For multi-network configurations, set up the first network with the Configuration Wizard. The second and subsequent networks are configured with the CSG REST API by using the first network.
For information about the Configuration Wizard, refer to "2.3 Setting Up Virtual Appliances".
Refer to "Network" in the "Reference Guide" for instructions on setting up the CSG REST API.
Network Information
You can browse information about the network that you set up.
You can also browse information about the first network. The network ID of the first network is "0" and the Network Name "NET#00".
Registering Your Network
Set the IP address of the network where you assigned the virtual appliance.
Note
If your network registration fails, your registration information may remain. Browse the network information to see which network registrations failed. Then, after you have deleted the network, you must register the network again.
Changing the Network
Change the settings for the network that you added.
You can only change the network name for the first network.
Note
If you are using CSG Web GUI/CSG REST API, NAS access, and cloud forwarding, communication errors will occur. Stop use of the CSG Web GUI/CSG REST API and NAS access in advance. Simply changing the network name will not cause an error.
If the network cannot communicate with the DHCP server, changing from a fixed IP to DHCP fails. When communication with the DHCP server is available, perform the switch to the DHCP server again.
Deleting a Network
Delete a network that you added.
You cannot delete the first network.
Note
The network that you are using to communicate with the cloud provider cannot be deleted by default.
