Follow the procedure below to install the client (CT) when installing the client (CT) on a device not connected to the same job network as the Management Server/Master Management Server and accessing the Management Server/Master Management Server via the Internet.
Standalone installation
The following two methods are available for a standalone installation:
Installation in wizard format
Silent installation
Copy the folder containing the client (CT) installer "win32\DTKClient" in the setup disk to any location on the client (CT).
Copy the file "dtkcustom_internet.ini" (located under the win32 folder in the setup disk) to the DTKClient folder copied in step 1.
Under the DTKClient folder, run "Setup.exe".
Refer to "2.6.1.1 Wizard-style Installation > Installation for details on the remaining steps. Enter the following information in the Enter the server information window in step 6.
IP address of the (Master) Management Server to connect to: Enter the IP address or server name of the Relay Server used when connecting over the Internet.
IP address of the Backup Management Server: Enter the IP address or computer name of the backup Relay Server that references the user policy when an error occurs on the Relay Server that is being connected to.
Used Port Number (for Receiving): No entry required.
Used Port Number (for Sending): Enter the port number used for communication from the client (CT) to the Relay Server when sending log or receiving policies of the client (CT).
Used Port Number (for Sending 2): Enter the port number used for communication from the client (CT) to the Relay Server when registering the client (CT).
Other items are the same as described in "Installation".
Silent installation
Refer to "2.6.1.2 Perform Silent Installation" for details.
Enter information as follows in step 3.
Setting item | Description | |
|---|---|---|
Server IP address or server name (CT Management Server) | Enter the IP address or server name of the Relay Server used when connecting over the Internet. | |
Server IP address or server name (backup Management Server) | Enter the IP address or computer name of the backup Relay Server that references the user policy when an error occurs on the Relay Server that is being connected to. | |
Set port number | Used Port Number (for Receiving) | No entry required. |
Used Port Number (for Sending) | Enter the port number used for communication from the client (CT) to the Relay Server when sending log or receiving policies of the client (CT). | |
Used Port Number (for Sending 2) | Enter the port number used for communication from the client (CT) to the Relay Server when registering the client (CT). | |
The other items are the same as described in "2.6.1.2 Perform Silent Installation".
Copy the folder containing the client (CT) installer "win32\DTKClient" in the setup disk to any location on the client (CT).
Copy the file "dtkcustom_internet.ini" (located under the win32 folder in the setup disk) to the DTKClient folder copied in step 1.
In Windows, click Start > Run or start the command prompt.
Under the DTKClient folder, run "Setup.exe".
The remaining steps are the same as described in "2.6.1.2 Perform Silent Installation".
Installation using a Master PC/Virtual Master PC
Refer to "2.6.2 Installation Using Master PC/Virtual Master PC" for details.
However, refer to "Standalone installation" > "Installation in wizard format" or "Silent installation" for details on the installation method in step 2.
Installation using Systemwalker Desktop Patrol
Refer to "2.6.3 Installation Using Systemwalker Desktop Patrol" for details. Note however that the extra step below must be executed after step 5 and before step 6.
Copy the file "dtkcustom_internet.ini" (located under the win32 folder in the setup disk) to the DTKClient folder copied in step 4.
Installation using Active Directory Group Policy
Refer to "2.6.4 Installation using Active Directory Group Policy" for details. Note however that the extra steps below must be executed after step 8 and before step 9 in "If the domain controller runs Windows Server(R) 2008, Windows Server(R) 2012 or Windows Server(R) 2016" in2.6.4.3 Register the Group Policy".
Copy the file "dtkcustom_internet.ini" (located under the win32 folder in the setup disk) to the DTKClient folder copied in step 8.
