This section describes the messages generated by the Password Management command.
[Description]
Registry information required to operate this software does not exist.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Contact your system administrator.
[System Administrator Response]
Reinstall the software.
If the problem cannot be resolved, collect the data of the following functions by using Maintenance Information Collection tool, and contact your Fujitsu systems engineer.
Server Task Link
Client Task Link
Depending on the options you selected during installation, one of the above functions may not exist. In that case, collect only the data of function that you can select.
[Target Commands]
Password Management Command
[Description]
The length of path name for password management book exceeds the valid number of characters.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Shorten the login definition name so as not to exceed the limit.
The maximum length of login definition name that can be specified is as follow:
Maximum length (bytes) of login definition name = 223 (bytes) - Length (bytes) of Systemwalker Operation Manager installation directory
[Target Commands]
Password Management Command
[Description]
The password management book file for login definition name that you specified does not exist.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Create a new password management book or specify the password management book that is already created.
For details about a password management book, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
The path name to create the password management book exceeded the maximum number of characters.
[Parameter]
YYY: System error code given by the password management command
[User Response]
Shorten the login definition name so as not to exceed the limit. The maximum length of login definition name that can be specified is as follow:
Maximum length (bytes) of login definition name = 223 (bytes) - Length (bytes) of Systemwalker Operation Manager installation directory
[Target Commands]
Password Management Command
[Description]
Directory with the same name as the password management book file has been created.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Delete the directory from the password management book file directory.
For details about a password management book, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
A password management book file of login definition name that you specified is not created.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Delete the directory from the password management book file directory
For details about the password management book file directory, see to the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
Failed to access the password management book.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Contact your system administrator.
[System Administrator Response]
Check whether there is a problem with the password management book directory, the contents of password management book file, or the permission setting for the password management directory or file.
For details about storage location and file name of password management book file, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
A directory to save the password management book file does not exist.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Contact your system administrator.
[System Administrator Response]
Create the directory for the password management book given in the Systemwalker Operation Manager Installation Guide or reinstall this software.
If the problem cannot be resolved, collect the data of the following functions by using Maintenance Information Collection tool, and contact your Fujitsu systems engineer.
Server Task Link
Client Task Link
Depending on the options you selected during installation, one of the above functions may not exist. In that case, collect only the data of function that you can select.
[Target Commands]
Password Management Command
[Description]
A directory with the same name as the password management book is present in the directory for the password management book.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Delete the directory from the password management book file directory.
For details about the password management book file directory, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
Could not create a password management book file newly.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Contact your system administrator.
[System Administrator Response]
Check the following:
Verify whether there is enough disk space.
Verify whether permissions of users to write to the directory such as for password management book are configured.
For details about storage location and file name of password management book file, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
Could not normally access the password management book.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Contact your system administrator.
[System Administrator Response]
Check if access limits are set for the password management book directory.
For details about a directory to save the password management book, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
Could not read the password management book file normally.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Contact your system administrator.
[System Administrator Response]
Check the following:
Verify whether permissions of users to read the directory/file for password management book are configured.
Verify whether a file in the password management book directory is used by other application.
For details about storage location and file name of password management book file, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
Directory for the password management book file has not been created.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Contact your system administrator.
[System Administrator Response]
Create the directory for the password management book given in the Systemwalker Operation Manager Installation Guide or reinstall this software.
If the problem cannot be resolved, collect the data of the following functions by using Maintenance Information Collection tool, and contact your Fujitsu systems engineer.
Server Task Link
Client Task Link
Depending on the options you selected during installation, one of the above functions may not exist. In that case, collect only the data of function that you can select.
[Target Commands]
Password Management Command
[Description]
Data of password management book file is corrupted.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Contact your system administrator.
[System Administrator Response]
Delete the corrupted password management book file, and register the file by using the password management command again.
For details about storage location and file name of password management book file, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
Could not write to the password management book file normally.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Contact your system administrator.
[System Administrator Response]
Check whether there is enough disk space and the password management book directory is not write protected.
For details about a directory to save the password management book, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
Installation directory of this software does not exist.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Contact your system administrator.
[System Administrator Response]
Re-install this software.
If the problem cannot be resolved, collect the data of the following functions by using Maintenance Information Collection tool, and contact your Fujitsu systems engineer.
Server Task Link
Client Task Link
Depending on the options you selected during installation, one of the above functions may not exist. In that case, collect only the data of function that you can select.
[Target Commands]
Password Management Command
[Description]
Could not read the password management book file normally.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Check whether the password management book file is opened by other software. Contact your system administrator if the problem is not resolved.
For details about storage location and file name of password management book file, see the Systemwalker Operation Manager Installation Guide.
[System Administrator Response]
Check if access limits are set for the password management book file.
For details about storage location and file name of password management book file, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
An anomaly was found in the contents of the password management book.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Delete the file that contains errors and create a new file.
For details about storage location and file name of password management book file, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
The user with the login definition name/user name that you specified is not registered.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Check the user names that are registered.
[Target Commands]
Password Management Command
[Description]
Installation directory of the software does not exist.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Contact your system administrator.
[System Administrator Response]
Reinstall the software.
If the problem cannot be resolved, collect the data of the following functions by using Maintenance Information Collection tool, and contact your Fujitsu systems engineer.
Server Task Link
Client Task Link
Depending on the options you selected during installation, one of the above functions may not exist. In that case, collect only the data of function that you can select.
[Target Commands]
Password Management Command
[Description]
Memory is not enough.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Close other applications.
[Target Commands]
Password Management Command
[Description]
An error exists in the user name or it is not registered in the password management book.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Check user names that are registered.
[Target Commands]
Password Management Command
[Description]
Could not write to the password management book file normally.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Contact your system administrator.
[System Administrator Response]
Check the following:
Verify whether permissions of users to write to the directory/file for password management book are configured.
Verify whether a file in the password management book directory is used by other application.
For details about storage location and file name of password management book file, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
Internal error
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Contact your system administrator.
[System Administrator Response]
Restart the system.
If the problem cannot be resolved, collect the data of the following functions by using Maintenance Information Collection tool, and contact your Fujitsu systems engineer.
Server Task Link
Client Task Link
Depending on the options you selected during installation, one of the above functions may not exist. In that case, collect only the data of function that you can select.
[Target Commands]
Password Management Command
[Description]
Attempted to register a user name that is already registered.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Carry out the update designation.
[Target Commands]
Password Management Command
[Description]
There is not enough memory available in the operation environment.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Close applications that are not required.
[System Administrator Response]
Increase the physical memory or change the swap setting.
[Target Commands]
Password Management Command
[Description]
Could not write to the password management book file normally.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Check the following:
Check if access limits are set for the password management book file.
Check whether the password management book file is opened by other software.
For details about storage location of password management book file, see the Systemwalker Operation Manager Installation Guide.
[Target Commands]
Password Management Command
[Description]
Internal error.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Contact your system administrator.
[System Administrator Response]
Restart the system.
If the problem cannot be resolved, collect the data of the following functions by using Maintenance Information Collection tool, and contact your Fujitsu systems engineer.
Server Task Link
Client Task Link
Depending on the options you selected during installation, one of the above functions may not exist. In that case, collect only the data of function that you can select.
[Target Commands]
Password Management Command
[Description]
Attempted to register a user name that is already registered.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Carry out the update designation.
[Target Commands]
Password Management Command
[Description]
The current user does not have permission to access the password management book file with the specified login definition name.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Specify a login definition name that is accessible.
[Target Commands]
Password Management Command
[Description]
Memory is not enough.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Close other applications.
[Target Commands]
Password Management Command
[Description]
The specified login definition name is too short or too long.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Specify the login definition name in the range from several characters to a few dozen characters.
The maximum length of login definition name that can be specified is as follow:
Maximum length (bytes) of login definition name = 223 (bytes) - Length (bytes) of Systemwalker Operation Manager installation directory
[Target Commands]
Password Management Command
[Description]
Internal error.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Contact your system administrator.
[System Administrator Response]
Restart the system.
If the problem cannot be resolved, collect the data of the following functions by using Maintenance Information Collection tool, and contact your Fujitsu systems engineer.
Server Task Link
Client Task Link
Depending on the options you selected during installation, one of the above functions may not exist. In that case, collect only the data of function that you can select.
[Target Commands]
Password Management Command
[Description]
The specified user name is too short or too long.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Specify the user name in the range from 1 character to 20 characters in length.
If the user name contains a computer name/domain name, must be truncated to 15 characters.
[Target Commands]
Password Management Command
[Description]
Failed to get the information of computer name, group name, and user name.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Contact your system administrator.
[System Administrator Response]
Check whether network setting of OS is correctly configured.
[Target Commands]
Password Management Command
[Description]
The specified password is too short or too long.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Specify the password in the range from 1 character to 50 characters in length.
[Target Commands]
Password Management Command
[Description]
The current user is not a member of the group having the same name as the login definition name.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Log on as a user who is a member of the group having the same name as the login definition name
[Target Commands]
Password Management Command
[Description]
The specified login definition name is too short or too long.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Specify the login name in the range from several characters to a few dozen characters.
The maximum length of login definition name that can be specified is as follow:
Maximum length (bytes) of login definition name = 223 (bytes) - Length (bytes) of Systemwalker Operation Manager installation directory
[Target Commands]
Password Management Command
[Description]
There is an error in the format/characters of user name.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Check the user name.
[Target Commands]
Password Management Command
[Description]
The specified user name is too short or too long.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Specify the user name in the range from 1 character to 20 characters in length.
If the user name contains a computer name/domain name, the part must be truncated to 15 characters.
[Target Commands]
Password Management Command
[Description]
There is an error in the format/characters of login definition name.
[Parameter]
YYY : System error code notified by the password management command
[System Action]
Terminates the process.
[User Response]
Check the login definition name.
[Target Commands]
Password Management Command
[Description]
The specified password is too short or too long.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Specify the password in the range 1 to 50 characters in length.
[Target Commands]
Password Management Command
[Description]
User name is not specified correctly.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Check the user name.
[Target Commands]
Password Management Command
[Description]
There is an error in the format/characters of login definition name.
[Parameter]
YYY: System error code notified by the password management command
[User Response]
Check the login definition name.
[Target Commands]
Password Management Command
