5.1 Initial Cluster Setup

This section describes the initial setup of the PRIMECLUSTER cluster.

For details on the setup methods, see the reference locations indicated in the table below.

	Contents	Manual reference location*1
1	Checking Console Configuration*2	For SPARC Enterprise M3000, M4000, M5000, M8000, or M9000: 5.1.2.2.1 Checking Console Configuration For SPARC Enterprise T1000, T2000: 5.1.2.4.1 Checking Console Configuration For SPARC Enterprise T5120, T5220, T5140, T5240, T5440, or SPARC T3, T4, T5, T7, S7 series: 5.1.2.3.1 Checking Console Configuration
2	5.1.1 Setting Up CF and CIP (setting up the cluster configuration information and the IP addresses)	CF "1.1 CF, CIP and CIM configuration"
3	5.1.2 Configuring the Shutdown Facility	CF "Chapter 7 Shutdown Facility"
4	5.1.3 Initial Setup of the Cluster Resource Management Facility	CF "3.3 Resource database configuration"

*1 The PRIMECLUSTER manual names are abbreviated as follows:

CF: PRIMECLUSTER Cluster Foundation (CF) Configuration and Administration Guide

*2 "1. Check console information" is the prerequisite of "3. Configure Shutdown Facility". Be aware that you need to check the console information before "2. Configure CF and CIP".