PRIMEQUEST System Disk Mirror for Windows User's Guide V1.0

B.1.1 Driver Error Messages (20XXX)

 

---

 

20000
Mirror driver was not able to start because of load error.

error reason : reason

 

[Explanation]

An error occurred at driver load and startup failed.

[Resolution]

Collect information for troubleshooting and contact your local customer support.

 

---

 

20001
Mirror driver was not able to start because of initializing process failure.

error reason : reason

 

[Explanation]

An error occurred at driver initialization and startup failed.

[Resolution]

Collect information for troubleshooting and contact your local customer support.

 

---

 

20002
Mirror driver was not able to start because of add device process failure.

error reason : reason

 

[Explanation]

An error occurred in the driver device adding process and startup failed.

[Resolution]

Collect information for troubleshooting and contact your local customer support.

 

---

 

20003
Mirror driver was not able to start because of registry accessing error.

 

[Explanation]

An error occurred in the driver registry access process and startup failed.

[Resolution]

Collect information for troubleshooting and contact your local customer support.

 

---

 

20004
Mirror driver was not able to start because of broken reserved data.

 

[Explanation]

Data on the reserved partition is invalid and startup failed.

[Resolution]

Collect information for troubleshooting and contact your local customer support.

 

---

 

20400
The error occurred on all disks in the mirror group.

group name : group
device names : devices
disk names : disks

 

[Explanation]

All disks in the mirror group group failed.
devices are the disk numbers of the disks in group.
disks are the disk names of the disks in group.

[Resolution]

The possible causes of an error that occurs in a disk may not only be a disk failure but also a failure or defect of a hardware component such as an adapter, a cable, and a controller. Check the event log and other relevant information to pinpoint the faulty part on the hardware.

With the boot disk, replace the failed disk or component with another and then restore the backup data. For more information on restore, see "Restoring the Boot Disk."

With a data disk, unset the mirroring configuration of group and then replace the failed disk or component with another, set the mirroring configuration again, and restore the backup data. For more information on restore, see "Data Disk Backup and Restore."