This section describes how to install the component Systemwalker Desktop Patrol ADT for connecting Systemwalker Desktop Patrol CS in order to automatically detect the device information of Systemwalker Desktop Patrol.
To install "ADT", "ADT Module" should be created in advance. For how to create "ADT Module", refer to "2.3.5.10 Set Automatic Detection Schedule (Create ADT Module)".
Point
The software distribution function can be used when installing ADT
When CT has been installed in PC with automatic detection, the software distribution function can be used to distribute and install ADT module.
Note
The PC on which the ADT will be installed must connect to a network environment that meets the following criteria:
The subnet mask is 17 to 28 bits long.
The connection is established using a wired LAN.
Issues to be confirmed before installation
End the following program before installation.
Resident programs included virus scanning program.
The procedures for installing ADT are as follows. Besides, for the operating environment, refer to Systemwalker Desktop Patrol User's Guide.
Log on to Windows with Administrators group affiliated account.
Enter the following URL in the Address bar of Web browser.
http://server information (FQDN name or host name or IP address of "Systemwalker Desktop Patrol CS")/DTP/dwl.html
Besides, when PC which has not be connected Systemwalker Desktop Patrol CS through network has been set as "ADT", copy to PC with "ADT" installed after ADT has been downloaded in PC connecting Systemwalker Desktop Patrol CS through other network.
Download menu is displayed, the following window is displayed after clicking ADT Download.
Click ADT module to download.
Place downloading module (ADTSetup.exe) to an arbitrary location in PC with automatic detection in each network segment and execute.
Enable the following installer, set the installation target and Account Information During Task Registration, and click the Start button to start installation.
[In the environment of Windows Vista(R), Windows(R) 7, Windows(R) 8, Windows Server(R) 2008, and Windows Server(R) 2012]
Item | Description | |
|---|---|---|
Folder | Set the installation target of ADT module. | |
Account Information During Task Registration (Notes) | User ID | Specify the user account for executing the task. Specify it with alphanumeric characters within 260 characters in the format of <Domain Name>\< User Name >. |
Password | Specify the password for the specified user ID in the user account. Specify it with alphanumeric characters within 260 characters. | |
Notes) Displayed only in case of Windows Vista(R), Windows(R) 7, Windows(R) 8, Windows Server(R) 2008, and Windows Server(R) 2012.
The Schedulling of Automatic Detection window will be displayed before installation.
Enter the following information and click the Apply button.
Item | Description | |
|---|---|---|
On Demand Device Information Notification | Selected if not to notify the device information detected by ADT by scheduler. | |
Scheduled Device Information Notification | Selected if to notify the device information detected by ADT by scheduler. | |
Notification Target Settings | Connection Server | Set the server name of notification target. Note Communication in IPv6 environments IPv6 addresses cannot be specified. For communication in IPv6-only environments, register beforehand using one of the following patterns, and then enter the host name:
|
Port Number | Set the port number of notification target. Set in case of not initial value port 80. | |
Set | Used when setting proxy. | |
Collect Devices Not Registered in Ledger (Detailed Collection) | Select this option to perform automatic detection and information collection of devices for maintaining the management ledger. This option cannot be selected if Collect Devices Connected to without Permission (Simple Collection) is selected. | |
Scheduler Setting | Daily | Selected when notifying device information every day. |
Weekly | Selected when notifying device information weekly. Set as that Monday to Sunday can be selected. | |
Monthly | Selected when notifying the device information monthly. Select the execution date in Execution Date. Besides, as Execution Date, if the date not existing in the set month has been specified, automatic detection cannot be performed in this month. Thus, to execute at the end of a month, study the use of execution at 00:00 on the first day of the month. | |
Start Time | Set the time for starting to notify the device information. When using ADT module on server PC which does not operate around the clock, if time such as late at night has been set, then the power for PC with automatic detection might be cut off, so pay attention to the time settings. | |
Collect Devices Connected to without Permission (Simple Collection) | Select this option to perform automatic detection and information collection of devices connected to without permission. This option cannot be selected if Collect Devices Not Registered in Ledger (Detailed Collection) is selected. | |
Collection Interval | Specify the interval for collecting device information when detecting devices connected to without permission. Device information will be repeatedly collected at this interval. Select one of the following intervals:
| |
Confirm Execution Result | Display the execution result. | |
Log Viewing | Display execution result log. | |
After completing the installation, register the following tasks in the task function of Windows.
Name:
SWDTPAS_ADT.job
Operating authority:
In case of Windows Vista(R), Windows(R) 7, Windows(R) 8, Windows Server(R) 2008, or Windows Server(R) 2012: specified account
Besides, if ADT module has not be started in the set aggregating timing (due to PC power not switched on, etc.), the device information will be notified at the start time for scheduler settings after ADT module is started.
The following message window will be displayed after scheduler settings have been ended, click the OK button.
Installation of ADT was Ended. A Setup becomes Effective by Rebooting System.
Click the Apply button to reboot the system.
When starting the automatic detection schedule and modifying the schedule after installation is completed, the system should be rebooted. The settings will be valid after the system is started next time.
