Unable to start the registry server of port ({0}). The port may already be used by another program.
Explanation
The registry server provided by the Manager function could not be started. Another program may use the same port number.
Parameters
{0} :Number of the port for which the Manager provides various functions.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the system environment for problems, such as the operating conditions of other applications.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unable to start the remote service ({0}).
Explanation
The remote service provided by the Manager function could not be started.
Parameters
{0} : Name of the remote service provided by the Manager
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unable to connect to the manager. Please check whether the manager is operating correctly. The manager address is {0}:{1}.
Explanation
Attempted communication with the Manager failed because a connection to the Manager could not be established.
Parameters
{0} : Address used to communicate with the Manager
{1} : Port number
System Response
The system terminates processing.
System Administrator Corrective Action
If the error occurred in the network environment:
Check for connection problems on the network to the Manager.
Check whether any LAN cables are disconnected and whether any LAN cables or network devices are damaged.
If the Manager has stopped:
For Windows:
Open Control Panel > Administrative Tools > Services to check the service status of the ETERNUS SF Storage Cruiser Optimization Option. If it is not running, start it.
For Solaris or Linux:
Execute the following command to check whether the manager is running.
# /bin/ps -ef | grep /opt/FJSVssast/jre/bin/java | grep ast=daemon | grep -v grep
If the process is not displayed, it is necessary to start the manager.
In the case of cluster operation, start the cluster application of the manager.
In the case of non-cluster operation, execute the following command.
# /opt/FJSVssast/bin/astctl start
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unable to access to the manager. Please check whether the manager is operating correctly. The manager address is {0}:{1}.
Explanation
It failed to communicate with the Manager.
Parameters
{0} : Address used to communicate with the Manager
{1} : Port number
System Response
The system terminates processing.
System Administrator Corrective Action
If the error occurred in the network environment:
Check for connection problems on the network to the Manager.
Check whether any LAN cables are disconnected and whether any LAN cables or network devices are damaged.
If the Manager has stopped:
For Windows:
Open Control Panel > Administrative Tools > Services to check the service status of the ETERNUS SF Storage Cruiser Optimization Option. If it is not running, start it.
For Solaris or Linux:
Execute the following command to check whether the manager is running.
# /bin/ps -ef | grep /opt/FJSVssast/jre/bin/java | grep ast=daemon | grep -v grep
If the process is not displayed, it is necessary to start the manager.
In the case of cluster operation, start the cluster application of the manager.
In the case of non-cluster operation, execute the following command.
# /opt/FJSVssast/bin/astctl start
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unexpected error occurred on the manager. The manager address is {0}:{1}.
Explanation
An unexpected error occurred in the Manager, e.g. an internal process error in a program.
Parameters
{0} : Address used to communicate with the Manager
{1} : Port number
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unrecovered error has been detected in communication between client and manager. The manager may have been exited unusually. The manager address is {0}:{1}.
Explanation
An unrecoverable error has been detected in communication with the Manager. The Manager possibly was terminated due to an error while communication was in progress.
Parameters
{0} : Address used to communicate with the Manager
{1} : Port number
System Response
The system terminates processing.
System Administrator Corrective Action
Check that the Manager is running normally.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function Option to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Invalid internal processing has been detected. Unable to use the service ({0}) from any remote clients.
Explanation
An attempt failed to start a service as a remote service without the required permission to use that service. This is an internal process error of the program.
Parameters
{0} : Service name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unable to use the remote service ({2}) on the manager. The manager address is {0}:{1}.
Explanation
A client requested a service that is not provided by the Manager. Possibly this function is not part of the Manager.
Parameters
{0} : Address used to communicate with the Manager
{1} : Port number
{2} : Service name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Illegal internal processing has been detected on the manager. Unable to use the service ({0}).
Explanation
An internal request was made in the Manager for an unavailable service. Either the service is not part of the Manager, or this is an internal process error of the Manager program.
Parameters
{0} : Service name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unable to use the function ({1}) of the service ({0}).
Explanation
A client requested a service function that is not provided by the Manager. Possibly this function is not part of the Manager.
Parameters
{0} : Service name
{1} : Function name of service
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Invalid internal processing has been detected. Unknown remote object ({3}) has been detected in communication between client and manager. The manager address is {0}:{1}/{2}.
Explanation
The incorrect remote object has been detected in communication with the Manager.
Parameters
{0} : Address used to communicate with the Manager
{1} : Port number
{2} : Service name
{3} : Remote object name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Invalid internal processing has been detected on the manager. Unable to create the service ({0}).
Explanation
Invalid internal processing was detected in the Manager. An invalid method was used to initiate the service.
Parameters
{0} : Service name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Invalid internal processing has been detected: {0}
Explanation
Invalid internal processing was detected.
Parameters
{0} : Detected error
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unexpected error has been detected: {0}
Explanation
Unexpected error has been detected.
Parameters
{0} : Detected error
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Required software ({0}) is not installed.
Explanation
The software product required for using this function is not installed.
Parameters
{0} : Required product name
System Response
The system terminates processing.
System Administrator Corrective Action
Check whether the software product required for using this function is installed and properly started.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Writing the xml document is failed.
Explanation
It failed to write the xml document.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Reading the xml document is failed.
Explanation
It failed to read the xml document.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Getting the file list is failed. path={0}
Explanation
It failed to obtain the file list.
Parameters
{0} : Directory path for retrieval of file list
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The file ({0}) is not found. path={1}
Explanation
The file is not found.
Parameters
{0} : File name
{1} : Path name of file
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Encoding string for ({0}) failed.
Explanation
The encoding failed.
Parameters
{0} : Encode
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Creating the new Document object is failed.
Explanation
Creating the new Document object failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unexpected error has occurred.
Explanation
Unexpected error has occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
License management function error has occurred. detail={0}
Explanation
The error has been occurred in the processing of the license management function.
Parameters
{0} : Detail information of license management function
System Response
The system terminates processing.
System Administrator Corrective Action
Respond to the detail information with reference to "Chapter 21 Messages That Begin with ERROR".
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Internal error occurred in license information settings.
Explanation
An internal error occurred in processing the settings for the license information.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The license ({0}) is not registered.
Explanation
The license required to perform this function is not registered.
Parameters
{0} : License key
System Response
The system terminates processing.
System Administrator Corrective Action
Using the license management function, register a license.
If "eternus.sf.storage.cruiser.optimization.option" is output, register the license "ETERNUS SF Storage Cruiser V16 Optimization Option".
And then execute the processing again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Required license ({0}) to enable this function is expired.
Explanation
This function cannot be performed, because the license required to perform this function is expired.
Parameters
{0} : License name
System Response
The system terminates processing.
System Administrator Corrective Action
Obtain the regular license or the trial license.
Using the license management function, delete a expired license and register a new license.
And then execute the processing again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Internal error occurred by ETERNUS SF Storage Cruiser command.
Explanation
Internal error has occurred in the processing with Storage Cruiser.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
ETERNUS SF Storage Cruiser error has occurred. detail=unexpected error has occurred.
Explanation
Unexpected error has occurred in Storage Cruiser.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
ETERNUS SF Storage Cruiser error has occurred. detail={0}
Explanation
The error has occurred in Storage Cruiser.
Parameters
{0} : Error message output by Storage Cruiser
System Response
The system terminates processing.
System Administrator Corrective Action
Based on the error message information output from Storage Cruiser, respond with reference to "Chapter 13 Messages of Ssmgr Prefix" or "Chapter 16 Messages of Swsag Prefix".
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unexpected error has occurred.
Explanation
Unexpected error has occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Loading tiering policy data file failed.
Explanation
It failed to read the Tiering policy file.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Making backup of tiering policy data file is failed.
Explanation
It failed to back up the Tiering policy file.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tiering policy ({0}) was not able to be added to tiering policy data file.
Explanation
It failed to add the Tiering policy data in the file.
Parameters
{0} : Tiering policy name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tiering policy ({0}) was not able to be updated to tiering policy data file.
Explanation
It failed to update the Tiering policy data to the file.
Parameters
{0} : Tiering policy name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tiering policy ({0}) was not able to be removed to tiering policy data file.
Explanation
It failed to delete the Tiering policy data from the file.
Parameters
{0} : Tiering policy name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tiering policy ({0}) exists.
Explanation
The specified Tiering policy is already existed.
Parameters
{0} : Tiering policy name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the Tiering policy name.
If wrong, specify the correct Tiering policy name and execute again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tiering policy ({0}) does not exist.
Explanation
The specified Tiering policy does not exist.
Parameters
{0} : Tiering policy name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the Tiering policy name.
If wrong, specify the correct Tiering policy name and execute again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The Automated Storage Tiering ({0}) has already been started. Policy Name={1}
Explanation
The operation cannot be executed, because the Auto tier service is running.
Parameters
{0} : Tier pool name
{1} : Tiering policy name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the Tiering policy name to take the following actions:
If the Tiering policy name is correct, stop the Auto tier service and try again.
If the Tiering policy name is not correct, specify the correct Tiering policy name before and try again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The number of policy is already the maximum numbers.
Explanation
The number of Tiering policy registrations has reached the maximum.
System Response
The system terminates processing.
System Administrator Corrective Action
Delete any tiered-policies that are no longer needed.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
There is error in Data Range of Tier Level in tiering policy ({0}). Data Range of Tier Level={1}
Explanation
The Low/Middle/High baseline value which is set to the Tiering policy is incorrect.
Parameters
{0} : Tiering policy name
{1} : Baseline value of level
System Response
The system terminates processing.
System Administrator Corrective Action
Check the following, remove the cause of the problem, and execute the command again.
Is a value that is bigger than the minimum value of Middle set to the minimum value of Low?
Is a value that is bigger than the minimum value of High set to the minimum value of Low?
Is a value that is bigger than the maximum value of Middle set to the maximum value of Low?
Is a value that is bigger than the maximum value of High set to the maximum value of Low?
Is a value that is bigger than the minimum value of High set to the minimum value of Middle?
Is a value that is bigger than the maximum value of High set to the maximum value of Middle?
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tier pool ({0}) using tiering policy ({1}) exists.
Explanation
The operation cannot be executed, because the Tier pool that uses the Tiering policy already exists.
Parameters
{0} : Tier pool name
{1} : Tiering policy name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the Tiering policy name and respond as follows:
If the Tiering policy name is correct:
On the overview of Tier pool management, check all Tier pool names that are using the same Tiering policy and have an Auto tier service running.
Then, specifying all confirmed Tier pool names, stop the Auto tier service.
After stopping the Auto tier service, retry processing.
If the Tiering policy name is not correct:
Specify the correct Tiering policy name and try again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
There is error in specified Automated Storage Tiering Time Limit in tiering policy ({0}). Evaluation Period(type)={1} Automated Storage Tiering Time Limit={2}
Explanation
The specified termination time of the Tiering policy is incorrect.
Parameters
{0} : Tiering policy name
{1} : Evaluation type
{2} : Reallocation terminated time
System Response
The system terminates processing.
System Administrator Corrective Action
Check the value that is set to the [Automated Storage Tiering Time Limit] of the Tiering policy.
If wrong, specify the correct value by referring to the following information and then try again.
When the unit of the Evaluation Period is "Hour", a value from 00 up to the value specified with the Evaluation Period can be specified.
When the unit of the Evaluation Period is "Day", a value from 00 through 24 can be specified.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
There is error in specified Evaluation Period in tiering policy ({0}). Evaluation Period(type)={1} Evaluation Period(interval)={2}
Explanation
The specified evaluation interval of the Tiering policy is incorrect.
Parameters
{0} : Tiering policy name
{1} : Evaluation type
{2} : Evaluation interval
System Response
The system terminates processing.
System Administrator Corrective Action
Check the value that is set to the [Evaluation Period] of the Tiering policy.
If wrong, specify the correct value by referring to the following information and then try again.
When the unit of the Evaluation Period is "Hour", 2, 4, 6, 8, or 12 can be specified.
When the unit of the Evaluation Period is "Day", a value within the range of 1 through 31 can be specified.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
PolicyFileService is internal error occurred.
Explanation
An unexpected error occurred in a Tiering policy service.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Loading tier pool data file ({0}) failed.
Explanation
It failed to read the Tier pool file.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Making backup of tier pool data file ({0}) is failed.
Explanation
If failed to back up the Tier pool file.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tier pool ({0}) was not able to be added to tier pool data file.
Explanation
The Tier pool file could not be added.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tier pool ({0}) was not able to be updated to tier pool data file.
Explanation
It failed to update the target Tier pool file.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tier pool ({0}) was not able to be removed to tier pool data file.
Explanation
It failed to delete the target Tier pool file.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tier pool ({0}) is already existed.
Explanation
The specified Tier pool already exists.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the Tier pool name to take the following actions:
If the Tier pool name is correct:
The same Tier pool name may have been registered on the managed device used in the past. Refer to "esfast tierpool delete (Tier pool deletion command)" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to delete only the target Tier pool information.
Or, the managed device may have been re-registered after it was deleted and its IP address was changed. Refer to "Change IP Address of Target Device" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to change the IP address of the device storing the Tier pool information.
If the Tier pool name is not correct:
Specify the correct Tier pool name and execute again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tier pool ({0}) does not exist.
Explanation
The specified Tier pool does not exist.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the Tiering policy name.
If it is not correct, specify the correct Tiering policy name and try again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Configuration of Sub Pool set to Tier pool ({0}) does not agree with level configuration of tiering policy ({1}).
Explanation
The configuration of sub-pool specified in the Tier pool does not match the level configuration of the Tiering policy.
Parameters
{0} : Tier pool name
{1} : Tiering policy name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the level configuration (two-tier configuration with Low/High, or three-tier configuration with Low/Middle/High) of the Tiering policy to be applied.
After the check, set the sub-pool to be registered in the Tier pool according to the level configuration of the Tiering policy.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
FTSP Number ({1}) does not exist in Tier pool ({0}).
Explanation
There is no Tier sub-pool to update corresponding to this number in the specified Tier pool.
Parameters
{0} : Tier pool name
{1} : Sub-pool number
System Response
The system terminates processing.
System Administrator Corrective Action
Check the sub-pool number in the Tier pool, and specify the correct sub-pool number.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
FTV Quota Share setting ({0}) is wrong.
Explanation
The quota setting of FTV is incorrect.
Parameters
{0} : Specified quota ratio
System Response
The system terminates processing.
System Administrator Corrective Action
Reconfigure so that the quota ratio of each level set to FTV amounts to 100 and try again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
FTV Quota Share setting ({0}) is not corresponding to the sub pool setting of tier pool ({1}).
Explanation
The quota ratio configuration set to FTV does not agree with the level configuration of Tier pool.
Parameters
{0} : Specified quota ratio
{1} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Reconfigure so that the quota ratio of each level set to FTV becomes the same as the sub-pool configuration of Tier pool and try again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
FTV Number(s) ({0}) does not exist.
Explanation
The FTV to which to set quota ratio does not exist.
Parameters
{0} : FTV number
System Response
The system terminates processing.
System Administrator Corrective Action
Check whether the FTV to which to set quota ratio exists in Tier pool.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
FTV Quota Share setting is not allowed in tier pool ({0}).
Explanation
This message is output when the following operation is executed:
Setting quota ratio for the FTV in the single layer Tier pool
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Confirm that the Tier pool is two or more layers.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The groups of tier pool ({0}) is not set at the {1} level.
Explanation
No applicable level to Tier pool is set.
Parameters
{0} : Tier pool name
{1} : Target level
System Response
The system terminates processing.
System Administrator Corrective Action
Check that an output given level is set.
When changing the Tier pool configuration, check whether multiple FTSPs are set to one level.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tier pool ({0}) cannot be managed. ({1})
Explanation
Since something is wrong with the Tier pool configuration, it cannot be registered as a managed Tier pool.
Parameters
{0} : Tier pool name
{1} : Reason that Tier pool cannot be managed
System Response
The system continues processing.
System Administrator Corrective Action
Use the ETERNUS CLI to delete the Tier pool in question and then try the operation again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tier pool ({0}) does not agree with tier pool ({1}) in the storage, in information.
Explanation
There is a difference between the Tier pool information registered by the Web Console and the Tier pool information on the device.
Parameters
{0} : Tier pool name
{1} : Name of FTRP in the storage device
System Response
The system continues processing.
System Administrator Corrective Action
Refer to "Measures to be taken when Configuration of the Tier Pool has been changed with the Managed Devices" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to reload the Tier pool information in the storage device.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Tier pool ({0}) does not exist in the storage. (Pool Number={1})
Explanation
The Tier pool registered from the Web Console does not exist in the storage device.
Parameters
{0} : Tier pool name
{1} : FTRP number
System Response
The Tier pool information is deleted automatically because the FTRP information does not exist in the storage device.
System Administrator Corrective Action
No action is required.
Import tier pool terminated normally.
Explanation
The reloading of Tier pool information in the storage device has completed successfully.
System Response
The system continues processing.
System Administrator Corrective Action
No action is required.
Warning occurred in Import tier pool.({0}={1},{0}={1},...)
Explanation
Reloading Tier pools failed with respect to some of the Tier pools.
Parameters
{0} : Name of the FTRP in which a problem was occurred
{1} : Error message code
System Response
The system continues processing.
System Administrator Corrective Action
Access the target device to see the error message code output to FTRP of the device where error occurred and remove the error cause for FTRP and then try the operation again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Error occurred with Import tier pool. ({0}={1},{0}={1},...)
Explanation
The reloading of Tier pool information has terminated abnormally.
Parameters
{0} : Name of the FTRP in which a problem was occurred
{1} : Error message code
System Response
The system continues processing.
System Administrator Corrective Action
Access the target device to see the error message code output to FTRP of the device where error occurred and remove the error cause for FTRP and then try the operation again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The Automated storage tiering of specified Tier Pool Name ({0}) has already been started.
Explanation
Automated Storage Tiering of the specified Tier pool name is already running,
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the specified Tier pool name.
If wrong, specify the correct Tier pool name and execute again.
The Tier Pool Name ({0}) which did not start was appointed. Please begin the Automated storage tiering.
Explanation
Automated Storage Tiering is not started in the specified Tier pool.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the specified Tier pool name.
If wrong, specify the correct Tier pool name and execute again.
If the Tier pool name is correct, possibly, an operation has been executed that becomes enabled only after starting Automated Storage Tiering. Start Automated Storage Tiering on the overview of Tier pool management, and try again.
The Automated storage tiering information related to Tier Pool Name ({0}) does not exist.
Explanation
There is no Automated Storage Tiering information associated with the Tier pool name.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Invalid Execution Mode ({0}) was specified.
Explanation
The Illegal start mode was specified.
Parameters
{0} : Execution mode
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Invalid start time ({0}) was specified.
Explanation
Illegal start time was specified.
Parameters
{0} : Start time
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Obtaining definition related to specified Tier Pool Name ({0}) failed. Result ({1})
Explanation
A failure occurred in retrieving the definition related to the specified Tier pool name.
Parameters
{0} : Tier pool name
{1} : Result
System Response
The system terminates processing.
System Administrator Corrective Action
On the overview of Tiering policy definition and the overview of Tier pool definition, check whether they contain definitions for the Tiering policy and the Tier pool related to the specified Tier pool name.
If they contain definitions for the Tiering policy and the Tier pool, these definitions may contain a mismatch.
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Specified FTV Number does not exist in relocated volume list. Discontinue volume relocation. Tier Pool Name={0} FTV Number={1} Evaluation Date={2}
Explanation
No volume with the specified number can be found in the relocation list. The volume relocation is discontinued.
Parameters
{0} : Tier pool name
{1} : Volume number
{2} : Evaluation date
System Response
The system terminates processing.
System Administrator Corrective Action
Check the specified volume number, the evaluation date and the relocation status.
The volume number may not be candidate for relocation, the evaluation date may not be recent or the relocation may not be possible.
Check the volume number against the evaluation results, the evaluation date, and the volume relocation status according to the Automated Storage Tiering overview. Then, try again.
Specified FTV Number does not exist in relocated volume list. Discontinue volume clear. Tier Pool Name={0} FTV Number={1} Evaluation Date={2}
Explanation
No volume with the specified number can be found in the relocation list. The volume deletion is discontinued.
Parameters
{0} : Tier pool name
{1} : Volume number
{2} : Evaluation date
System Response
The system terminates processing.
System Administrator Corrective Action
Check the specified volume number, the evaluation date and the relocation status.
The volume number may not be candidate for relocation, the evaluation date may not be recent or the volume may not be possible to delete.
Check the volume number against the evaluation results, the evaluation date, and the volume relocation status according to the Automated Storage Tiering overview. Then, try again.
Abnormality occurred by the operation of the file. CAUSE({0})
Explanation
An error occurred in operating a file.
Parameters
{0} : Cause
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Automated storage tiering method failed. ({0}) CAUSE({1})
Explanation
A function method of the administrative service for Automated Storage Tiering was terminated due to an error.
Parameters
{0} : Function name
{1} : Cause
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to collect the performance data of the device ({0}).
Explanation
Collecting the performance data of the device failed.
Parameters
{0} : IP address of the device
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Extracting performance data for tier pool ({0}) failed.
Explanation
Extracting the performance data of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Aggregating performance data for tier pool ({0}) failed.
Explanation
Aggregating the performance data of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unable to find the performance data of Tier Pool ({0}).
Explanation
There is no performance information file of Tier pool.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
The performance data necessary for the evaluation is being gathered.
When "Hour" is specified in the [Interval] of Tiering policy, check that one hour and more has elapsed since the beginning of Automated Storage Tiering and try again.
When "Day" is specified in the [Interval] of Tiering policy, check that one day and more has elapsed since the beginning of Automated Storage Tiering and try again.
If you still have a problem, refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to delete all the performance data of Tier Pool ({0}).
Explanation
Deleting all performance information of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to evaluate the performance data of Tier Pool ({0}).
Explanation
Evaluating the performance data of Tier Pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Deleting all-tier performances information of tier pool ({0}) failed.
Explanation
Deleting all the performance information of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to get the summary of evaluation of Tier Pool ({0}).
Explanation
Collecting the summary of evaluation of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to get the details of evaluation of Tier Pool ({0}).
Explanation
Collecting the details of evaluation of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to update the relocation status of Tier Pool ({0}).
Explanation
Updating the reallocation status of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to create the history of tiers of Tier Pool ({0}).
Explanation
Creating the history of tiers of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to delete the history of tiers of Tier Pool ({0}).
Explanation
Deleting the history of tiers of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Obtaining all-tier information histories of tier pool ({0}) failed.
Explanation
Collecting all the history of tiers of Tier pool failed.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to initialize the performance management process.
Explanation
Initializing the performance management process failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Definition inconsistency occurred at tier pool ({0}).
Explanation
Inconsistency definition has occurred at Tier pool.
Parameters
{0} : Tier pool name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Unexpected error has occurred.
Explanation
Unexpected error has occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Command terminated normally.
Explanation
The command was successfully executed.
System Response
The command completes processing.
System Administrator Corrective Action
No action is required.
Command canceled.
Explanation
The command was cancelled.
System Response
The command terminates processing.
System Administrator Corrective Action
No action is required.
Failed to execute ({0} {1}).
Explanation
The command could not be executed.
Parameters
{0} : Sub command name
{1} : Operand name
System Response
The command terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
syntax error. detail=command is not specified.
Explanation
The command is not specified. The usage is displayed.
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=command ({0}) is invalid.
Explanation
The incorrect command was specified. The usage is displayed.
Parameters
{0} : Specified command name
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=command ({0}) needs operand.
Explanation
The operand is not specified. The usage is displayed.
Parameters
{0} : Sub command name
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=command ({0} {1}) is invalid.
Explanation
The incorrect operand was specified. The usage is displayed.
Parameters
{0} : Sub command name
{1} : Specified operand name
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=option ({0}) is invalid.
Explanation
The incorrect option was specified. The usage is displayed.
Parameters
{0} : Specified option name
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=option ({0}) is duplicated.
Explanation
The same options are multiple specified. The usage is displayed.
Parameters
{0} : Specified option name
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=option ({0}) is required.
Explanation
The mandatory option is not specified.
Parameters
{0} : Name of the option which must be specified
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=option ({0})'s parameter ({1}) is invalid value.
Explanation
The incorrect option value was specified. The usage is displayed.
Parameters
{0} : Option name
{1} : Specified option value
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=option ({0})'s parameter ({1}) is invalid format.
Explanation
The incorrect format was specified in the option value. The usage is displayed.
Parameters
{0} : Option name
{1} : Specified option value
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=option ({0}) needs parameter.
Explanation
The option value is not specified. The usage is displayed.
Parameters
{0} : Option name
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=option ({0})'s parameter ({1}) is duplicated.
Explanation
The same option value is multiple specified. The usage is displayed.
Parameters
{0} : Option name
{1} : Specified option value
System Response
The command displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=at least one or more option(s) in ({0}) is required.
Explanation
The option which should be specified is insufficient. The usage is displayed.
Parameters
{0} : Name of a group of options of which at least one requires to be specified
System Response
The system displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=only one option in ({0}) is required.
Explanation
The two or more options are specified. The usage is displayed.
Parameters
{0} : Name of a group of options of which only a single one can be specified
System Response
The system displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=option ({0}) parameters must line up in ascending order. value ({1}) is invalid.
Explanation
The option values are not specified in ascending order. The usage is displayed.
Parameters
{0} : Option name or related options name
{1} : Specified option value
System Response
The system displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=option ({0}) cannot have overlapping value ({1}).
Explanation
The specified option value is a duplicate of the different option value. The usage is displayed.
Parameters
{0} : Related options name
{1} : Specified option value
System Response
The system displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
syntax error. detail=input ({0}) is invalid. prefix(-) is necessary for this input.
Explanation
The "-" (hyphen) is not specified in top of the option. The usage is displayed.
Parameters
{0} : Specified option name
System Response
The system displays the usage and terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
Unexpected error has occurred.
Explanation
Unexpected error has occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collect the Troubleshooting information" in the ETERNUS SF Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
