After completing the design of the PRIMECLUSTER system and determining the configuration of the PRIMECLUSTER system to be built, install the PRIMECLUSTER system.
Since the work will be performed based on PRIMECLUSTER Designsheets that were created, check that all required items on PRIMECLUSTER Designsheets have been entered.
Information
PRIMECLUSTER Designsheets are stored in documents/designsheet in PRIMECLUSTER DVD.
Install the PRIMECLUSTER system by performing the following procedure in sequence from (1).
Perform the operations described in the dotted line sections if the system design matches the described conditions.
If you are installing applications after you install the PRIMECLUSTER system, go back to the operations from the Application environment setup to the Application installation.
The screens to be used differ according to the operation. The work procedures to be performed with GUI from Web-Based Admin View and the work procedures to be performed with CLI and CUI from console screens are shown in separate boxes.
Figure 1.2 Flow of PRIMECLUSTER system installation
The abbreviations in the flowchart for PRIMECLUSTER system installation are explained below.
CF: Cluster Foundation
RMS: Reliant Monitor Services
PAS: Parallel Application Services
WT: Wizard Tools
GDS: Global Disk Services
GFS: Global File Services
GLS: Global Link Services
For detailed information on each item, refer as necessary to the corresponding manual reference section mentioned in the table below.
Work items | Manual reference section | Required/Optional |
|---|---|---|
System design | Required | |
Software installation | ||
(1) PRIMECLUSTER installation | Required | |
(2) Related software Installation and setup | Optional | |
(3) Application installation and environment setup | Optional | |
Cluster configuration | ||
(4) User registration/client setup | Required | |
(5) Initial cluster setup | Required | |
Cluster application building | ||
(6) GLS setup | Initial GLS Setup | Optional (required to use GLS) |
(7) Web-Based Admin View setup when GLS is used | ||
(8) GDS setup | Initial GDS Setup | Optional (required to use GDS) |
(9) File system setup | Initial File System Settings | Optional (required to use GFS) |
(10) Resource setup | Setting Up Resources | Optional |
(11) Cluster application creation | online_offlineSetting Up Cluster Applications | Required |
Cluster configuration in Oracle VM Server for SPARC Environment | ||
(12) Cluster systems in Oracle VM Server for SPARC environment | Chapter 14 Using PRIMECLUSTER in Oracle VM Server for SPARC Environment | Optional |
Cluster configuration in Oracle Solaris Kernel Zones Environment | ||
(13) Cluster system in Oracle Solaris Kernel Zones environment | Chapter 15 Using PRIMECLUSTER in Oracle Solaris Kernel Zones Environment | Optional |
Cluster configuration in Oracle Solaris Zones Environment | ||
(14) Cluster systems in Oracle Solaris Zones environment | Chapter 16 Using PRIMECLUSTER in Oracle Solaris Zones Environment | Optional |
GLS: Global Link Services
GDS: Global Disk Services
