REMCS Agent Operator's Guide 1.5
Contents Index PreviousNext

UpChapter 2 Use of the Services
Up2.6 Error message list

2.6.5 Message when REMCS environment via XSCF is set

This section explains the messages and solutions for it displayed during setting up of the REMCS environment via XSCF from the REMCS Agent window of Machine Administration.

Message

IP Address is not set to XSCF.

Or

Subnet Mask is not set to XSCF.

Or

Gateway Address is not set to XSCF.

Or

Host Name is not set to XSCF.

Explanation

A setting error is assumed.

Response

1) Check the setting of XSCF. For details, refer to "Machine Administration guide".


Message

Failed to connect SMTP Server1.

Or

Failed to connect SMTP Server2.

Explanation

A setting error or communication error (e-mail or HTTP communication problem) is assumed.

Response

1) Check the setting of SMTP Server1 or SMTP Server2.

2) Check the setting of XSCF. For details, refer to "Machine Administration guide".


Message

Failed to connect POP Server for SMTP Server1.

Or

Failed to connect POP Server for SMTP Server2.

Explanation

A setting error or communication error (e-mail or HTTP communication problem) is assumed.

Response

1) Check the setting of POP Server for SMTP Server1 or POP Server for SMTP Server2.

2) heck the setting of XSCF. For details, refer to "Machine Administration guide".


Message

UserID for SMTP Server1 was not authenticated by POP Server.

Or

UserID for SMTP Server1 was not authenticated by POP Server.

Explanation

A setting error or communication error (e-mail or HTTP communication problem) is assumed.

Response

1) Check the setting of POP Server for SMTP Server1 or POP Server for SMTP Server2.

2) Check the setting of XSCF. For details, refer to "Machine Administration guide".


Contents Index PreviousNext

All Rights Reserved, Copyright(C) FUJITSU LIMITED, PFU LIMITED 2001-2003