MpStem: ERROR: 10342: The group status is 'executing' or 'warning'.

MpStem: ERROR: 10343: The job net status is 'controlled' or 'being saved'.

MpStem: ERROR: 10344: The job net status is 'executing' or 'warning'.

MpStem: ERROR: 10345: The project has a job net to carry over across the day change time. Cannot delete the project.

MpStem: ERROR: 10346: Cannot find the installation path.

MpStem: ERROR: 10347: Cannot find the DB path for Master Schedule Management.

MpStem: ERROR: 10348: Cannot find the DB path.

MpStem: ERROR: 10349: An error occurred while accessing the directory on the subsystem.

MpStem: ERROR: 10350: Failed to obtain the schedule information.

MpStem: ERROR: 10351: User does not belong to permitting group.

MpStem: ERROR: 10352: Master Schedule Management environment is not constructed.

MpStem: ERROR: 10353: Environment is not configured correctly.

MpStem: ERROR: 10354: Cannot assign the IP address due to invalid settings.

MpStem: ERROR: 10355: The subsystem must have the daily schedule.

MpStem: ERROR: 10356: The specified schedule server does not exist.

MpStem: ERROR: 10357: The IP address defined for the schedule server is already in use for another host.

MpStem: ERROR: 10358: It is already assigned to a management server.

MpStem: ERROR: 10359: Failed to assign the IP address.

MpStem: ERROR: 10360: The server must be a management server.

MpStem: ERROR: 10361: Cannot deselect the specified project as master.

MpStem: ERROR: 10362: Cannot change the release date, because Operation Change has failed for the specified release date.

MpStem: ERROR: 10363: Log information is not found.

MpStem: ERROR: 10364: Failure in access acquisition.

MpStem: ERROR: 10365: The project does not exist or access is denied. (XXXX)

MpStem: ERROR: 10366: The history information specified for a day cannot be read.

MpStem: ERROR: 10367: The specified job net is a child job net.

MpStem: ERROR: 10368: The specified job net belongs to a group.

MpStem: ERROR: 10369: The specified job net does not exist.

MpStem: ERROR: 10370: The specified job net is already registered in a project scheduled by dates.

MpStem: ERROR: 10371: Unable to process the request because of an error in creating schedule information.

MpStem: ERROR: 10372: The specified process date is not among the startup days.

MpStem: ERROR: 10373: The specified process date does not have schedule information.

MpStem: ERROR: 10374: The Add Job Net Schedule command is already running.

MpStem: ERROR: 10375: Failed to add the job net schedule to the project.

MpStem: ERROR: 10376: The option is not supported on the specified host. (XXXX)

MpStem: ERROR: 10377: The specified job net is a linked job net.

swotclsh: 129 Bad parameter.

swotclsh: 130 Insufficient memory.

swotclsh: 131 Failed to get installation path.

swotclsh: 132 Failed to start process. (process=%1)

swotclsh: 133 Failed to get status of process. (process=%1, pid = %2)

swotclsh: 134 Failed to open file. (file name=%1)

swotclsh: 135 Failed to read file. (file name=%1)

swotclsh: 136 Internal operation abnormality occurred. (error code=%1)

MpSSO: INFO: 10000: ServerView Operations Manager Single Sign-On linkage setup has started.

MpSSO: INFO: 10001: ServerView Operations Manager Single Sign-On linkage setup completed successfully.

MpSSO: INFO: 10002: ServerView Operations Manager Single Sign-On linkage setup was canceled.

MpSSO: INFO: 10003: ServerView Operations Manager Single Sign-On linkage has already been setup. Reconfigure? (y/n)

MpSSO: INFO: 10100: The ServerView Operations Manager Single Sign-On linkage settings removal has started.

MpSSO: INFO: 10101: The ServerView Operations Manager Single Sign-On linkage settings removal completed successfully.

MpSSO: INFO: 10102: The ServerView Operations Manager Single Sign-On linkage settings removal was canceled.

MpSSO: INFO: 10103: The ServerView Operations Manager Single Sign-On linkage settings will be removed. Continue? (y/n)

MpSSO: INFO: 10200: The ServerView Operations Manager Single Sign-On linkage settings display has started.

MpSSO: INFO: 10201: The ServerView Operations Manager Single Sign-On linkage settings display completed successfully.

MpSSO: ERROR: 50000: Failed to complete the ServerView Operations Manager Single Sign-On linkage setup.

MpSSO: ERROR: 50100: Failed to remove the ServerView Operations Manager Single Sign-On linkage settings.

MpSSO: ERROR: 50200: Failed to display the ServerView Operations Manager Single Sign-On linkage settings.

MpSSO: ERROR: 50900: Failed to access the definition file. File=[%1]

MpSSO: ERROR: 50901: Failed to create the temporary file. File=[%1]

MpSSO: ERROR: 50902: This environment is not supported so configuration is not possible.

MpSSO: ERROR: 50999: An internal error occurred.