The following explains how to change the IP address and host name of the Systemwalker Operation Manager client. Also, it explains the items you must change.
Procedure
Use the following procedure to change the IP address and/or host name in the system environment where Systemwalker Operation Manager has been installed.
If you have changed the IP address and/or host name of a Systemwalker Operation Manager client, check the items you must change on the server and clients by referring to "Items You Must Change" given below.
Shut down the Systemwalker Operation Manager client. Also, shut down Systemwalker Operation Manager on the server where you need to shut down Systemwalker Operation Manager.
Change the IP address and/or host name of the Systemwalker Operation Manager client.
Change the items on the Systemwalker Operation Manager server or client.
Restart the server where you have shut down Systemwalker Operation Manager. Also, restart the Systemwalker Operation Manager client.
Items You Must Change
When changing the IP address and/or host name of the Systemwalker Operation Manager client, you must change the following item.
Definition of Task Link
If you have installed the Task Link function, you must change the following items.
Defining the Host Information
Parameters of Client Task Linkage command
Defining the Host Information
If you turn the client power on using the Task Link function, you must change the IP address and/or host name of the changed Systemwalker Operation Manager client on the server to be used for client power control.
Specify the IP address and/or host name of the changed Systemwalker Operation Manager client in the "hostinfo.ini" host information definition file.
For details, see "2.11.3 Defining the Host Information".
Parameters of Client Task Linkage command
If you have stored the Client Task Linkage command as a job, you must change the parameter of this command to the IP address and/or host name of the Systemwalker Operation Manager client to be changed.
To do so, check the job definition on the Systemwalker Operation Manager server (the schedule server) where you have defined the Client Task Linkage command as a job, and set the IP address and/or host name you have changed.
You NEED NOT restart the server to make your changes valid. However, you must set them only when no job is executed.
For details of Client Task Link command, refer to the Systemwalker Operation Manager Reference Guide.
