2.5.8 Monitoring Settings

Setting Procedure

The procedure for setting the E-mail server is described below.

In CSG Web GUI, click [] on the global pane.
The Settings dialog box is displayed.
Click Monitoring > Mail server on the left pane.
The Mail server screen is displayed on the right pane.
Enter the required information, and then click Apply.

Input Items

Item	Required?	Description
SMTP server	Required	Specify the address of the SMTP server. Specify up to 64 characters in either IPv4 format or FQDN format for the address of the SMTP server.
Sender mail address	Required	Specify the E-mail address for the person sending the E-mail.
SMTP port	Optional	Specify the port number for the SMTP server. If omitted, the setting defaults to 25.
Authentication method	Required	Specify the authentication method to be used when connecting to the SMTP server. none Connects to the SMTP server without using authentication. cram-md5 The device uses cram-md5 for the authentication method. plain The device uses plain for the authentication method. login The device uses login for the authentication method.
User name	Required	When the authentication method is specified as something other than none, specify the user name for connecting to the SMTP server.
Password	Required	When the authentication method is specified as something other than none, specify the password for the user for connecting to the SMTP server.

See

You can also configure the Mail Server with the CSG REST API. Refer to "Mail Server" in the "Reference Guide" for how to configure this.

Setting Procedure

The procedure for setting E-mail notifications is described below.

In CSG Web GUI, click [] on the global pane.
The Settings dialog box is displayed.
Click Monitoring > Mail notification on the left pane.
The Mail notification screen is displayed on the right pane.
Enter the required information, and then click Apply.

Input Items

Item	Required?	Description
Mail address 1	Optional	Enter an E-mail address for sending event notifications.
Mail address 2	Optional	Same as above
Mail address 3	Optional	Same as above

Content of Notifications

The content of notifications sent by E-mail is described below.
If the same event occurs successively within 20 seconds, additional notification is not sent.

Event E-mail

Item	Content
Subject	Cloud Storage Gateway Event Mail
From	The sender's E-mail address that was specified in "2.5.8.1 E-mail Server Settings".
To	The notification E-mail addresses that were specified in "2.5.8.2 E-mail Notification Settings". If there are multiple notification E-mail addresses, notification is sent simultaneously to all registered E-mail addresses.
Text	Severity: <Event log level (Warning or Error)> Date: <Date and time the event occurred> Appliance Address: <IP address of the virtual machine in which this product is running> Target Name: <Cloud provider name/bucket name or "System"> Message ID: <Message ID> Message: <Message>

See

Refer to the "Reference Guide" for details about "Messages".

Test E-mail

Item	Content
Subject	Cloud Storage Gateway Test Mail
From	The sender's E-mail address that was specified in "2.5.8.1 E-mail Server Settings".
To	The notification E-mail addresses that were specified in "2.5.8.2 E-mail Notification Settings". If there are multiple notification E-mail addresses, notification is sent simultaneously to all registered E-mail addresses.
Text	Severity: Information Date: <Date and time when the E-mail was sent> Appliance Address: <IP address of the virtual machine in which this product is running> Target Name: - Message ID: - Message: TEST MAIL

See

You can set the email notification destination with the CSG REST API. Refer to "Mail Notification" in the "Reference Guide" for how to configure this.

2.5.8 Monitoring Settings

2.5.8.1 E-mail Server Settings

2.5.8.2 E-mail Notification Settings