This section describes the upgrade procedure for Storage Cruiser's agent for RHEL5/RHEL6, SUSE Linux Enterprise Server 11.
The upgrade is performed as follows:
Log in to the server as a superuser.
Execute the following command to stop the daemon:
# /opt/FJSVssage/bin/pstorageagt
Execute the following command to confirm that the daemon has stopped:
# /usr/bin/ps -ef | grep FJSVssage
If not stopped, execute the following command to stop it forcibly:
# /usr/bin/kill -9 daemonProcID
Back up the Storage Cruiser's agent settings information. (For SUSE Linux Enterprise Server 11 only)
If customization is not performed on "Correlation.ini Parameter" in the ETERNUS SF Storage Cruiser Operation Guide, backing up is not required.
No. | Settings information to be backed up | File to be backed up |
|---|---|---|
1 | Agent definition file | /etc/opt/FJSVssage/Correlation.ini |
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack (Agent Program and Manual)" for this version into the DVD-ROM drive and mount the DVD-ROM.
In command example below, the device name of the DVD-ROM drive is mounted as /dev/cdrom. The device name for the DVD-ROM drive, however, may be different for your particular device.
# mount /dev/cdrom dvdromMountPointExecute the following command:
# cd dvdromMountPoint/Agent_unix/Storage_Cruiser/Linux
# /bin/sh ./scagtinstall.shThe following message will be displayed. To continue, enter "y". To discontinue, enter "n" or "q".
ETERNUS SF Storage Cruiser 15.3 Copyright FUJITSU LIMITED 2012-2013 This program will upgrade "ETERNUS SF Storage Cruiser" Agent on your system. Do you want to continue the upgrade of this package? [y,n,?,q]
If "y" was entered in step 7, the upgrade will continue.
If the upgrade completes normally, the following message will be displayed.
INFO : Starting Upgrade of ETERNUS SF Storage Cruiser ... ... INFO : Upgrade of <FJSVssage> was successful. INFO : ETERNUS SF Storage Cruiser Agent was upgraded successfully.
If there is an error during the upgrade, the following message will be displayed.
ERROR : not privileged or INFO : Upgrade is terminated. or ERROR : Upgrading FJSVssage was failed.
Eject the DVD-ROM.
Execute the following command to start the daemon:
# /opt/FJSVssage/bin/sstorageagt
Reload the server information using the Web Console.
See
Refer to "Reload the server configuration information" in the ETERNUS SF Web Console Guide for this version for information on reloading server information.
The upgrade of Storage Cruiser's agent for SUSE Linux Enterprise Server 11, RHEL5/RHEL6 is completed.
Point
If a failure occurs during the upgrade, you cannot restore the environment to the pre-installation status (rollback). Therefore, it is recommended to back up the operating system before performing the upgrade.
If a failure occurs during the upgrade and you want to restore the environment to the pre-installation status, restore the system from the backup.
If the upgrade was terminated abnormally, refer to "Corrective actions to be taken when any error occurs in version upgrade from 15.x (for Solaris, Linux)" in the Software Release Guide, recover the system to the normal status.
See
If you want to change the IP address after upgrading, refer to "Changing the IP address of a server node (host)" in "[Linux Version] Maintenance of Agent" in the ETERNUS SF Storage Cruiser Operation Guide.