AHS: INFO: ahs00001: HTTP Server started. [%s1]
AHS: INFO: ahs00002: HTTP Server stopped. [%s1]
AHS: ERROR: ahs00004: Pre-configuration failed [%s1]
AHS: ERROR: ahs00005: Unable to open logs [%s1]
AHS: ERROR: ahs00006: Configuration Failed [%s1]
AHS: ERROR: ahs00008: %s1: Module "%s2" is not compatible with this version of Apache (found %s3, need %s4). Please contact the vendor for the correct version. [%s5]
AHS: ERROR: ahs00009: %s1: Module "%s2" could not be loaded, because the dynamic module limit was reached. Please increase DYNAMIC_MODULE_LIMIT and recompile. [%s3]
AHS: ERROR: ahs00010: Syntax error in -C/-c directive: %s1 [%s2]
AHS: ERROR: ahs00011: %s1: Could not open configuration file %s2: %s3 [%s2]
AHS: ERROR: ahs00012: %s1 Syntax error on line %s2 of %s3: %s4 [%s3]
AHS: ERROR: ahs00013: (%s1)%s2: Invalid config file path %s3 [%s3]
AHS: ERROR: ahs00014: (%s1)%s2: alloc_listener: failed to set up sockaddr for %s3 [%s4]
AHS: ERROR: ahs00015: (%s1)%s2: alloc_listener: failed to get a socket for %s3 [%s4]
AHS: ERROR: ahs00016: (%s1)%s2: make_sock: for address %s3, apr_socket_opt_set: (%s4) [%s5]
AHS: WARNING: ahs00017: (%s1)%s2: make_sock: failed to set %s3 for address %s4, using default [%s5]
AHS: ERROR: ahs00018: (%s1)%s2: make_sock: could not bind to address %s3 [%s4]
AHS: ERROR: ahs00019: (%s1)%s2: make_sock: unable to listen for connections on address %s3 [%s4]
AHS: ERROR: ahs00020: no listening sockets available, shutting down [%s1]
AHS: ERROR: ahs00021: (%s1)%s2: Couldn't start ErrorLog process [%s3]
AHS: ERROR: ahs00022: (%s1)%s2: %s3: Invalid error log path %s4. [%s5]
AHS: ERROR: ahs00023: (%s1)%s2: %s3: could not open error log file %s4. [%s5]
AHS: ERROR: ahs00024: piped_log_spawn: unable to setup child process '%s1': %s2 [%s3]
AHS: ERROR: ahs00025: unable to start piped log program '%s1': %s2 [%s3]
AHS: ERROR: ahs00026: (%s1)%s2: Invalid PID file path %s3, ignoring. [%s4]
AHS: ERROR: ahs00028: %s1: could not log pid to file %s2 [%s3]
AHS: ERROR: ahs00029: [%s1] file %s2, line %s3, assertion "%s4" failed [%s5]
AHS: ERROR: ahs00030: (%s1)%s2: Fatal error: unable to create global pool for use with by the scoreboard [%s3]
AHS: ERROR: ahs00031: (%s1)%s2: Fatal error: Invalid Scoreboard path %s3 [%s4]
AHS: ERROR: ahs00032: (%s1)%s2: Unable to create or access scoreboard (anonymous shared memory failure) [%s3]
AHS: ERROR: ahs00033: (%s1)%s2: cannot allocate scoreboard [%s3]
AHS: ERROR: ahs00034: (%s1)%s2: unable to create or access scoreboard "%s3" (name-based shared memory failure) [%s4]
AHS: ERROR: ahs00035: (%s1)%s2: invalid transfer log path %s3. [%s4]
AHS: ERROR: ahs00036: (%s1)%s2: could not open transfer log file %s3. [%s4]
AHS: ERROR: ahs00037: (%s1)%s2: Invalid mime types config path %s3 [%s4]
AHS: ERROR: ahs00038: (%s1)%s2: could not open mime types config file %s3. [%s4]
AHS: ERROR: ahs00040: (%s1)%s2: mod_rewrite: Parent could not create RewriteLock file %s3 [%s4]
AHS: ERROR: ahs00041: (%s1)%s2: mod_unique_id: unable to find hostname of the server [%s3]
AHS: ERROR: ahs00042: (%s1)%s2: mod_unique_id: unable to find IPv4 address of "%s3" [%s4]
AHS: WARNING: ahs00043: Require %s1 > 0, setting to 1 [%s2]
AHS: WARNING: ahs00044: ThreadLimit of %s1 exceeds compile time limit of %s2 threads, lowering ThreadLimit to %s2. [%s3] AHS: WARNING: ahs00044: ThreadLimit of %s1 exceeds compile time limit of %s2 servers, lowering ThreadLimit to %s2. [%s3]
AHS: WARNING: ahs00045: ThreadsPerChild of %s1 exceeds ThreadLimit value of %s2 threads, lowering ThreadsPerChild to %s2. To increase, please see the ThreadLimit directive. [%s3]
AHS: ERROR: ahs00100: (%s1)%s2: Failed to get the full path of %s3 [%s4]
AHS: ERROR: ahs00101: %s1: Service is already installed. [%s2]
AHS: ERROR: ahs00102: (%s1)%s2: No installed service named "%s3".
AHS: ERROR: ahs00103: (%s1)%s2: %s3: Unable to start the service manager. [%s4]
AHS: ERROR: ahs00104: (%s1)%s2: Parent: Cannot create shutdown event %s3 [%s4]
AHS: ERROR: ahs00105: (%s1)%s2: Parent: Cannot create restart event %s3 [%s4]
AHS: ERROR: ahs00106: (%s1)%s2: %s3: Unable to create the start_mutex. [%s4]
AHS: ERROR: ahs00107: (%s1)%s2: master_main: create child process failed. Exiting. [%s3]
AHS: ERROR: ahs00108: (%s1)%s2: master_main: WaitForMultipeObjects WAIT_FAILED -- doing server shutdown [%s3]
AHS: ERROR: ahs00109: (%s1)%s2: master_main: WaitForMultipeObjects with INFINITE wait exited with WAIT_TIMEOUT [%s3]
AHS: ERROR: ahs00111: Parent: child process exited with status %s1 -- Aborting. [%s2]
AHS: ERROR: ahs00112: (%s1)%s2: GetModuleFileName failed
AHS: ERROR: ahs00113: (%s1)%s2: Failed to open the WinNT service manager. [%s3]
AHS: ERROR: ahs00114: (%s1)%s2: OpenService failed [%s3]
AHS: ERROR: ahs00115: (%s1)%s2: ChangeServiceConfig failed
AHS: ERROR: ahs00116: (%s1)%s2: Failed to create WinNT Service Profile
AHS: ERROR: ahs00117: (%s1)%s2: %s3: Failed to store the ConfigArgs in the registry.
AHS: ERROR: ahs00118 (%s1)%s2: %s3: Failed to delete the service.
AHS: ERROR: ahs00119: (%s1)%s2: Query of Service %s3 failed
AHS: ERROR: ahs00120: (%s1)%s2: ISAPI: could not create the isapi cache pool [%s3]
AHS: ERROR: ahs00123: (%s1)%s2: Parent: Failed to get full path of %s3 [%s4]
AHS: ERROR: ahs00124: (%s1)%s2: Parent: Unable to %s3 [%s4]
AHS: ERROR: ahs00125: (%s1)%s2: Parent: Could not create %s3 event for child process [%s4]
AHS: ERROR: ahs00126: (%s1)%s2: Parent: Failed to create the child process. [%s3]
AHS: ERROR: ahs00127: (%s1)%s2: Parent: WSADuplicateSocket failed for socket %s3. Check the FAQ. [%s4]
AHS: ERROR: ahs00128: (%s1)%s2: %s3: Failed to start the service process. [%s4]
AHS: ERROR: ahs00129: (%s1)%s2: Child %s3: _beginthreadex failed. Unable to create all worker threads. Created %s4 of the %s5 threads requested with the ThreadsPerChild configuration directive. [%s6]
AHS: INFO: ahs00130: Parent: child process exited with status %s1 -- Restarting. [%s2]
AHS: WARNING: ahs00131: Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting [%s1]
AHS: ERROR: ahs00132: (%s1)%s2: OpenEvent on %s3 event [%s4]
AHS: ERROR: ahs00133: (%s1)%s2: SetEvent on %s3 event [%s4]
AHS: ERROR: ahs00134: (%s1)%s2: Parent: Failed to get the current path [%s3]
AHS: ERROR: ahs00135: (%s1)%s2: Parent: Could not set child process stdout [%s3]
AHS: ERROR: ahs00136: (%s1)%s2: Parent: Could not set child process stderr [%s3]
AHS: ERROR: ahs00137: (%s1)%s2: ResetEvent(shutdown_event) [%s3]
AHS: ERROR: ahs00138: (%s1)%s2: Parent: ResetEvent(restart_event) failed. [%s3]
AHS: ERROR: ahs00139: (%s1)%s2: Parent: SetEvent for child process %s3 failed [%s4]
AHS: WARNING: ahs00140: (%s1)%s2: No installed ConfigArgs for the service "%s3", using Apache defaults.
AHS: ERROR: ahs00141: (%s1)%s2: Failure registering service handler
AHS: ERROR: ahs00142: (%s1)%s2: Error starting service control dispatcher
AHS: ERROR: ahs00200: (%s1)%s2: Error retrieving pid file %s3 [%s4]
AHS: WARNING: ahs00201: httpd (pid %s1) already running [%s2]
AHS: WARNING: ahs00202: httpd (no pid file) not running [%s1]
AHS: WARNING: ahs00203: httpd (pid %s1?) not running [%s2]
AHS: WARNING: ahs00204: httpd not running, trying to start [%s1]
AHS: ERROR: ahs00205: (%s1)%s2: sending signal to server [%s3]
AHS: ERROR: ahs00206: Child %s1 returned a Fatal error... Apache is exiting! [%s2]
AHS: ERROR: ahs00207: (%s1)%s2: apr_proc_detach failed [%s3]
AHS: ERROR: ahs00208: (%s1)%s2: Could not open pipe-of-death. [%s3]
AHS: ERROR: ahs00209: (%s1)%s2: Couldn't create accept lock [%s3]
AHS: ERROR: ahs00210: (%s1)%s2: Couldn't set permissions on cross-process lock; check User and Group directives [%s3]
AHS: ERROR: ahs00213: (%s1)%s2: Couldn't initialize cross-process lock in child [%s3]
AHS: ERROR: ahs00214: (%s1)%s2: setuid: unable to change to uid: %s3 [%s4]
AHS: ERROR: ahs00215: (%s1)%s2: getpwuid: couldn't determine user name from uid %s3, you probably need to modify the User directive [%s4]
AHS: ERROR: ahs00216: (%s1)%s2: setgid: unable to set group id to Group %s3 [%s4]
AHS: ERROR: ahs00217: (%s1)%s2: initgroups: unable to set groups for User %s3 and Group %s4 [%s5]
AHS: ERROR: ahs00219: (%s1)%s2: mod_rewrite: Parent could not set permissions on RewriteLock; check User and Group directives [%s3]
AHS: WARNING: ahs00221: MaxClients of %s1 would require %s2 servers, and would exceed the ServerLimit value of %s3. Automatically lowering MaxClients to %s4. To increase, please see the ServerLimit directive. [%s5]
AHS: WARNING: ahs00222: ServerLimit of %s1 exceeds compile time limit of %s2 servers, lowering ServerLimit to %s2. [%s3]
AHS: ERROR: ahs00223: %s1: bad user name %s2 [%s3]
AHS: ERROR: ahs00224: %s1: bad group name %s2 [%s3]
AHS: ERROR: ahs00227: (%s1)%s2: unable to control socket non-blocking status [%s3]
AHS: WARNING: ahs00228: server reached MaxClients setting, consider raising the MaxClients setting [%s1]
AHS: ERROR: ahs00229: (%s1)%s2: apr_thread_create: unable to create listener thread [%s3]
AHS: ERROR: ahs00230: (%s1)%s2: Couldn't initialize signal thread [%s3]
AHS: ERROR: ahs00231: (%s1)%s2: fork: Unable to fork new process [%s3]
AHS: ERROR: ahs00232: (%s1)%s2: Cannot chroot when not started as root [%s3]
AHS: ERROR: ahs00233: (%s1)%s2: Can't chdir to %s3 [%s4]
AHS: ERROR: ahs00234: (%s1)%s2: Can't chroot to %s3 [%s4]
AHS: ERROR: ahs00235: (%s1)%s2: apr_socket_accept: giving up. [%s3]
AHS: ERROR: ahs00236: (%s1)%s2: apr_socket_accept: (client socket) [%s3]
AHS: ERROR: ahs00237: (%s1)%s2: ap_queue_init() failed [%s3]
AHS: ERROR: ahs00238: (%s1)%s2: ap_queue_info_create() failed [%s3]
AHS: ERROR: ahs00239: (%s1)%s2: malloc: out of memory [%s3]
AHS: ERROR: ahs00240: (%s1)%s2: apr_thread_create: unable to create worker thread [%s3]
AHS: WARNING: ahs00241: detected MinSpareThreads set to non-positive.Resetting to 1 to avoid almost certain Apache failure.Please read the documentation. [%s1]
AHS: WARNING: ahs00242: MaxClients (%s1) must be at least as large as ThreadsPerChild (%s2). Automatically increasing MaxClients to %s2. [%s3]
AHS: WARNING: ahs00243: MaxClients (%s1) is not an integer multiple of ThreadsPerChild (%s2), lowering MaxClients to %s3 for a maximum of %4 child processes, [%s5]
AHS: ERROR: ahs00244: No active workers found... Apache is exiting! [%s1]
AHS: INFO: ahs00245: seg fault or similar nasty error detected in the parent process [%s1]
AHS: ERROR: ahs00401: (%s1)%s2: Couldn't start TraceLog process. [%s3]
AHS: ERROR: ahs00402: (%s1)%s2: Invalid TraceLog file path %s3. [%s4]
AHS: ERROR: ahs00403: (%s1)%s2: Could not open TraceLog file %s3. [%s4]
AHS: ERROR: ahs00500: SSL: Library initialization failed.(%s1,%s2) [%s3]
AHS: ERROR: ahs00501: SSL: Insufficient memory.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00502: SSL: Slot information directory error.(%s1,%s2,%s3) [%s4]
AHS: ERROR: ahs00503: SSL: Invalid Token label.(%s1,%s2,%s3) [%s4]
AHS: ERROR: ahs00504: SSL: The site certificate has expired.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00505: SSL: The CA certificate has expired.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00506: SSL: Couldn't verify the site certificate.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00507: SSL: Couldn't verify the CA certificate.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00508: SSL: Couldn't analyze the site certificate.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00509: SSL: Couldn't analyze the CA certificate.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00510: SSL: The site certificate has been revoked.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00511: SSL: The CA certificate has been revoked.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00512: SSL: Invalid Site certificate nickname.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00513: SSL: Invalid Client CA certificate nickname.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00514: SSL: The site certificate has no path list.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00515: SSL: The CA certificate has no path list.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00516: SSL: The site certificate path is invalid.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00517: SSL: The CA certificate path is invalid.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00518: SSL: Private key does not exist.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00519: SSL: Invalid User pin.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00520: SSL: Certificate environment directory error.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs00521: SSL: Invalid cipher suite.(%s1,%s2,%s3,%s4) [%s5]
AHS22: ERROR: ahs00522: SSL: SSL definition name specification is invalid.(%s1) [%s2]
AHS22: ERROR: ahs00523: SSL: SSL definition acquisition failed.(%s1,%s2,%s3) [%s4]
AHS: ERROR: ahs00524: SSL: SSLSlotDir is not defined. [%s1]
AHS: ERROR: ahs00525: SSL: SSLTokenLabel is not defined. [%s1]
AHS: ERROR: ahs00526: SSL: SSLUserPINFile is not defined. [%s1]
AHS: ERROR: ahs00527: SSL: SSLVerifyClient is not defined. [%s1]
AHS: ERROR: ahs00528: SSL: SSLEnvDir is not defined. [%s1]
AHS: ERROR: ahs00529: SSL: SSLCertName is not defined. [%s1]
AHS: ERROR: ahs00530: SSL: User PIN decryption failed.(%s1,%s2) [%s3]
AHS: ERROR: ahs00531: SSL: Couldn't open user pin file.(%s1) [%s2]
AHS: ERROR: ahs00532: SSL: Couldn't read user pin file.(%s1) [%s2]
AHS: WARNING: ahs00534: SSL: The site certificate validity term has expired.(%s1,%s2) [%s3]
AHS: WARNING: ahs00535: SSL: The CA certificate validity term has expired.(%s1,%s2) [%s3]
AHS: WARNING: ahs00536: SSL: The site certificate will expire in %s1 days.(%s2,%s3) [%s4]
AHS: WARNING: ahs00537: SSL: The CA certificate will expire in %s1 days.(%s2,%s3) [%s4]
AHS: ERROR: ahs00538: (%s1)%s2: SSL: Failed to generate the certificate monitoring daemon. func=%s3 [%s4]
AHS: ERROR: ahs00539: SSL: Not enough memory in the SCMI library. [%s1]
AHS: ERROR: ahs00540: SSL: An error has occurred in the SCMI library function.(%s1,%s2) [%s3]
AHS: ERROR: ahs00599: SSL: Unexcepted error.(%s1,%s2,%s3,%s4) [%s5]
AHS: ERROR: ahs70004: (%s1)%s2:Cannot get enough memory
AHS: ERROR: ahs70005: (%s1)%s2:Error writing to log file. %s3 messages lost.
AHS: INFO: ahs70007: Log can now be output to the log file(%s1). (%s2)
AHS: INFO: ahs70008: The file was rotated because the file size of the log file(%s1) reached the upper limit of the system.
AHS: ERROR: ahs70009: The log could not be output because the file size of the log file reached the upper limit of the system.
AHS: INFO: ahs81001: HTTP Server is starting. [%s1]
AHS: INFO: ahs81002: HTTP Server is stopping. [%s1]
AHS: INFO: ahs81003: HTTP Server is restarting. [%s1]
AHS: ERROR: ahs81400: The file could not be opened. file=%s1, errno=%s2, %s3AHS: エラー: ahs81400: ファイルのオープンに失敗しました。:file=%s1, errno=%s2, %s3
AHS: ERROR: ahs81401: The file could not be read. file=%s1, errno=%s2, %s3AHS: エラー: ahs81401: ファイルの読み込みに失敗しました。:file=%s1, errno=%s2 ,%s3
AHS: ERROR: ahs81402: The environment definition contains an error. %s1AHS: エラー: ahs81402: 環境定義に誤りがあります。:%s1
AHS: ERROR: ahs81403: Memory could not be obtained. func=%s1, errno=%s2, %s3AHS: エラー: ahs81403: メモリの獲得に失敗しました。:func=%s1, errno=%s2, %s3
AHS: INFO: ahs81404: The backup processing has commenced.AHS: 情報: ahs81404: バックアップ処理を開始しました。
AHS: INFO: ahs81405: The backup processing has been completed normally.AHS: 情報: ahs81405: バックアップ処理を正常に完了しました。
AHS: ERROR: ahs81406: An error has been generated in the backup processing.AHS: エラー: ahs81406: バックアップ処理で異常が発生しました。
AHS: INFO: ahs81407: The restore processing has commenced.AHS: 情報: ahs81407: リストア処理を開始しました。
AHS: INFO: ahs81408: The restore processing has been completed normally.AHS: 情報: ahs81408: リストア処理を正常に完了しました。
AHS: ERROR: ahs81409: An error has been generated in the restore processing.AHS: エラー: ahs81409: リストア処理で異常が発生しました。
AHS: ERROR: ahs81410: The specification method of the option is incorrect.Usage: ahsbackup -d directory [-t pass|all]AHS: エラー: ahs81410: オプションの指定方法に誤りがあります。使用法: ahsbackup -d directory [-t pass|all]
AHS: ERROR: ahs81411: The specification method of the option is incorrect.Usage: ahsrestore -d directory [-t pass|all] [-h host_table]AHS: エラー: ahs81411: オプションの指定方法に誤りがあります。使用法: ahsrestore -d directory [-t pass|all] [-h host_table]
AHS: ERROR: ahs81412: The user who executed the command does not have execution rights.AHS: エラー: ahs81412: コマンドを実行したユーザが実行権限を持っていません。
AHS: ERROR: ahs81413: The environment definition file cannot be located. file=%s1, errno=%s2, %s3AHS: エラー: ahs81413: 環境定義ファイルが存在しません。 :file=%s1, errno=%s2, %s3
AHS: ERROR: ahs81414: The specified storage directory cannot be located. dir=%s1, errno=%s2, %s3AHS: エラー: ahs81414: 指定された格納先ディレクトリが存在しません。:dir=%s1, errno=%s2, %s3
AHS: ERROR: ahs81415: The path name of the directory to be created is too long. dir=%s1AHS: エラー: ahs81415: 作成するディレクトリのパス名が長すぎます。:dir=%s1
AHS: ERROR: ahs81416: The directory could not be created. dir=%s1, errno=%s2, %s3AHS: エラー: ahs81416: ディレクトリの作成に失敗しました。:dir=%s1, errno=%s2, %s3
AHS: ERROR: ahs81417: The backup resource management file cannot be located. file=%s1, errno=%s2, %s3AHS: エラー: ahs81417: バックアップ資源管理ファイルが存在しません。:file=%s1, errno=%s2, %s3
AHS: ERROR: ahs81418: Information on the backup resource management file has been destroyed. %s1AHS: エラー: ahs81418: バックアップ資源管理ファイルの情報が壊されています。:%s1
AHS: ERROR: ahs81419: The backup resource management file could not be created. file=%s1, errno=%s2, %s3AHS: エラー: ahs81419: バックアップ資源管理ファイルの作成に失敗しました。:file=%s1, errno=%s2, %s3
AHS: ERROR: ahs81420: The backup resource management file could not be written to. file=%s1, errno=%s2, %s3AHS: エラー: ahs81420: バックアップ資源管理ファイルへの書き込みに失敗しました。:file=%s1, errno=%s2, %s3
AHS: ERROR: ahs81421: The type of the destination drive for copying is not supported. drive=%s1, type=%s2AHS: エラー: ahs81421: 複写先のドライブの種類はサポートしていません。:drive=%s1, type=%s2
AHS: ERROR: ahs81422: The original file for copying cannot be located. file=%s1, errno=%s2, %s3AHS: エラー: ahs81422: 複写元のファイルが存在しません。:file=%s1, errno=%s2, %s3
AHS: ERROR: ahs81423: The required drive cannot be located at the destination for copying. drive=%s1AHS: エラー: ahs81423: 複写先に必要なドライブが存在しません。:drive=%s1
AHS: ERROR: ahs81424: The file could not be copied. from=%s1, to=%s2, errno=%s3, %s4AHS: エラー: ahs81424: ファイルの複写処理に失敗しました。:from=%s1, to=%s2, errno=%s3, %s4
AHS: ERROR: ahs81425: Specification of the resource storage directory contains an error. dir=%s1AHS: エラー: ahs81425: 資源格納先ディレクトリの指定に誤りがあります。:dir=%s1
AHS: ERROR: ahs81426: The resource storage directory could not be created. dir=%s1, errno=%s2, %s3AHS: エラー: ahs81426: 資源格納先ディレクトリの作成に失敗しました。:dir=%s1, errno=%s2, %s3
AHS: ERROR: ahs81427: The resource storage directory has already been located. dir=%s1AHS: エラー: ahs81427: 資源格納先ディレクトリがすでに存在します。:dir=%s1
AHS: ERROR: ahs81428: The directory under the resource storage directory cannot be located. dir=%s1, errno=%s2, %s3AHS: エラー: ahs81428: 資源格納先ディレクトリ配下のディレクトリが存在しません。:dir=%s1, errno=%s2, %s3
AHS: ERROR: ahs81429: The saved resource could not be deleted due to a backup processing error. func=%s1, errno=%s2, %s3AHS: エラー: ahs81429: バックアップ処理異常による退避済資源の削除に失敗しました。:func=%s1, errno=%s2, %s3
AHS: ERROR: ahs81430: An internal error has been generated. %s1AHS: エラー: ahs81430: 内部エラーが発生しました。:%s1
AHS: ERROR: ahs81431: Specification in the host convertible file contains an error. %s1AHS: エラー: ahs81431: ホスト名変換ファイルの記述内容に誤りがあります。:%s1
AHS: ERROR: ahs81432: The environment definition temporary file could not be written to. file=%s1, errno=%s2, %s3AHS: エラー: ahs81432: 環境定義用一時ファイルへの書き込みに失敗しました。:file=%s1, errno=%s2, %s3
AHS: ERROR: ahs81433: The name of the environment definition temporary file could not be changed. file=%s1, errno=%s2, %s3AHS: エラー: ahs81433: 環境定義用一時ファイルの変名に失敗しました。:file=%s1, errno=%s2, %s3
AHS: ERROR: ahs81434: ahsbackup or ahsrestore is already executing.AHS: エラー: ahs81434: ahsbackupコマンドまたはahsrestoreコマンドが実行中のため、処理できません。
AHS: ERROR: ahs81435: Processing cannot be performed because the Web server configuration is different.AHS: エラー: ahs81435: Webサーバの構成が異なるため、処理できません。
AHS: ERROR: ahs81439: Failed to write the file. : file=%s1, errno=%s2, %s3AHS: エラー: ahs81439: ファイルの書き込みに失敗しました。:file=%s1、errno=%s2、%s3
AHS: ERROR: ahs81440: Failed to close the file. : file=%s1, errno=%s2, %s3AHS: エラー: ahs81440: ファイルのクローズに失敗しました。:file=%s1、errno=%s2、%s3
AHS: ERROR: ahs81451: Failed to delete the file. : file=%s1, errno=%s2, %s3AHS: エラー: ahs81451: ファイルの削除に失敗しました。:file=%s1、errno=%s2、%s3
AHS: ERROR: ahs81452: Processing cannot be performed because the install information of the service is different. Service name:%s1AHS: エラー: ahs81452: サービスの登録情報が異なるため、処理できません。サービス名:%s1
AHS: ERROR: ahs81453: The Web server cannot be restored because the service is running. Service name:%s1AHS: エラー: ahs81453: サービスは起動中のため、リストアできません。サービス名:%s1
(%s1)%s2: %s3 failed. Attempting to shutdown process gracefully.
(%s1)%s2: apr_socket_accept: giving up.
(%s1)%s2: Couldn't create accept lock
(%s1)%s2: Couldn't initialize cross-process lock in child
(%s1)%s2: Couldn't initialize signal thread
(%s1)%s2: Couldn't set permissions on cross-process lock; check User and Group directives
(%s1)%s2: OpenEvent on %s3 event
(%s1)%s2: SetEvent on %s3 event
%s1: Could not reliably determine the server's fully qualified domain name, using %s2 for ServerName
(%s1)%s2: ap_queue_info_create() failed
(%s1)%s2: ap_queue_init() failed
(%s1)%s2: apr_thread_create: unable to create listener thread
(%s1)%s2: apr_thread_create: unable to create worker thread
(%s1)%s2: Cannot chroot when not started as root
(%s1)%s2: Can't chdir to %s3
(%s1)%s2: Can't chdir to new root
(%s1)%s2: Can't chroot to %s3
(%s1)%s2: getpwuid: couldn't determine user name from uid %s3, you probably need to modify the User directive
(%s1)%s2: initgroups: unable to set groups for User %s3 and Group %s4
(%s1)%s2: malloc: out of memory
(%s1)%s2: mod_unique_id: unable to find hostname of the server
(%s1)%s2: mod_unique_id: unable to find IPv4 address of "%s3"
(%s1)%s2: set dumpable failed - this child will not coredump after software errors
(%s1)%s2: setgid: unable to set group id to Group %s3
(%s1)%s2: setuid: unable to change to uid: %s3
Child %s1 returned a Fatal error... Apache is exiting!
No active workers found... Apache is exiting!
no listening sockets available, shutting down
refusing to send signal %s1 to pid %s2 outside process group
(%s1)%s2: %s3: Failed to start the service process.
(%s1)%s2: %s3: Unable to start the service manager.
(%s1)%s2: alloc_listener: failed to get a socket for %s3
(%s1)%s2: alloc_listener: failed to set up sockaddr for %s3
(%s1)%s2: ap_queue_pop failed
(%s1)%s2: ap_queue_push failed
(%s1)%s2: apr_proc_detach failed
(%s1)%s2: apr_thread_join: unable to join %s3
(%s1)%s2: cannot allocate scoreboard
(%s1)%s2: Child %s3: _beginthreadex failed. Unable to create all worker threads. Created %s4 of the %s5 threads requested with the ThreadsPerChild configuration directive.
(%s1)%s2: Child %s3: Failed to create a %s4 event.
(%s1)%s2: Child %s3: setup_inherited_listeners(), WSASocket failed to open the inherited socket.
(%s1)%s2: Child %s3: Unable to access the scoreboard from the parent
(%s1)%s2: Child %s3: Unable to access the start_mutex from the parent
(%s1)%s2: Child %s3: Unable to reopen the scoreboard from the parent
(%s1)%s2: Child %s3: Unable to retrieve the exit event from the parent
(%s1)%s2: Child %s3: Unable to retrieve the ready event from the parent
(%s1)%s2: Child %s3: Unable to retrieve the scoreboard from the parent
(%s1)%s2: Child %s3: Unable to retrieve the start_mutex from the parent
(%s1)%s2: Child %s3: WAIT_FAILED -- shutting down server
(%s1)%s2: Could not open pipe-of-death.
(%s1)%s2: Failed to get the full path of %s3
(%s1)%s2: Fatal error: Invalid Scoreboard path %s3
(%s1)%s2: Fatal error: unable to create global pool for use with by the scoreboard
(%s1)%s2: Invalid -E error log file %s3
(%s1)%s2: Invalid config file path %s3
(%s1)%s2: Invalid PID file path %s3, ignoring.
(%s1)%s2: make_sock: could not bind to address %s3
(%s1)%s2: make_sock: for address %s3, apr_socket_opt_set: (%s4)
(%s1)%s2: master_main: create child process failed. Exiting.
(%s1)%s2: master_main: WaitForMultipeObjects WAIT_FAILED -- doing server shutdown
(%s1)%s2: mod_rewrite: Parent could not create RewriteLock file %s3
(%s1)%s2: mod_rewrite: Parent could not set permissions on RewriteLock; check User and Group directives
(%s1)%s2: Parent: Cannot create %s3 event %s4
(%s1)%s2: Parent: Could not create %s3 event for child process
(%s1)%s2: Parent: Failed to create the child process.
(%s1)%s2: Parent: Failed to get full path of %s3
(%s1)%s2: Parent: Failed to get the current path
(%s1)%s2: Parent: Unable to create child stdin pipe.
(%s1)%s2: Parent: Unable to duplicate the %s3 handle for the child
(%s1)%s2: Parent: Unable to duplicate the start mutex to the child
(%s1)%s2: Parent: Unable to retrieve the %s3 for the child
(%s1)%s2: Parent: Unable to send the %s3 to the child
(%s1)%s2: Parent: Unable to write duplicated socket %s3 to the child.
(%s1)%s2: Parent: WSADuplicateSocket failed for socket %s3. Check the FAQ.
(%s1)%s2: read: rfc1413: error reading response
(%s1)%s2: rfc1413: apr_sockaddr_info_get(%s3) failed
(%s1)%s2: rfc1413: Error binding query socket to local port
(%s1)%s2: rfc1413: error creating query socket
(%s1)%s2: rfc1413: error setting query socket timeout
(%s1)%s2: setup_inherited_listeners: Unable to read socket data from parent
(%s1)%s2: unable to create or access scoreboard "%s3" (name-based shared memory failure)
(%s1)%s2: Unable to create or access scoreboard (anonymous shared memory failure)
(%s1)%s2: unable to replace stderr with %s3
(%s1)%s2: write: rfc1413: error sending request
[%s1] file %s2, line %s3, assertion "%s4" failed
[client %s1] (%s2)%s3: %s4 pcfg_openfile: unable to check htaccess file, ensure it is readable
[client %s1] configuration error: couldn't %s2: %s3
Fatal error: shared scoreboard too small for child!
Parent: child process exited with status %s1 -- Aborting.
%s1: could not log pid to file %s2
%s1: Service is already installed.
%s1 not supported on this platform
(%s1)%s2: %s3: Failed to delete the service.
(%s1)%s2: %s3: Failed to open the service.
(%s1)%s2: %s3: Failed to store the ConfigArgs in the registry.
(%s1)%s2: %s3: getrlimit failed
(%s1)%s2: %s3: OpenService failed
(%s1)%s2: %s3: Unable to create the start_mutex.
(%s1)%s2: %s3: Unable to start the service manager.
(%s1)%s2: access to %s3 failed; stat of '%s4' failed.
(%s1)%s2: apr_pollset_poll: (listen)
(%s1)%s2: apr_socket_accept: (client socket)
(%s1)%s2: ChangeServiceConfig failed
(%s1)%s2: Child %s3: Encountered too many errors accepting client connections. Possible causes: %s4. Try using the Win32DisableAcceptEx directive.
(%s1)%s2: Child %s3: Failed to acquire the start_mutex. Process will exit.
(%s1)%s2: Child %s3: Failure releasing the start mutex
(%s1)%s2: could not create %s3
(%s1)%s2: could not open mime types config file %s3.
(%s1)%s2: could not open transfer log file %s3.
(%s1)%s2: Could not resolve host name %s3 -- ignoring!
(%s1)%s2: Error starting service control dispatcher
(%s1)%s2: Failed to create WinNT Service Profile
(%s1)%s2: Failed to open the %s3 Service
(%s1)%s2: Failed to open the %s3 Service Manager
(%s1)%s2: Failed to resolve server name for %s3 (check DNS) -- or specify an explicit ServerName
(%s1)%s2: Failure registering service handler
(%s1)%s2: fork: Unable to fork new process
(%s1)%s2: GetModuleFileName failed
(%s1)%s2: Invalid mime types config path %s3
(%s1)%s2: invalid transfer log path %s3.
(%s1)%s2: ISAPI: could not create the isapi cache pool
(%s1)%s2: make_sock: unable to listen for connections on address %s3
(%s1)%s2: master_main: WaitForMultipeObjects with INFINITE wait exited with WAIT_TIMEOUT
(%s1)%s2: No installed service named "%s3".
(%s1)%s2: OpenService failed
(%s1)%s2: Parent: Could not set child process stderr
(%s1)%s2: Parent: Could not set child process stdout
(%s1)%s2: Parent: ResetEvent(restart_event) failed.
(%s1)%s2: Parent: SetEvent for child process %s3 failed.
(%s1)%s2: proxy: %s3: attempt to connect to %s4:%s5 (%s6) failed
(%s1)%s2: proxy: prefetch request body failed to %s3 (%s4) from %s5 (%s6)
(%s1)%s2: Query of Service %s3 failed
(%s1)%s2: ResetEvent(shutdown_event)
(%s1)%s2: Service %s3 is already started!
(%s1)%s2: set_listeners_noninheritable: SetHandleInformation failed.
(%s1)%s2: SSL: Failed to generate the certificate monitoring daemon. func=%s3
(%s1)%s2: unable to control socket non-blocking status
(%s1)%s2: winnt_accept: getsockname error on listening socket, is IPv6 available?
[client %s1] (%s2)%s3: access to %s4 denied
[client %s1] (%s2)%s3: access to %s4 failed
[client %s1] (%s2)%s3: ap_content_length_filter: apr_bucket_read() failedまたは、[client %s1] (%s2)%s3: ap_content_length_filter: apr_bucket_read() failed, referer: %s4
[client %s1] (%s2)%s3: Cannot map %s4 to file
[client %s1] (%s2)%s3: copy_brigade_range() failed [%s4-%s5,%s6]
[client %s1] (%s2)%s3: core_output_filter: Error reading from bucket.
[client %s1] (%s2)%s3: dir_walk error, could not determine the root path of filename %s4%s5 for uri %s6
[client %s1] (%s2)%s3: dir_walk error, path_info %s4 is not relative to the filename path %s5 for uri %s6
[client %s1] (%s2)%s3: Error reading request entity data
[client %s1] (%s2)%s3: file permissions deny server access: %s4
[client %s1] (%s2)%s3: proxy: error reading status line from remote server %s4:%s5または、[client %s1] (%s2)%s3: proxy: error reading status line from remote server %s4:%s5, referer: %s6
[client %s1] access to %s2 failed, reason: user '%s3' does not meet 'require'ments for user/valid-user to be allowed access
[client %s1] ap_get_server_name: Invalid UCN Option somehow
[client %s1] ap_get_server_port: Invalid UCN Option somehow
[client %s1] Attempt to serve directory: %s2
[client %s1] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): %s2
[client %s1] client sent invalid HTTP/0.9 request: HEAD %s2
[client %s1] Client sent malformed Host header
[client %s1] client used wrong authentication scheme: %s2
[client %s1] Could not get next bucket brigade [500, #0]
[client %s1] Directory index forbidden by Options directive: %s2
[client %s1] File does not exist: %s2
[client %s1] Forbidden: %s2 doesn't point to a file or directory
[client %s1] Invalid method in request %s2
[client %s1] Invalid URI in request %s2
[client %s1] malformed header from script. Bad header=%s2: %s3
[client %s1] meta file permissions deny server access: %s2
[client %s1] need AuthName: %s2
[client %s1] Negotiation: discovered file(s) matching request: %s2 (None could be negotiated).
[client %s1] Premature end of script headers: %s2
[client %s1] proxy: %s2 returned by %s3
[client %s1] Request exceeded the limit of %s2 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace.
[client %s1] Request exceeded the limit of %s2 subrequest nesting levels due to probable confguration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace.
[client %s1] request failed: error reading the headers
[client %s1] request failed: URI too long (longer than %s2)
[client %s1] script not found or unable to stat: %s2
[client %s1] Script timed out before returning headers: %s2
[client %s1] SSL: Alert message(what?).(%s2,%s3,%s4)
[client %s1] SSL: apr_base64_encode error.(%s2,%s3)
[client %s1] SSL: apr_base64_encode_len error.(%s2)
[client %s1] SSL: Authority error.(%s2,%s3,%s4)
[client %s1] SSL: Certificate is invalid.(%s2,%s3,%s4)
[client %s1] SSL: Certificate_unknown alert message was received. (%s2,%s3,%s4)
[client %s1] SSL: Cipher handshake error.(%s2,%s3,%s4)
[client %s1] SSL: Couldn't analyze the client CA certificate.(%s2,%s3,%s4)
[client %s1] SSL: Couldn't analyze the client certificate.(%s2,%s3,%s4)
[client %s1] SSL: Couldn't get client cert.
[client %s1] SSL: Couldn't verify the client CA certificate.(%s2,%s3,%s4)
[client %s1] SSL: Couldn't verify the client certificate.(%s2,%s3,%s4)
[client %s1] SSL: Error message received(illegal certificate).(%s2,%s3,%s4)
[client %s1] SSL: Illegal access protocol.(%s2,%s3,%s4)
[client %s1] SSL: MAC verify error.(%s2,%s3,%s4)
[client %s1] SSL: No client certificate.(%s2,%s3,%s4)
[client %s1] SSL: Not enough memory for base64 encoding.(%s2)
[client %s1] SSL: SCMI Insufficient memory
[client %s1] SSL: SCMI_Expand failed.(%s2,...%sn)
[client %s1] SSL: SCMI_Login failed.(%s2,...%sn)
[client %s1] SSL: SCMI_Logout failed.(%s2,...%sn)
[client %s1] SSL: Socket access error(%s2).(%s3,%s4,%s5)
[client %s1] SSL: The client CA certificate has been revoked.(%s2,%s3,%s4)
[client %s1] SSL: The client CA certificate has no path list.(%s2,%s3,%s4)
[client %s1] SSL: The client CA certificate path is invalid.(%s2,%s3,%s4)
[client %s1] SSL: The client certificate has been revoked.(%s2,%s3,%s4)
[client %s1] SSL: The client certificate has expired.(%s2,%s3,%s4)
[client %s1] SSL: The client certificate has no path list.(%s2,%s3,%s4)
[client %s1] SSL: The client certificate path is invalid.(%s2,%s3,%s4)
[client %s1] SSL: Timeout.(%s2,%s3,%s4)
[client %s1] SSL: Unacceptable client certificate.(%s2,%s3,%s4)
[client %s1] SSL: Unexcepted error.(%s2,%s3,%s4)
[client %s1] Symbolic link not allowed or link target not accessible: %s2
[client %s1] This resource does not accept the %s2 method.
Access to file %s1 denied by server: not a regular file
Cannot remove module %s1: not found in module list
child process %s1 still did not exit, sending a SIGKILL
Configuration Failed
could not make child process %s1 exit, attempting to continue anyway
Handler for %s1 returned invalid result code %s2
Internal error: pcfg_openfile() called with NULL filename
Invalid parameters for %s1
Must be uid 0 to raise maximum %s1
need AuthName: %s1
need AuthType to note auth failure: %s1
Pre-configuration failed
server is within MinSpareThreads of MaxClients, consider raising the MaxClients setting
server reached MaxClients setting, consider raising the MaxClients setting
SSL: An error has occurred in the SCMI library function.(%s1,%s2,%s3,%s4,%s5,%s6,%s7,%s8,%s9,%s10,%s11,%s12,%s13)
SSL: Not enough memory in the SCMI library.
SSL: SSL definition acquisition failed.(%s1,SCS_DecryptPassword,%s2)
SSL: SSL definition acquisition failed.(%s1,SCS_GetSSLConf,%s2)
SSL: SSL definition acquisition failed.(%s1,SCS_GetSSLConf,certconf==NULL)
SSL: SSL definition name specification is invalid.(%s1)
Unable to open logs
VirtualHost %s1:%s2 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
%s1: apr_gethostname() failed to determine ServerName
%s1: apr_sockaddr_info_get() failed for %s2
(%s1)%s2: connect to listener on %s3
(%s1)%s2: disk_cache: rename tempfile to datafile failed: %s3 -> %s4
(%s1)%s2: Failed to enable APR_TCP_DEFER_ACCEPT
(%s1)%s2: Failed to enable the '%s3' Accept Filter
(%s1)%s2: make_sock: failed to set ReceiveBufferSize for address %s3, using default
(%s1)%s2: make_sock: failed to set SendBufferSize for address %s3, using default
(%s1)%s2: mpm_get_completion_context: CreateEvent failed.
(%s1)%s2: mpm_get_completion_context: Failed to create the transaction pool.
(%s1)%s2: No installed ConfigArgs for the service "%s3", using Apache defaults.
(%s1)%s2: setsockopt(SO_UPDATE_ACCEPT_CONTEXT) failed.
(%s1)%s2: sigaction(%s3)
(%s1)%s2: winnt_accept: Asynchronous AcceptEx failed.
(%s1)%s2: winnt_accept: Failed to allocate an accept socket. Temporary resource constraint? Try again.
(%s1)%s2: write pipe_of_death
[client %s1] handler "%s2" not found for: %s3
_default_ VirtualHost overlap on port %s1, the first has precedence
child process %s1 still did not exit, sending a SIGTERM
integer overflow or out of memory condition.
Limiting internal redirects to very low numbers may cause normal requests to fail.
Limiting the subrequest depth to a very low level may cause normal requests to fail.
long lost child came home! (pid %s1)
NameVirtualHost %s1:%s2 has no VirtualHosts
pid file %s1 overwritten -- Unclean shutdown of previous Apache run?
Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting
SSL: The CA certificate validity term has expired.(%s1,%s2/%s3/%s4 %s5:%s6:%s7)
SSL: The CA certificate will expire in %s1 days.(%s2,%s3/%s4/%s5 %s6:%s7:%s8)
SSL: The site certificate validity term has expired.(%s1,%s2/%s3/%s4 %s5:%s6:%s7)
SSL: The site certificate will expire in %s1 days.(%s2,%s3/%s4/%s5 %s6:%s7:%s8)
VirtualHost %s1:%s2 overlaps with VirtualHost %s3:%s4, the first has precedence, perhaps you need a NameVirtualHost directive
WARNING: Attempt to change ServerLimit or ThreadLimit ignored during restart
WARNING: Attempt to change ThreadLimit ignored during restart
%s1 configured -- resuming normal operations
cannot use a full URL in a 401 ErrorDocument directive --- ignoring!
caught SIGTERM, shutting down
caught SIGWINCH, shutting down gracefully
Child %s1: Acquired the start mutex.
Child %s1: All worker threads have exited.
Child %s1: Child process is exiting
Child %s1: Child process is running
Child %s1: Exit event signaled. Child process is ending.
Child %s1: Process exiting because it reached MaxRequestsPerChild. Signaling the parent to restart a new child process.
Child %s1: Released the start mutex
Child %s1: Starting %s2 worker threads.
Child %s1: Starting thread to listen on port %s2.
Child %s1: Terminating %s2 threads that failed to exit.
Child %s1: Waiting %s2 more seconds for %s3 worker threads to finish.
child pid %s1 exit signal %s2 (%s3)
child pid %s1 exit signal %s2 (%s3), possible coredump in %s4
Disabled use of AcceptEx() WinSock2 API
Parent: Child process exited successfully.
Parent: child process exited with status %s1 -- Restarting.
Parent: Created child process %s1
Parent: Forcing termination of child process %s1
Parent: Received restart signal -- Restarting the server.
Parent: Received shutdown signal -- Shutting down the server.
seg fault or similar nasty error detected in the parent process
Server built: %s1
SIGHUP received. Attempting to restart
SIGUSR1 received. Doing graceful restart
メッセージ集の先頭へ