Systemwalker Operation Manager Message Guide

3.4 Messages Output by Security Command

This section explains messages output by the security command.

[Windows]
mpsetacl -a -t target -u user|-g group|-w wellknown [-s domain] -p r|w|x|c
mpsetacl -d -t target [-u user|-g group|-w wellknown [-s domain]]

[Description]

The correct mpsetacl command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]
mpsetacl -a -t target -u user|-g group [-s domain] -p r|w|x|c
mpsetacl -d -t target [-u user|-g group [-s domain]]

[Description]

The correct mpsetacl command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[Windows]You don't have enough privilege to execute this command.

[Description]

A command was executed by a user who did not have the required execution privileges.

[System Action]

Aborts processing.

[User Response]

The user who executes the command must have execution privileges.

[Windows]You do not belong to Administrators group.

[Description]

A user who does not belong to the Administrators group has executed a command available only for users in the Administrators group.

[System Action]

Aborts processing.

[User Response]

When executing the command, the user must belong to the Administrators group.

[Windows]Internal error.

[Description]

Internal error has occurred.

[System Action]

Aborts processing.

[System Administrator Response]

Collect the information about server functions by using the Maintenance Information Collection Tool, and contact Fujitsu technical support.

[UNIX]You are not a super-user.

[Description]

A non-privileged user attempted to execute a command that required System Administrator (superuser) privileges.

[System Action]

Aborts processing.

[User Response]

Execute the command with superuser privileges.

[UNIX]Failed to convert into SJIS code.

[Description]

An attempt to convert to SJIS code has failed.

[System Action]

Aborts processing.

[User Response]

Check the command arguments to ensure that they do not contain any invalid characters.

Could not create '%1'

[Description]

Access rights could not be set because access control information failed to be created.

[Parameter]

%1: Project name

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

Control file was broken.

[Description]

Operation Manager user information could not be read due to an error in the definition file of the Operation Manager user.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

Could not read control file.

[Description]

The definition file of the Operation Manager user could not be read.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]User '%1' not found.

[Description]

Access rights could not be set because the specified user does not exist.

[Parameter]

%1: User name

[System Action]

Aborts processing.

[User Response]

Specify the correct user name and execute the command again.

[Windows]Account '%1' not found.

[Description]

Access rights could not be set because the specified account does not exist.

[Parameter]

%1: Account name

[System Action]

Aborts processing.

[User Response]

Specify the correct account name and execute the command again.

Group '%1' not found.

[Description]

Access rights could not be set because the specified group does not exist.

[Parameter]

%1: Group name

[System Action]

Aborts processing.

[User Response]

Specify the correct group name and execute the command again.

Could not set access rights to '%1'.

[Description]

An attempt to set access rights to the specified project has failed.

[Parameter]

%1: Project name

[System Action]

Aborts processing.

[System Administrator Response]

Check if the system has sufficient memory (and resources).

If there are no memory-related problems, the ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

Target '%1' not found.

[Description]

Access rights could not be set because the specified project does not exist.

[Parameter]

%1: Project name

[System Action]

Aborts processing.

[User Response]

Specify the correct project name and execute the command again.

The project name should be specified in the following format:

[Windows version]

  mpjobsch\schedule\project name

If multiple subsystem operation is being performed, specify the project in the following format*1:

  mpjobsch\schedulen\project name

n: Subsystem number (1 to 9)

*1) Specify the project in Subsystem 0 using the same format as that used when multiple subsystem operation is not being performed.

[UNIX version]

  mpjobsch/schedule/project name

If multiple subsystem operation is being performed, specify the project in the following format*1:

  mpjobsch/schedulen/project name

n: Subsystem number (1 to 9)

*1) Specify the project in Subsystem 0 using the same format as that used when multiple subsystem operation is not being performed.

Could not remove owner of '%1'.

[Description]

Owner information could not be deleted.

[Parameter]

%1: Project name

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

Could not remove access rights of '%1'.

[Description]

Access control information could not be deleted.

[Parameter]

%1: Project name

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

Could not remove '%1'.

[Description]

An attempt to delete the access rights to the specified project has failed.

[Parameter]

%1: Project name

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[Windows]mpchown -t target [-d domain] -o owner [-g|-u|-w]

[Description]

The correct mpchown command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]mpchown -t target [-d domain] -o owner [-g|-u]

[Description]

The correct mpchown command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

'%1' does not exist.

[Description]

The specified user does not exist.

[Parameter]

%1: User name

[System Action]

Aborts processing.

[User Response]

Specify the correct user name and execute the command again.

Could not change owner.

[Description]

The owner could not be changed.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

mkbat [-d|-j] [-b] -f filename [-r parent] [-x] [-c]

[Description]

The correct mkbat command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

Could not create '%1'

[Description]

A file could not be created because the specified file could not be opened.

[Parameter]

%1: File name

[System Action]

Aborts processing.

[User Response]

Specify the correct file name and execute the command again.

[Windows]Failed to get name of Administrator

[Description]

The Administrator user name could not be obtained from the system.

[System Action]

Aborts processing.

[System Administrator Response]

Review the Administrator user settings on the system.

[UNIX]Failed to get name of root user

[Description]

The Administrator user name could not be obtained from the system.

[System Action]

Aborts processing.

[System Administrator Response]

Review the Administrator user settings on the system.

Failed to get user information.

[Description]

An attempt to obtain registered user information from the system has failed.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

Failed to open file(%1)

[Description]

Access control information relating to the project could not be read because an attempt to open the ACL Manager definition file has failed.

[Parameter]

%1: File name

[System Action]

Aborts processing.

[System Administrator Response]

Check for the following problem, and take action as necessary.

• Even though Systemwalker Centric Manager has not been installed, an attempt may have been made to look up the Systemwalker Centric Manager definition file. Check whether Systemwalker Centric Manager has been installed. If not installed, specify an option that is applicable to Systemwalker Operation Manager only, and then rerun the command.

  For example, if the mkbat command was executed without specifying the "-j" option when Systemwalker Centric Manager did not exist, execute the command again with the "-j" option specified.

• The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

Failed to read file(.%1)

[Description]

Access control information relating to the project could not be read because an attempt to read the ACL Manager definition file has failed.

[Parameter]

%1: File name

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

Failed to allocate memory

[Description]

Failed to get memory.

[System Action]

Aborts processing.

[System Administrator Response]

Either increase additional physical memory or change the swap settings.

Failed to get owner information

[Description]

An attempt to get owner information has failed.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[Windows]usage: mpaclcls [-u [-s { 0 - 9 }] ] | [-s { 0 - 9 } [-w]] shared-directory

[Description]

The correct mpaclcls command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]usage: mpaclcls [-u] [-s { 0 - 9 }]

[Description]

The correct mpaclcls command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

Cannot access to the shared directory.

[Description]

An attempt to access the shared disk has failed.

[System Action]

Aborts processing.

[System Administrator Response]

Check that the shared disk is mounted correctly.

usage: mpcssave [-s { 0 - 9 }]

[Description]

The correct mpcssave command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

Failed to transfer the security information.(%1:%2)

[Description]

The process used to back up access control information to a shared disk has failed.

[Parameter]

%1: Error code

%2: Detail code

[System Action]

Aborts processing.

[System Administrator Response]

Check that the shared disk is mounted correctly.

usage: mplstacluser [-s subsystem-no]

[Description]

The correct mplstacluser command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

Internal error. code: %1, %2

[Description]

Internal error has occurred.

[Parameter]

%1: Error code

%2: Detail code

[System Action]

Aborts processing.

[System Administrator Response]

Collect the information about server functions by using the Maintenance Information Collection Tool, and contact Fujitsu technical support.

Invalid argument.

[Description]

An argument was specified incorrectly.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

Insufficient Memory.

[Description]

Failed to get memory.

[System Action]

Aborts processing.

[System Administrator Response]

Check if the system has sufficient memory (and resources).

[UNIX]usage: mpsetusermode -s { on | off }

[Description]

The correct mpsetusermode command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]Failed to create process list file.

[Description]

The operational status of the Systemwalker Operation Manager daemons could not be verified because process information could not be obtained from the system.

[System Action]

Aborts processing.

[System Administrator Response]

Collect the information about server functions by using the Maintenance Information Collection Tool, and contact Fujitsu technical support.

[UNIX]Failed to check process.

[Description]

The operational status of the Systemwalker Operation Manager daemons could not be verified because process information could not be read.

[System Action]

Aborts processing.

[System Administrator Response]

Collect the information about server functions by using the Maintenance Information Collection Tool, and contact Fujitsu technical support.

[UNIX]Systemwalker Operation Manager is running.

[Description]

The status of the Extended User Management function could not be changed to enabled or disabled because the Systemwalker Operation Manager daemons were running.

[System Action]

Aborts processing.

[User Response]

Stop the Systemwalker Operation Manager daemons and then execute the command again.

[UNIX]Failed to set user mode.

[Description]

The status of the Extended User Management function could not be switched to enabled or disabled.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]Failed to set access rights.

[Description]

Access rights could not be set.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]usage: mpadduser -o OS-username [-d description] [-a] username

[Description]

The correct mpadduser command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]The user name must be specified within 20 bytes.

[Description]

The Operation Manager user name specification is too long.

[System Action]

Aborts processing.

[User Response]

Specify an Operation Manager user name that is no longer than 20 bytes.

[UNIX]It's not allowed to add 'root' user.

[Description]

The Operation Manager user name 'root' cannot be specified because it is created by the system at installation time.

[System Action]

Aborts processing.

[User Response]

Specify a name other than 'root' and execute the command again.

[UNIX]Specified user name includes unusable characters.

[Description]

The character string specified as the Operation Manager user name contains one or more invalid characters.

[System Action]

Aborts processing.

[User Response]

Specify correct characters in the Operation Manager user name and execute the command again.

[UNIX]Failed to add user.

[Description]

The Operation Manager user could not be added.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]Failed to check the uid of '%1'

[Description]

The process used to check the Administrator privileges of the specified OS user has failed.

[Parameter]

%1: User name

[System Action]

Aborts processing.

[System Administrator Response]

Collect the information about server functions by using the Maintenance Information Collection Tool, and contact Fujitsu technical support.

[UNIX]It's not allowed to specify a super-user for an unprivileged user.

[Description]

When registering a non-administrator as an Operation Manager user, the name of a system administrator (superuser) cannot be specified as an OS user.

[System Action]

Aborts processing.

[User Response]

To register a non-administrator, specify a general user name as an OS user name.

[UNIX]Specify a super-user for a privileged user.

[Description]

When registering an administrator as an Operation Manager user, a general user name cannot be specified as an OS user name.

[System Action]

Aborts processing.

[User Response]

To register an administrator, specify the name of a system administrator (superuser) as an OS user name.

[UNIX]'%1' is already in use.

[Description]

The specified Operation Manager user name is already registered.

[Parameter]

%1: User name

[System Action]

Aborts processing.

[User Response]

Specify an Operation Manager user name that has not been registered, and execute the command again.

[UNIX]usage: mpdeluser username [username ...] | -all

[Description]

The correct mpdeluser command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]Internal error occurred.
(Failed to create a file of process list.)

[Description]

The operational status of the Systemwalker Operation Manager daemons could not be verified because process information could not be obtained from the system.

[System Action]

Aborts processing.

[System Administrator Response]

Collect the information about server functions by using the Maintenance Information Collection Tool, and contact Fujitsu technical support.

[UNIX]Internal error occurred.
(Failed to check a process.)

[Description]

The operational status of the Systemwalker Operation Manager daemons could not be verified because process information could not be read.

[System Action]

Aborts processing.

[System Administrator Response]

Collect the information about server functions by using the Maintenance Information Collection Tool, and contact Fujitsu technical support.

[UNIX]It's not allowed to delete 'root' user.

[Description]

The user name 'root' cannot be deleted.

[System Action]

Aborts processing.

[User Response]

Specify a user other than 'root' and execute the command again.

[UNIX]usage: mpmoduser -o OS-username | -d description username

[Description]

The correct mpmoduser command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]Failed to modify user.

[Description]

The Operation Manager user could not be changed.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]Failed to check the privilege of '%1'.

[Description]

The process used to check the Administrator privileges of the specified Operation Manager user has failed.

[Parameter]

%1: User name

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]usage: mpsetpasswd [-d] username

[Description]

The correct mpsetpasswd command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]The password you specified is not long enough.
The password must contain at least 5 bytes of characters.

[Description]

The password is too short. Specify a character string at least 5 bytes long.

[System Action]

Aborts processing.

[User Response]

Specify a character string between 5 and 50 bytes long as the password.

[UNIX]The password must be specified within 50 bytes.

[Description]

The password is too long. Specify a character string no longer than 50 bytes as the password.

[System Action]

Aborts processing.

[User Response]

Specify a character string between 5 and 50 bytes long as the password.

[UNIX]Specified password includes unusable characters.

[Description]

The character string specified as the password contains characters that cannot be used.

[System Action]

Aborts processing.

[User Response]

Specify the correct password and execute the command again.

Refer to the Systemwalker Operation Manager Reference Guide for information about the characters that can be used in passwords.

[UNIX]Failed to delete password.

[Description]

The password could not be deleted.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]Failed to make crypto password.

[Description]

The password could not be encrypted.

[System Action]

Aborts processing.

[System Administrator Response]

Collect the information about server functions by using the Maintenance Information Collection Tool, and contact Fujitsu technical support.

[UNIX]Failed to set password.

[Description]

The password could not be set.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]usage: mpusers [-a]

[Description]

The correct mpusers command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]Failed to list user.

[Description]

The Operation Manager user information list could not be obtained.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]Failed to convert into UTF-8 code.

[Description]

The Operation Manager user name, OS user name, or the description could not be converted to UTF-8 encoding.

[System Action]

Aborts processing.

[System Administrator Response]

The Operation Manager user information may contain one or more characters in the wrong code. Review the Operation Manager user definitions.

[UNIX]Failed to convert into EUC code.

[Description]

The Operation Manager user name, OS user name, or the description could not be converted to EUC encoding.

[Parameters]

Aborts processing.

[System Administrator Response]

The Operation Manager user information may contain one or more characters in the wrong code. Review the Operation Manager user definitions.

[UNIX]usage: mpsetupolmode -u { clear | keep }

[Description]

The correct mpsetupolmode command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]Failed to set user policy distribution mode.

[Description]

The Operation Manager user policy distribution method specified in the mpsetupolmode command could not be set.

[System Action]

Aborts processing.

[System Administrator Response]

The ACL Manager definition file may be damaged. Either restore the ACL Manager definition file from a backup or reinstall Systemwalker Operation Manager.

[UNIX]usage: mpprjcmdacl [-s { 0 - 9 }] projectname

[Description]

The correct mpprjcmdacl command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[UNIX]'%1' does not exist.

[Description]

The specified project does not exist.

[Parameters]

%1: Project name

[System Action]

Aborts processing.

[User Response]

Specify the correct project name and execute the command again.

[UNIX]usage: mpmkpwbat [-c] [-u username] -f filename

[Description]

The correct mpmkpwbat command syntax is shown.

[System Action]

Aborts processing.

[User Response]

Specify command parameters in the correct format.

[Windows]ACL Manager: WARNING: 20: Failed to load the audit log library.

See "2.1 Messages Starting with ACL Manager".

[UNIX]MpFwsec: WARNING: 00020: Failed to load the audit log library.

See "2.6 Messages Starting with MpFwsec".

[Windows]ACL Manager: WARNING: 21: Failed to read the audit log file.

See "2.1 Messages Starting with ACL Manager".

[UNIX]MpFwsec: WARNING: 00021: Failed to read the audit log file.

See "2.6 Messages Starting with MpFwsec".