Users who belong to the Web-Based Admin View administrator group
Note
After all of the operation management views are exited, use the environment settings menu.
The system environment is available only when the environment settings are activated in the primary management server.
Notices on system environment settings
The following explain setting items and conditions where they are required:
Item | Default value | Usage | |
|---|---|---|---|
Display setting | Look & Feel | Metal | Use this item to change the Look & Feel displayed on the screen. |
Client detailed trace log | No | The trace log should be set up when the specific client information is required for maintenance and troubleshooting. | |
Inactivity timeout | Inactivity timeout | No | This blocks improper operations by the unauthorized users by locking Web-Based Admin View. This function's validation varies depending on each operation management product. |
Inactivity timeout interval | 10 minutes | ||
Primary management server | Default set at installation | To change the IP address of the primary management server. | |
Secondary management server | Default set at installation | To change the IP address of the secondary management server | |
Secondary management server automatic migration | No | Execute "7.4 Secondary management server automatic migration" setting. | |
Client - management server connection time | 10 seconds | Specify the time interval of the client to monitor the management server. The client checks the state of the management server periodically at the specified time interval. If it takes time to connect to the client because of a network failure, enter a larger value. Then the disconnection might be avoided. | |
Automatic connection to management server | No | It indicates whether or not the client be connected automatically to an active management server. The displayed value cannot be modified on the GUI screen. Note that this parameter is invalid in this version. | |
Management server - monitoring node connection time | 10 seconds | It specifies the time interval of the management server surveillance for the monitoring node. The management server monitors requests from a monitoring node at regular intervals. If it takes time to connect to the client because of a network failure, enter a larger value. Then the disconnection might be avoided. | |
Reconnection interval | 30 seconds | It determines the interval of connection requests issued from the monitoring node to the management server. | |
To set up these items when specific information is required for maintenance and troubleshooting.
Normally, setup modification is not required.
Item | Default Value | |
|---|---|---|
Login log | File size | 100KB |
Number of files | 2 | |
Operation log | File size | 100KB |
Number of files | 5 | |
Event log | File size | 100KB |
Number of files | 2 | |
Management server trace log | File size | 200 |
Number of files | 5 | |
Detailed trace log | Yes | |
Monitoring node trace log | File size | 200KB |
Number of files | 5 | |
Detailed trace log | Yes | |
Note
When the system environment settings are modified, the Web-Based Admin View is restarted to make it valid.
