This chapter explains the outline, details, and the part changed with PRIMECLUSTER 4.3.
No | Version / Level | Change Location | Details |
|---|---|---|---|
1 | 4.3 | 3.1.6 Setting Up the Cluster High-Speed Failover Function 5.1.2 Setting Up the Shutdown Facility A.5 Cluster Installation Environment Worksheet A.11 System Design Examples (for the Virtual Machine Function not used) | The supported hard device was changed as follows. |
2 | 4.3 | 3.1.6 Setting Up the Cluster High-Speed Failover Function A.5 Cluster Installation Environment Worksheet A.11 System Design Examples (for the Virtual Machine Function not used) | Supported OS was changed to RHEL4.6 and RHEL5.1. |
3 | 4.3 | The exit code of Check script was added. | |
4 | 4.3 | The setup value of RMS automatic startup (HV_RCSTART) was changed from "Does not start up automatically" to "Start up automatically." | |
5 | 4.3 | The procedure which nullified the setting of the Hot Plug in the RHEL5.1 environment was added to the operational procedure. | |
6 | 4.3 | Attention by the configuration setting of GDS was added. | |
7 | 4.3 Second edition | RX600 S4 was added for the supported hardware device. | |
8 | 4.3 Second edition | RHEL5.2 has been added for the supported OS. | |
9 | 4.3 Third edition | Throughout document | Changed company name to "Fujitsu Technology Solutions." |
10 | 4.3 Fourth edition | 3.1.6 Setting Up the Cluster High-Speed Failover Function | RHEL AS 4.7 and RHEL5.3 have been added for the supported OS. |
11 | 4.3 Fourth edition | The supported hardware device was added as follows. | |
12 | 4.3 Fifth edition | Descriptions of "7.2.2.6 Entering maintenance mode for Cluster Application" were added. | |
13 | 4.3 Fifth edition | 3.1.6 Setting Up the Cluster High-Speed Failover Function | The supported OS was added as follows. |
14 | 4.3 Fifth edition | RX300 S5 was added. | |
15 | 4.3 Fifth edition | 2.2.1 Virtual Machine Function 3.2 When Using the Virtual Machine Function 5.1.2 Setting Up the Shutdown Facility 5.1.2.1 Checking the Shutdown Agent Information VMGuest (virtual machine) 9.4 Changing Virtual Machine Settings A.7 Cluster Configuration Worksheet System Design Examples (Virtual Machine function used) D.1 Searching for a Message | The function to operate guest operating systems in the virtual machine function as a cluster system was added. |
16 | 4.3 Sixth edition | BX960 was added for the supported hardware device. | |
17 | 4.3 Sixth edition | Supported OS was changed to RHEL5.3 or later, and RHEL6.X. | |
18 | 4.3 Sixth edition | 5.2 Setting Up Fault Resource Identification and Operator Intervention Request | Descriptions about RHEL6 were added for the supported OS. |
19 | 4.3 Sixth edition | 2.2.1 Virtual Machine Function 5.1.2 Setting Up the Shutdown Facility vmSP (Virtual Machine Service Provider) 7.2 Operating the PRIMECLUSTER System Changing Settings of the host OS (Xen Environment) System Design Examples (for the Virtual Machine Function used) | Descriptions when the cluster is operated between guest OSes on multiple host OSes with the virtual machine function were added and changed. |
20 | 4.3 Sixth edition | The file name of the GFS shared file system was changed. | |
21 | 4.3 Sixth edition | The explanation of "physical machine" was added. | |
22 | 4.3 Sixth edition | Descriptions of Configuration Update Service for SA were added. | |
23 | 4.3 Sixth edition | 2.2.1 Virtual Machine Function 3.2 When Using the Virtual Machine Function System Design Examples (for the Virtual Machine Function used in Xen Environment) | Descriptions for using the VMware environment with the virtual machine function were added. |
24 | 4.3 Sixth edition | Settings for the CF node name were changed. | |
25 | 4.3 Sixth edition | 5.1.2.3.1 Setting up the shutdown daemon 6.6 Setting Up Online/Offline Scripts 6.7.3.2 Setting Up Fsystem Resources 7.2.2.1 Starting a Cluster Application 7.2.2.6 Entering maintenance mode for Cluster Application 7.4.1.1 Failure Detection and Cause Identification if a Failure Occurs | Notes were added. |
26 | 4.3 Sixth edition | Procedures to change the MMB IP address were added. | |
27 | 4.3 Sixth edition | Procedures to change IPMI settings were added. | |
28 | 4.3 Sixth edition | Procedures to change Blade settings were added. | |
29 | 4.3 Sixth edition | Procedures to add, delete, and change hardware were added. | |
30 | 4.3 Sixth edition | Procedures to change the startup priority of a state transition procedure were added. | |
31 | 4.3 Sixth edition | The test for forced shutdown of cluster nodes was added. | |
32 | 4.3 Sixth edition | A.7 Cluster Configuration Worksheet | Descriptions of Diskdump were deleted. |
33 | 4.3 Sixth edition | Descriptions of check for the cluster environment were added. | |
34 | 4.3 Sixth edition | 3.2.1.1 Host OS setup (before installing the operating system on guest OS) 3.2.2.1 Host OS setup (before installing the operating system on guest OS) | The name of Installation Guide was changed to Software Release Guide. |
35 | 4.3 Sixth edition | Procedures to register a state transition procedure were added. | |
36 | 4.3 Sixth edition | 2.2.1 Virtual Machine Function 5.1.2 Setting Up the Shutdown Facility 5.1.2.1 Checking the Shutdown Agent Information VMGuest (virtual machine) PRIMEQUEST 500/400 series | Descriptions about PRIMEQUEST 500/400 series were deleted. |
37 | 4.3 Sixth edition | 4.4 Starting the Web-Based Admin View Screen 4.6 Exiting the Web-Based Admin View Screen When building a cluster system between guest OSes on one host OS | Descriptions about NetScape were deleted. |
38 | 4.3 Sixth edition | Incompatibilities for the client environment for Web-Based Admin View were added. | |
39 | 4.3 Sixth edition | Changed the number of supported nodes. | |
40 | 4.3 Sixth edition | 2.2.1 Virtual Machine Function 3.2 When Using the Virtual Machine Function 5.1.2 Setting Up the Shutdown Facility 6.3.1 Setting Up System Disk Mirroring 9.4 Changing Virtual Machine Settings A.7 Cluster Configuration Worksheet A.12 System Design Examples (for the Virtual Machine Function used in KVM Environment) | Descriptions for using a KVM environment with the virtual machine function were added and chanted. |
41 | 4.3 Sixth edition | Changed PSA to PSA/SVmco. | |
42 | 4.3 Sixth edition | Added the description to recover the cluster interconnect when an error occurs. | |
43 | 4.3 Sixth edition | Added the supported server models. | |
44 | 4.3 Sixth edition | Added the description on how to collect the SVmco information. | |
45 | 4.3 Sixth edition | Added incompatible messages. | |
46 | 4.3 Sixth edition | Added incompatible functions for the Changes of the Behavior of CF Startup. | |
47 | 4.3 Seventh edition | Added notes to the explanation of the test for forced shutdown of cluster nodes. | |
48 | 4.3 Seventh edition | Changed the use when building a cluster system between guest OSes on one host OS. | |
49 | 4.3 Seventh edition | Added "Single-Node Cluster Operation." | |
50 | 4.3 Seventh edition | Changed titles and procedures in Chapter 3. | |
51 | 4.3 Seventh edition | Added notes on umask. | |
52 | 4.3 Seventh edition | 3.2.1.1 Host OS setup (before installing the operating system on guest OS) 3.2.2.1 Host OS setup (before installing the operating system on guest OS) 3.2.3.1.3 Host OS setup (before installing the operating system on guest OS) | Added notes on immediate cluster failover when an I/O device where the system volume is placed fails. |
53 | 4.3 Seventh edition | Deleted descriptions for "Behavior setup of recovery function." | |
54 | 4.3 Seventh edition | Changed "Attached Driver Guide" to "PRIMEQUEST 1000 SERIES HBA blockage function USER'S GUIDE." | |
55 | 4.3 Seventh edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.2.2 Host OS setup (after installing the operating system on guest OS) | Changed the setting procedure of virtual SCSI devices in a KVM environment. |
56 | 4.3 Seventh edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.2.2 Host OS setup (after installing the operating system on guest OS) | Changed the setting procedure of virtual bridges in a Xen environment. |
57 | 4.3 Seventh edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.2.2 Host OS setup (after installing the operating system on guest OS) 3.2.3.1.4 Host OS setup (after installing the operating system on guest OS) | Added the setting procedure for the guest OS in the host OS. |
58 | 4.3 Seventh edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.2.2 Host OS setup (after installing the operating system on guest OS) 3.2.3.1.4 Host OS setup (after installing the operating system on guest OS) | Added the reference when changing the settings in /etc/sysconfig/libvirt-guests. |
59 | 4.3 Seventh edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.2.2 Host OS setup (after installing the operating system on guest OS) 3.2.3.1.4 Host OS setup (after installing the operating system on guest OS) | Added notes on setting up the virtual bridge for the administrative LAN in a KVM environment. |
60 | 4.3 Seventh edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.2.2 Host OS setup (after installing the operating system on guest OS) 3.2.3.1.4 Host OS setup (after installing the operating system on guest OS) | Added notes when setting /etc/sysconfig/libvirt-guests. |
61 | 4.3 Seventh edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.2.2 Host OS setup (after installing the operating system on guest OS) 3.2.3.1.4 Host OS setup (after installing the operating system on guest OS) 4.4 Starting the Web-Based Admin View Screen 5.1.2.3.1 Setting up the shutdown daemon vmSP (Virtual Machine Service Provider) 6.7.3.6 Setting Up Takeover Network Resources | Added explanation of IPv6. |
62 | 4.3 Seventh edition | Changed the procedure of Host OS failover function. | |
63 | 4.3 Seventh edition | Added "Installation and Setup of Related Software." | |
64 | 4.3 Seventh edition | Added notes on Firewall. | |
65 | 4.3 Seventh edition | Added notes when sharing the administrative LAN and the cluster interconnect on the same NIC. | |
66 | 4.3 Seventh edition | Changed the explanation about the user name and password for logging in to the host OS or hypervisor. | |
67 | 4.3 Seventh edition | 5.1.2.3 Setting up the shutdown agent in PRIMERGY 5.1.2.4 Setting up the shutdown agent in PRIMEQUEST 5.1.2.5 Setting up the shutdown agent in virtual machine environment | Added notes on the operation check after setting up the shutdown agent. |
68 | 4.3 Seventh edition | vmSP (Virtual Machine Service Provider) | Added explanations of examples and notes on setting the configuration file for the shutdown agent. |
69 | 4.3 Seventh edition | Added information to be checked when "TestFailed" or "InitFailed" is displayed in Information "About the displayed results." | |
70 | 4.3 Seventh edition | Changed descriptions when "TestFailed" or "InitFailed" is displayed in Information. | |
71 | 4.3 Seventh edition | 5.2 Setting Up Fault Resource Identification and Operator Intervention Request | Changed descriptions for "Preparation prior to displaying fault resource identification and operator intervention request messages." |
72 | 4.3 Seventh edition | Changed notes on setting up the host OS in Note. | |
73 | 4.3 Seventh edition | Changed the explanation of the environment variable HV_AUTORECOVER. | |
74 | 4.3 Seventh edition | Added "PartialCluster" to the attribute of userApplication. | |
75 | 4.3 Seventh edition | 6.7.5 Registering the Cluster Service of a PRIMECLUSTER-compatible product 10.3 Changing a Cluster Application 11.1.1 Changing the Operation Attributes (CUI) 10.2.1 Deleting the Hardware Resource 10.2.2 Deleting a userApplication Appendix F Registering PRIMECLUSTER-compatible Resources | Delete the explanation for associating resources to a cluster service instance for PRIMECLUSTER-compatible products. |
76 | 4.3 Seventh edition | Added "Setting Up the RMS Environment." | |
77 | Seventh edition | 7.2.2.4 Bringing Faulted Cluster Application to available state | Deleted the explanation if faults are cleared while the cluster application is Online. |
78 | 4.3 Seventh edition | Added notes on use of maintenance mode. | |
79 | 4.3 Seventh edition | 9.4.1.3 Changing the Settings in /etc/sysconfig/libvirt-guests | Added "Changing the Settings in /etc/sysconfig/libvirt-guests." |
80 | 4.3 Seventh edition | Changed the structure of this section to add explanations to change the user name and password for iRMC. | |
81 | 4.3 Seventh edition | Changed the structure of this section to add explanations to change the slot number of server blades. | |
82 | 4.3 Seventh edition | Added conditions where stopping RMS is not necessary to Information. | |
83 | 4.3 Seventh edition | Added explanations of when setting Gds resources is not necessary. | |
84 | 4.3 Seventh edition | Described the procedure required after execution of the cldelrsc command. | |
85 | 4.3 Seventh edition | Added notes on the GDS configuration file. | |
86 | 4.3 Seventh edition | Added the procedure "5. Change the device name of the resource of the shared disk device." | |
87 | 4.3 Seventh edition | 12.3.2.2 Procedure for Applying Correction by Rolling Update | Changed the explanation for executing failover of the cluster application. |
88 | 4.3 Seventh edition | Added notes when using message queues on applications. | |
89 | 4.3 Seventh edition | Added the item of RMS shutdown wait time. | |
90 | 4.3 Seventh edition | Added notes for the maximum numbers of resources and detectors. | |
91 | 4.3 Seventh edition | Changed the contents in "Setting value" of "Use" in "Item." | |
92 | 4.3 Seventh edition | Changed the Gds Resource. | |
93 | 4.3 Seventh edition | Delete the following commands from the list of the online manual page for RMS: - hvdist - hvgdmake - hvrclev - hvreset - hvthrottle | |
94 | 4.3 Seventh edition | Changed the description in Note. | |
95 | 4.3 Seventh edition | Added notes on environments and functions which PRIMECLUSTER supports. | |
96 | 4.3 Seventh edition | Added notes when using a switchover file system on the shared disk. | |
97 | 4.3 Seventh edition | Added functions which are not available on the virtual machine where PRIMECLUSTER is to be installed. | |
98 | 4.3 Seventh edition | Changed notes on the Native Multipathing (NMP). | |
99 | 4.3 Seventh edition | Changed points when installing VMware vSphere. | |
100 | 4.3 Seventh edition | Changed descriptions of the setting for SCSI controllers. | |
101 | 4.3 Seventh edition | Added the step to set up the /etc/hostid file. | |
102 | 4.3 Seventh edition | Changed step 1. | |
103 | 4.3 Seventh edition | Appendix I Startup Scripts and Startup Daemons, and Port Numbers in PRIMECLUSTER | Added the appendix. |
104 | 4.3 Seventh edition | Added the appendix. | |
105 | 4.3 Seventh edition | Added "HV_CONNECT_TIMEOUT" in all versions as an incompatible function. | |
106 | 4.3 Seventh edition | Added "Changes in PRIMECLUSTER 4.3A20 from 4.2A30." | |
107 | 4.3 Eighth edition | Changed the number of supported nodes. | |
108 | 4.3 Eighth edition | 1.7 Notes When Building a System 6.10 Setting Contents and Notes on Cluster Application 6.11 Notes When Setting Cmdline Resources 6.12 Notes When Setting Fsystem Resource 9.2.4 Changing the Subnet Mask of CIP 11.3.1 Changing Time to Detect CF Heartbeat Timeout 11.3.2 Changing Time to Detect RMS Heartbeat Timeout | Added descriptions. |
109 | 4.3 Eighth edition | Added notes. | |
110 | 4.3 Eighth edition | Changed notes of Host OS failover function. | |
111 | 4.3 Eighth edition | Described notes on the single-node cluster operation. | |
112 | 4.3 Eighth edition | 2.3.3 Single-Node Cluster Operation 4.3.3.1 Initial setup of the operation management server | Added notes on the single-node cluster operation. |
113 | 4.3 Eighth edition | 3.2.1.1 Host OS setup (before installing the operating system on guest OS) 3.2.2.1 Host OS setup (before installing the operating system on guest OS) 3.2.3.1.3 Host OS setup (before installing the operating system on guest OS) | Added descriptions in the case of taking time for an I/O error to reach the ext3 file system. |
114 | 4.3 Eighth edition | Described the reference manual for the case of the PRIMEQUEST 2000 series. | |
115 | 4.3 Eighth edition | 3.2.1.1 Host OS setup (before installing the operating system on guest OS) 3.2.3.1.3 Host OS setup (before installing the operating system on guest OS) | Described notes on adding virtual disks. |
116 | 4.3 Eighth edition | 3.2.1.1 Host OS setup (before installing the operating system on guest OS) 3.2.3.1.3 Host OS setup (before installing the operating system on guest OS) | Added descriptions that setting mirrored volume of the shared class disk, which is created on the host OS, is required for the guest OS when the system disk of the guest OS is mirrored. |
117 | 4.3 Eighth edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.3.1.4 Host OS setup (after installing the operating system on guest OS) | Added the setting procedure of virtio-SCSI devices. |
118 | 4.3 Eighth edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.3.1.4 Host OS setup (after installing the operating system on guest OS) | Deleted notes on adding virtual disks. |
119 | 4.3 Eighth edition | Added notes. | |
120 | 4.3 Eighth edition | Added notes on changing the cluster name and CF node names. | |
121 | 4.3 Eighth edition | Added a note in the case of creating a redundant administrative LAN used in the shutdown facility by using GLS. | |
122 | 4.3 Eighth edition | Added the PRIMEQUEST 2000 series to the supported hardware devices. | |
123 | 4.3 Eighth edition | Added the RX500/BX620 series to the supported hardware devices. | |
124 | 4.3 Eighth edition | Added the procedure to the startup configuration for the IPMI service. | |
125 | 4.3 Eighth edition | Described the procedure to encrypt the password. | |
126 | 4.3 Eighth edition | Added notes on using the kdump shutdown agent on PRIMERGY. | |
127 | 4.3 Eighth edition | Added notes on characters allowed in passwords. | |
128 | 4.3 Eighth edition | vmSP (Virtual Machine Service Provider) | Changed the procedure to start the shutdown facility. |
129 | 4.3 Eighth edition | Added notes when nodes were forcibly stopped by the SA_mmbr shutdown agent. | |
130 | 4.3 Eighth edition | 5.1.2.5 Setting up the shutdown agent in virtual machine environment | Added "5.1.2.5.4 Setting up the Host OS failover function when using it in the PRIMEQUEST KVM environment." |
131 | 4.3 Eighth edition | vmSP (Virtual Machine Service Provider) | Described the information about the maximum concurrent connections for SSH. |
132 | 4.3 Eighth edition | Added the note when the device name of the shared disk device varies depending on a node. | |
133 | 4.3 Eighth edition | Added notes on using EC or REC function of ETERNUS disk array. | |
134 | 4.3 Eighth edition | Added descriptions that setting mirrored volume of the shared class disk, which is created on the host OS, is required for the guest OS when the system disk of the guest OS is mirrored. | |
135 | 4.3 Eighth edition | Changed descriptions of "File system setup." | |
136 | 4.3 Eighth edition | When building a cluster system between guest OSes on one host OS When building a cluster system between guest OSes on multiple host OSes A.12.1 When building a cluster system between guest OSes on one host OS | Changed notes on configuration on the virtual machine function. |
137 | 4.3 Eighth edition | Changed the outline of the environment valuable "HV_OFFLINE_REASON." | |
138 | 4.3 Eighth edition | 6.6 Setting Up Online/Offline Scripts 6.11.2.1.2 Environment Variables can be referred to within the Start and Stop Scripts | Changed the description for the case of referencing or changing of the RMS environment variables. |
139 | 4.3 Eighth edition | Added the note on the hvw command. | |
140 | 4.3 Eighth edition | Changed the default value of the environment valuable "RELIANT_SHUT_MIN_WAIT." | |
141 | 4.3 Eighth edition | Added "7.5 Notes on Operation." | |
142 | 4.3 Eighth edition | Added notes on forcibly activating cluster applications. | |
143 | 4.3 Eighth edition | Added the procedure for the case that IP address used by Web-Based Admin View needs to be changed. | |
144 | 4.3 Eighth edition | Described the procedure to encrypt the password. | |
145 | 4.3 Eighth edition | Added "8.12.4 Adding Hardware by DR (Dynamic Reconfiguration)." | |
146 | 4.3 Eighth edition | Added the procedure to add a shared disk device. | |
147 | 4.3 Eighth edition | Added the procedure to change a shared disk device. | |
148 | 4.3 Eighth edition | 8.1.3.2 Changing a network interface card used for the public LAN and the administrative LAN | Changed the procedure to change the network interface cards. |
149 | 4.3 Eighth edition | When building a cluster system between guest OSes on one host OS When building a cluster system between guest OSes on multiple host OSes A.12.1 When building a cluster system between guest OSes on one host OS A.12.2 When building a cluster system between guest OSes on multiple host OSes H.7.1 Configuring a Cluster System Between Guest OSes on Two ESXi Hosts H.7.2 Configuring a Cluster System Between Guest OSes on One ESXi Host | Changed "Used software." |
150 | 4.3 Eighth edition | A.11.1.1 Cluster Configuration Worksheet A.11.2.1 Cluster Configuration Worksheet Cluster Configuration Worksheet Cluster Configuration Worksheet A.12.1.1 Cluster Configuration Worksheet A.12.2.1 Cluster Configuration Worksheet | Changed the setting of "weight" of "Node information" found on the Cluster Configuration Worksheet in System Design Examples. |
151 | 4.3 Eighth edition | Described messages that are output when fjsnap or pclsnap command is executed. | |
152 | 4.3 Eighth edition | Added the PRIMEQUEST 2000 series as a target server model. | |
153 | 4.3 Eighth edition | Added the core which is output to each directory. | |
154 | 4.3 Eighth edition | Appendix D Messages | Moved the descriptions to "PRIMECLUSTER Messages." |
155 | 4.3 Eighth edition | Added notes on using Configuration Update Service for SA. | |
156 | 4.3 Eighth edition | Added "Appendix F Using PRIMECLUSTER in a KVM environment." | |
157 | 4.3 Eighth edition | Changed notes to exclude a virtual machine from cluster functions of VMware if PRIMECLUSTER is to be installed in the virtual machine. | |
158 | 4.3 Eighth edition | Added notes on executing hvswitch -f command to start or switch cluster applications. | |
159 | 4.3 Eighth edition | Described the setting of LAN paths when you prioritize the automatic switchover. | |
160 | 4.3 Eighth edition | Changed descriptions of installing VMware vSphere. | |
161 | 4.3 Eighth edition | Changed utilized ports of a startup script "S13SMAWsf." | |
162 | 4.3 Eighth edition | Added the following as incompatible commands: - sdtool command - hvshut command - hvswitch command | |
163 | 4.3 Eighth edition | Added the following as incompatible functions: - Configuring the IPMI shutdown agent - Changing the port number used by the shutdown facility - Setting up the Host OS failover function when using it in the PRIMEQUEST KVM environment - Change of the target node to forcibly shut down when a heartbeat failure occurs - Operator Intervention Request | |
164 | 4.3 Eighth edition | Added the following as incompatible messages: - Changes of RMS console message - Changes of the response message for the operator intervention request | |
165 | 4.3 Eighth edition | Changed descriptions of an incompatible function "Node state of RMS when a node is shut down." | |
166 | 4.3 Eighth edition | Added "virtual disk (virtual disk)." | |
167 | 4.3 Ninth edition | 4.2 Activating the Cluster Interconnect 5.1.3.2 Registering Hardware Devices 5.2 Setting Up Fault Resource Identification and Operator Intervention Request 9.2.1 Changing the IP Address of the Public LAN 9.2.2 Changing the IP Address of the Administrative LAN | Added the descriptions for RHEL7. |
168 | 4.3 Ninth edition | 3.2 When Using the Virtual Machine Function 7.2.2.4 Bringing Faulted Cluster Application to available state Appendix A PRIMECLUSTER System Design Worksheets H.2.1.1 Installation and Configuration of Related Software | Deleted the descriptions about RHEL5. |
169 | 4.3 Ninth edition | Added the notes on the virtual machine function. | |
170 | 4.3 Ninth edition | 2.2.1 Virtual Machine Function 3.2 When Using the Virtual Machine Function 5.1.2 Setting Up the Shutdown Facility 9.4.1 Changing Host OS Settings (KVM environment) A.12 System Design Examples (for the Virtual Machine Function used in KVM Environment) | Changed the term "hypervisor" to "host OS." |
171 | 4.3 Ninth edition | Added the series name to the PRIMEQUEST entry. | |
172 | 4.3 Ninth edition | Modified the entries of the CF node name. | |
173 | 4.3 Ninth edition | Added the notes on the SF Wizard. | |
174 | 4.3 Ninth edition | Added RX2520 M1/RX4770 M1/TX2540 M1 as a server model. | |
175 | 4.3 Ninth edition | Changed the explanations on admIP in rcsd.cfg. | |
176 | 4.3 Ninth edition | Added the explanations of how to create a shared disk configuration file in "Registering a shared disk." | |
177 | 4.3 Ninth edition | Added the explanations for mirroring among servers. | |
178 | 4.3 Ninth edition | 5.2 Setting Up Fault Resource Identification and Operator Intervention Request | Modified the default setting of fault resource identification and operator intervention request. |
179 | 4.3 Ninth edition | 5.2 Setting Up Fault Resource Identification and Operator Intervention Request | Changed the message contents of 1421. |
180 | 4.3 Ninth edition | Changed the explanations of processing after setting up GLS. | |
181 | 4.3 Ninth edition | 6.3.1 Setting Up System Disk Mirroring 6.7.3.4 Setting Up Gds Resources | Changed the reference destination of "PRIMECLUSTER Global Disk Services Configuration and Administration Guide." |
182 | 4.3 Ninth edition | Added the reference targets for setting up Online/Offline scripts. | |
183 | 4.3 Ninth edition | 6.7.2.1 Creating Standby Cluster Applications 6.7.2.2 Creating Scalable Cluster Applications 6.10.1 Setting Contents of a Cluster Application 10.2.2 Deleting a userApplication | Modified the display example of the hvw command. |
184 | 4.3 Ninth edition | Added the notes on the procedure for creating Cmdline resources. | |
185 | 4.3 Ninth edition | Added the reference targets for notes when setting Fsystem resources. | |
186 | 4.3 Ninth edition | Changed the contents of definition for the cluster setting file. | |
187 | 4.3 Ninth edition | Changed contents of setting file definition for the cluster. | |
188 | 4.3 Ninth edition | Added the notes on Configuration-Activate. | |
189 | 4.3 Ninth edition | Added the notes on exclusive relationships between cluster applications. | |
190 | 4.3 Ninth edition | Added the configuration method for monitoring by SNMP manager. | |
191 | 4.3 Ninth edition | 6.11.2.2.2 Environment Variables that can be referred to within the Check Scripts | Added "Environment Variables that can be referred to within the Check Scripts". |
192 | 4.3 Ninth edition | Added the section on file system in shared disk devices. | |
193 | 4.3 Ninth edition | Added the notes on state display of other objects. | |
194 | 4.3 Ninth edition | Changed the descriptions of how to start RMS. | |
195 | 4.3 Ninth edition | Added the explanations for when the resource state changed during maintenance mode. | |
196 | 4.3 Ninth edition | Changed the operation procedure of resource and added reference. | |
197 | 4.3 Ninth edition | Added and changed the tables and notes of cron processing. | |
198 | 4.3 Ninth edition | Chapter 8 Changing the Cluster System Configuration Chapter 9 Changing the Cluster System Environment Chapter 10 Configuration change of Cluster Applications Chapter 11 Changing the Operation Attributes of a Cluster System | Changed the chapter organization. |
199 | 4.3 Ninth edition | Changed the procedure for adding shared disk devices. | |
200 | 4.3 Ninth edition | Changed the procedure for adding hardware by DR(Dynamic Reconfiguration). | |
201 | 4.3 Ninth edition | Added "Adding a Cluster Application." | |
202 | 4.3 Ninth edition | Added "Adding a Resource." | |
203 | 4.3 Ninth edition | Added "Changing a Resource." | |
204 | 4.3 Ninth edition | 10.7 Adding file system to the shared disk by Dynamic Changing Configuration | Added "Adding file system to the shared disk by Dynamic Changing Configuration." |
205 | 4.3 Ninth edition | Changed the explanation on kernel parameters. | |
206 | 4.3 Ninth edition | Added hvdispall. | |
207 | 4.3 Ninth edition | Changed the explanations of the hvswitch function. | |
208 | 4.3 Ninth edition | Added the descriptions of information collection with FJQSS. | |
209 | 4.3 Ninth edition | Changed the description of the operation environment for Configuration Update Service for SA. | |
210 | 4.3 Ninth edition | Added and changed the notes on the cluster system in a VMware environment. | |
211 | 4.3 Ninth edition | Changed the note when using the I/O fencing. | |
212 | 4.3 Ninth edition | Changed the descriptions of how to configure the /etc/hostid file for running I/O fencing properly. | |
213 | 4.3 Ninth edition | Changed the setting contents for installing VMware vSphere. | |
214 | 4.3 Ninth edition | Changed the descriptions for setting up shutdown facility. | |
215 | 4.3 Ninth edition | Changed the description of utilized ports for S13SMAWsf. | |
216 | 4.3 Ninth edition | Appendix G Using the Migration Function in a KVM Environment Appendix J Systemd Services and Startup Daemons, and Port Numbers in PRIMECLUSTER | Added appendix. |
217 | 4.3 Ninth edition | Changed the information on incompatibility. | |
218 | 4.3 Tenth edition | Changed the description of the PRIMECLUSTER system state. | |
219 | 4.3 Tenth edition | Changed the description of "Synchronize time on all the nodes to configure a cluster system." | |
220 | 4.3 Tenth edition | Added the description to "Ports of RMS, BMC, and iRMC are exclusive to LAN." | |
221 | 4.3 Tenth edition | Chapter 3 Software Installation and Setup | Change the note on the immediate cluster failover if an I/O device where the system volume is placed fails. |
222 | 4.3 Tenth edition | Changed the note when an operating node is disconnected due to a power failure or other power supply problem. | |
223 | 4.3 Tenth edition | 3.2.1.1 Host OS setup (before installing the operating system on guest OS) 3.2.2.1 Host OS setup (before installing the operating system on guest OS) 3.2.3.1.3 Host OS setup (before installing the operating system on guest OS) | Added the description about the settings when performing immediate cluster failover if an I/O device where the system volume is placed fails in the ext3 or the ext4 file system. |
224 | 4.3 Tenth edition | Added the remark to "Prerequisites for the IPMI shutdown agent settings." | |
225 | 4.3 Tenth edition | 3.2.1.2 Host OS setup (after installing the operating system on guest OS) 3.2.2.2 Host OS setup (after installing the operating system on guest OS) 3.2.3.1.4 Host OS setup (after installing the operating system on guest OS) | Added the description to permit the sudo execution without "tty" when creating a user ID. |
226 | 4.3 Tenth edition | Added the description to the kdump settings. | |
227 | 4.3 Tenth edition | Added the description about the user group of the user that manages a cluster. | |
228 | 4.3 Tenth edition | Added the notes for the CF settings. | |
229 | 4.3 Tenth edition | Added the note on creating a shared disk configuration file. | |
230 | 4.3 Tenth edition | 5.2 Setting Up Fault Resource Identification and Operator Intervention Request | Changed the description when displaying a message to a console and also how to start the console. |
231 | 4.3 Tenth edition | Changed the description of the cluster environment check. | |
232 | 4.3 Tenth edition | Added the notes when stopping RMS. | |
233 | 4.3 Tenth edition | Changed and added the descriptions of notes on operation. | |
234 | 4.3 Tenth edition | Changed the description of the contents of the hvlogcron processing. | |
235 | 4.3 Tenth edition | Added the description to check the PRIMECLUSTER environment. | |
236 | 4.3 Tenth edition | Added "Changing an SF Node Weight." | |
237 | 4.3 Tenth edition | Added "Changing the MTU Value of a Network Interface of Cluster Interconnects." | |
238 | 4.3 Tenth edition | Appendix A PRIMECLUSTER System Design Worksheets | Added the setting items. |
239 | 4.3 Tenth edition | Changed the description of the directory where a crash dump is stored. | |
240 | 4.3 Tenth edition | Changed the node on managing the file system on the LUN of the shared disk unit as the Fsystem resource. | |
241 | 4.3 Tenth edition | Added S06clonltrc to /etc/rc3.d. | |
242 | 4.3 Tenth edition | Changed the remarks of S13SMAWsf. | |
243 | 4.3 Tenth edition | Added the service names, to be supported to port numbers, to Remarks. | |
244 | 4.3 Tenth edition | Changed the Unit of After for fjsvwvbs.service. | |
245 | 4.3 Tenth edition | Changed the description when changing the iptables settings described in Notes. | |
246 | 4.3 Eleventh edition | Changed the supported hardware devices. | |
247 | 4.3 Eleventh edition | Added and changed the notes on a KVM environment and on a VMware environment. | |
248 | 4.3 Eleventh edition | Added the note on the calculation for the survival priority. | |
249 | 4.3 Eleventh edition | Deleted the note on using the mirroring among servers of GDS. | |
250 | 4.3 Eleventh edition | 8.1.1.1 Adding a shared disk device | Changed the operation procedure for adding the shared disk devices. |
251 | 4.3 Eleventh edition | Added and changed the node on the cluster system in a VMware environment. |
GDS: Global Disk Services
GFS: Global File Services
GLS: Global Link Services
