For blade servers, also define the following information to be configured on LAN switch blades. For a LAN switch blade PY CB 10Gb FEX Nexus B22, no admin IP address is required, thus the following information is not necessary:
VLAN IDs for the admin LAN ports used to communicate with the admin server
IP addresses used by managed network devices for management purposes
Choose an IP address to be used for communication with the admin server.
When using a LAN switch blade which operates in Converged Fabric mode, set an admin IP address that belongs to a different subnet from the one that the representative virtual IP address of the fabric and the representative virtual IP address of the domain belong to.
SNMP community name
Define the name of the SNMP community to be used when collecting MIB information from the LAN switch blade.
This user name can contain up to 32 alphanumeric characters (upper or lower case), underscores ("_"), and hyphens ("-").
Administrator information (user name and password)
Login User Name
Define the login user name to be used for direct login to the LAN switch blade.
This user name can contain up to 64 alphanumeric characters (upper or lower case), underscores ("_"), and hyphens ("-").
Password
Define the password of the login user name to be used for direct login to the LAN switch blade.
This password can contain up to 80 alphanumeric characters (upper or lower case) and symbols (ASCII characters 0x20, 0x21, and 0x23 to 0x7e) with the exception of double quotation marks ( " ).
Administrator Password
Define the login password for the administrator to be used for directly logging into the LAN switch blade as an administrator.
This password can contain up to 80 alphanumeric characters (upper or lower case) and symbols (ASCII characters 0x20, 0x21, and 0x23 to 0x7e) with the exception of double quotation marks ( " ).
SNMP trap destination
This must be the admin IP address of the admin server.
