REMCS Agent Operator's Guide 1.5
Contents Index PreviousNext

UpChapter 2 Use of the Services
Up2.6 Error message list

2.6.3 Message when REMCS environment is set

This section explains the messages and solutions for it displayed during setting up of the REMCS environment from the REMCS Agent window of Machine Administration.

Message

The REMCS Environment data could not be read.

Or

Failed Reading REMCS Enviroment Data.

Explanation

The REMCS environment file (rimomen.dft) probably does not exist.

Response

1) Check the remaining capacity of the disk under a /opt directory.

2) If the remaining capacity of the disk is enough, back up the environmental definition file.

Re-install the REMCS agent, and restore the environmental definition.

3) Perform online registration again.

4) If the message is displayed again, please contact with your local support.


Message

The REMCS Environment could not be updated.

Or

Failed Updating REMCS Environment Data.

Explanation

The REMCS environment file could not be updated.

The free disk space is insufficient, or the REMCS environment file (rimomen.dft) does not exist.

Response

1) Check the remaining capacity of the disk under a /opt directory.

2) If the remaining capacity of the disk is enough, back up the environmental definition file.

Re-install the REMCS agent, and restore the environmental definition.

3) Perform online registration again.

4) If the message is displayed again, please contact with your local support.


Message

The REMCS Environment file could not be read.

Or

REMCS Environment file could not be read.

Or

Failed Reading REMCS Environment Data.

Explanation

The REMCS environment settings file (remote.conf) probably does not exist.

Response

1) Check the remaining capacity of the disk under a /opt directory.

2) If the remaining capacity of the disk is enough, back up the environmental definition file.

Re-install the REMCS agent, and restore the environmental definition.

3) Perform online registration again.

4) If the message is displayed again, please contact with your local support.


Message

The REMCS Environment file could not be written.

Or

Failed Writing REMCS Environment Data.

Explanation

The REMCS environment file could not be updated.

The free disk space is insufficient, or the REMCS environment settings file (remote.conf) does not exist.

Response

1) Check the remaining capacity of the disk under a /opt directory.

2) If the remaining capacity of the disk is enough, back up the environmental definition file.

Re-install the REMCS agent, and restore the environmental definition.

3) Perform online registration again.

4) If the message is displayed again, please contact with your local support.


Message

The environment data could not be read. ("return code ")

Explanation

The environment date may be broken.

Response

1) Check a return code. For details, refer to "2.6.4 Error return code list." When you can not find out return code on the code list, please contact with your local support.


Message

The environment data are not for Management Server.

The environment data could not be read.

Explanation

Stored environment data may be broken, or, connection type in the environment data is not "Management Server Connection".

Response

1) Make sure the connection type of the other system, from which the environment data were transferred, is Management Server Connection.

2) Save the environment data and transfer them again. Read them at the environment setting.



Contents Index PreviousNext

All Rights Reserved, Copyright(C) FUJITSU LIMITED, PFU LIMITED 2001-2003