This section describes how to configure servers and chassis for Resource Orchestrator.
Set it according to the value decided in "8.1 Defining the Server Environment" as follows.
Configuring Blade Servers
For details, refer to "8.2.1 Configuring Blade Servers".
Configuring Rack Mount and Tower Servers
For details, refer to "8.2.2 Configuring Rack Mount and Tower Servers".
Settings for PRIMEQUEST
For details, refer to "8.2.3 Configuring PRIMEQUEST".
Configuring SPARC Enterprise M3000 and SPARC M10-1/M10-4/M12-1/M12-2
Please refer to the following.
"8.2.4 Configuring SPARC Enterprise M3000 and SPARC M10-1/M10-4/M12-1/M12-2/M12-1/M12-2"
"8.2.9 Configuring OBP (Open Boot Prom) Settings (SPARC M10/M12 and SPARC Enterprise)"
Configuring SPARC Enterprise M4000/M5000/M8000/M9000 and SPARC M10-4S/M12-2S
Please refer to the following.
"8.2.5 Configuring SPARC Enterprise M4000/M5000/M8000/M9000 and SPARC M10-4S/M12-2S/M12-2S"
"8.2.9 Configuring OBP (Open Boot Prom) Settings (SPARC M10/M12 and SPARC Enterprise)"
Settings for SPARC Enterprise T Series
Please refer to the following.
"8.2.6 Configuring SPARC Enterprise T5120/T5140/T5220/T5240/T5440"
"8.2.9 Configuring OBP (Open Boot Prom) Settings (SPARC M10/M12 and SPARC Enterprise)"
On the following servers, configure the settings as described in "8.2.7 Configuring BIOS Settings of Managed Servers".
Blade Servers (only when not using VIOM)
Settings for rack mount (only when not using VIOM or ISM) and tower servers
PRIMEQUEST
When an OS has been installed on the managed server, configure the settings as described in "8.2.8 Configuring OS Settings of Managed Servers".
When VMware ESXi has been installed on the managed server, configure the settings as described in "8.2.10 Configuring ServerView Operations Manager (VMware ESXi)".
