The name used to identify a physical OS or VM host is displayed.
The IP address on the admin LAN is displayed.
VM guests are shown using hyphens ("-").
The status of the physical OS, VM host, or VM guest is displayed.
The type of the OS running on the server is displayed.
One of the following is displayed:
Physical OS
VM Host
VM guests
The type of the OS running on the server is displayed.
The name of the server on which the physical OS, VM host, or VM guest is operating is displayed.
VM guests are shown using hyphens ("-").
The link to the allocated L-Server information.
See
Refer to "11.2 Resource Status" in the "Operation Guide CE" for details on resource statuses.
The following information is displayed only for VM Hosts.
The type of the VM is displayed.
The name of the VM software used is displayed.
The version and level of the VM software used is displayed.
The number of VM guests is displayed.
The link to the web interface of server virtualization software is displayed.
The information regarding the save status of the OVM configuration information in the XML file is displayed.
For details on saving OVM configuration information in XML files, refer to "18.2 Settings for Server Switchover" in the "User's Guide VE".
Value | Description | |
|---|---|---|
OVM Configuration Information's XML Save Status | - | The XML file is not saved This is displayed when the XML file has never been saved or the XML file save process has never succeeded. |
Success (Last success time: 2013-08-27 11:36:47) | The XML file was successfully saved The time and date when the XML file was saved.
| |
Failure (Last success time:2013-05-16 02:50:30) | The XML file save process that was last performed failed The time and date when the save process was succeeded last time is output. |
A list of hosted VM guests is displayed.
A list of the VM guests with the selected VM host set as their VM Home Position is displayed.
The following information is displayed only for VM guests.
The type of the VM is displayed.
The name of the VM host on which the VM guest is stored is displayed.
The name of the VM is displayed.
The link to the web interface of server virtualization software is displayed.
The following information is not displayed for VM guests.
The link to the web interface of server management software is displayed.
Displayed only for the following servers:
PRIMERGY Series
PRIMEQUEST
Fujitsu M10/SPARC Enterprise
IP address of the remote management controller is displayed.
Displayed only for servers other than PRIMERGY BX servers.
The following information is not displayed for VM guests or Fujitsu M10/SPARC Enterprise.
The latest version of the system image is displayed.
The date and time of the most recent system image backup is displayed.
Comments describing the system image are displayed.
The following information is not displayed for VM guests.
Displays the name of the physical server that will be replaced when server switchover occurs.
Displays the name of the physical server that is currently running.
The method used to perform server switchover is displayed.
The boot type of the system disk is displayed.
Shows whether automatic server recovery is enabled or not.
Shows whether network settings will be automatically adjusted during server switchover.
The setting whether the spare server is turned off forcibly when switching over to the spare server is displayed.
The setting whether the server is switched to a VM host on which a VM guest exists is displayed.
Displays the name of the physical server that will replace the current active server when server switchover occurs.
The following information is not displayed for VM guests or Fujitsu M10/SPARC Enterprise.
The WWNN set on the HBA is displayed.
The first WWPN set on the HBA is displayed.
The WWPN should be set to the I/O address of each HBA (in descending order).
Therefore, for rack mount or tower servers, the order may not correspond with port number order described for the HBA.
The second WWPN set on the HBA is displayed.
The WWPN should be set to the I/O address of each HBA (in descending order).
Therefore, for rack mount or tower servers, the order may not correspond with port number order described for the HBA.
The following information is not displayed for VM guests.
The mounted position (index) of each network interface on the server is displayed.
However, when a PRIMERGY RX/TX series server is selected, the index is displayed as "1" for the admin LAN and "2" for the redundant LAN.
When "5.5.3 Registering the Public LAN (MAC Address) Information" is performed, "3" or a higher number is displayed as the index for the public LAN.
The port VLAN IDs set on the LAN switch blade or the network device to be connected are displayed.
When connected to a PRIMERGY BX900/BX400 LAN switch blade operating in IBP mode, "(IBP)" is displayed.
When connected to a PRIMERGY BX900/BX400 LAN switch blade operating in Converged Fabric mode, "(Converged Fabric)" is displayed.
The tagged VLAN IDs set on the LAN switch blade or the network device to be connected are displayed.
When connected to a PRIMERGY BX900/BX400 LAN switch blade operating in IBP mode, "(IBP)" is displayed.
When connected to a PRIMERGY BX900/BX400 LAN switch blade operating in Converged Fabric mode, "(Converged Fabric)" is displayed.
The mounted position (index) of each network interface on the server is displayed.
The names of the port groups set on the LAN switch ports connected to each network interface (for LAN switch blades operating in IBP mode) are displayed.
Only "-" is displayed under the following conditions.
The corresponding LAN switch blade is not registered
The corresponding LAN switch blade is not operating in IBP mode
The port of the corresponding LAN switch blade has not been assigned to a port group
The time-out value (in seconds) for ping monitoring is displayed.
The recovery performed when an error is detected is displayed.
The number of times reboot is performed during recovery is displayed.
The following information is not displayed for VM guests or servers other than Fujitsu M10/SPARC Enterprise.
The WWPN value of the port n is displayed.
Values set by users are reflected on WWPN.
The WWPN for the CA connected to the port n is displayed.
The AffinityGroup for the CA connected to the port n is displayed.
The following information is displayed when the VM host is a target of network auto configuration and only when automatic network configuration has been performed.
The network resource name for which automatic network configuration is performed is displayed.
The VLAN ID configured for the network resource is displayed.
The subnet address configured for the network resource is displayed.
When it is not configured, "-" is displayed.
The subnet mask configured for the network resource is displayed.
When it is not configured, "-" is displayed.
