Refer to the management blade manual to apply the settings chosen in "8.1.1 Settings for Blade Servers" to the management blade.
Note that the SNMP community must be set to Write (read and write) access.
Admin IP address (IP address of the management blade)
SNMP community name
SNMP trap destination
This must be the IP address of the admin server.
Refer to the management blade manual to set the following SNMP agent settings.
Set Agent SNMP Enable
Set to "enable".
Set Agent SNMP Security Enable
Set to "disable".
Note
When powering off a chassis together with its enclosed server blades, servers are shut down using the graceful shutdown option of the management blade. To enable this feature, all servers within the chassis should have ServerView Agents installed.
