Define the following information to be configured on storage units.
Device name
IP address used by managed storage for management purposes
Choose an IP address to be used for communication with the admin server.
IP address of iSCSI target
Define the IP address of the storage unit with which the iSCSI initiator will communicate.
This is not necessary for storage units for which iSCSI is not enabled.
Note
IP addresses chosen for iSCSI should be static and do not used DHCP.
When using a multi-path configuration, separate the networks using different ports.
When a physical L-Server uses the iSCSI storage, ensure that all of the IP addresses configured here are on the same subnet.
