When changing the following files on the switchover source site, also change the files on the switchover destination site.
"*" in the table indicates arbitrary files in the folders.
The above changes are not necessary when no file exists in both the switchover source and destination sites.
| Folder | File Name |
|---|---|
| Installation_folder\SVROR\Manager\etc\conf\ | dhcp_server.yml |
| Installation_folder\SVROR\Manager\etc\customize_data\ | auto_replace.rcxprop |
| cli_notlist_oc.rcxprop | |
| get_cpu_enabled_cores.rcxprop | |
| gui_always_home.rcxprop | |
| gui_config.rcxprop | |
| gui_enable_reverse_proxy.rcxprop | |
| image_admin_hyperv.rcxprop | |
| image_admin_hyperv_User_Group_Name.rcxprop | |
| iscsi.rcxprop | |
| iscsi_User_Group_Name.rcxprop | |
| kb978336_scvmm.rcxprop | |
| l_server.rcxprop | |
| ldap_attr.rcxprop | |
| library_share_deny.conf | |
| library_share_User_Group_Name_deny.conf | |
| manager.rcxprop | |
| multiple_ds.rcxprop | |
| mwgui_config.rcxprop | |
| network_list.rcxprop | |
| network_map.rcxprop | |
| network_viewer.rcxprop | |
| nic_index_map.rcxprop | |
| os_setting.rcxprop | |
| os_setting_User_Group_Name.rcxprop | |
| physical_l_server_modify.rcxprop | |
| pool.rcxprop | |
| power_timeout.rcxprop | |
| product_report.rcxprop | |
| rcxmgrctl_except_rba.rcxprop | |
| scsicontroller.rcxprop | |
| scvmm_mac_pool.rcxprop | |
| scvmm_mac_pool_Tenant_Name.rcxprop | |
| scw_nf_retry_define.rcxprop | |
| server_control.rcxprop | |
| server_snmp.rcxprop | |
| server_spec.rcxprop | |
| show_vds_vc.rcxprop | |
| sparc_vm.rcxprop | |
| svom_info.rcxprop | |
| use_image_data_disk | |
| vdipool_group_entitlement.rcxprop | |
| vm.rcxprop | |
| vm_console.rcxprop | |
| vmguest_uuid_output.rcxprop | |
| zpool_and_zone_recovery.rcxprop | |
| Installation_folder\SVROR\Manager\etc\customize_data\alive_monitoring\ | vm_Hyper-V.rcxprop |
| vm_VMware.rcxprop | |
| Installation_folder\SVROR\Manager\etc\customize_data\home_tab\ | home_infra_mes.txt |
| home_tenant_mes.txt | |
| Installation_folder\SVROR\Manager\etc\customize_data\l_server\net\ | * |
| Installation_folder\SVROR\Manager\etc\customize_data\net\ | net_info.Network_Resource_Name.conf |
| net_info.L-Server_Name.conf | |
| Installation_folder\SVROR\Manager\etc\customize_data\setup_wizard\ | enable_advanced_mode.rcxprop |
| lplatform_console_setup_parameter_on | |
| Installation_folder\SVROR\Manager\etc\customize_data\sysprep_guirunonce\ | * |
| Installation_folder\SVROR\Manager\etc\customize_data\vm_prop | vm_*.rcxprop |
| Installation_folder\SVROR\Manager\etc\event_handler\ | * |
| Installation_folder\SVROR\Manager\etc\l_platform\ | enable_cloning |
| Installation_folder\SVROR\Manager\etc\l_server\ | disable_check_num_of_cpu |
| enable_cpu_per_socket | |
| Installation_folder\SVROR\Manager\etc\vm\ | delete_old_image |
| online_cloning | |
| require_image_location | |
| single_storage_vc | |
| thin_provisioning | |
| Installation_folder\SVROR\Manager\rails\config\rcx\ | vm_guest_params.rb |
| Installation_folder\SVROR\Manager\sys\irmctool | * |
| Installation_folder\SVROR\Manager\sys\usm\etc\ | emcpath.conf |
| fspath.conf |
| Directory | File Name |
|---|---|
| /etc/opt/FJSVrcvmr/conf/ | dhcp_server.yml |
| /etc/opt/FJSVrcvmr/customize_data/ | auto_replace.rcxprop |
| cli_notlist_oc.rcxprop | |
| get_cpu_enabled_cores.rcxprop | |
| gui_always_home.rcxprop | |
| gui_config.rcxprop | |
| gui_enable_reverse_proxy.rcxprop | |
| image_admin_hyperv.rcxprop | |
| image_admin_hyperv_User_Group_Name.rcxprop | |
| iscsi.rcxprop | |
| iscsi_User_Group_Name.rcxprop | |
| kb978336_scvmm.rcxprop | |
| l_server.rcxprop | |
| ldap_attr.rcxprop | |
| library_share_deny.conf | |
| library_share_User_Group_Name_deny.conf | |
| manager.rcxprop | |
| multiple_ds.rcxprop | |
| mwgui_config.rcxprop | |
| network_list.rcxprop | |
| network_map.rcxprop | |
| network_viewer.rcxprop | |
| nic_index_map.rcxprop | |
| os_setting.rcxprop | |
| os_setting_User_Group_Name.rcxprop | |
| physical_l_server_modify.rcxprop | |
| pool.rcxprop | |
| power_timeout.rcxprop | |
| product_report.rcxprop | |
| rcxmgrctl_except_rba.rcxprop | |
| scsicontroller.rcxprop | |
| scvmm_mac_pool.rcxprop | |
| scvmm_mac_pool_Tenant_Name.rcxprop | |
| scw_nf_retry_define.rcxprop | |
| server_control.rcxprop | |
| server_snmp.rcxprop | |
| server_spec.rcxprop | |
| show_vds_vc.rcxprop | |
| sparc_vm.rcxprop | |
| svom_info.rcxprop | |
| use_image_data_disk | |
| vdipool_group_entitlement.rcxprop | |
| vm.rcxprop | |
| vm_console.rcxprop | |
| zpool_and_zone_recovery.rcxprop | |
| /etc/opt/FJSVrcvmr/customize_data/alive_monitoring/ | vm_Hyper-V.rcxprop |
| vm_VMware.rcxprop | |
| /etc/opt/FJSVrcvmr/customize_data/home_tab/ | home_infra_mes.txt |
| home_tenant_mes.txt | |
| /etc/opt/FJSVrcvmr/customize_data/l_server/net/ | * |
| /etc/opt/FJSVrcvmr/customize_data/net/ | net_info.Network_Resource_Name.conf |
| net_info.L-Server_Name.conf | |
| /etc/opt/FJSVrcvmr/customize_data/setup_wizard/ | enable_advanced_mode.rcxprop |
| lplatform_console_setup_parameter_on | |
| /etc/opt/FJSVrcvmr/customize_data/sysprep_guirunonce/ | * |
| /etc/opt/FJSVrcvmr/customize_data/vm_prop/ | vm_*.rcxprop |
| /etc/opt/FJSVrcvmr/event_handler/ | * |
| /etc/opt/FJSVrcvmr/l_platform/ | enable_cloning |
| /etc/opt/FJSVrcvmr/l_server/ | disable_check_num_of_cpu |
| enable_control | |
| enable_cpu_per_socket | |
| /etc/opt/FJSVrcvmr/vm/ | delete_old_image |
| online_cloning | |
| require_image_location | |
| single_storage_vc | |
| thin_provisioning | |
| /opt/FJSVrcvmr/rails/config/rcx/ | vm_guest_params.rb |
| /opt/FJSVrcvmr/sys/irmctool | * |
| /opt/FJSVrcvmr/sys/usm/etc/ | emcpath.conf |
| fspath.conf |
Information
When the rcxmgrexport command is executed, the above configuration files are output to the following switchover information storage folder:
[Windows Manager]
Switchover information storage folder\ManagerExport\CONFIG_FILEDate Exported
[Linux Manager]
Switchover information storage directory/ManagerExport/CONFIG_FILEDate Exported
Referring to the configuration file for the switchover source site, which is stored in the switchover information storage folder, during switchover, enables you to make the content of the configuration file for the switchover destination site the same as the one for the switchover source site.
For details on the switchover information storage folder, refer to "3.2 Creating Switchover Information Storage Folders".
For details on the rcxmgrexport command, refer to "B.1 rcxmgrexport".
When the contents of configuration files shown below differ between sites at the switchover, matching them is not easy.
When editing configuration files on the switchover source site, manually merge the edited contents on the switchover destination site, before switchover. For details on how to edit configuration files, see the references listed below.
| Overview | File Name | Reference |
|---|---|---|
| Definition file for alive monitoring |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\alive_monitoring [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/alive_monitoring
vm_VMware.rcxprop vm_Hyper-V.rcxprop |
Refer to "8.1.8 Definition File for Alive Monitoring" in the "Setup Guide CE". |
| Editing information in the Home window of the ROR console |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\home_tab [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/home_tab
home_infra_mes.txt home_tenant_mes.txt |
Refer to "8.4 Editing Information in the Home Window" in the "Operation Guide CE". |
| When using driver-specific parameters such as GLS or Bonding for scripts for configuring networks |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\net [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/net
net_info.network resource name.conf net_info.l_server name.conf |
Refer to "7.8 Network Redundancy and VLAN Settings of L-Servers" in the "Setup Guide CE". |
|
[Hyper-V] Configuration file for access limitation in the image storage location |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data
library_share_deny.conf library_share_User_Group_Name_deny.conf |
Refer to "8.3.8 Collecting and Deleting Cloning Images" in the "Setup Guide CE". |
|
[Hyper-V] For specification of the VM guest administrator account when L-Servers are created by specifying an image |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data
image_admin_hyperv.rcxprop image_admin_hyperv.User_Group_Name.rcxprop |
Refer to "8.3.10 [OS] Tab Configuration" in the "Setup Guide CE". |
| When creating virtual L-Servers using VMware ESXi on other companies' servers |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data [Linux Manager] /etc/opt/FJSVrcvmr/customize_data
server_control.rcxprop |
Refer to "8.1.5 Definition Files when Creating a Virtual L-Server Using VMware ESXi on Another Vendor's Servers or when Creating Virtual L-Servers without Using ServerView ESXi CIM Provider on VMware ESXi on Fujitsu Rack Mount Servers" in the "Setup Guide CE". |
When modifying behaviors of server virtualization software
When configuring using console connections from public LANs |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data [Linux Manager] /etc/opt/FJSVrcvmr/customize_data
vm.rcxprop vm_console.rcxprop |
Refer to "8.2.1 Creating Definition Files" in the "Setup Guide CE". |
| When creating L-Servers connected with NICs using System Center 2012 Virtual Machine Manager or later |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data
scvmm_mac_pool.rcxprop scvmm_mac_pool_Tenant_Name.rcxprop |
Refer to "8.3.5 Manual Network Configuration" in the "Setup Guide CE". |
| When using distributed virtual switches |
[Windows Manager] Installation_folder\SVROR\Manager\etc\vm [Linux Manager] /etc/opt/FJSVrcvmr/vm
vds_vc |
Refer to "E.1.4 Network Preparations" in the "Design Guide CE". |
| iSCSI network definition file |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\ [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/
iscsi_User_Group_Name.rcxprop iscsi.rcxprop |
Refer to "7.1.10 Definition File for iSCSI Network" in the "Setup Guide CE". |
| Configuration for ordering display of resources on trees |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\ [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/
gui_config.rcxprop |
Refer to "2.3.1.3 Sorting the Resource List in the Tree" in the "Release Notes". |
| Definition file for ZFS storage pool information |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/
zpool_and_zone_recovery.rcxprop |
Refer to "18.5.1 ZFS Storage Pool Definition Files [Solaris] [Solaris Zones]" in the "User's Guide VE". |
| Definition file for the monitoring timeout value for physical server power operations |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data [Linux Manager] /etc/opt/FJSVrcvmr/customize_data
power_timeout.rcxprop |
Refer to "Appendix A Notes on Operating ServerView Resource Orchestrator" in the "Operation Guide CE". |
| Definition file for when creating a virtual L-Server using a server which cannot use ServerView Agents |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data [Linux Manager] /etc/opt/FJSVrcvmr/customize_data
server_spec.rcxprop |
Refer to "8.1.4 Definition Files when Creating a Virtual L-Server Using a Server which cannot Use ServerView Agents" in the "Setup Guide CE". |
| SCSI controller definition file |
[Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data [Linux Manager] /etc/opt/FJSVrcvmr/customize_data
scsicontroller.rcxprop |
Refer to "8.2.1 Creating Definition Files" in the "Setup Guide CE". |
If the following configuration files exist, contact Fujitsu technical staff.
[Windows Manager]
[Linux Manager]
