By registering updater, updater can be applied in DS and CT automatically.
The information for version upgrade in V15.1.0 is as follows:
DS information
Input Item | Configuration Value |
|---|---|
Name (cannot be modified) | V15.1.0-R1.1-SN1501 |
Version | 1 |
Descriptions | DS updater V15.1.0-R1.1-SN1501 |
CT information
Input Item | Configuration Value |
|---|---|
Name (cannot be modified) | V15.1.0-R1.1-SN1551 |
Version | 1 |
Descriptions | CT updater V15.1.0-R1.1-SN1551 |
Note
Updated notes
Execute the command in the status that Desktop Patrol service (IBudgetMGR (INV)) has been started.
When DS updater only is saved to the updated saving target folder, register only DS updater. Same as the case of CT updater.
Updater with the same version as the registered updater cannot be registered. However, in case DS updater has been registered while CT updater has not, register only CT updater. In case CT updater has been registered but DS updater has not, register only DS updater.
CT updater cannot be applied by using policy group. It is applied to all the CTs affiliated to the distribution server.
CT updater cannot be applied manually through the software download window. It will all be applied automatically.
If V15.0.1 or earlier version is used, connections from V15.0.1 or earlier DS and CT must be authorized using CustomPolicy.exe (modifying policy for custom setup command) before applying the updater.
Once the updater is applied, reject connections from the V15.0.1 or earlier DS and CT.
Refer to the Systemwalker Desktop Patrol Reference Manual for details on CustomPolicy.exe (modifying policy for custom setup command).
The procedure for version upgrade by applying updater is as follows. Apply/Distribution updater according to this procedure for version upgrade.
Register updater in CS.
If using V13.2.0/V13.2.1
Log on to Windows using an account that belongs to the Administrators group.
If you are using other applications, close them.
Copy dvdRom\utilites\tool\updv132 to a directory on the CS.
\ITBudgetMGRclientUpdate.zip - CT updater
Example:
c:\temp\updv132\ITBudgetMGRclientUpdate.zip
Start the command prompt and register the CT updater.
Execute updaterregist.exe (registering and updating). Refer to "Command Reference" in the Systemwalker Desktop Patrol Reference Manual for details.
dtpInstallDir\FJSVsbtrs\bin\updaterregist.exe -dir updaterDir
updaterDir: Directory in which the CT updater was stored in the step 2 above.
Example:
> "C:\Program Files\Fujitsu\Systemwalker Desktop Patrol\FJSVsbrs\bin\updaterregist.exe" -dir c:\temp\updv132
Point
If you are using V13.2.0/V13.2.1, then after completing the above steps, do the same for "If using V14.2.0 or later" as well.
If using V14.2.0 or later
Log on to Windows using an account that belongs to the Administrators group.
If you are using other applications, close them.
Copy <DVD-ROM>\utilities\updater to any folder on CS.
\ITBudgetMGRserverUpdate.zip: DS updater
\ITBudgetMGRclientUpdate.zip: CT updater
(Example)
c:\temp\updater\DS\ITBudgetMGRserverUpdate.zip
\CT\ITBudgetMGRclientUpdate.zip3. Start the command prompt to register DS updater.
Execute updater registration command (updaterregist.exe) as follows. For the detailed method for using the command, refer to "Command Reference" in the Systemwalker Desktop Patrol Reference Manual.
<DTP Installation Target>\FJSVsbtrs\bin\updaterregist.exe -dir <Updater saving folder>
Updater saving folder: specify the folder for saving DS updater in Procedure 2.
(Example)
> "C:\Program Files\Fujitsu\Systemwalker Desktop Patrol\FJSVsbrs\bin\updaterregist.exe" -dir c:\temp\updater\DS
4. Then register CT updater.
<DTP Installation Target>\FJSVsbtrs\bin\updaterregist.exe -dir <Updater saving folder>
Updater saving folder: specify the folder for saving DS updater in Procedure 2.
(Example)
> "C:\Program Files\Fujitsu\Systemwalker Desktop Patrol\FJSVsbrs\bin\updaterregist.exe" -dir c:\temp\updater\CT
5. Confirm the application status.
The updater application status can be confirmed in the Distribution > Software Auditing window of the main menu.
DS updater application can be confirmed through Distribution Preparation Status after selecting the distribution DS updater in the Software Distribution > Set Software Distribution Target window of the main menu. "Table 4.1 Distribution preparation status message of DS updater" will be displayed in Distribution Preparation Status.
Message | Descriptions | Processing |
|---|---|---|
NO ERROR (Executing delivery) | DS updater distributing | Distributing DS updater. |
NO ERROR (Completed delivery) | DS updater distribution completed | DS updater distribution has been completed. |
NO ERROR (Completed apply) | DS updater application completed | DS updater application has been completed. |
Failed to download software | DS updater download failed | Confirm the following content. |
Failed to update modules | DS updater application failed | Confirm the following content. |
Information
Application timing for the registered updater
DS application timing
Start to apply according to the timing of Communication Interval with Upstream CS/DS of the select object DS window in Environment Setup > CS/DS settings and operation status of the main menu. The time required for application is from updater registration to the maximum Communication Interval with Upstream CS/DS (minute).
After rebooting PC before receiving updater, the timing for Communication Interval with Upstream CS/DS will be modified. The time up to application required is from PC reboot to the maximum Communication Interval with Upstream CS/DS (minute).
Application timing oriented to CT
Start to apply according to the timing for receiving policy. Since policy receiving is performed in Confirm Policy Interval, the time required for application is from updater registration to the maximum Confirm Policy Interval (minute).
Besides, after rebooting PC before receiving policy, the timing for receiving policy will be modified, the time up to application required is from PC reboot to the maximum Confirm Policy Interval (minute).