Define the following information to be configured on the servers to be managed.
Device name
IP addresses used by managed servers for management purposes
Choose an IP address to be used for communication with the admin server.
IP Address of iSCSI Initiator
Choose an IP address for the network interface to use for communication with managed servers.
This is not necessary for servers for which iSCSI is not enabled.
Note
IP addresses chosen for iSCSI should be static and do not used DHCP.
When using a multi-path configuration using iSCSI, separate the networks using different ports.
Interface segments and virtual switches also need to be separated.
When a physical L-Server uses the iSCSI storage, ensure that all of the IP addresses configured here are on the same subnet.
