ETERNUS SF Express 15.1/ Storage Cruiser 15.1/ AdvancedCopy Manager 15.1 メッセージ説明書

FJSVrcx:INFO:21105:server_name:server node status is changed to status

FJSVrcx:INFO:21111:server_name:server registration succeeded

FJSVrcx:INFO:21113:service_name:status is changed to status

FJSVrcx:INFO:21115:site manager started

FJSVrcx:INFO:21121:site manager stopped

FJSVrcx:INFO:27700:command:primary node setup completed

FJSVrcx:INFO:27701:command:secondary node setup completed

FJSVrcx:INFO:27702:command:primary node deletion completed

FJSVrcx:INFO:27703:command:secondary node deletion completed

FJSVrcx:INFO:27733:command:canceled

FJSVrcx:INFO:27751:command:cluster deletion (erase shared disk data) completed

FJSVrcx:INFO:27753:command:cluster deletion (force mode) completed

FJSVrcx:INFO:27800:command:The command was cancelled.

FJSVrcx:INFO:27801:command:The command was successfully completed.

FJSVrcx:INFO:27802:command:CLI crypt key successfully changed

FJSVrcx:INFO:27804:command_name1:The command was successfully completed.

FJSVrcx:INFO:29101:test event generated

FJSVrcx:INFO:29301:ServerRM daemon started.

FJSVrcx:INFO:29302:ServerRM daemon terminated.

FJSVrcx:INFO:29303:SNMPTrap daemon started.

FJSVrcx:INFO:29304:SNMPTrap daemon terminated.

29901:テスト通報を行いました。しばらくすると、イベントログビューに以下のメッセージが表示されます。FJSVrcx:INFO:29101:test event generated

29912:LEDは点灯しています。

29913:LEDは消灯しています。

FJSVrcx:WARNING:41105:failed to get the server information from server_name

FJSVrcx:WARNING:41106:failed to get the storage information

FJSVrcx:WARNING:41109:failed to get the information of category

FJSVrcx:WARNING:41303:server_name:server node status is changed to status

FJSVrcx:WARNING:47101:command:filename:permission denied

FJSVrcx:WARNING:47102:command:filename:insecure permission

FJSVrcx:WARNING:47103:command:filename:invalid file format

FJSVrcx:WARNING:47104:command:filename:invalid file type

FJSVrcx:WARNING:47752:command:cluster deletion (force mode) completed excluding erase shared disk data

49804:管理対象サーバノードより構成情報が取得できませんでした。しばらく待ってから、再度、操作を行ってください。

49805:表示情報が最新の情報ではない可能性があります。しばらく待ってから、最新の情報に更新を行ってください。

49806:故障状態の回復が行えない状態です。しばらく待ってから、再度、故障状態の回復を行ってください。

49808:指定された管理対象サーバノードが存在しません。

49851:プラグインの読み込みに失敗しました。インストールが正しく行われていることを確認してください。

49852:plug-in_name の読み込みに失敗しました。インストールが正しく行われていることを確認してください。

49853:plug-in_name (バージョン:version )の読み込みに失敗しました。インストールが正しく行われていることを確認してください。

49854:リソースファイル(パス:path_name)の取得に失敗しました。

49855:マシン依存情報ファイルの読み込みに失敗しました。

49901:入力したデータに不正があります。詳細情報

49912:選択している装置情報を削除してもよろしいですか。

49915:同一名称の登録装置が存在するため登録できません。

49919:[装置選択]で選択した装置はすでに登録されています。

FJSVrcx:ERROR:61102:command:already running

FJSVrcx:ERROR:61104:command:failed to start mgr_name. code=%1

FJSVrcx:ERROR:61105:command:obj:not mounted on a shared disk

FJSVrcx:ERROR:61111:failed to start site manager. code=%1

FJSVrcx:ERROR:61112:failed to get the site manager information due to %1

FJSVrcx:ERROR:61121:server_name:server node status is changed to status

FJSVrcx:ERROR:61122:service_name:status is changed to status

FJSVrcx:ERROR:61130:stopping of site manager failed

FJSVrcx:ERROR:61131:site manager terminated abnormally

FJSVrcx:ERROR:62000:command:Unexpected Error occurred.

FJSVrcx:ERROR:62001:command:Internal Program Error occurred.

FJSVrcx:ERROR:62002:command:Communication error occurred. (node)

FJSVrcx:ERROR:62005:command:The node is not registered. node

FJSVrcx:ERROR:62006:command:There is(are) the device(s) of abnormal status. node

FJSVrcx:ERROR:62010:command:management database access error

FJSVrcx:ERROR:62012:command:The management database is inconsistent.

FJSVrcx:ERROR:62062:The setup to storage was interrupted.An error occurred in processing request to storage.

FJSVrcx:ERROR:62063:failed to change storage setting.

FJSVrcx:ERROR:62064:Storage Configuration error detected.

65509:復旧不可能なエラーが発生しました。

65510:内部矛盾が発生し、登録処理に失敗しました。

65514:運用管理サーバとの接続に失敗しました。最新の情報に更新できません。

65515:運用管理サーバからの情報獲得に失敗しました。最新の情報に更新できません。

65518:product_name はインストールされていないため呼び出せません。

65519:product_name の呼び出しに失敗しました。

65522:使用不可能な文字が指定されています。(item_name) を変更してください。

65523:必要な設定項目が指定されていません。(item_name) を入力してください。

65524:特権管理者でないため操作できません。

65583:リモートコマンドが異常終了しました。

65584:リモートコマンドを実行できませんでした。

65585:リモートコマンド実行の前処理に失敗しました。リモートコマンドは実行されませんでした。

65605:管理対象サーバノードを登録できませんでした。

65606:管理対象サーバノードを削除できませんでした。

65800:登録用のパスワード情報が間違っています。もう一度確認したうえで入力してください。

65801:登録パスワード又は確認パスワード情報が入力されていません。

65802:ユーザ名が入力されていません。

65803:アカウントの現在のパスワード情報が間違っています。もう一度確認したうえで入力してください。

65804:ユーザ名に空白文字は使用できません。

65805:入力されていないパスワード情報があります。

65807:ログインアカウント (login_account_name) は登録されていません。FJSVrcx:ERROR:65807:command:The login account (login_account_name) has not been registered.

65808:サイズ size に対して指定したインデックスは index です。FJSVrcx:ERROR:65808:command:The index specified for size size is index.

65811:認証失敗: ログインアカウント(login_account_name)FJSVrcx:ERROR:65811:command:Certification failure: login account (login_account_name)

65814:パスワードの復号化に失敗しました。FJSVrcx:ERROR:65814:command:Decoding the password failed.

65815:パスワードの暗号化に失敗しました。FJSVrcx:ERROR:65815:command:Encoding the password failed.

65817:予期しないエラーを検出しました: errorFJSVrcx:ERROR:65817:command:An unexpected error has been detected: error

65818:実行例外が発生しました。FJSVrcx:ERROR:65818:command:The execution exception was generated.

65821:parameter 内にノードが存在します。処理を続行できません。FJSVrcx:ERROR:65821:command:A node exists in parameter. Processing cannot be continued.

65822:予期しないエラーを検出しました: errorFJSVrcx:ERROR:65822:command:An unexpected error has been detected: error

65823:実行例外が発生しました。FJSVrcx:ERROR:65823:command:The execution exception was generated.

65824:parameter (parameter_name) が未入力です。FJSVrcx:ERROR:65824:command:parameter (parameter_name) is not provided.

65825:parameter (parameter_name : 文字長 == length) の文字数の許容値は下限値 (lower_limit)上限値 (upper_limit) です。FJSVrcx:ERROR:65825:command:The number of characters of parameter (parameter_name :length == length ) ranges from (lower_limit) at a minimum to (upper_limit) at a maximum.

65826:parameter (parameter_name) に許容文字でない値が含まれています。FJSVrcx:ERROR:65826:command:parameter (parameter_name) includes an invalid character.

65827:item (input_value) は、(value) の値のみ有効です。FJSVrcx:ERROR:65827:command:input_value is invalid. (value) is only effective to item.

65828:list 内の要素型が不正です。 (想定値 : value1, 検出値 :value2 )FJSVrcx:ERROR:65828:command:The element type in list is invalid. (Assumption value:value1, Detection value:value2 )

65829:list1 リスト (サイズ ==integer_variable1 ) と list2 リスト (サイズ == integer_variable2 ) の要素数が異なっています。FJSVrcx:ERROR:65829:command:The number of elements of list1 list (size == integer_variable1) and list2 list (size == integer_variable2) is different.

FJSVrcx:ERROR:67101:command:not privileged

FJSVrcx:ERROR:67102:command:option:illegal option

FJSVrcx:ERROR:67105:command:obj:no such service

FJSVrcx:ERROR:67106:command:obj:name contains invalid character

FJSVrcx:ERROR:67111:command:obj:no such event

FJSVrcx:ERROR:67112:command:no resources found matching obj

FJSVrcx:ERROR:67114:command:can not copy file [filename1->filename2]

FJSVrcx:ERROR:67117:command:obj:failed to create file or directory

FJSVrcx:ERROR:67118:command:obj:can not mount file system

FJSVrcx:ERROR:67119:command:obj:command exec error

FJSVrcx:ERROR:67124:command:not enough memory

FJSVrcx:ERROR:67126:command:obj:No such directory

FJSVrcx:ERROR:67128:command:invalid date

FJSVrcx:ERROR:67129:command:syntax error

FJSVrcx:ERROR:67130:command:option:option requires an argument

FJSVrcx:ERROR:67131:command:option:argument too long

FJSVrcx:ERROR:67132:command:option:contains invalid character

FJSVrcx:ERROR:67133:command:value:out of range

FJSVrcx:ERROR:67134:command:value:invalid format

FJSVrcx:ERROR:67135:command:option:invalid argument

FJSVrcx:ERROR:67136:command:filename:invalid file format

FJSVrcx:ERROR:67139:command:filename:file not found

FJSVrcx:ERROR:67140:command:filename:permission denied

FJSVrcx:ERROR:67141:command:filename:write failed

FJSVrcx:ERROR:67142:command:filename:read failed

FJSVrcx:ERROR:67143:command:filename:open failed

FJSVrcx:ERROR:67144:command:filename:remove failed

FJSVrcx:ERROR:67145:command:filename:rename failed

FJSVrcx:ERROR:67146:command:filename:file not found

FJSVrcx:ERROR:67147:command:filename:permission denied

FJSVrcx:ERROR:67148:command:filename:write failed

FJSVrcx:ERROR:67149:command:filename:read failed

FJSVrcx:ERROR:67150:command:filename:open failed

FJSVrcx:ERROR:67151:command:filename:remove failed

FJSVrcx:ERROR:67152:command:filename:rename failed

FJSVrcx:ERROR:67157:command:obj:not privileged

FJSVrcx:ERROR:67158:command:too many type exist in obj

FJSVrcx:ERROR:67159:command:authentication failure

FJSVrcx:ERROR:67161:command:option:can not specify

FJSVrcx:ERROR:67162:command:option:is required

FJSVrcx:ERROR:67164:command:value:overlaps

FJSVrcx:ERROR:67165:command:obj:failed to register into the Management role

FJSVrcx:ERROR:67166:command:obj:failed to delete from the Management role

FJSVrcx:ERROR:67167:command:obj:contains type

FJSVrcx:ERROR:67168:command:obj1:is busy. Link to type(obj2) exists

FJSVrcx:ERROR:67195:command:communication error.code=code

FJSVrcx:ERROR:67196:command:communication error.detail

FJSVrcx:ERROR:67197:command:DB access error

FJSVrcx:ERROR:67200:command:obj:process was terminated because of error occurred on other node

FJSVrcx:ERROR:67251:command:command terminated abnormally

FJSVrcx:ERROR:67252:command:password decryption error

FJSVrcx:ERROR:67255:command:option:not supported

FJSVrcx:ERROR:67256:command:obj:process was terminated because of deleting the server node

FJSVrcx:ERROR:67263:command: user_name:login incorrect

FJSVrcx:ERROR:67264:command:filename:invalid file type

FJSVrcx:ERROR:67265:command:variable:value:invalid environment value

FJSVrcx:ERROR:67266:command:no shell

FJSVrcx:ERROR:67267:command:obj:failed to execute

FJSVrcx:ERROR:67268:command:filename:no such file or directory

FJSVrcx:ERROR:67269:command:filename:failed to create file or directory

FJSVrcx:ERROR:67704:command:option:secondary node deletion completed

FJSVrcx:ERROR:67706:command:ipaddress:invalid IP address format

FJSVrcx:ERROR:67707:command:setup command already running

FJSVrcx:ERROR:67709:command:not privileged

FJSVrcx:ERROR:67710:command:mountpoint:not mounted

FJSVrcx:ERROR:67711:command:software:not installed

FJSVrcx:ERROR:67714:command:nodetype: cluster setup already completed in this node

FJSVrcx:ERROR:67715:command:cluster setup already completed in another node

FJSVrcx:ERROR:67716:command:primary node setup not completed

FJSVrcx:ERROR:67717:command:switch:parameter:parameter conflict

FJSVrcx:ERROR:67725:command:option:illegal option

FJSVrcx:ERROR:67726:command:secondary node not deleted

FJSVrcx:ERROR:67727:command:no cluster setup node

FJSVrcx:ERROR:67740:command:cluster setup failed (setup data invalid)

FJSVrcx:ERROR:67741:command:setup command not installed

FJSVrcx:ERROR:67742:command:file:setup data inconsistency

FJSVrcx:ERROR:67743:command:setup data invalid

FJSVrcx:ERROR:67744:command:shared disk data invalid

FJSVrcx:ERROR:67745:command:property:manager:value:setup data conflict

FJSVrcx:ERROR:67747:command:cluster setup failed

FJSVrcx:ERROR:67748:command: can not execute in normal cluster setup node

FJSVrcx:ERROR:67749:command:cluster deletion failed

FJSVrcx:ERROR:67750:command:cluster deletion (erase shared disk data) failed

FJSVrcx:ERROR:67754:command:command not installed

FJSVrcx:ERROR:67755:command:network interface not found

FJSVrcx:ERROR:67800:command:Site manager process is still running.

FJSVrcx:ERROR:67801:command:package:not installed

FJSVrcx:ERROR:67802:command:file:open failed

FJSVrcx:ERROR:67803:command:file:write failed

FJSVrcx:ERROR:67804:command:failed to restore the configuration

FJSVrcx:ERROR:67805:command:rcxcert setup was not completed successfully.

FJSVrcx:ERROR:67806:command:rcxcert setup has already been completed.

FJSVrcx:ERROR:67807:command:option:illegal option

FJSVrcx:ERROR:67808:command_name1:The command was not completed successfully.

FJSVrcx:ERROR:67814:command_name1:It failed in the backup of AccountFile.

FJSVrcx:ERROR:67815:command_name1:Decoding the password failed.

FJSVrcx:ERROR:67816:command_name1:Encoding the password failed.

FJSVrcx:ERROR:67819:command_name1:It failed in the acquisition of the DB type.

FJSVrcx:ERROR:67820:command_name1:command_name2 process is still running.

FJSVrcx:ERROR:67830:command:rcxcert not setup

FJSVrcx:ERROR:67840:command:invalid input value(parameter)

67840 rcxcert:入力値が不正です。(parameter)

FJSVrcx:ERROR:67898:command:message:too long message

FJSVrcx:ERROR:67899:command:internal error

FJSVrcx:ERROR:67992:command:command2: timeout error

FJSVrcx:ERROR:67999:command:internal error, details.

FJSVrcx:ERROR:68204:command:filename: write failed

FJSVrcx:ERROR:68205:command:obj: can not create file or directory

FJSVrcx:ERROR:68209:command:filename: rename failed

FJSVrcx:ERROR:68212:command:filename: remove failed

FJSVrcx:ERROR:69101:failed to initialize the event report service

FJSVrcx:ERROR:69102:failed to send E-mail to address

FJSVrcx:ERROR:69103:failed to send SNMPTrap to host

FJSVrcx:ERROR:69106:failed to start the event report service

FJSVrcx:ERROR:69301:Failed to start ServerRM daemon.

FJSVrcx:ERROR:69302:The port number for ServerRM daemon is already in use.

FJSVrcx:ERROR:69303:The port number for SNMPTrap daemon is already in use.

FJSVrcx:ERROR:69304:An internal error occurred in ServerRM daemon.

FJSVrcx:ERROR:69305:An internal error occurred in SNMPTrap daemon.

FJSVrcx:ERROR:69306:Failed to execute command.

FJSVrcx:ERROR:69307:SNMPTrap daemon has stopped.

69811:故障状態の回復に失敗しました。

69814:運用管理サーバとの接続に失敗し、故障状態の回復が行えませんでした。

69815:運用管理サーバとの接続に失敗し、初期化処理に失敗しました。

69816:運用管理サーバで内部矛盾が発生し、初期化処理に失敗しました。

69817:予期しないエラーが発生しました:error

69818:運用管理サーバで予期しないエラーが発生しました。

69819:管理対象サーバノードの構成情報が不当な形式です。

69821:管理対象サーバノードより構成情報が取得できませんでした。

69851:メソッド(ID:id )が見つかりません。

69852:アクション(ID:id )が見つかりません。

69853:ポップアップメニュー(ID:id )の情報が見つかりません。

69859:マシン構成情報ファイルの読み込みに失敗しました。

69865:対象装置の取得に失敗しました。

69866:構成情報ツリーの生成に失敗しました。

69867:CSVファイルの作成に失敗しました。

69868:XMLファイルの作成に失敗しました。

69901:イベント通報設定情報の登録に失敗しました。

69902:イベント通報設定情報の読み込みに失敗しました。

69903:テスト通報に失敗しました。

69914:装置リストビューの構築中にエラーが発生しました。

69915:LED操作の実行に失敗しました。

ssage1001 user authority error

ssage1002 user definition registration is failed

ssage1003 specified key is not found

ssage1004 parameter error

ssage1005 user definition process is busy now

ssage1006 insufficient memory

ssage1007 command execution is failed

ssage1008 library loading is failed

ssage1009 library initialization is failed

1000 : Fyy s1 initialized.

1009 : Fyy s1 failed.

1009 : Fyy s1 is failed that CreateEvent() is abnormal.(rc=d1)

1204 : Fyy Diagnostic Error : (port=d1/bus=d2/tid=d3/lun=d4) s1 s2 ( d5 : s3 )

1205 : Fyy Diagnostic Error : (port=d1/bus=d2/tid=d3/lun=d4) s1 s2 ( d5 : s3 )

1206 : Fyy Status Error : (port=d1/bus=d2/tid=d3/lun=d4) sense code=d5, sub sense=d6, status=d7.

2000 : Fyy Configuration error: f=s1,s2=s3.

2005 : Fyy Configuration error: Fail to open agent registry subkey(s1).

2005 : Fyy Configuration error: Fail to read agent registry key(s1).

2005 : Fyy Configuration error: HBA(s1) driver registry key maybe wrong.

2005 : Fyy Configuration error: Invalid WWPN definition detected.

2005 : Fyy Configuration error: Invalid Trap-IP definition detected.Line(s1).

2005 : Fyy Configuration error: s1

2010 : Fyy An request failed for unmatch between deleting IP address(s1) and any registered one.

2014 : Fyy Configuration error: f=s1,s2

2015 : Fyy Illegal OS type(d1) detected.

2016 : Fyy Illegal OS Version(d1.d2) detected.

2105 : Fyy The TargetID(d1) is out of range.

2105 : Fyy (s1) exceeded limitation value (d1).

2200 : Fyy Parameter Error. check_flag=d1.

2200 : Fyy Parameter Error. Invalid IP Length(d1).

2200 : Fyy Parameter Error. Invalid Request Action(d1).

2200 : Fyy Parameter Error. s1

2203 : Fyy Invalid OID: s1 (d1).

2204 : Fyy Invalid value type=d1, (request=d2).

2205 : Fyy Invalid request=d1.

2206 : Fyy Request sequence is wrong. reason: s1

2207 : Fyy Path Type is wrong. reason: s1

2300 : Fyy Invalid IP(s1) address which is already added device.

2305 : Fyy Can not be set path, because hddv.conf exists.

3100 : Fyy System Error : s1 : [s2]

3101 : Fyy System Error : Some error has occurred in s1.

3101 : Fyy System Error : s1 : [s2] ( d1 : s3 )

3109 : Fyy Configuration file backup failed before Initialization. (s1)

3110 : Fyy Configuration file copy failed . (s1)

3111 : Fyy Registry backup failed before Initialization: file(s1) path(s2).

3112 : Fyy Error monitor could not start(IP Address : s1 ).

3200 : Fyy Internal contradiction.

3400 : Fyy Configuration file Modify Error : s1

00001 Server IP Address is s1

00002 agent is stopped

00003 agent is not started

10001：SSC Agent started.

11001：s1(Softek_StorageCruiser Agent) または 11001：s1(StorageCruiser Agent)

20001：SSC Agent failed to initialize.

20002：SSC Agent failed to analyze control text.

20003：SSC Agent abnormal end.

21001：s1 s2 (s3)

50001：Multipath setting instruction is executed.

ERROR:1010:There is no permission to perform this operation.

ERROR:1011:Syntax error occurred in parameters or arguments.

ERROR:1012:License ID, Serial Number, or License Key is incorrect.

ERROR:1020:The specified license information has been already registered.

ERROR:1021:The specified license information does not exist.

ERROR:1030:The specified IP address or host name cannot be found on network.

ERROR:1031:Logon failed. The specified user ID or password may be incorrect.

ERROR:1032: Registration of license information failed.

ERROR:1051:Registration of license information failed. Because prerequisite license is not exists

ERROR:1052:Registration of license information failed. Because exclusive license is exists<排他ライセンスID>

ERROR:1054:There are dependency licenses. Please remove dependency license before this license<依存ライセンスID>

ERROR:1061:Registration of license information failed. Because trial license is expired.

ERROR:1062:Registration of license information failed. Because trial license has been already registered.

ERROR:1063:Registration of license information failed. Because expired trial license has been already registered. Trial license can be registered only once.

ERROR:1099:An input parameter is incorrect.

ERROR:3030:The configuration of License Manager is invalid.

ERROR:5001:Reading license database failed.

ERROR:5002:Updating license database failed.

ERROR:7000:An unknown error occurred.

A1001 : Could not establish connection with SNMP Trap daemon/service

A1002 : Could not execute REMCS script

B1001 : Manager process abnormal end.

STXC0100 ERROR Specified command parameter is incorrect. Parameter=(PARAM).

STXC0101 ERROR REC buffer identifier does not exist.

STXC1000 ERROR Insufficient Snap Data Pool. Required capacity=(CAPACITY).

STXC1002 ERROR Invalid logical volume name. Volume name=(VOLNAME).

STXC1003 ERROR Logical volume is already defined in another copy operation.

STXC1004 ERROR Maximum session reached.

STXC1005 ERROR Another copy has already started.

STXC1006 ERROR Target volume is already defined in another copy operation.

STXC1007 ERROR Logical volume is already reserved.

STXC1008 ERROR Parameter is not specified.

STXC1009 ERROR Logical volume is busy.

STXC1010 ERROR Specified option is invalid.

STXC1011 ERROR Invalid parameter. Parameter=(PARAM).

STXC1013 ERROR Target volume size mismatch.

STXC1014 ERROR Target volume overlap source volume.

STXC1016 ERROR The group file of the form not permitted was specified.

STXC1017 ERROR The option that cannot be used for copy session is specified.

STXC1018 ERROR The copy protection cannot be set to Snap Data Volume.

STXC1019 ERROR The copy session other than EC or REC was specified.

STXC1020 ERROR Logical volume size is incorrect.

STXC1021 ERROR This ETERNUS is already defined in LAN interface.

STXC1022 ERROR This ETERNUS is already defined in SCSI interface.

STXC1023 ERROR The specification of user information is incorrect.

STXC1024 ERROR An error occurred during REC Buffer operation.

STXC1025 ERROR Unable to restore the copy session because the Concurrent OPC function is being used.

STXC1026 ERROR Unable to start the Concurrent OPC function.

STXC1027 ERROR The copy source logical volume contains invalid data.

STXC1028 ERROR RAID Migration is currently being performed.

STXC1029 ERROR Unable to start the Concurrent OPC function because of invalid parameter.

STXC1030 ERROR The number of specified copy sessions exceeds the maximum.

STXC1031 ERROR Failed to restore the copy session because the phase of the target session is readying.

STXC1032 ERROR Unable to start the Concurrent OPC function because the phase of the latest SnapOPC+ session is readying.

STXC1033 ERROR Unable to start the Concurrent OPC function because a restoration copy session exists.

STXC1034 ERROR The set Alias name for the option to specify the target to which the copy request is issued is not the copy source or is not the copy target.

STXC1035 ERROR The set Alias name for the option to specify the target to which the copy request is issued exists, but access path information does not exist.

STXC1050 ERROR EC copy has already started in another mode.

STXC1100 ERROR Session does not exist.

STXC1102 ERROR Invalid Snap Data Volume.

STXC1104 ERROR Operation sequence error.

STXC1106 ERROR Insufficient memory.

STXC1107 ERROR Alias is not defined.

STXC1108 ERROR The specification of physical information is incorrect.

STXC1109 ERROR ETERNUS cannot be recognized.

STXC1110 ERROR Alias specified for the copy source is not defined.

STXC1111 ERROR Logical volume state is not able to be set to the copy protection.

STXC1200 ERROR Unexpected error.

STXC1201 ERROR Internal inconsistency.

STXC1202 ERROR Unsupported function.

STXC1203 ERROR The operation is not permitted.

STXC1204 ERROR SCSI error detected. Error=(ERROR).

STXC1208 ERROR Specified logical volume is not ETERNUS.

STXC1209 ERROR Insufficient resource in ETERNUS.

STXC1212 ERROR Disk drive off by the ECO mode.

STXC1213 ERROR Invalid file system.

STXC1214 ERROR Preconditions for copy operation are not satisfied.

STXC1220 ERROR Change mode operation failed because of communication error. Cause=(DETAIL).

STXC1222 ERROR ETERNUS unit inconsistency.

STXC1223 ERROR The copy operation with ETERNUS is incorrect.

STXC1224 ERROR Communication error occurred.

STXC1225 ERROR MPHD environment is incorrect.

STXC1226 ERROR GDS environment is incorrect.

STXC1250 ERROR Specified LUN_V Number is invalid.

STXC1252 ERROR Operation is not supported.

STXC1300 ERROR Time out detected.

STXC1301 WARNING The operation was accepted.

STXC1400 ERROR File open error. File name=(FILE). Cause=(CAUSE).

STXC1401 ERROR The file name of ACCC can not be acquired. Cause=(CAUSE).

STXC1402 ERROR ACCC parameter name is not defined. Parameter=(PARAM).

STXC1403 ERROR ACCC parameter value is not allowed. Parameter=(PARAM).

STXC1404 ERROR ACCC parameter value is out of range. Parameter=(PARAM).

STXC1405 ERROR The combination of ACCC parameters is incorrect.

STXC1406 ERROR Waiting time cannot be set.

STXC1407 ERROR ACCC parameter is not defined. Parameter=(PARAM).

STXC1409 ERROR ACCC (PARAM) parameter is already defined.

STXC1410 ERROR Alias number reached the maximum.

STXC1411 ERROR Alias is already defined.

STXC1412 ERROR Alias identifier does not exist.

STXC1500 ERROR Error occurred recognition of ETERNUS management file. Cause=(CAUSE).

STXC1600 ERROR ETERNUS is not registered on ETERNUS management file.

STXC1700 ERROR Alias management file access error. Cause=(CAUSE).

STXC1801 ERROR Group_file does not exist.

STXC1802 ERROR Syntax error was detected in Group File.line=(LINE).

STXC1803 ERROR There is no volume name in Copy Group File.

STXC1804 ERROR Error occurred with copy operation described in group file. VOLINFO. Error message=(MSG).

STXC1805 ERROR The number of the copy pairs or logical volumes described in the group file exceeds the maximum number.

STXC1901 INFO The LAN interface management service is already running.

STXC1902 ERROR Failed to start the LAN interface management service.

STXC1903 ERROR The LAN interface management service is not running.

STXC1904 ERROR Failed to log in to the ETERNUS Disk storage system.

STXC1905 ERROR Unable to connect to the ETERNUS Disk storage system.

STXC2000 ERROR The parameter value is not correct.

STXC2001 ERROR The values of the parameter exceed the range allowed.

STXC2002 ERROR The parameter specifications exceed the number of specifications allowed.

STXC2003 ERROR The parameter specifications are insufficient.

STXC2004 ERROR The combination of parameters is not correct.

STXC2005 ERROR The specified status for the parameter is invalid.

STXC2006 ERROR The specified parameter is invalid.

STXC2007 ERROR The specified size is invalid.

STXC2008 ERROR The specified parameter does not match the model type of the ETERNUS Disk storage system.

STXC2009 ERROR An internal error occurred.

STXC2010 ERROR Another session has exclusive rights.

STXC2011 ERROR The specified capacity or number has reached the limit.

STXC2012 ERROR The specified parameter cannot be used for the encryption mode.

STXC2013 ERROR Cannot be used because of the Slave CM.

STXC2014 ERROR Insufficient memory.

STXC2015 ERROR The specified target does not exist.

STXC2016 ERROR Unsupported model is selected as the REC target.

STXC2017 ERROR The specified value has already been registered.

STXC2018 ERROR Encrypted volumes exist.

STXC2019 ERROR Shutdown or startup is currently being performed.

STXC2020 ERROR A Quick Format is currently being performed.

STXC2021 ERROR Encryption or decryption is currently being performed.

STXC2022 ERROR An Advanced Copy is currently being performed.

STXC2023 ERROR RAID Migration is currently being performed.

STXC2024 ERROR LDE is currently being performed.

STXC2025 ERROR A REC session exists.

STXC2026 ERROR Controller firmware is currently being registered.

STXC2027 ERROR Remote maintenance is currently being performed.

STXC2028 ERROR The Thin Provisioning License is not registered.

STXC2029 ERROR There is no copy license.

STXC2030 ERROR The current copy phase is not correct.

STXC2031 ERROR A copy path error occurred.

STXC2032 ERROR The command is invalid.

STXC2033 ERROR The number of logical volumes exceeds the maximum.

STXC2034 ERROR The logical volume type is invalid.

STXC2035 ERROR The copy session cannot be set for the logical volume.

STXC2036 ERROR The copy source logical volume contains invalid data.

STXC2037 ERROR A copy encryption error occurred.

STXC2038 ERROR The resource domain numbers are invalid.

STXC2039 ERROR The specified logical volume cannot be used.

STXC2040 ERROR The copy session is in error status.

STXC2041 ERROR Parameter error.

STXC2042 ERROR The destination logical volume of the Totally copy is invalid.

STXC2043 ERROR Failed to reverse the session.

STXC2044 ERROR The copy session conflicts with an existing RAID migration session.

STXC2045 ERROR The copy source logical volume is being duplicated.

STXC2046 ERROR The copy destination logical volume is being duplicated.

STXC2047 ERROR The range of the cascade copy is invalid.

STXC2048 ERROR Unable to restore the copy session.

STXC2049 ERROR The number of linkages in the cascade copy exceeds the maximum.

STXC2050 ERROR The copy session is in ErrorSuspend status.

STXC2051 ERROR Multiple copy sessions in REC Consistency mode are operated in a single cabinet.

STXC2052 ERROR Unable to process the specified operation.

STXC2053 ERROR The RAID group is blocked.

STXC2054 ERROR The copy destination logical volume is protected.

STXC2055 ERROR The status of the REC Buffer is incorrect.

STXC2056 ERROR The untransferred REC Buffer stops the copy session reversing.

STXC2058 ERROR The copy session has already been reversed.

STXC2059 ERROR The number of copy sessions exceeds the maximum.

STXC2060 ERROR The copy sessions for a single copy source logical volume exceed the maximum.

STXC2061 ERROR The copy sessions for a single copy destination logical volume exceed the maximum.

STXC2062 ERROR The number of SnapOPC+ generations exceeds the maximum.

STXC2063 ERROR The copy source logical volumes for multiple monitor sessions are duplicated.

STXC2064 ERROR The new session and an existing session are not specified correctly.

STXC2065 ERROR The copy destination and cascade copy destination are duplicated.

STXC2066 ERROR An incorrect setting is specified to reverse the copy direction.

STXC2067 ERROR The SDV is currently being formatted.

STXC2068 ERROR A session with an SDV as the copy destination already exists.

STXC2069 ERROR A copy table is not set.

STXC2070 ERROR The copy table size is insufficient.

STXC2071 ERROR REC Buffer error.

STXC2072 ERROR REC Buffer is invalid after the copy resumes.

STXC2073 ERROR The REC Buffer is currently being used.

STXC2074 ERROR REC Buffer is invalid after the copy session is reversed.

STXC2075 ERROR Unable to copy the specified logical volume.

STXC2076 ERROR Unable to find the specified BoxID information.

STXC2077 ERROR Unable to delete the session in the remote ETERNUS Disk storage system.

STXC2078 ERROR A CFL is currently being performed.

STXC2079 ERROR The resolution of the copy table is invalid.

STXC2080 ERROR The specified SDV is invalid.

STXC2081 ERROR An SDV is specified for the copy source of the SnapOPC+.

STXC2082 ERROR A logical volume is specified for the copy destination of the SnapOPC+.

STXC2083 ERROR Retry required

STXC2084 ERROR The status is invalid or an abnormal firmware event occurred.

STXC2085 ERROR Unable to perform RAID migration.

STXC2086 ERROR Unable to start the Concurrent OPC function because the phase of the latest SnapOPC+ session is readying.

STXC2087 ERROR Unable to restore the copy session because the Concurrent OPC function is being used.

STXC2088 ERROR Failed to restore the copy session because the phase of the target session is readying.

STXC2089 ERROR The specified volume is being used by Extended Copy.

STXC2090 ERROR Failed to start the copy session because another copy session has already started.

STXC2091 ERROR Unable to start the Concurrent OPC function because a restoration copy session exists.

STXC2092 ERROR The storage system does not support the REC function with a LAN interface.

STXC2093 ERROR Insufficient resource in ETERNUS.

STXC2094 ERROR The copy source storage is not support this copy function.

STXC2095 ERROR An error is detected for the operation that was performed via the LAN. Error=(DETAIL)

STXC3000 ERROR The status of the cascade copy session is incorrect.

STXC3001 ERROR The copy logical source volumes are made by multiple ETERNUS Disk storage systems.

STXC3002 ERROR The source volumes of cascade copy sessions are made by multiple ETERNUS Disk storage systems.

STXC3003 ERROR The transfer mode of the cascade copy session is incorrect.

STXC3004 ERROR The logical volume is already defined in an Offloaded Data Transfer session.

STXS1027 ERROR The specified parameter is invalid. [parameter name=[NAME], parameter value=[VALUE]]

STXS2001 ERROR The specified user name and password have not been registered in the device. [user=[USER]]

STXS2002 ERROR The specified user does not have privileges greater than that of an administrator. [user=[USER]]

STXS2008 ERROR The registered user and password are not registered in the current device. [IP address=[IPADDR], user=[USER]]

STXS2009 ERROR The operation cannot be performed with the user privileges when registering the device. [IP address=[IPADDR], user=[USER]]

STXS2012 ERROR Failed to authenticate the user. [IP address=[IPADDR], user=[USER]]

STXS2013 ERROR The specified user does not have the "Software" role. [user=[USER]]

STXS3006 ERROR Failed to write file. [file name=[FILE]]

STXS4002 ERROR The device is not supported. [IP address=[IPADDR], model=[MODEL], type=[TYPE]]

STXS4046 ERROR The specified affinity group has not been registered. [affinity group number=[GROUP]]

STXS4047 ERROR The specified affinity group has been concatenated. [affinity group number=[GROUP]]

STXS5002 ERROR Failed to access the device. [code=[CODE], result=[RESULT]]

STXS7004 ERROR Failed to communicate with the device. [IP address=[IPADDR]]

STXS8003 ERROR The parameter specifications exceed the number of specifications allowed. [parameter name=[PARAM], parameter value=[VALUE]]

STXS8020 ERROR An internal error occurred. [parameter name=[PARAM], parameter value=[VALUE]]

STXS8070 ERROR The resource is being used. [parameter name=[PARAM], parameter value=[VALUE]]

STXS8098 ERROR Cannot be used because of the Slave CM. [parameter name=[PARAM], parameter value=[VALUE]]

STXS8101 ERROR Insufficient memory. [parameter name=[PARAM], parameter value=[VALUE]]

STXS8151 ERROR Shutdown or startup is currently being performed. [parameter name=[PARAM], parameter value=[VALUE]]

no such session.

invalid logical volume name.

メッセージ集の先頭へ