| ETERNUS SF Storage Cruiser User's Guide 13.2 - Solaris (TM) Operating System / Linux / Microsoft(R) Windows(R) - |
|
Contents
Index
|
Manager manages devices, using the LAN I/Fs of a device subject to management.
Connect the LAN for management to all devices subject to management.
In this case, transactions affected by management can be minimized by separating the LAN for management from that for transaction.
When a firewall is placed between Manager and a device subject to management, set the following port numbers to be able to pass the firewall.
|
Transmission destination |
Port/protocol |
Transmission start direction |
Function |
|---|---|---|---|
|
Manager |
23456/tcp |
Client -> manager |
GUI display/operation |
|
Device subject to management |
Depends on the device subject to management |
Depends on the device subject to management |
Calling Management Software |
|
Transmission destination device |
Port/protocol |
Transmission start direction |
Function |
|---|---|---|---|
|
Server node (Agent) |
4917/tcp |
Manager -> device |
Configuration management, polling monitoring, fault monitoring |
|
162/udp |
Device -> Manager |
Fault management |
|
|
Fibre Channel switch |
161/udp |
Manager -> device |
Configuration management, performance management, Polling monitoring |
|
23/tcp |
Manager -> device |
Configuration management |
|
|
162/udp |
Device -> Manager |
Fault management |
|
|
Virtualization switch device |
5988/tcp |
Manager -> Brocade SMI Agent |
Configuration management |
|
7420/tcp 7420/udp |
Device -> Manager |
Configuration management |
|
|
162/udp |
Device -> Manager |
Fault monitoring |
|
|
ping/icmp |
Manager -> device |
Polling monitoring |
|
|
Disk array unit ETERNUS2000 |
161/udp |
Manager -> device |
Configuration management, performance management, polling monitoring |
|
1999/tcp |
Manager -> device |
Configuration management |
|
|
162/udp |
Device -> Manager |
Fault management |
|
|
Disk array unit |
161/udp |
Manager -> device |
Configuration management, polling monitoring |
|
80/tcp |
Manager -> device |
Configuration management |
|
|
1999/tcp |
Manager -> device |
Configuration management |
|
|
162/udp |
Device -> Manager |
Fault management |
|
|
Hitachi SANRISE1000/2000 |
161/udp |
Manager -> device |
Configuration management |
|
162/udp |
Device -> Manager |
Fault management |
|
|
ping/icmp |
Manager -> device |
Polling monitoring |
|
|
EMC Symmetrix 3000/5000/ESP/8000 |
161/udp |
Manager -> device |
Configuration management |
|
162/udp |
Device -> Manager |
Fault management |
|
|
ping/icmp |
Manager -> device |
Polling monitoring |
|
|
Tape library unit |
161/udp |
Manager -> device |
Configuration management |
|
162/udp |
Device -> Manager |
Fault management |
|
|
ping/icmp |
Manager -> device |
Polling monitoring |
|
|
Bridge unit |
161/udp |
Manager -> device |
Configuration management |
|
23/tcp |
Manager -> device |
Configuration management |
|
|
ping/icmp |
Manager -> device |
Polling monitoring |
|
|
Network disk array NR1000 |
162/udp |
Device -> Manager |
Fault management |
|
161/udp |
Manager -> device |
Polling monitoring |
|
|
Manual embedding, and others |
162/udp |
Device -> Manager |
Fault management |
|
ping/icmp |
Manager -> device |
Polling monitoring |
The manager and managed devices use the following SNMP community.
|
Transmission destination device |
Default (*) |
Access |
Method of settings |
|---|---|---|---|
|
Fibre channel switch |
public |
read |
Refer to 4.2.1.1 Setting"for detailed settings. |
|
private |
read/write |
||
|
SN200 MDS(Cisco MDS) Fibre channel switch |
public |
read |
Refer to 4.2.4.1 Settings"for detailed settings. |
|
McDATA Fibre channel switch |
public |
read |
Refer to 4.2.5.1 Settings"for detailed settings. |
|
Disk array devices ETERNUS8000 |
public |
read |
Refer to 4.3.1.1 Setting"for detailed settings. |
*: The changes listed are performed on the "SNMP_COMMUNITY_NAME_FOR_IP" parameter in the sanma.conf file.Refer to "Appendix D Customization" for details.
|
Contents
Index
|