This section describes the messages output by commands for the Master Schedule Management function.
[Description]
Cancelling schedule information on the operation day "yyyymmdd" was requested.
[Parameter]
yyyymmdd: Date
[System Action]
Process continues.
[Description]
Schedule information on the operation day "yyyymmdd" was deleted normally.
[Parameter]
yyyymmdd: Date
[System Action]
Terminates processing normally.
[Description]
The executed command was completed normally.
[Parameter]
XXXX: Command name
[System Action]
Terminates processing normally.
[Description]
An operation change was canceled successfully during schedule cancel processing.
[System Action]
Terminates processing normally.
[Description]
The specified project has been deleted successfully.
[System Action]
Terminates processing normally.
[Description]
The specified project has been set as a master.
[System Action]
Terminates processing normally.
[Description]
The master setting the project was released normally.
[System Action]
Terminates processing normally.
[Description]
Schedule information, which exceeds the upper limit of projects at registration of the schedule, is not found.
[System Action]
Terminates processing normally.
[Description]
IP address setting was completed normally.
[System Action]
Terminates processing normally.
[Description]
Failed to delete schedule information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Parameter]
XXXX: Server name
[System Action]
Aborts processing.
[System Administrator Response]
Eliminate the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location". After this, on the Master Schedule Management [Status Summary] or Master Schedule Management [Status Details] window, cancel the schedule or execute the schedule management command using the cancel option with the operation date specified.
[Description]
An error occurred while deleting schedule information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Parameter]
yyyymmdd: Date
[System Action]
Aborts processing.
[System Administrator Response]
Eliminate the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location". After this, on the Master Schedule Management [Status Summary] or Master Schedule Management [Status Details] window, cancel the schedule or execute the schedule management command using the cancel option with the operation date specified.
[Description]
Re-scheduling can be specified only in a future date. It is not available for the current or past date.
[Parameter]
yyyymmdd: Date
[System Action]
Aborts processing.
[Description]
Re-scheduling causes schedule information to be recreated; therefore, it cannot be executed if no schedule information is created.
[Parameter]
yyyymmdd: Date
[System Action]
Aborts processing.
[System Administrator Response]
Schedule the operation in the Master Schedule Management [Status Summary] window or Master Schedule Management [Status Details] window, or execute the schedule management command with an operation date specified.
[Description]
Only a future schedule or the current or past wrong schedule can be canceled. The applied schedule information cannot be canceled.
[Parameter]
yyyymmdd: Date
[System Action]
Aborts processing.
[Description]
Requested to cancel the undefined schedule information.
[Parameter]
yyyymmdd: Date
[System Action]
Aborts processing.
[Description]
An invalid schedule cannot be canceled if it is already applied to some projects.
[Parameter]
XXXX: Server name
[System Action]
Aborts processing.
[System Administrator Response]
Delete the projects to which the schedule was already applied (back up them as required). After this, on the Master Schedule Management [Status Summary] or Master Schedule Management [Status Details] window, cancel the schedule or execute the schedule management command using the cancel option with the operation date specified.
[Description]
Failed to cancel the operation change of master information when executing the schedule cancel command. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location". After this, on the Master Schedule Management [Status Summary] or Master Schedule Management [Status Details] window, cancel the schedule or execute the schedule management command using the cancel option with the operation date specified.
[Description]
The subsystem to specify the IP address was not found.
[System Action]
Performed no processing.
[System Administrator Response]
Check whether there is a subsystem set to "Daily schedule management" or " Daily schedule management (Test mode)" mode, or whether the specified scheduler server exists. Then re-execute the master schedule management environment setting command.
[Description]
The job net information that satisfies the specified condition is not found.
[System Action]
Terminates processing normally.
[User Response]
Check the specified conditions and access privileges for the project.
[Description]
The job net log information that satisfies the specified condition is not found.
[System Action]
Terminates processing normally.
[User Response]
Check the specified conditions and access privileges for the project.
[Description]
The option specified in the command is defined in an invalid syntax.
[Parameter]
XXXX: usage
[System Action]
Aborts processing.
[User Response]
Check how the option is specified. For information on the option specification method, see the Systemwalker Operation Manager Reference Guide.
[System Administrator Response]
Check how the option is specified. For information on the option specification method, see the Systemwalker Operation Manager Reference Guide.
[Description]
System administrator's privileges are required to execute the command.
[System Action]
Aborts processing.
[Description]
Cannot preset a new operation change because the previous one is not completed.
[Parameter]
XXXX: Project name
[System Action]
Aborts processing.
[System Administrator Response]
Complete the schedule on the operation day when the error occurred, and re-execute the operation change preset command.
[Description]
Failed to preset an operation change when executing the operation change preset command. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the operation change preset command.
[Description]
The operation change project specified in the unchanged release day is not found during execution of the operation change release day change command.
[System Action]
Aborts processing.
[System Administrator Response]
Check the specified release day, and re-execute the operation change release day change command.
[Description]
Operation change preset command
The operation change project is already defined in the release day specified with the operation change preset command.
Operation change release day change command
The operation change project specified in the changed release day is defined to execute the operation change release day change command; therefore, change processing failed.
[System Action]
Aborts processing.
[System Administrator Response]
Operation change preset command
The operation change project is already generated; therefore, perform information change processing in the project.
Operation change release day change command
Check the specified release day, and re-execute the operation change release day change command.
[Description]
Failed to change the release day when executing the operation change release day change command. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the operation change release day change command.
[Description]
Cannot cancel the operation change because the operation change process was not completed.
[Parameter]
XXXX: Project name
[System Action]
Aborts processing.
[System Administrator Response]
Complete the schedule on the operation day when the error occurred, and re-execute the operation change cancel command.
[Description]
Operation change information is not reflected on master information in the specified release day when executing the operation change cancel command.
[System Action]
Aborts processing.
[System Administrator Response]
Check the specified release day, and re-execute the operation change cancel command.
[Description]
Failed to cancel the operation change of master information when executing the operation change cancel command. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the operation change cancel command.
[Description]
A project other than the master project or operation change project is specified.
[System Action]
Aborts processing.
[System Administrator Response]
Check whether the specified project exists. Use the project master setting command to set the project as a master, and then retry operation.
[Description]
Failed to read project information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
Failed to read job net information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Parameter]
XXXX: Project name
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
Failed to write job net information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
Failed to read group information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
Failed to write group information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
Failed to read job extension information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
Failed to write job extension information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
Failed to check the operation change information file. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
The specified command was not executed because the code system of the user environment (the value of the LANG environment variable) to execute the command for the Master Schedule Management function did not match the language type of the Systemwalker Operation Manager daemon that was specified during installation of Systemwalker Operation Manager.
[System Action]
Aborts processing.
[System Administrator Response]
Change the set the value of the LANG environment variable so that the code system of the user environment (LANG environment variable) matches the language type of Systemwalker Operation Manager.
[Description]
The specified LANG value is not found in the system.
[System Action]
Aborts processing.
[System Administrator Response]
Specify the correct LANG value.
[Description]
Cannot use the Master Schedule Management function because the Jobscheduler service/daemon stops.
[System Action]
Aborts processing.
[System Administrator Response]
Start the Jobscheduler service/daemon.
[Description]
Cannot use the Master Schedule Management function because the Jobscheduler service/daemon is in process of the start command.
[System Action]
Aborts processing.
[System Administrator Response]
After the Jobscheduler service/daemon was started, re-execute the command.
[Description]
The process failed because a message event, which was based on the operation day, occurred. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
Note also that the -dx, -n and -s options cannot be used for the network jobs and distributed execution jobs that are registered in the schedule by dates project and the jobs that are not registered in the schedule by dates project.
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
The user privilege information could not be obtained.
[System Action]
Aborts processing.
[User Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
The specified project is not found.
[System Action]
Aborts processing.
[System Administrator Response]
Check whether the specified project name is correct.
[Description]
Failed in initialization to execute the command. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
Failed to delete the project. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
Failed to register and update project information. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
The master project name must be specified within 15 bytes, where the last five bytes do not contain symbol "+" or "=" as well as four digits.
[System Action]
Aborts processing.
[Description]
Failed to suppress the schedule to set a project master. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
Failed to cancel the set project master. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
Failed to load the ACL manager's library to check the access privileges of the project.
[System Action]
Aborts processing.
[System Administrator Response]
Check whether the following file is found. If found, the file may be destroyed. Reinstall Systemwalker Operation Manager.
Systemwalker installation directory\mpwalker\bin\f3crsapi.dll
/opt/systemwalker/lib/libmpfwsecjm.so
/opt/systemwalker/lib/libmpfwsecjm.sl
[Description]
A group in the specified project is subjected to operation request or saving of definition information.
[System Action]
Aborts processing.
[System Administrator Response]
After the group under operation or saving was ended, re-execute the command.
[Description]
A group in the specified project is running.
[System Action]
Aborts processing.
[System Administrator Response]
After the running group was ended, re-execute the command.
[Description]
A job net in the specified project is subjected to operation request or saving of definition information.
[System Action]
Aborts processing.
[System Administrator Response]
After the job net under operation or saving was ended, re-execute the command.
[Description]
A job net in the specified project is running.
[System Action]
Aborts processing.
[System Administrator Response]
After the running job net was ended, re-execute the command.
[Description]
The project cannot be deleted when the specified project contains a carried over job net that is not completed.
[System Action]
Aborts processing.
[System Administrator Response]
Disable the carried over job net, and re-execute the command.
[Description]
The Master Schedule Management function is not installed normally.
[System Action]
Aborts processing.
[System Administrator Response]
Reinstall Systemwalker Operation Manager.
[Description]
The master schedule management environment is not set up.
[System Action]
Aborts processing.
[System Administrator Response]
Set up the master schedule management environment on the Master Schedule Management Environment Setup dialog box and try again.
[Description]
Any Systemwalker Operation Manager subsystem is not created, or the Jobscheduler is not installed normally.
[System Action]
Aborts processing.
[System Administrator Response]
Create a subsystem, or reinstall Systemwalker Operation Manager.
[Description]
Cannot access the subsystem environment. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
Failed to obtain the saved schedule information because the project exceeded the upper limit. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
If Systemwalker Operation Manager users are limited to set up the Systemwalker Operation Manager environment, the command execution user need to belong to the swadmin group.
[System Action]
Aborts processing.
[User Response]
Assign the command execution user to the swadmin group, and re-execute the command.
[Description]
The master schedule management environment is not configured.
[System Action]
Aborts processing.
[Description]
The master schedule management environment is not configured normally. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[Description]
Cannot assign the IP address because an error occurred during setup of the master schedule management environment.
[System Action]
Aborts processing.
[System Administrator Response]
Check the environment on the Master Schedule Management Environment Setup dialog box. If "Invalid settings" is displayed in the mode, re-specify the mode to reconfigure the environment, and re-execute the command.
[Description]
"Daily schedule management" or "Daily schedule management (Test mode)" is not defined in the mode of the specified subsystem.
[System Action]
Aborts processing.
[System Administrator Response]
Check the mode of the subsystem to be executed, and re-execute the command.
[Description]
The specified scheduler server is not found.
[System Action]
Aborts processing.
[System Administrator Response]
Check the schedule server name to be specified, and then re-execute the command.
[Description]
The specified IP address is already assigned to the schedule server.
[System Action]
Aborts processing.
[System Administrator Response]
Check the IP address to be specified, and then re-execute the command.
[Description]
The specified IP address is already assigned to a management server.
[System Action]
Aborts processing.
[System Administrator Response]
Check the IP address to be specified, and then re-execute the command.
[Description]
Failed to assign the IP address. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
This command can be executed only on the management server.
[System Action]
Aborts processing.
[System Administrator Response]
Execute the command on the management server.
[Description]
The master project name that contains symbol "+" or "=" and four digits in the last five bytes cannot be canceled.
[System Action]
Aborts processing.
[Description]
Cannot change the operation change release day because the operation change failed on the unchanged release day that was specified.
[System Action]
Aborts processing.
[System Administrator Response]
On the Master Schedule Management [Status Summary] or Master Schedule Management [Status Details] window, cancel the schedule or execute the schedule management command with -del specified to cancel the schedule of the operation day that caused the error. After this, change the operation change release day.
[Description]
The log information (jobdb1.log, jobdb2.log and jobdb3.log files locating under the Jobscheduler database directory) does not exist. The log information may have been just switched or the job net has not been started yet.
[System Action]
Aborts processing.
[User Response]
To refer to the log information before being switched, use an editor to refer to the previous log.
[Description]
No access privileges could be obtained.
[System Action]
Aborts processing.
[User Response]
Collect the information by using the Maintenance Information Collection Tool, and contact your Fujitsu engineer.
[Description]
One of the phenomena below occurred.
The specified project does not exist.
The user has no access privileges to the specified project.
No job net or group has been registered in the specified project.
[Parameter]
XXXX: Project name.
[System Action]
Aborts processing.
[User Response]
Make sure that the specified project exists and that the correct access privileges have been set to the project. Also, make sure that the specified job net or group has been registered in the project.
[Description]
Failed to read log information (jobdb1.log, jobdb2.log and jobdb3.log files locating under the Jobscheduler database directory) because the system function returned an invalid return value. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the command.
[Description]
A child job net cannot be specified.
[System Action]
Aborts processing.
[System Administrator Response]
It is not permitted to submit only a child sub net. Execute the command again by specifying a parent job net.
[Description]
A job net in a group cannot be specified.
[System Action]
Aborts processing.
[System Administrator Response]
It is not permitted to submit a job net in a group.
[Description]
The job net is not registered in the specified project.
[System Action]
Aborts processing.
[System Administrator Response]
Check the specified job net and re-execute the command by specifying a job net that is registered in the project.
[Description]
The job net has already been registered in the schedule by dates project.
[System Action]
Aborts processing.
[System Administrator Response]
Delete the job net in the schedule by dates project and re-execute the command. Alternately, modify the job net in the schedule by dates project manually.
[Description]
A schedule cannot be created due to an error that occurred during creation or cancellation of schedule information.
[System Action]
Aborts processing.
[System Administrator Response]
Remove the schedule information cancellation failure condition or the error, and re-execute the command.
[Description]
The specified process date is not set as a job net startup day.
[System Action]
Aborts processing.
[System Administrator Response]
Register the target process date as a job net startup day and re-execute the command.
[Description]
A process date cannot be specified if no schedule information has been created for it.
[System Action]
Aborts processing.
[System Administrator Response]
Execute the schedule using the Master Schedule Management [Status Summary] or Master Schedule Management [Status Details] window. Alternately, execute the schedule management command by specifying the process date to create the schedule information for it, and then re-execute the command.
[Description]
The job net submission command cannot be started if it has already been started.
[System Action]
Aborts processing.
[System Administrator Response]
Re-execute the command after the running job net submission command is terminated.
[Description]
An error occurred in the environment for submitting the job net. The detailed information on this error is output to the Schedule Distribution function detailed error information file. So refer to this file and eliminate the error cause. For more information about this file, refer to "Content output in the Master Schedule Management function detailed error information file and its storage location".
[System Action]
Aborts processing.
[System Administrator Response]
Remedy the error cause by referring to "Content output in the Master Schedule Management function detailed error information file and its storage location", and re-execute the job net submission command.
[Description]
An option not supported by the version and level installed on the specified host was specified.
[Parameter]
XXXX: Specified host name
[System Action]
Aborts processing.
[System Administrator Response]
Check the version of the specified host and review the command and its parameters accordingly. Run the command again after changing the parameters to suitable values.
[Description]
Neither master linked job net nor linked job net can be specified.
[System Action]
Aborts processing.
[System Administrator Response]
Cannot submit a master linked job net.
Cannot submit a linked job net singly. Specify a parent job net, and then re-execute the command.
