Refer to the management controller (ILOM) manual to apply the settings chosen in "8.1.4 Setting Values for SPARC Enterprise (M3000/T5120/T5140/T5220/T5240/T5440) and SPARC M10-1/M10-4/M12-1/M12-2/M12-1/M12-2" to configure the following on the IPMI controller.
Admin IP address (IP address of the IPMI controller)
User name
Password
SNMP community name
SNMP trap destination
This must be the IP address of the admin server.
Refer to the instructions given in the ILOM manual and enable the following functions.
SNMP Agent
SSH Configuration
HTTPS Configuration
IPMI Status
Note
For SNMP settings in ILOM, enable SNMPv1 communication.
