KJU0000I END OF JOB. RETURN CODE WAS rtcd
KJU0001I VOL=volser
KJU0002I MFTF CONTROL DSNAME=dsn
KJU0003I SLICE CONTROL DSNAME=dsn
KJU0004I SLICE DSNAME=dsn
KJU0005I SPACE DSNAME=dsn
KJU0006I THE FOLLOWING DATA IS SYSIN
KJU0007I UNIT=unit
KJU0008I 16 PARTITIONS ARE CREATED
KJU0010I progname HAS BEEN SUCCESSFULLY COMPLETED
KJU0011I RETURN CODE FROM FILTER COMMAND=filtrtcd
KJU0020E progname HAS TERMINATED WITH PREVIOUS ERROR
KJU0021E progname HAS TERMINATED WITH WARNING
KJU0030E TARGET DISK IS USED BY ANOTHER
KJU0090E TARGET DISK SPACE IS TOO SMALL
KJU0100E INVALID EXEC PARAMETER | PARAMETER STATEMENT
KJU0101E INITIALIZATION NEEDED BY VvvLll
KJU0102E INVALID PARAMETER
KJU0103E LOGICAL VOLUME IS INVALID
KJU0104E VTOC IS INVALID
KJU0105E DYNALLOC ERROR:ERROR CODE=ercd INFORMATION CODE=infc
KJU0106E UNIT IS INVALID
KJU0107E OPEN MACRO FAILED { DDNAME=ddn｜FDNAME=fdn }
KJU0108E INVALID FORMAT
KJU0109E INVALID DATA LENGTH
KJU0110E LOAD MACRO FAILED
KJU0111E I/O ERROR IS OCCURRED
KJU0112E DO NOT SUPPORT DATASET
KJU0113E GETMAIN MACRO FAILED
KJU0114E UNIT IS OFFLINE
KJU0115E KJUAMFTF INTERNAL ERROR: MC=demdname RC=rc DC=dc
KJU0116E SERVER REFUSED TO TRANSFER DATA
KJU0117E THE SOURCE DATA TO TRANSFER DOES NOT EXIST IN SERVER SYSTEM
KJU0118E THE FILTER COMMAND CANNOT BE EXECUTED
KJU0119E LOGON FAILURE: UNKNOWN USER NAME
KJU0121E PARTITION IS IN USE
KJU0122E UNIT IS BROKEN
KJU0123E CONTROL DATASET IS INVALID
KJU0124E CONTROL DATASET NOT FOUND
KJU0140E SPECIFIED SLICE SIZE IS INVALID
KJU0141E DEFCL EXCEEDES MAXIMUM
KJU0142E DEFSV EXCEEDES MAXIMUM
KJU0143E DUPULICATE CLIENT NAME
KJU0144E DUPULICATE SERVER NAME
KJU0145E TARGET CLIENT NOT FOUND
KJU0146E TARGET SERVER NOT FOUND
KJU0150E CLIENT/SERVER PAIR IS INVALID:CLIENT NAME=clname
KJU0200E MFTF TIMEOUT OCCURRED
KJU0300E MFTF DAEMON ERROR:ERROR CODE=ercd [COMMAND ERROR CODE = rtcd]
KJU0400W THERE WAS A SYNTAX ERROR IN THE KJUAMFTF INITIALIZATION PARAMETER
KJU5001E THERE WAS AN ERROR IN THE SYNTAX OF THE XL-DATAMOVER CONTROL STATEMENTS
KJU5002E INVALID PARAMETER IN OPERAND OF parmname CONTROL STATEMENT
KJU5100I XL-DATAMOVER STARTED
KJU5101I COMMAND ACCEPTED
KJU5102E COMMAND IS REJECTED
KJU5103I XL-DATAMOVER STOPPED
KJU5104I XL-DATAMOVER STOPPED FORCIBLY
KJU5105I XL-DATAMOVER STOPPED ABNORMALLY
KJU5106E AREA SHORTAGE DETECTED
KJU5107E LINKLIB READ ERROR
KJU5108E SYSIN DD STATEMENT IS NOT SPECIFIED
KJU5109E OPENING ERROR OF SYSIN DATASET
KJU5110E COLLECTING THE SYSTEM DUMP FAILED-ec
KJU5111I COLLECTING THE SYSTEM DUMP HAS BEEN COMPLETED
KJU5112E START METHOD IS INVALID
KJU5113E DATA EXCHANGE ERROR OCCURRED(demdname) CODE=rcdc DCODE=dtcd VOL=volume
KJU5114E HOST NAME WAS INVALID
KJU5115E XL-DATAMOVER TASK STOPPED ABNORMALLY
KJU5116E TARGET VOLUME WAS NONE
KJU5120E VOLUME IS IN USE VOL=volser DSN=dsn
KJU5121E INVALID PARAMETER IS SPECIFIED
KJU5200E AREA SHORTAGE DETECTED UID=userid
KJU5201E ALLOCATION ERROR OCCURRED ECODE=rc-ercd UID=userid DSN=dsn
KJU5202E I/O ERROR OCCURRED UID=userid DSN=dsn
KJU5203E INSUFFICIENT SPACE FOR DATASET UID=userid DSN=dsn
KJU5204E DATASET WAS USED UID=userid DSN=dsn
KJU5205E DATA EXCHANGE ERROR OCCURRED(demdname) CODE=rcdc VOL=volume
KJU5206E DATA EXCHANGE ERROR OCCURRED(demdname) UID=userid CODE=rcdc DCODE=dtcd VOL=volume
KJU5207I DATA EXCHANGE HAS BEEN COMPLETED(RECEIVE) DSN=dsn
KJU5208I DATA EXCHANGE HAS BEEN COMPLETED(SEND) DSN=dsn
KJU5300I DISPLAY BEGINS : hh.mm.ss
KJU5301I DISPLAY ENDS
KJU5302I CONTINUE
KJU5303E DISPLAY ABNORMAL ENDS
KJU5304E COMMAND SYNTAX ERROR
KJU5305E AREA SHORTAGE DETECTED
KJU5306E XL-DATAMOVER VOLUME ERROR CODE=rtcd DCODE=dtcd
KJU5307W ALL PARTITION WAS EMPTY
KJU1000 normally ended : #device
KJU1001 mftfd #vl started : #device
KJU1002 usage : mftfd [-t] [-m] -start device mftfd -{ stop｜kill } device mftfd -{ h｜v｜stopall｜killall }
KJU1003 mftfd version #vl
KJU1004 version level don't match : #device
KJU1005 invalid path
KJU1006 device check error : #device - #sysmsg
KJU1007 no such device or not raw device
KJU1008 not super user
KJU1009 lock failed [ - #sysmsg ]
KJU1010 initialization needed : #device
KJU1011 no active daemon
KJU1012 already started : #device
KJU1100 abnormally ended : #device [ #no. ]
KJU1101 data transfer timeout : { #device [ #no. ]｜#filename #device [ #no. ] }
KJU1102 data transfer stopped unexpectedly : #device [ #no. ]
KJU1200 device open error : #device - #sysmsg
KJU1201 device seek error : #device [ - #sysmsg ] [ #no. ]
KJU1202 device read error : #device [ - #sysmsg ] [ #no. ]
KJU1203 device write error : #device [ - #sysmsg ] [ #no. ]
KJU1300 file open error : { #filename [ - #sysmsg ] [ #device ] [ #no. ] | #filename [ #device ] [ - #sysmsg ] [ #no. ] }
KJU1301 file read error : #filename [ - #sysmsg ] [ #device ] [ #no. ]
KJU1302 file write error : { #device [ - #sysmsg ] [ #no. ] | #filename [ - #sysmsg ] #device }
KJU1400 memory insufficient - #sysmsg
KJU1401 can't create child process : #device - #sysmsg
KJU1402 can't turn into daemon : #device - #sysmsg
KJU1403 can't change into directory : #dirname - #sysmsg
KJU1404 can't find directory : #dirname
KJU1405 can't open directory : #dirname - #sysmsg
KJU1500 access denied : #account #device [ #no. ]
KJU1501 wrong umask : #account #device [ #no. ]
KJU1600 can't create pipe : #device [ - #sysmsg ] [ #no. ]
KJU1601 can't dup open file : #device [ - #sysmsg ] [ #no. ]
KJU1602 can't close file : #device [ - #sysmsg ] [ #no. ]
KJU1603 can't execute filter command : #device [ - #sysmsg ] [ #no. ]
KJU1604 filter command stopped unexpectedly : #device [ #no. ]
KJU1605 filter command error : #device [ #no. ] [ - #errmsg ]
KJU1606 filter command timeout : #device [ #no. ]
KJU1607 can't fork for filter command : #device [ - #sysmsg ] [ #no. ]
KJU1700 can't get filter command return code : #disknumber [ - #sysmsg ] #no.
KJU1701 child process aborted : #disknumber #no.
KJU1702 can't get path of mftf.ini : #disknumber [ - #sysmsg ] #no.
KJU1800 received normally from logical unit to file : [ #filename ]
KJU1801 received with warning from logical unit to file : [ #filename ]
KJU1802 sent normally from file : [ #filename ] to logical unit
KJU1803 sent with warning from file : [ #filename ] to logical unit
KJU1810 syntax error : [ #filename ] [: FILTER=#filtrtcode ]
KJU1811 function failed : #sysfunc [ - #sysmsg ]
KJU1855 The change of updated time failed : #filename [ - #sysmsg ] #device
KJU1856 The change of file owner and group failed : #filename [ - #sysmsg ] #device
KJU1857 The change of file permission failed : #filename [ - #sysmsg ] #device
KJU1900 internal error(FUNC=#demdname,DETCODE=#detcode) : #device [ - #sysmsg ] #no.
KJU1901 device error(FUNC=#demdname DETCODE=#detcode) : #device [ - #sysmsg ] #no.
KJU1902 parameter error (#itemname)
KJU1903 can not execute filter command because of inexistence or forbiddance [ : #command ]
KJU1904 file which is to be read does not exist
KJU1905 return code parameters are in error
KJU1906 can not create directory : DIR=#dirname [ - #sysmsg ]
KJU1907 data transfer has stopped due to an error in client system : #device #no.
KJU2000 XL-LINK/Datamover Service installed.
KJU2001 XL-LINK/Datamover Service removed.
KJU2002 XL-LINK/Datamover Service VxxLxx All Rights Reserved ,Copyright (c) Fujitsu Limited #yyyy [ -#yyyy ]. Usage : mftfd.exe <-i> | <-r> i - To install the service r - To remove the service
KJU2003 Unable to install XL-LINK/Datamover Service - #sysmsg
KJU2004 OpenSCManager failed - #sysmsg
KJU2005 CreateService failed - #sysmsg
KJU2006 OpenService failed - #sysmsg
KJU2007 DeleteService failed - #sysmsg
KJU2008 Service failed - sysfunc : #sysmsg
KJU2100 Detected internal contradiction #sysmsg error point : #errpoint
KJU2101 Application initialization error occurred #sysmsg error point : #errpoint
KJU2102 Registry access error occurred #sysmsg error point : #errpoint
KJU2103 Device access error occurred #sysmsg error point : #errpoint
KJU2104 Disk tree control error occurred #sysmsg error point : #errpoint
KJU2105 Initialization information list control error occurred #sysmsg error point : #errpoint
KJU2106 Can't allocate memory #sysmsg error point : #errpoint
KJU2110 Disk access error occurred. Disk No. = #disknumber #sysmsg error point : #errpoint
KJU2111 Disk access error occurred : Disk No. #disknumber #sysmsg error point : #errpoint
KJU2200 get current directory failed #sysmsg
KJU2201 create key : [ #key ] failed #sysmsg
KJU2202 set key value : [ #data ] failed #sysmsg
KJU2203 delete key : [ #key ] failed #sysmsg
KJU2300 installation failed - sysfunc : #sysmsg [ #filename ]
KJU3000 #command has completed successfully
KJU3001 Permission denied
KJU3002 Specified parameter is invalid
KJU3003 Specified volume is invalid [ #sysmsg ]
KJU3004 Specified file is invalid
KJU3005 Specified client is invalid
KJU3006 Specified server is invalid
KJU3007 Specified device is invalid
KJU3008 Volume I/O error occurred [ #sysmsg ]
KJU3009 Partition is in use
KJU3010 The format of the volume is invalid
KJU3011 The data of the volume is broken
KJU3012 Specified file has not been found
KJU3013 Specified file does not have data
KJU3015 I/O error occurred in specified file #sysmsg
KJU3016 CLNAME is invalid : line #lineno
KJU3017 SVNAME is invalid : line #lineno
KJU3018 PATH or DRIVE is invalid : line #lineno
KJU3019 The client information block has invalid data : line #lineno
KJU3020 The number of clients is invalid [ : line #lineno ]
KJU3021 The number of servers is invalid : line #lineno
KJU3025 Duplicate client name : line #lineno
KJU3026 Duplicate server name : line #lineno
KJU3027 There is a server name which is the same as client name : line #lineno
KJU3028 Can't add client because the number of specified clients reaches maximum
KJU3029 Can't add server because the number of specified servers reaches maximum
KJU3030 Specified client name is dupulicate
KJU3031 Specified server name is dupulicate
KJU3032 Specified client name is the same as server name
KJU3035 Can't change information on client which does not exist
KJU3036 Can't change information on server which does not exist
KJU3037 Wrong in change
KJU3038 Can't allocate memory #sysmsg
KJU3039 Temporary file I/O error occurred #sysmsg
KJU3040 Devices directory I/O error occurred #sysmsg
KJU3041 Command stopped unexpectedly #sysmsg
KJU4001 Construction of command has mistake : #value-name : [ #sysmsg | system error code : #syscode ]
KJU4002 File not found.
KJU4003 Access to client resource is denied.
KJU4004 Data transfer was interrupted.
KJU4005 User who executed the command does not belong to Administrators group.
KJU4006 The user cannot use the applicable function.
KJU4090 Internal error occurred the following : [ #sysmsg | system error code : #syscode ]
KJU4091 Communication area is invalid.
KJU4101 Not enough memory to transfer data.
KJU4102 Data transfer timeout.
KJU4103 Server refused to transfer data.
KJU4104 Device error occurred the following : #functionname returned detail code : #detcode [ #sysmsg | system error code : #syscode ].
KJU4190 Internal error occurred the following : function : #functionname returned detail code : #detcode [ #sysmsg | system error code : #syscode ].
KJU4201 Logon failure : unknown user name or bad password.
KJU4202 The filter command cannot be executed.
KJU4203 The source data to transfer does not exist in server system.
KJU4204 The terminate code of line is invalid.
KJU4240 The volume is invalid.
KJU4241 The record length is invalid.
KJU4242 The block size is invalid.
KJU4243 The number of block is invalid.
KJU4244 The file name is invalid.
KJU4245 The length of line in data to transfer differs in the record length.
KJU4246 The user name or password is invalid.
KJU4247 The specified operation for unused space is invalid.
KJU4280 The filter command successfully completed, code : #filtrtcode .
KJU4281 The filter command terminated with warning, code : #filtrtcode .
KJU4282 The filter command terminated with error, code : #filtrtcode .
KJU4283 Server error occurred the following : filter command returned #filtrtcode .
KJU4290 Server error occurred, error code : #errcode .
KJU4300 The updated time of the sent file and received file are the same.
KJU4301 Data transfer was successful, but applicable function was not able to be used.
KJU4302 Destination file was updated after updating source file.
KJU4305 The change of updated time failed : [ #sysmsg | system error code : #syscode ]
KJU4306 The change of file owner and group failed : [ #sysmsg | system error code : #syscode ]
KJU4307 The change of file permission failed : [ #sysmsg | system error code : #syscode ]
KJU4500 Syntax error.
KJU4501 Invalid parameter : #parm
KJU4502 Failed to access a directory or a file : #cause #name - #sysmsg
KJU4503 Specified Volume is in the V10 format.
KJU4504 The format of specified Volume is invalid.
KJU4505 There is no Volume.
KJU4506 Invalid format : #area
KJU6000 access error for #filename : #cause - #sysmsg
KJU6001 setting error for #filename : #cause
KJU6002 failed to create directory - #sysmsg
KJU6003 output error for #filename : #cause - #sysmsg
KJU6004 target file changed from #old_filename to #new_filename
KJU6005 output #filename
KJU6006 internal error : FUNC=#functionname
メッセージ集の先頭へ
