システム監視
MpOpagtで始まるメッセージ
旧
MpOpagt: 警告: 47: 上位ノード (%1) への送信メッセージを破棄しました (データ数=%2)
新
MpOpagt: 警告: 47: 上位ノード (%1) への送信メッセージを破棄しました (データ数=%2) 。上位ノード（メッセージ送信先システム ）が停止している。または、大量のメッセージが発生している。または、ネットワークで異常が発生した場合、上位ノードに送信できなかったメッセージを保存します。保存メッセージが[通信環境定義]-[保存データ数]を超えた場合、古いメッセージから破棄します。
旧
MpOpagt: エラー: 57: 内部動作異常が発生しました(_write)
新
MpOpagt: エラー: 322: ファイルシステムの空き領域不足のため、ログファイル(%1)にデータを書き込むことができませんでした。ファイルシステムの空き領域を確保してください。
旧
MpOpagt:エラー:122:異常（FlushViewOfFile()-XXXX）が発生しました
新
MpOpagt:エラー:323: イベントログのメッセージ監視の管理情報をハードディスクに書き込むことができませんでした。システムのシャットダウン処理中に本メッセージが出力された場合は一時的な書き込みエラーであるため対処は必要ありません。それ以外のタイミングで出力された場合、ハードディスクに異常が見られないか確認してください。
旧
MpOpagt: 警告: 126: メッセージ送信先システム定義に定義されているホスト(%1)はシステムに定義されていません。この行を無視します
新
MpOpagt: 警告: 126: メッセージ送信先システム定義に定義されているホスト(%1)はシステムに定義されていません。あるいは、DNSサーバからIPアドレスを取得できませんでした。IPアドレス取得のためのリトライ処理を開始します。
旧
MpOpagt: 57: 内部動作異常が発生しました (_commit)
新
MpOpagt:エラー:324: メッセージログあるいはコマンドログ (%1)をハードディスクに書き込むことができませんでした。システムのシャットダウン処理中に本メッセージが出力された場合は一時的な書き込みエラーであるため対処は必要ありません。それ以外のタイミングで出力された場合、ハードディスクに異常が見られないか確認してください。
旧
MpOpagt: ERROR: 159: Failed in reading Unnotify Data Save File (%1)
新
MpOpagt: ERROR: 159: Failed to read the unsent data archive file '%1'.
旧
MpOpagt: ERROR: 49: Failed in writing Unnotify Data Save File (%1)
新
MpOpagt: ERROR: 49: Failed to write the unsent data archive file '%1'.
MpOpguiで始まるメッセージ
旧
MpOpgui: エラー: 51: bindでエラーが発生しました:アドレスがすでに使われています。(mpstartsv)
新
MpOpgui: エラー: 8530: システム監視設定機能(サービス名：opmgrdef)のポート番号(%1)が既に使用されています。別の番号をネットワーク内で一意になるように設定し直してください(全ての運用管理サーバ、部門管理サーバ、業務サーバ、運用管理クライアント、クライアントで変更が必要です)。
旧
MpOpgui: ERROR: 8528: Failed to exec chaild process(%1).
新
MpOpgui: ERROR: 8528: Failed to exec child process(%1).
MpOpmlnで始まるメッセージ
旧
MpOpmln: エラー: 1004: bindでエラーが発生しました (5,10048,AR_bind,100)
新
MpOpmln: エラー: 1035: サーバ間連携機能(サービス名：opmgrln)のポート番号(%1)が既に使用されています。別の番号をネットワーク内で一意になるように設定し直してください(全ての運用管理サーバでの変更が必要です)。
mpstayevtinitで始まるメッセージ
旧
mpstayevtinit:ERROR: 3500: Failed to initialize the Syatem Monitor log system.
新
mpstayevtinit:ERROR: 3500: Failed to initialize the System Monitor log system.
opadefで始まるメッセージ
旧
opadef: エラー: 51: bindでエラーが発生しました:アドレスがすでに使われています。(mpstartsv)
新
opadef: エラー: 8530: システム監視設定機能(サービス名：opmgrdef)のポート番号(%1)が既に使用されています。別の番号をネットワーク内で一意になるように設定し直してください(全ての運用管理サーバ、部門管理サーバ、業務サーバ、運用管理クライアント、クライアントで変更が必要です)。
旧
opadef: ERROR: 8528: Failed to exec chaild process(%1).
新
opadef: ERROR: 8528: Failed to exec child process(%1).
opagtdで始まるメッセージ
旧
UX:opagtd: 警告: 21: ホスト名 (%1) はシステムに定義されていません
新
UX:opagtd: 警告: 21: ホスト名 (%1) はシステムに定義されていません。あるいは、DNSサーバからIPアドレスを取得できませんでした。IPアドレス取得のためにリトライを始めます。
旧
opagtd: INFO: 134: The System Monitoring Agent has started.
opagtd: 情報: 134: システム監視エージェントサービスが開始しました
新
opagtd: INFO: 119: The System Monitoring Agent has started.
旧
opagtd: 警告: 47: 上位ノード (%1) への送信メッセージを破棄しました (データ数=%2)
新
opagtd: 警告: 47: 上位ノード (%1) への送信メッセージを破棄しました (データ数=%2) 。上位ノード（メッセージ送信先システム ）が停止している。または、大量のメッセージが発生している。または、ネットワークで異常が発生した場合、上位ノードに送信できなかったメッセージを保存します。保存メッセージが[通信環境定義]-[保存データ数]を超えた場合、古いメッセージから破棄します。
旧
opagtd: エラー: 51: writeでエラーが発生しました:デバイス上に十分な領域がありません。(%1)
新
opagtd: エラー: 322: ファイルシステムの空き領域不足のため、ログファイル(%1)にデータを書き込むことができませんでした。ファイルシステムの空き領域を確保してください。
旧
opagtd: エラー: 51: bindでエラーが発生しました:アドレスがすでに使われています。(opaacpt)
新
opagtd: エラー: 325: システム監視機能（サービス名：uxpopagt）のポート番号(%1)が既に使用されています。別の番号をネットワーク内で一意になるように設定し直してください(全ての運用管理サーバ、部門管理サーバ、業務サーバ、運用管理クライアント、クライアントで変更が必要です)。
旧
opagtd: エラー: 51: bindでエラーが発生しました:アドレスがすでに使われています。(opaacpt2)
新
opagtd: エラー: 326: システム監視機能(グローバルサーバ監視、サービス名：FJSVgssagt)のポート番号(%1)が既に使用されています。別の番号をネットワーク内で一意になるように設定し直してください(運用管理サーバ、監視対象のグローバルサーバ上で動作するMC/FSOCKETの変更が必要です)。
旧
opagtd: ERROR: 159: Failed in reading Unnotify Data Save File (%1)
新
opagtd: ERROR: 159: Failed to read the unsent data archive file '%1'.
旧
opagtd: ERROR: 49: Failed in writing Unnotify Data Save File (%1)
新
opagtd: ERROR: 49: Failed to write the unsent data archive file '%1'.
[ハード監視制御]ウィンドウの[メッセージフレーム]に表示されるメッセージ
旧
0000000ISS004071 監視装置の切替開始を検出しました
新
0001000WSS004071 監視装置の切替開始を検出しました
旧
0000000ISS004071 監視装置の切替終了を検出しました
新
0001000WSS004071 監視装置の切替終了を検出しました
FTOPS-II(タイプ2を含む)、SVPM、およびSVPM-Sの連携メッセージ
SVPM基本部に異常が発生し運用系装置切り替えを開始したときに、Systemwalker Centric Managerが以下メッセージを表示するようになります。
監視装置の切替開始を検出しました |
SVPM基本部に異常が発生しSVPM運用系装置切り替えが終了したときに、Systemwalker Centric Managerが以下メッセージを表示するようになります。
監視装置の切替終了を検出しました |
自動運用支援
MpAosfBで始まるメッセージ
旧
MpAosfB: ERROR: 500: Failed to copy policy file. Definition File name : %1 Reason : %2
新
MpAosfB: ERROR: 500: Failed to copy policy file. Definition File name : %1
旧
MpAosfB: WARNING: 1001: Standard expression in condition definition settings of event monitoring is incorrect(line number %1)
新
MpAosfB: WARNING: 1001: Standard expression set in Monitored Event Table is improper. Line number : %1
旧
MpAosfB: ERROR: 1002: Failure in creating the socket. reason %1
新
MpAosfB: ERROR: 1002: Failed to create socket. Reason : %1
旧
MpAosfB: ERROR: 1003: Failed to change signals.
新
MpAosfB: ERROR: 1003: Failed to change signal
旧
MpAosfB: ERROR: 1004: Failed to open file of convert character code.
新
MpAosfB: ERROR: 1004: Failed to open code conversion table.
旧
MpAosfB: ERROR: 1005: Specified DLL(%1) can not open. reason:%2
新
MpAosfB: ERROR: 1005: Failed to open DLL (%1). Reason : %2
旧
MpAosfB: ERROR: 1006: Specified symbol(%1) does not exist in DLL(%2) reason:%3
新
MpAosfB: ERROR: 1006: Symbol does not exist in DLL(%1).Function : (%2) Reason : (%3)
旧
MpAosfB: WARNING: 1007: Failed to execute thread.(thread name %1)
新
MpAosfB: WARNING: 1007: Failed to execute thread. Thread name : (%1)
旧
MpAosfB: ERROR: 1008: Abandon data. reason:error of automatic address
新
MpAosfB: ERROR: 1008: Transmission destination of message is not set correctly. The message data is discarded.
旧
MpAosfB: ERROR: 1009: Failed to create socket. %1
新
MpAosfB: ERROR: 1009: Failed to connect socket. Reason : %1
旧
MpAosfB: ERROR: 1010: Error in system function.(function name "select")
新
MpAosfB: ERROR: 1010: Failure in select process.
旧
MpAosfB: WARNING: 1011: Failed to connect with System Monitoring Agent.
新
MpAosfB: WARNING: 1011: Error occurred in connecting with System Monitoring Agent.
旧
MpAosfB: WARNING: 1012: Failed to connect with link of automatic
新
MpAosfB: WARNING: 1012: Error occurred in connecting with System Monitoring Manager.
旧
MpAosfB: ERROR: 1014: Failed to receive message and connect.
新
MpAosfB: ERROR: 1014: Error occurred in connecting with event send source process.
旧
MpAosfB: INFO: 1015: Failed to create file. File name is %1. reason %2
新
MpAosfB: INFO: 1015: Failed to create file. File name : %1. Reason : %2
旧
MpAosfB: ERROR: 1016: Failed to read data from file. File name is %1. reason %2
新
MpAosfB: ERROR: 1016: Failed to read data from file. File name : %1. Reason : %2
旧
MpAosfB: ERROR: 1017: Failed to write data. File name is %1. reaso:%2
新
MpAosfB: ERROR: 1017: Failed to write data in the file. File name : %1. Reason : %2
旧
MpAosfB: ERROR: 1018: Failed to convert character code. [%1]
新
MpAosfB: ERROR: 1018: Failed to convert code. [%1]
旧
MpAosfB: WARNING: 1019: Specified executing directory does not exist. Directory name is %1.
新
MpAosfB: WARNING: 1019: The directory with the specified execution time does not exist. Directory name : %1.
旧
MpAosfB: WARNING: 1020: Failed to create process. (Process name which make child process: %1)
新
MpAosfB: WARNING: 1020: Failed to create process. Occurrence source process name : %1
旧
MpAosfB: WARNING: 1021: Calendar name specified in Action Execution Condition is not defined (%1)
新
MpAosfB: WARNING: 1021: The calendar name specified in action execution condition is not defined. Calendar name : %1
旧
MpAosfB: WARNING: 1022: Error in Calendar service. (%1) reason:%2
新
MpAosfB: WARNING: 1022: Error occurred in calendar service. Calendar name : %1 Error code : %2
旧
MpAosfB: WARNING: 1023: Calendar service has no been started.
新
MpAosfB: WARNING: 1023: Calendar service is not started.
旧
MpAosfB: WARNING: 1024: Starting file does not exist. (File name is %1)
新
MpAosfB: WARNING: 1024: Execution file does not exist. File name : %1
旧
MpAosfB: ERROR: 1025: Error in Action definition. %1(%2)
新
MpAosfB: ERROR: 1025: There is an error in action definition. Action : %1 Detailed code : %2
旧
MpAosfB: ERROR: 1026: Action Management Server is busy or has not been started.
新
MpAosfB: ERROR: 1026: The Action Control Server is not started or is busy. Action : %1
旧
MpAosfB: ERROR: 1027: Environment for action execution has not been set. %1
新
MpAosfB: ERROR: 1027: The environment that executes action is not set. Action : %1
旧
MpAosfB: ERROR: 1028: Failure in communicate with Action Management Server.(%1)
新
MpAosfB: ERROR: 1028: Error occurred in communicating with Action Management Server. Action : %1
旧
MpAosfB: ERROR: 1029: Error in Action Management Server.(%1)
新
MpAosfB: ERROR: 1029: Error occurred in Action Control Server. Action : %1
旧
MpAosfB: ERROR: 1030: Error in definition of Event Monitoring Function.(File name is %1)
新
MpAosfB: ERROR: 1030: There is an error in the definition of Monitored Event Table. File name : %1
旧
MpAosfB: INFO: 1100: Start Same Action Hold.
新
MpAosfB: INFO: 1100: Start Same Action Hold. %1 m
旧
MpAosfB: ERROR: 3001: Thread is abnormal ended.
新
MpAosfB: ERROR: 3001: The Action Control Server is shutdown, as abnormality occurred.
旧
MpAosfB: ERROR: 3002: Environment Definition file is not exist.
新
MpAosfB: ERROR: 3002: Environment definition file does not exist.
旧
MpAosfB: ERROR: 3003: Insufficient memory. Cannot execute the action.
新
MpAosfB: ERROR: 3003: Action cannot be executed as memory is insufficient. Control number : %1
旧
MpAosfB: ERROR: 3004: Insufficient memory. Cannot accept the action.
新
MpAosfB: ERROR: 3004: Action request cannot be received as memory is insufficient.
旧
MpAosfB: ERROR: 3005: Error in system function. Function:%1 Reason:%2
新
MpAosfB: ERROR: 3005: Error occurred in system function. System function name : %1 Reason : %2
旧
MpAosfB: ERROR: 3006: Failure in initialize socket.File:%1 Reason:%2
新
MpAosfB: ERROR: 3006: Failed to initialize socket. File name : %1 Reason : %2
旧
MpAosfB: ERROR: 3007: Failure in initialize socket.Port:%1 Reason:%2
新
MpAosfB: ERROR: 3007: Failed to initialize socket. Port : %1 Reason : %2
旧
MpAosfB: ERROR: 3008: Failure in communication with API.
新
MpAosfB: ERROR: 3008: Failed to communicate with API.
旧
MpAosfB: ERROR: 3009: Failure in initialize iconv.
新
MpAosfB: ERROR: 3009: Failed to open code conversion table.
旧
MpAosfB: ERROR: 3010: Failed to get action list for full memory.
新
MpAosfB: ERROR: 3010: List cannot be acquired as memory is insufficient.
旧
MpAosfB: ERROR: 3011: Failed to convert code.
新
MpAosfB: ERROR: 3011: Failure in code conversion process.
旧
MpAosfB: ERROR: 3012: Failure in communication with Action Management Screen.
新
MpAosfB: ERROR: 3012: Failed to connect with Action Control window.
旧
MpAosfB: ERROR: 3013: Break with Action Management Screen.(reason:communication error)
新
MpAosfB: ERROR: 3013: Communication with Action Control window is cut off.
旧
MpAosfB: ERROR: 3014: "Send to" address is not specified
新
MpAosfB: ERROR: 3014: Send destination is not specified.
旧
MpAosfB: ERROR: 3015: Action execution Host is not specified. Action:%1
新
MpAosfB: ERROR: 3015: Action execution host is not specified. Action : %1
旧
MpAosfB: ERROR: 3016: %1 has not been started.
新
MpAosfB: ERROR: 3016: Action execution server is not started. Host name : %1
旧
MpAosfB: ERROR: 3017: Can not find %1
新
MpAosfB: ERROR: 3017: Action execution host does not exist. Host name : %1
旧
MpAosfB: ERROR: 3018: Failed to connect to Action-Execute-Server. Host:%1 Resaon:%2
新
MpAosfB: ERROR: 3018: Failed to connect with Action Execution Server. Host name : %1 Reason : %2
旧
MpAosfB: ERROR: 3019: Failure in communication with Action Server. ControlID:%1 Host:%2 Reason:%3
新
MpAosfB: ERROR: 3019: Error occurred in communication with Action Execution Server. Control number : %1 Host name : %2 Reason : %3
旧
MpAosfB: ERROR: 3020: The Action-Execute-Server is already executing action. Host:%1 Request from: %2
新
MpAosfB: ERROR: 3020: Specified Action Execution Server is executing the actions according to the request of other server. Host name : %1 Request source : %2
旧
MpAosfB: ERROR: 3021: System error occured at Action-Execute-Server. ControlID:%1 Host:%2
新
MpAosfB: ERROR: 3021: System error occurred in Action Execution Server. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3022: The environment of execute action is not installed. ControlID:%1 Host:%2
新
MpAosfB: ERROR: 3022: The environment of execute action is not installed. ControlID : %1 Host : %2
旧
MpAosfB: ERROR: 3023: The environment of execute action is not setup. ControlID:%1 Host:%2
新
MpAosfB: ERROR: 3023: Action execution environment is not defined. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3024: Failed to load Dynamic Link Library(%1). ContolID:%2 Host name:%3
新
MpAosfB: ERROR: 3024: Failed to load Dynamic Link Library(%1). Control number : %2 Host name : %3
旧
MpAosfB: ERROR: 3050: Action execution environment is not defined. Control number : %1 Host name : %2
新
MpAosfB: ERROR: 3050: The address of send source is not set.
旧
MpAosfB: ERROR: 3051: "SMTP Server" is not specified.
新
MpAosfB: ERROR: 3051: SMTP server is not set.
旧
MpAosfB: ERROR: 3052: Failed to connect to SMTP server. Failed to connect to the SMTP server. Check the status of the SMTP server, and relay the error code and message to the administrator of the SMTP server. Server name:%1 Reason:%2
新
MpAosfB: ERROR: 3052: Failed to connect to the SMTP server. Check the status of the SMTP server, and relay the error code and message to the administrator of the SMTP server. Server name: %1, Cause: %2
旧
MpAosfB: ERROR: 3053: Failure in communication with SMTP server. Server name:%1 Reason:%2
新
MpAosfB: ERROR: 3053: Error occurred in communication process of SMTP server. Server name : %1 Reason : %2
旧
MpAosfB: ERROR: 3054: Connection denied to SMTP server. Check the status of the SMTP server, and relay the error code and message to the administrator of the SMTP server. Server name:%1 Reason:%2
新
MpAosfB: ERROR: 3054: Connection to SMTP server is denied. Check the status of the SMTP server, and relay the error code and message to the administrator of the SMTP server. Server name : %1 Reason : %2
旧
MpAosfB: ERROR: 3055: Failed to open file. File name:%1 Reason:%2
新
MpAosfB: ERROR: 3055: Failed to open file. File name : %1 Reason : %2
旧
MpAosfB: ERROR: 3056: Failure in input/output file. Reason:%1
新
MpAosfB: ERROR: 3056: Error occurred in input output process of file. Reason : %1
旧
MpAosfB: ERROR: 3057:Failure in make work file. File name:%1 Resaon:%2
新
MpAosfB: ERROR: 3057:Failed to create work file. File name : %1 Reason : %2
旧
MpAosfB: ERROR: 3058: SMTP server returned an error. Check the sender and the recipient addresses. If the specified addresses are correct, relay the error code and message to the administrator of the SMTP server. Server name:%1 Reason:%2
新
MpAosfB: ERROR: 3058: SMTP server returned an error. Check the sender and the recipient addresses. If the specified addresses are correct, relay the error code and message to the administrator of the SMTP server. Server name: %1, Cause: %2
旧
MpAosfB: ERROR: 3060: "POP authentication account" is not specified.
新
MpAosfB: ERROR: 3060: POP authentication account is not specified.
旧
MpAosfB: ERROR: 3080: Profile name required for logon has not been specified. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3080: Profile name is not specified. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3081: Failed to logon to MS-Mail session. ControlID:%1 Host name:%2 Code:%3
新
MpAosfB: ERROR: 3081: Failed to login to MS-Mail. Control number : %1 Host name : %2 Code : %3
旧
MpAosfB: ERROR: 3082: Specifed MS-Mail session does not exist. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3082: Specified MS-Mail session does not exist. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3083: Failure in sending MS-Mail. ControlID:%1 Host name:%2 Code:%3
新
MpAosfB: ERROR: 3083: Failure in send process of MS-Mail. Control number : %1 Host name : %2 Code : %3
旧
MpAosfB: ERROR: 3084: Invalid MS-Mail send address. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3084: Send destination address specified in MS-Mail send is inappropriate. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3085: The file specified to MS-Mail does not exist. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3085: Send file, which is specified in MS-Mail send, does not exist. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3086: Failed to open the file specified to MS-Mail. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3086: Failed to open the send file specified in MS-Mail send. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3100: Specified pager company is not entered. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3100: Pager company is not registered. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3101: Failed to convert the message. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3101: Error occurred in code conversion process of message. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3102: COM port is not exist. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3102: COM port is not exist. ControlID:%1 Host name : %2
旧
MpAosfB: ERROR: 3103: Connection denied to COM port. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3103: Access to COM port is denied. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3104: Failed to open COM port. ControlID:%1 Host name:%2 Code:%3
新
MpAosfB: ERROR: 3104: Failed to open COM port. Control number : %1 Host name : %2 Code : %3
旧
MpAosfB: ERROR: 3105: Failed to input/output COM port. ControlID:%1 Host name:%2 Code:%3
新
MpAosfB: ERROR: 3105: Error occurred in input output process of COM port. Control number : %1 Host name : %2 Code : %3
旧
MpAosfB: ERROR: 3106: Can not connect to pager company as it is busy. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3106: Cannot not contact the pager company as the line is busy. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3107: Cannot receive carrier signal from telephone. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3107: Carrier signals cannot be received from the telephone line. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3108: Received error signal from telephone. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3108: Received error signals from telephone line. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3109: Cannot get dial tone from telephone. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3109: Dial tone cannot be detected from the telephone line. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3110: No response from telephone. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3110: There is no response from the telephone line. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3111: Dialed number is blacklisted. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3111: The telephone line was disconnected. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3112: Telephone line is disconnected. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3112: Dialed number is blacklisted. ControlID:%1 Host name:%2
旧
MpAosfB: ERROR: 3150: Error in send option of pop-up message. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3150: Error occurred in send process of pop up message. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3151: Failed to get address to send option of pop-up message.ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3151: Send destination address of pop up message cannot be acquired. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3200: No audio device driver is present. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3200: Sound driver is not installed. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3201: No audio device driver is present,or already allocated by other process. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3201: Either the sound card is not installed or it is being used in some other process. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3202: The audio device is already allocated by other process. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3202: Sound driver is being used in some other process. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3203: Failure in opening the wave dictionary or the language dictionary. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3203: Cannot open the dictionary used for voice reproduction. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3204: Failure in audio composition. ContolID:%1 Host name:%2 Code:%3 Detail:%4
新
MpAosfB: ERROR: 3204: Failure in speech synthesis process. Control number : %1 Host name : %2 Code : %3 Detail : %4
旧
MpAosfB: ERROR: 3205: Attempted to open with an unsupported waveform-audio format. ControlID:%1 Host name:%2
新
MpAosfB: ERROR: 3205: Sound driver does not support the waveform format that is used for voice reproduction. Control number : %1 Host name : %2
旧
MpAosfB: ERROR: 3206: System error occurred at playing the sound. ControlID:%1 Host name:%2 Code:%3 Detail:%4
新
MpAosfB: ERROR: 3206: System error occurred during sound reproduction. Control number : %1 Host name : %2 Code : %3 Detail : %4
旧
MpAosfB: ERROR: 3207: Failed to execute action. Action:%1 ControlID:%2 Host name:%3 Code:%4 Detail:%5
新
MpAosfB: ERROR: 3207: Failed to execute action. Action:%1 Control number : %2 Host name : %3 Code : %4 Detail code : %5
旧
MpAosfB: ERROR: 3300: Failure in the mail writing in a cipher.
新
MpAosfB: ERROR: 3300: Failure in encrypting mail. Code: %1
旧
MpAosfB: ERROR: 3301: Invalid mail address specified. Address: %1
新
MpAosfB: ERROR: 3301: An illegal receipt person was specified for the mail address. Address: %1
旧
MpAosfB: ERROR: 3302: The Environment of Mpcrtmgr is invalid. code=%1
新
MpAosfB: ERROR: 3302: The certificate management environment is not correctly set. Code: %1
旧
MpAosfB: ERROR: 3303: The Environment of Centificate Management Interface is invalid. code=%1
新
MpAosfB: ERROR: 3303: CMI environment is not correctly set. Code: %1
旧
MpAosfB: ERROR: 3304: Specified address is not registered the Centificate.
新
MpAosfB: ERROR: 3304: The certificate is not registered in the mail address.
旧
MpAosfB: ERROR: 5000: Failed to open DLL. reason:%1.
新
MpAosfB: ERROR: 5000: Failed to open DLL(%1). Reason : %2
旧
MpAosfB: ERROR: 5001: Symbol of DLL does not exist. reason:%1
新
MpAosfB: ERROR: 5001: The symbol of DLL(%1) does not exist. Function name : %2 Reason : %3
旧
MpAosfB: ERROR: 5002: Failed to open Event Action definition File(%1).
新
MpAosfB: ERROR: 5002: Failed to open definition file. File name : %1
旧
MpAosfB: ERROR: 5003: Error in received data.(from %1).
新
MpAosfB: ERROR: 5003: Receive data is abnormal. Send source : %1
旧
MpAosfB: ERROR: 5004: Error in received data.(code %1)(data %2)
新
MpAosfB: ERROR: 5004: Receive data is abnormal. Code : %1 Data : %2
旧
MpAosfB: ERROR: 5005: Error in Event Action definition File(%1) structure.
新
MpAosfB: ERROR: 5005: Structure of definition file is abnormal. File name : %1
旧
MpAosfB: ERROR: 5006: Failed to get information of pager companies.
新
MpAosfB: ERROR: 5006: Failed to get the list of pager companies.
旧
MpAosfB: ERROR: 5007: The Systemwalker Centric Manager is not being started.Please restart the Systemwalker Centric Manager on the Operation Management Server.(Detailed code=%1,%2)
新
MpAosfB: ERROR: 5007: The Systemwalker Centric Manager is not being started. Please restart the Systemwalker Centric Manager on the Operation Management Server.(Detailed code=%1,%2)
旧
MpAosfB: ERROR: 5008: The setup of Systemwalker Centric Manger is not executed or communication error occurs.(Detail code=%1,%2)
新
MpAosfB: ERROR: 5008: The setup of Systemwalker Centric Manager is not executed or communication error occurs.(Detail code=%1,%2)
旧
MpAosfB: WARNING: 5012: Failed to acquire the library of System Monitoring Manager.
新
MpAosfB: WARNING: 5012: Failed to acquire the System Monitoring Manager library. Process is carried out considering that it is environment in which System Monitoring Manager does not existing.
旧
MpAosfB: WARNING: 5013: Failed to acquire the library of Calendar Service.
新
MpAosfB: WARNING: 5013: Failed to acquire the calendar service library. Process is carried out without calendar service.
旧
MpAosfB: WARNING: 5014: Failed to acquire the library of System Name Information List.
新
MpAosfB: WARNING: 5014: Failed to acquire system name list information library. Process is carried out considering that it is an environment in which system name list information does not exist.
旧
MpAosfB: ERROR: 5015: Failed to access the file.
新
MpAosfB: ERROR: 5015: Error occurred in file operation.
旧
MpAosfB: ERROR: 5016: Failure in %1. %2
新
MpAosfB: ERROR: 5016: Error occurred in policy registration process. Function name : %1 Code : %2
旧
MpAosfB: ERROR: 5017: Failure in initialize socket.Port:%1 Reason:%2
新
MpAosfB: ERROR: 5017: Failure in initialize socket. Port : %1 Reason : %2
旧
MpAosfB: ERROR: 5018: Failure in initialize socket.File:%1 Reason:%2
新
MpAosfB: ERROR: 5018: Failure in initialize socket. File : %1 Reason : %2
旧
MpAosfB: ERROR: 5019: Failed to issue Policy send command. Reason:%1
新
MpAosfB: ERROR: 5019: The text string defined of Monitored Event Table is too long. Line number < %1 >.
旧
MpAosfB: ERROR: 5021: Event Monitoring Definition will be discarded as the Number of Definitsion has crossed Maxmum.
新
MpAosfB: ERROR: 5021: Event Monitoring Definition will be discarded as the Number of Definition has crossed Maximum.
旧
MpAosfB: ERROR: 5100: Failed to get the host name of the Operation Management Server for the domain of the host '%1'. Domain: %1
新
MpAosfB: ERROR: 5100: Failed to get the host name of the Operation Management Server for the domain of the host <%1>. Domain: %2
旧
MpAosfB: ERROR: 7000: Insufficient memory.(Process name where error occurred:%1)
新
MpAosfB: ERROR: 7000: Memory is insufficient. Occurrence source : (%1)
旧
MpAosfB: ERROR: 7001: Process has ended. Process name %1 End code %2
新
MpAosfB: ERROR: 7001: The process ended. Process name : %1 End code : %2
旧
MpAosfB: ERROR: 7002: Error in internal operations.(Process name where error occurred:%1)
新
MpAosfB: ERROR: 7002: Internal operation abnormality occurred. Occurrence source process name : (%1)
旧
MpAosfB: ERROR: 7003: Failed to receive data.(Process name where error occurred:%1)
新
MpAosfB: ERROR: 7003: Failed to receive data. Occurrence source process name : %1
旧
MpAosfB: ERROR: 7004: Failed to send data.(Process name where error occurred: %1)
新
MpAosfB: ERROR: 7004: Failed to send data. Occurrence source process name : %1
旧
MpAosfB: ERROR: 7005: Failed to open definition file. Screen:%1 (File Name %2)(Process name where error occurred:%3)
新
MpAosfB: ERROR: 7005: Failed to open definition file. Reason : %1 File name : %2 Occurrence source process name : %3
旧
MpAosfB: ERROR: 7006: Failed to read definition file.(File Name %1)(Process name where error occurred:%2)
新
MpAosfB: ERROR: 7006: Failed to read definition file. File Name : %1 Occurrence source process name : %2
旧
MpAosfB: ERROR: 7007: Failed to write definition file.(File Name %1)(Process name where error occurred: %2)
新
MpAosfB: ERROR: 7007: Failed to write definition file. File Name : %1 Occurrence source process name : %2
旧
MpAosfB: ERROR: 7008: Failed to receive data according to socket. reason:%1(Process name where error occurred: %2)
新
MpAosfB: ERROR: 7008: Failed to receive data according to socket. Reason : %1 Occurrence source process name: %2
旧
MpAosfB: ERROR: 7009: Failed to send data according to socket. reason:%1(Process name where error occurred: %2)
新
MpAosfB: ERROR: 7009: Failed to send data according to socket. Reason : %1 Occurrence source process name : %2
旧
MpAosfB: ERROR: 7010: Failed to open Event Definition File.reason:%1 (File name is %2) ((Process name where error occurred: %3)
新
MpAosfB: ERROR: 7010: Failed to open definition file. Reason : %1 File name : %2 Occurrence source process name : %3
旧
MpAosfB: ERROR: 7011: Error in system function. Called from: %1 System function: %2 Reason: %3
新
MpAosfB: ERROR: 7011: Error occurred in system function. Calling source : %1 System function : %2 Reason : %3
