Chapter 16 Messages of swstf prefix

swstf2001

The AdvancedCopy Manager registry could not be accessed.

Explanation

Access to the registry of AdvancedCopy Manager failed.

System action

The system terminates processing.

System administrator response

Check the existence of the following files.

For Solaris or Linux:
- For non-clustered systems:
  /etc/opt/swstorage/swstg.ini
- For clustered systems:
  /etc/opt/swstorage/logicalNodeName/swstg.ini
For Windows:
- For non-clustered systems:
  envDir\etc\swstg.ini
- For clustered systems:
  sharedDrive:\etc\opt\swstorage\etc\swstg.ini

In the case other than above, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2002

There was a memory shortage.

Explanation

A memory shortage occurred.

System action

The system terminates processing.

System administrator response

Check how much space is available in memory. If there is insufficient free space, increase the amount of memory.

swstf2004

The repository could not be accessed. (SQL error)

Explanation

Access to the repository ended in failure.

System action

The system terminates processing.

System administrator response

Refer to the following manual and take appropriate action, then re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

If you still have a problem, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2005

The repository could not be accessed.

Explanation

It failed to access the repository.

System action

The system terminates processing.

System administrator response

Refer to the following manual and take appropriate action, then re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2007

The repository could not be accessed (a transaction start error).

Explanation

The repository is not activated, or access to the repository has failed.

System action

The system terminates processing.

System administrator response

If the repository is not active, refer to the following manual and start RDB daemon (or service).

For Solaris or Linux:
"Starting and Stopping the RDB Daemon" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows:
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

If the services are already active, refer to the following manual and take appropriate action, then re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2008

The repository could not be accessed. (transaction finishing error)

Explanation

It failed to access the repository.

System action

The system terminates processing.

System administrator response

Refer to the following manual and take appropriate action, then re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2101

An internal inconsistency error occurred in Configuration Management. (code1, code2)

Explanation

An internal inconsistency occurred in the configuration management.

Parameters

code1 : Internal code 1
code2 : Internal code 2

System action

The system terminates processing.

System administrator response

If this error occurred when collecting or reflecting information for a specified device, perform the following action to check if the device for which addition is instructed has already been registered.
If the device is already registered, the addition instruction need not be executed.

Action using command:
Execute the stgxfwcmdispdev command. Refer to "stgxfwcmdispdev (Device information display command)" in the ETERNUS SF AdvancedCopy Manager Operation Guide for information on the command.
Action using the Web Console:
1. On the global navigation tab, click Server.
  The registered servers are displayed on the Main pane.
2. On the Main pane, check the target server checkbox.
3. On the Category pane, click Device.
  The device list is displayed on the Main pane.

If the above did not cause the error, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2102

The repository did not start.

Explanation

The repository has not been activated.

System action

The system terminates processing.

System administrator response

Refer to the following manual and start RDB daemon (or service).

For Solaris or Linux:
"Starting and Stopping the RDB Daemon" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows:
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2103

The repository could not be accessed (sqlState).

Explanation

Access to the repository ended in failure.

Parameters

sqlState : SQLSTATE

System action

The system terminates processing.

System administrator response

Refer to the following manual and take appropriate action, then re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2104

Maximum number of connections to repository exceeded. code

Explanation

The number of connections to the repository exceeds the limit.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Wait a few minutes and then re-execute processing.

If you still have a problem, refer to the following manual and take appropriate action. Then, re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2107

The Storage Server Data is inconsistent.

Explanation

The information in the repository is inconsistent.

System action

The system terminates processing.

System administrator response

Collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2108

AdvancedCopy Manager registry could not be accessed.

Explanation

It failed to access the registry.

System action

The system terminates processing.

System administrator response

Check the existence of the following files.

For Solaris or Linux:
- For non-clustered systems:
  /etc/opt/swstorage/swstg.ini
- For clustered systems:
  /etc/opt/swstorage/logicalNodeName/swstg.ini
For Windows:
- For non-clustered systems:
  envDir\etc\swstg.ini.
- For clustered systems:
  sharedDrive:\etc\opt\swstorage\etc\swstg.ini

swstf2109

Storage Management Server unable to delete server.

Explanation

The Management Server information cannot be deleted.

System action

The system terminates processing.

System administrator response

No response is required.

swstf2110

Server data inaccessible.

Explanation

The Managed Server failed to obtain the server information.

System action

The system terminates processing.

System administrator response

Check the state on the Managed Server side.

swstf2111

Connection to Storage Server failed.

Explanation

Connection to the Managed Server ended in failure.

System action

The system terminates processing.

System administrator response

Check that the Managed Server communication daemon or communication service has been started.
If started, check that the port number is correct.
Note that the cause of this message may be the network environment settings.
In particular, check that the network settings do not prevent communication with the Managed Server. For example, check that unnecessary port filtering settings are not set by the firewall.
Refer to "Port number setting" in "Setup of AdvancedCopy Manager's agent" in the ETERNUS SF Installation and Setup Guide for the port numbers required in order to communicate with Managed Servers.
Check whether the IP address has changed. If the IP address has changed, change the IP address being managed by AdvancedCopy Manager. Refer to "Changing the Operating Environment" in the ETERNUS SF AdvancedCopy Manager Operation Guide for information on change methods.

swstf2112

Library could not be accessed.

Explanation

An error occurred while reading the library used for configuration management.

System action

The system terminates processing.

System administrator response

swstf2113

Code conversion error occurred.

Explanation

An error occurred during the code conversion. Unsupported code is included.

System action

The system terminates processing.

System administrator response

If this message appears when a server is added:
Change the server name and register it again.
If it is output when device information is being registered:
The mount-point name includes an unauthorized code. Change the mount-point name.

swstf2114

Storage Server unmanageable.

Explanation

The specified Managed Server cannot be managed. An attempt was made to register the Managed Server whose version is later than that of the Management Server.

System action

The system terminates processing.

System administrator response

Upgrade the Management Server.

swstf2115

Server cannot be modified.

Explanation

The server information was not updated; one of the following modification attempts failed:

Downgrading the Managed Server.
Modifying a server defined as a Management Server to a Managed Server.
Modifying a server defined as a Managed Server to a Management Server.

System action

The system terminates processing.

System administrator response

Correct the cause and try again.

swstf2116

Specified device does not exist.

Explanation

The device selected for update of the specific device is not subject to management.

System action

The system terminates processing.

System administrator response

Check the latest information, and then re-execute by specifying the existence device.

swstf2117

Specified server does not exist.

Explanation

The specified server is not subject to management.

System action

The system terminates processing.

System administrator response

Check the latest information, and then re-execute by specifying the existence device.

swstf2118

Server data in Storage Server could not be modified.

Explanation

Update of server information ended in failure when a server was added, deleted, or updated. Possible causes are listed below:

The communication daemon running on the Managed Server has not been activated.
An invalid IP address or port number was specified when adding or updating the server.

System action

The system terminates processing.

System administrator response

Correct the cause and try again.

swstf2119

The IP address already exists.

Explanation

The same IP address is already registered.

System action

The system terminates processing.

System administrator response

Check the latest server information.

swstf2120

Server already exists.

Explanation

The same server name is already registered.

System action

The system terminates processing.

System administrator response

Change the server name and try again.

swstf2121

Device Data unobtainable.

Explanation

The Managed Server failed to obtain the device information.

System action

The system terminates processing.

System administrator response

Check the status on the Managed Server side.

Check whether the Managed Server daemon or service is activated.

If the Managed Server daemon or service is activated, then refer to "A.5 Detail error messages of device information acquisition", and make sure that no error has occurred during acquisition of device information.

swstf2122

Memory is insufficient.

Explanation

There is insufficient free space in memory.

System action

The system terminates processing.

System administrator response

Check how much space is available in memory. If there is insufficient free space, install more memory.

swstf2123

Storage Server unmanageable. This is because the hostname includes an unsupported character.

Explanation

The target server cannot be managed because the host name of the target server includes an unsupported character (ie, a character other than one-byte alphanumeric characters, -, _, #, or .) or it does not begin with a one-byte alphanumeric character.

System action

The system terminates processing.

System administrator response

If this error occurs when the Management Server is being registered (DB setup):
Change the OS host name and re-execute.
If this error occurs when the Managed Server is being registered:
When the host name is used as the server name, change the OS host name and then re-execute.
When a name that is different from the host name can be used as the server name, specify the different name and re-execute.

swstf2124

Another Storage Management Server cannot be managed.

Explanation

An attempt was made to manage a Management Server, but there can be only one Management Server in the system.

System action

The system terminates processing.

System administrator response

Check whether the IP addresses or port numbers for the Management Server or Management Server transaction were specified by mistake when a server was added.

Management Servers and Management Server transaction are registered during Management Server customization and the cluster setup for Management Server transaction, and so there is no need to register them again.

Additionally, if a new machine is operated as a Management Server, it cannot be registered as a Management Server in the same management system.

swstf2401

AdvancedCopy Manager registry updated.

Explanation

The registry of the Management Server has been updated normally.

System action

The system completes processing.

System administrator response

No response is required.

swstf2402

usage:stgcmmodnode [-i IP-Address] [-n Server-Name] [-p Port-Number]

Explanation

The command was used incorrectly.

System action

The system terminates processing.

System administrator response

Confirm the correct usage of the command and try again.

swstf2403

User is a non root user.

Explanation

For Solaris, Linux, HP-UX, or AIX:
The command was executed by a user other than the root user.
For Windows:
The command was executed by a user other than Administrators group of member.

System action

The system terminates processing.

System administrator response

For Solaris, Linux, HP-UX, or AIX:
Please perform as the root user.
For Windows:
Please perform as a user who belongs to an Administrators group.

swstf2404

Storage Server Type unobtainable.

Explanation

The server type could not be obtained.

System action

The system terminates processing.

System administrator response

For clustered systems, check that the command is executed with the environment variable SWSTGNODE set correctly. For non-clustered systems, check that the command is not executed in the incorrect state, that is, with the environment variable SWSTGNODE set. If the setting is incorrect, correct the setting, then re-execute.

For clustered systems, check that the cluster service or cluster group to which the targeted AdvancedCopy Manager transaction belongs is being executed at an active node.

If the transaction is being executed at an inactive node, re-execute at an active node.

If the above does not apply, check that the following files exist:

For Solaris, Linux, HP-UX, or AIX:
- For non-clustered systems:
  /etc/opt/swstorage/swstg.ini
- For clustered systems:
  /etc/opt/swstorage/logicalNodeName/swstg.ini
For Windows:
- For non-clustered systems:
  envDir\etc\swstg.ini
- For clustered systems:
  sharedDrive:\etc\opt\swstorage\etc\swstg.ini

In all other cases, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2405

Storage Management Server unable to modify server name with this command.

Explanation

The Management Server cannot modify the server name with the Management Server information change command.

System action

The system terminates processing.

System administrator response

Specify the IP address or port number and then execute the command.

To change the server name of Management Server, use the Server information change command.

swstf2406

AdvancedCopy Manager registry does not exist.

Explanation

The registry of AdvancedCopy Manager does not exist.

System action

The system terminates processing.

System administrator response

If the setting is incorrect, correct the setting, then re-execute.

For clustered systems, check that the cluster service or cluster group to which the targeted AdvancedCopy Manager transaction belongs is being executed at an active node.

If being executed at an inactive node, re-execute at an active node.

If the above does not apply, check that the following files exist:

For Solaris, Linux, HP-UX, or AIX:
- For non-clustered systems:
  /etc/opt/swstorage/swstg.ini
- For clustered systems:
  /etc/opt/swstorage/logicalNodeName/swstg.ini
For Windows:
- For non-clustered systems:
  envDir\etc\swstg.ini
- For clustered systems:
  sharedDrive:\etc\opt\swstorage\etc\swstg.ini

swstf2407

Storage Management Server IP Address is incorrect.

Explanation

The format of the specified IP address is not correct.

System action

The system terminates processing.

System administrator response

Check the IP address and then execute this command again.

swstf2408

Storage Management Server PORT Number is incorrect.

Explanation

The format of the specified port number is not correct.

System action

The system terminates processing.

System administrator response

Check the port number and then execute the command again.

swstf2409

Storage Management Server Name is incorrect.

Explanation

The specified server name is not correct.

System action

The system terminates processing.

System administrator response

Check the server name and then execute the command again.

swstf2410

A conversion error occurred.

Explanation

It failed to convert the server name.

System action

The system terminates processing.

System administrator response

swstf2411

AdvancedCopy Manager registry could not be accessed. (write error)

Explanation

It failed to write to the AdvancedCopy Manager registry.

System action

The system terminates processing.

System administrator response

swstf2412

AdvancedCopy Manager registry could not be accessed. (read error)

Explanation

Reading of the AdvancedCopy Manager registry ended in failure.

System action

The system terminates processing.

System administrator response

swstf2413

type = data

Explanation

Server information is displayed.

Parameters

type : Information type. The displayed strings and explanation are as follows:

Displayed Strings	Explanation
IP Address	IP address of the Management Server
PORT Number	Port number of the Management Server
Storage Management Server's Name	Name of the Management Server

data : Data managed in the AdvancedCopy Manager registry

System action

The system completes processing.

System administrator response

No response is required.

swstf2415

Storage Management Server repository updated.

Explanation

The Management Server repository has been updated normally.

System action

The system completes processing.

System administrator response

No response is required.

swstf2416

AdvancedCopy Manager registry could not be obtained.

Explanation

Information on the Management Server could not be obtained from the registry.

System action

The system terminates processing.

System administrator response

swstf2417

A fork error occurred.

Explanation

An error occurred at the fork function.

System action

The system terminates processing.

System administrator response

Wait for a while and then execute the command again.

If the same error occurs again, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2431

Maximum number of connections to repository exceeded.

Explanation

The number of connections to the repository exceeds the limit.

System action

The system terminates processing.

System administrator response

Wait for a while and then execute the command again.

swstf2432

Repository could not be accessed. (sqlState)

Explanation

It failed to access the repository.

Parameters

sqlState : SQLSTATE

System action

The system terminates processing.

System administrator response

Refer to the following manual and start RDB daemon (or service).

For Solaris or Linux:
"Starting and Stopping the RDB Daemon" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows:
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2433

The repository did not start.

Explanation

The repository is not activated.

System action

The system terminates processing.

System administrator response

Refer to the following manual and take appropriate action, then re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2434

Memory is insufficient.

Explanation

A memory shortfall occurred.

System action

The system terminates processing.

System administrator response

Check how much space is available in memory. If there is insufficient free space, increase the amount of memory.

swstf2435

IP Address already exists.

Explanation

The IP address already exists.

System action

The system terminates processing.

System administrator response

Check the IP address and then execute the command again.

swstf2436

The error by the following causes occurred.

Explanation

Processing cannot be executed because of an error whose cause is described below.

System action

The system terminates processing.

System administrator response

Take appropriate action according to the last message displayed to eliminate the cause, and re-execute the processing.

swstf2437

Library could not be accessed.

Explanation

An error occurred during reading of the library used for configuration management.

System action

The system terminates processing.

System administrator response

swstf2451

The change instruction file could not be read. Filename=fileName

Explanation

Reading failed for the specified change instruction file.

Parameters

fileName : File name

System action

The system terminates processing.

System administrator response

Specify an existing file, and re-execute.

swstf2452

The format of the change instruction file is not correct. Line=lineNumber

Explanation

The change instruction file contains a formatting error.

Parameters

lineNumber : Line number

System action

The system terminates processing.

System administrator response

Correct the format of the change instruction file content, and re-execute.

swstf2453

Two or more lines of the same information division into the same server exist. Server name=serverName, Information=class

Explanation

The change instruction file contains a line with a change instruction that already exists in the same information class for the same server.

Parameters

serverName : Server name
class : Information class (I, P or S)

System action

The system terminates processing.

System administrator response

Correct the content of the change instruction file, and re-execute.

swstf2454

Two or more lines of the same value exist. Information=class, Value=value

Explanation

The change instruction file contains two or more lines with the same value for the same information class.

Parameters

class : Information class (I, P or S)
value : Change instruction value

System action

The system terminates processing.

System administrator response

Correct the content of the change instruction file, and re-execute.

swstf2455

The specified server does not exist. Server name=serverName

Explanation

The server name specified in the change instruction file does not exist.

Parameters

serverName : Server name

System action

The system terminates processing.

System administrator response

Correct the content of the change instruction file, and re-execute.

swstf2456

The specified value has already been set. Information=class, Value=value

Explanation

The change instruction file specifies a value that has already been set.

Parameters

class : Information class (I, P or S)
value : Change instruction value

System action

The system terminates processing.

System administrator response

A value that has already been set cannot be specified again in the change instruction server name and IP address. Correct the content of the change instruction file, and re-execute.

swstf2457

The change of the server caused a failure. Server name=serverName, Reason=reason

Explanation

An error occurred during server change processing.

Parameters

serverName : Server name
reason : Reason

System action

The system terminates processing.

System administrator response

Refer to [System administrator response] for the message shown in reason and take the indicated action, then re-execute.

If the -y option was specified, the following actions are required at the server that issued the error after the problem has been resolved at that server:

For change instructions related to targeted server information in the change specification file, use the server information batch change function to re-execute change processing for the targeted server.
For change instructions related to Management Server information, execute the stgcmmodnode command at the targeted server. If inter-server replication operations are performed between the targeted server and the Management Server, execute the swsrprecoverres command at the targeted server.

swstf2458

The resource adjustment command was terminated abnormally. Server name=serverName, Error=errCode, Detail=detail

Explanation

The executed resource adjustment command terminated abnormally.

Parameters

serverName : Server name
errCode : Error code
detail : Detail code

System action

The system terminates processing.

System administrator response

If errCode is 4 or 8, communication with the targeted server failed. Check the environment settings at the targeted server, and check if an error has occurred at the communication destination device.

If errCode is 12, the command terminated abnormally at the targeted server. Take the action indicated in the message that is posted after this message.

Then, execute the swsrprecoverres command with the -r option specified at all servers where replication management operations are performed, including the server that issued the error. Note that, if the -y option is specified, execute this command only at the server where the problem occurred. Refer to "swsrprecoverres (Resource adjustment command)" in the ETERNUS SF AdvancedCopy Manager Operation Guide for information on the command.

swstf2459

The specified value is not correct. Line=lineNumber

Explanation

The specified change value in the change instruction file is not correct.

Parameters

lineNumber : Line number

System action

The system terminates processing.

System administrator response

Refer to the message displayed immediately after this message and correct the content of the change instruction file, and re-execute

swstf2499

An internal inconsistency occurred.

Explanation

An internal inconsistency occurred.

System action

The system terminates processing.

System administrator response

swstf2503

The AdvancedCopy Manager port number is not set.

Explanation

The port number and/or protocol name of stgxfws is not correctly specified in the following file.

For Solaris or Linux:
/etc/services
For Windows:
%SystemRoot%\system32\drivers\etc\services

System action

The system terminates processing.

System administrator response

Refer to "Configuring the network environment" in "Setup of AdvancedCopy Manager's manager" in the ETERNUS SF Installation and Setup Guide, and then specify the correct port number and/or protocol name.

swstf2505

Unable to find pathName.

Explanation

The path to the AdvancedCopy Manager definition file cannot be found.

Parameters

pathName : Path name

System action

The system terminates processing.

System administrator response

Check whether the device with this path is mounted.

swstf2506

An internal inconsistency occurred. error = code

Explanation

An internal inconsistency occurred while adding a server to the Management Server.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf2508

A memory shortage occurred.

Explanation

A memory shortfall occurred.

System action

The system terminates processing.

System administrator response

Check how much space is available in memory. If there is insufficient free space, increase the amount of memory.

swstf2510

AdvancedCopy Manager registry could not be accessed.

Explanation

It failed to access the registry.

System action

The system terminates processing.

System administrator response

Check the existence of the following files.

For Solaris or Linux:
- For non-clustered systems:
  /etc/opt/swstorage/swstg.ini
- For clustered systems:
  /etc/opt/swstorage/logicalNodeName/swstg.ini
For Windows:
- For non-clustered systems:
  envDir\etc\swstg.ini.
- For clustered systems:
  sharedDrive:\etc\opt\swstorage\etc\swstg.ini

swstf2512

AdvancedCopy Manager registry could not be accessed.

Explanation

It failed to access the registry.

System action

The system terminates processing.

System administrator response

Check the existence of the following files.

For Solaris or Linux:
- For non-clustered systems:
  /etc/opt/swstorage/swstg.ini
- For clustered systems:
  /etc/opt/swstorage/logicalNodeName/swstg.ini
For Windows:
- For non-clustered systems:
  envDir\etc\swstg.ini.
- For clustered systems:
  sharedDrive:\etc\opt\swstorage\etc\swstg.ini

swstf2513

An internal inconsistency occurred. return-code = code

Explanation

An internal inconsistency occurred while adding a server to the Management Server.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf2800

Unregistered user name. Enter a user name registered in the OS.

Explanation

The specified user name is not registered with the OS.

System action

The system terminates processing.

System administrator response

Re-execute by specifying a user name registered with the OS.

swstf2801

Incorrect password. Enter the Correct password corresponding to the user name registered in the OS

Explanation

The password specified for the user name is invalid.

System action

The system terminates processing.

System administrator response

Specify a valid password for the specified user name, and re-execute.

swstf2802

System error

Explanation

An error occurred during processing.

System action

The system terminates processing.

System administrator response

On Windows Server 2008 or later, if a command prompt is opened without specifying Run as administrator, this error may be output by executing the stgforcedelsrv command. Reopen a command prompt with specifying Run as administrator, and then execute the stgforcedelsrv command again.

swstf2803

Temporary file cannot be created.

Explanation

A temporary file could not be created.

System action

The system terminates processing.

System administrator response

Ensure that the drive containing the program directory specified during installation has enough free space.

swstf2804

AdvancedCopy Manager registry file cannot be updated.

Explanation

An error occurred during the updating of the AdvancedCopy Manager registry file.

System action

The system terminates processing.

System administrator response

If cluster operations are used for Management Server transactions, check if the cluster service or cluster group to which the Management Server transaction belongs is being executed at an active node.

If being executed at an inactive node, re-execute at an active node.

Check the existence of the following files.

For Solaris or Linux:
- For non-clustered systems:
  /etc/opt/swstorage/swstg.ini
- For clustered systems:
  /etc/opt/swstorage/logicalNodeName/swstg.ini
For Windows:
- For non-clustered systems:
  envDir\etc\swstg.ini
- For clustered systems:
  sharedDrive:\etc\opt\swstorage\etc\swstg.ini

Also, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf2805

Memory shortage occurred.

Explanation

A memory shortage occurred.

System action

The system terminates processing.

System administrator response

Perform the following so that a virtual memory area can be allocated, and re-execute processing.

Increase the paging file size.
Terminate other applications.

swstf2806

The username or the password exceeds 18 bytes.

Explanation

The specified username or password exceeds 18 bytes.

System action

The system terminates processing.

System administrator response

Specify a username and password that are 18 bytes or less.

swstf2901

The package for the SDX object is not installed.

Explanation

The command cannot be executed because the package necessary to use of the SDX object is not installed.

System action

The system terminates processing.

System administrator response

Before executing the command for setting, install the SDX-object-related package (FJSVsdx).

swstf2902

The -volume option cannot be specified in this environment.

Explanation

The -volume option cannot be specified in the version of the installed SDX-object-related package.

System action

The system terminates processing.

System administrator response

To specify the -volume option for operation based on a logical volume, install the necessary version of the SDX-object-related package in advance.
Refer to "Operating Environment of AdvancedCopy Manager" in the ETERNUS SF AdvancedCopy Manager Operation Guide (for Solaris or Linux) for the necessary version.

swstf2903

AdvancedCopy Manager registry could not be accessed. (read error, SWSTGNODE=value)

Explanation

Reading the AdvancedCopy Manager registry failed.

Parameters

value : Logical node name specified in the environment variable SWSTGNODE at the time of command execution (the default is null.)

System action

The system terminates processing.

System administrator response

If device information has not been obtained or displayed although the stgxfwcmsetsdx command has been executed, obtain or display the information, and re-execute processing.

Check the value displayed in the message content. For clustered systems, check if the operation was executed with the environment variable SWSTGNODE set correctly. For non-clustered systems, check if the operation was executed with the incorrect environment variable SWSTGNODE setting.

If the setting is incorrect, correct the setting, then re-execute.

For clustered systems, check that the cluster service or cluster group to which the targeted AdvancedCopy Manager transaction belongs is being executed at an active node.

If being executed at an inactive node, re-execute at an active node.

If it has been obtained and displayed, confirm that the following files exist:

For Solaris or Linux:
- For non-clustered systems:
  /etc/opt/swstorage/swstg.ini
- For clustered systems:
  /etc/opt/swstorage/logicalNodeName/swstg.ini

In other cases, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide (for Solaris or Linux)

swstf2904

AdvancedCopy Manager registry could not be accessed. (write error, SWSTGNODE=value)

Explanation

Writing data to the AdvancedCopy Manager registry failed.

Parameters

value : Logical node name specified in the environment variable SWSTGNODE at the time of command execution (the default is null.)

System action

The system terminates processing.

System administrator response

If the setting is incorrect, correct the setting, then re-execute.

For clustered systems, check that the cluster service or cluster group to which the targeted AdvancedCopy Manager transaction belongs is being executed at an active node.

If being executed at an inactive node, re-execute at an active node.

Confirm that the following files exist:

For Solaris or Linux:
- For non-clustered systems:
  /etc/opt/swstorage/swstg.ini
- For clustered systems:
  /etc/opt/swstorage/logicalNodeName/swstg.ini

swstf2905

Process creation failed. code

Explanation

Generating a new process failed.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf2909

An internal inconsistency occurred. code

Explanation

An internal inconsistency occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf2913

This command cannot be run in this environment.

Explanation

This command cannot be run because it is not supported by the OS.

System action

The system terminates processing.

System administrator response

If the Managed Server is HP-UX 11i v2 or earlier, the stgxfwcmsetmode command need not be used.

swstf2915

The legacy special device files are not existing.

Explanation

If HP-UX is used as the Managed Server, the "-leg on" option cannot be specified because legacy devices (/dev/(r)dsk/c#t#d#) do not exist in the Managed Server.

System action

The system terminates processing.

System administrator response

Check the devices that exist in the Managed Server.

If operating with legacy devices, set legacy devices on the Managed Server. For setup procedures, refer to the OS documentation.

swstf2920

Unregistered user name(userName).

Explanation

The user name is not registered in the operating system.

Parameters

userName : Name of user who is not registered in the operating system

System action

The system terminates processing.

System administrator response

If "esfuser" is shown in userName, refer to "Registering the repository access user (for Solaris and Linux environments)" in the ETERNUS SF Installation and Setup Guide, register the user name and re-execute processing.

swstf2921

The password of user name(userName) is not correct.

Explanation

The password for the user is incorrect.

Parameters

userName : Name of user whose password is incorrect

System action

The system terminates processing.

System administrator response

Specify a correct password for the user shown in userName, and then re-execute processing.

swstf3000

The server which performs package backup of the management information on AdvancedCopy Manager was registered.

Explanation

The server used to execute package backup of the management information of AdvancedCopy Manager was registered.

System action

The system completes processing.

System administrator response

No response is required.

swstf3001

The server which performs package backup of the management information on AdvancedCopy Manager was deleted. Delete a directory. Directory=dirName

Explanation

The server used to execute package backup of the management information of AdvancedCopy Manager was deleted.

Parameters

dirName : Absolute path to the directory

System action

The system completes processing.

System administrator response

Delete the output directory as necessary.

swstf3002

usage: stgmgrinfoset [-del | -d Directory-name -c Manager-code]

Explanation

An incorrect option is specified.

System action

The system terminates processing.

System administrator response

Confirm the correct usage of the command, and re-execute the command.

swstf3003

It is not registered as a Storage Server.

Explanation

The server is not registered as the Managed Server.

System action

The system terminates processing.

System administrator response

Confirm that the server is registered as the Managed Server.

For clustered systems, confirm that the correct logical node name is set in the environment variable SWSTGNODE.

swstf3004

The error occurred in file access.

Explanation

Accessing the file failed.

System action

The system terminates processing.

System administrator response

swstf3005

An execution server is already registered.

Explanation

The server is already registered as the server used to execute the stgmgrinfobkup command.

System action

The system terminates processing.

System administrator response

No response is required.

swstf3006

An error is in the specified directory name.

Explanation

The specified directory name is incorrect.

System action

The system terminates processing.

System administrator response

Check the specified directory name.

If there are files or directories under the directory specified by -a option of the stgforcedelsrv command, this error is output.
Specify an empty directory for an operand of -a option.

If multiple stgforcedelsrv commands with specifying the same directory for a operand of -a option are executed at the same time, this error may be output.
Confirm that the stgforcedelsrv command is not executed, and re-execute the command.

swstf3007

The specified directory does not exist.

Explanation

The specified directory does not exist.

System action

The system terminates processing.

System administrator response

Confirm that the directory specified in the parameter is correct, and that it does exist.

swstf3008

It is not registered as an execution server.

Explanation

The server is not registered as the server used to execute the stgmgrinfobkup command.

System action

The system terminates processing.

System administrator response

Confirm that the server is the server used to execute the stgmgrinfobkup command.

For clustered systems, confirm that the correct logical node name is set in the environment variable SWSTGNODE.

swstf3009

There is no file for backup. Backup type=type

Explanation

A file to be backed up does not exist.

Parameters

type : Backup type

System action

The system terminates processing.

System administrator response

Check whether database is backed up for the Managed Server.

Check whether the policy file for package backup of the management information is backed up for a server other than the server used to execute the stgmgrinfobkup command.

swstf3010

usage: stgmgrinfobkup [-n Server-name] [-t Backup-type]

Explanation

An incorrect option is specified.

System action

The system terminates processing.

System administrator response

Confirm the correct usage of the command, and re-execute the command.

swstf3011

The error occurred in code conversion.

Explanation

Converting of codes has failed.

System action

The system terminates processing.

System administrator response

swstf3012

Memory is insufficient.

Explanation

A memory shortage occurred.

System action

The system terminates processing.

System administrator response

Check the available space in memory. If memory is insufficient, increase the amount of memory.

swstf3013

A Server Information item could not be acquired. Error=errCode

Explanation

Obtaining the server information failed.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

Refer to "B.2 Error codes for configuration management", take action according to the instructions for the error code, and re-execute processing.

swstf3014

Backup of management information is started. Start time=time, Server name=serverName

Explanation

The backup of the management information has started.

Parameters

time : Start date
serverName : Server name

System action

The system continues processing.

System administrator response

No response is required.

swstf3015

It is the outside for support.

Explanation

This is not supported.

System action

The system executes the next server processing.

System administrator response

Check the version and OS type of the target server.

The name of the target server can be checked in the previous swstf3014 message that was output.

swstf3016

A policy file does not exist.

Explanation

No policy file exists.

System action

The system terminates processing.

System administrator response

Check the policy file.

swstf3017

Data was unacquirable from the policy file.

Explanation

No data can be obtained from the policy file.

System action

The system executes the next server processing.

System administrator response

Check the setting status of the policy file in the target server.

The name of the target server can be checked in the previous swstf3014 message that was output.

swstf3018

The error occurred in creation or deletion of a backup directory.

Explanation

Creating or deleting a backup directory failed.

System action

The system terminates processing.

System administrator response

swstf3019

The error occurred in processing between servers. Error code=errCode, Detailed code=detail

Explanation

An error occurred during processing between servers.

Parameters

errCode : Error code
detail : Detail code

System action

The system terminates processing.

System administrator response

If the stgmgrinfobkup command execution result is one of the following in the environment for which the Managed Server is using the IPv4 and IPv6 addresses, register the Management Server as "package-backup-of-the-management information execution server" and then execute the stgmgrinfobkup command again.

errCode=12, detail=0
errCode=4, detail=12

If errCode is 4 or 8, refer to "B.1 Error codes for communication service/daemon", take action according to the instructions for the detail, and re-execute the processing. The "request send destination server" is the server indicated in the previous swstf3014 message that was output.

If errCode is 8, the detailed code is 182, and the stgxfws0213 message is output to the system log of the request send destination server, verify the code of the Management Server specified by the stgmgrinfoset command.

If errCode is 12, the command on the target server ends because of an error. Refer to one of the following log files, take action according to the output message in the log file, and re-execute the command. The target server name can be checked in the previous swstf3014 message that was output.

The target server performs a non-cluster or local task in Windows:
workDir\var\stgmgrinfo.log
The target server performs a cluster task in Windows:
sharedDrive:\var\opt\swstorage\var\stgmgrinfo.log
The target server performs a non-cluster or a local task in Solaris, HP-UX, AIX, or Linux:
/var/opt/FJSVswstf/stgmgrinfo.log
The target server performs a cluster task in Solaris, HP-UX, or Linux:
/var/opt/FJSVswstf/logicalNodeName/stgmgrinfo.log

swstf3020

Backup of management information was ended normally. End time=time, Server name=serverName

Explanation

Backing up the management information is completed successfully.

Parameters

time : End date
serverName : Server name

System action

The system continues processing.

System administrator response

No response is required.

swstf3021

The normal end of the backup of management information was carried out by all servers.

Explanation

Backing up the management information is completed successfully on all servers.

System action

The system completes processing.

System administrator response

No response is required.

swstf3022

The error end of the backup of management information was carried out by some servers.

Explanation

Backing up the management information was aborted because of an error on some servers.

System action

The system terminates processing.

System administrator response

Check the output results of the command, and execute backup of the servers where backup was aborted.

swstf3023

Internal error occurred.

Explanation

An internal inconsistency occurred.

System action

The system terminates processing.

System administrator response

swstf3024

Backup of the function besides an object was specified.

Explanation

Backing up of an unsupported function is specified.

System action

The system terminates processing.

System administrator response

Check whether the database is backed up for the Managed Server.

swstf3025

The error occurred in transmission of a backup file. Error code=errCode, Detailed code=detail

Explanation

Transferring the backup file failed.

Parameters

errCode : Error code
detail : Detail code

System action

The system terminates processing.

System administrator response

Refer to "B.1 Error codes for communication service/daemon", take action according to the instructions for the detail, and re-execute processing. The "request send destination server" is the server that executed the stgmgrinfobkup command.

swstf3026

The error occurred in execution of a backup command. Error code=errCode

Explanation

Executing the backup command failed.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

Take action according to the backup command error message output after this message.

If no backup command error message is output after this message, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf3027

The error occurred in the processing which gathers backup data. Error code=errCode

Explanation

Compiling the backup data failed.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

For Windows:
Take action according to the error message output after this message.
For Solaris, Linux, HP-UX, or AIX:
Refer to the error message output after this message, and take appropriate action for the tar command error.

If no error message is output after this message, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf3028

The error occurred in reading of basic information.

Explanation

Reading of basic information failed.

System action

The system terminates processing.

System administrator response

For clustered systems, confirm that the correct logical node name is set in the environment variable SWSTGNODE.
Also, confirm that the node for the target Managed Server transaction (or Management Server transaction) is operating.

swstf3029

usage: stgmgrinfodisp [-n server-name]

Explanation

An incorrect option is specified.

System action

The system terminates processing.

System administrator response

Confirm the correct usage of the command, and re-execute the command.

swstf3030

Backup of management information is not performed once.

Explanation

The management information has never been backed up.

System action

The system terminates processing.

System administrator response

No response is required.

swstf3031

usage: stgarcext input-file-name output-directory-name

Explanation

An incorrect option is specified.

System action

The system terminates processing.

System administrator response

Confirm the correct usage of the command, and re-execute the command.

swstf3032

The specified file or directory does not exist.

Explanation

The specified file or directory does not exist.

System action

The system terminates processing.

System administrator response

Confirm that the file or directory specified in the command exists.

swstf3033

The error occurred in creation or deployment of an archive file.

Explanation

Creating or expanding an archive file has failed.

System action

The system terminates processing.

System administrator response

swstf3034

It is not the archive file created by AdvancedCopy Manager.

Explanation

This is not an archive file created by AdvancedCopy Manager.

System action

The system terminates processing.

System administrator response

Confirm that the archive file is transferred in a mode other than binary mode.

Collect the following data, and contact a Fujitsu system engineer:

Archive file
Refer to following manual and collect the information required for troubleshooting:
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide (for Windows)

swstf3035

The stgarcext command was ended normally.

Explanation

The stgarcext command ended successfully.

System action

The system completes processing.

System administrator response

No response is required.

swstf5001

The RMI registry is inactive. Restart AdvancedCopy Manager.

Explanation

The command cannot be opened because the RMI registry is inactive.

System action

The system terminates processing.

System administrator response

Refer to the following manual and restart the relating daemon/service:

For Solaris or Linux: (Daemon type is "RMI daemon")
"Starting and Stopping Daemons" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows: (Service name is "AdvancedCopy Manager GUI Service")
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

Note that the cause of this message may be the network environment settings.

In particular, check that the network settings do not prevent communication with the Management Server. For example, check that unnecessary port filtering settings are not set by the firewall. In addition, for Solaris and Linux versions check that a local host definition has been set in the hosts file.

Refer to "Configuring the network environment" in "Setup of AdvancedCopy Manager's manager" in the ETERNUS SF Installation and Setup Guide for the port numbers required in order for commands to communicate with Management Server.

swstf5003

Access to the AdvancedCopy Manager definition file failed.

Explanation

The AdvancedCopy Manager definition file could not be accessed.

System action

The system terminates processing.

System administrator response

swstf5011

Server data is not code

Explanation

No server is under management. The repository integration setting may not have finished normally.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Use Updates to Latest Information to update the contents of the screen and check whether the server is displayed.

For Solaris or Linux:
Refer to the last line of the /var/opt/FJSVswstf/log/stgdbset.log file. If it is "The database integration setup terminated abnormally", correct the cause and finish the database integration setup. Then re-execute processing.
For Windows:
Refer to "Database configuration" in the ETERNUS SF AdvancedCopy Manager Operation Guide and execute the setup of the database. Re-execute processing after checking that the setup of the database ends normally.

swstf5012

No data of the specified server is found. code

Explanation

The specified server has been excluded from management, possibly by another user.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Check whether another user excluded the specified server from being managed.

Use Updates to Latest Information to update the contents of the screen and check whether the server is displayed.

swstf5013

An attempt to set up a connection to the repository failed during accessing repository of server data. code

Explanation

A connection to the repository cannot be made because the repository is inactive.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Refer to the following manual and restart the relating daemon/service:

For Solaris or Linux: (Daemon type is " RDB daemon")
"Starting and Stopping Daemons" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows: (Service name is "SymfoWARE RDB RDBSWSTF")
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5014

The maximum allowable number of connections to the repository was exceeded during accessing repository of server data. code

Explanation

While accessing the repository of server data, the number of concurrent connections to the repository exceeded the maximum allowed.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Wait a few minutes and then re-execute processing.

swstf5015

A repository access error occurred during accessing repository of server data. code

Explanation

This is an SQL error that can occur while the repository is being searched for data.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Refer to the following manual and take appropriate action. Then, re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5016

A communication error occurred during accessing repository of server data. code

Explanation

A communication error occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Check whether communication daemon/service of the Management Server starts.

If it starts, check that the port number is correct.
If it does not start, refer to the following manual and restart daemon/service, and re-execute processing:

For Solaris or Linux: (Daemon type is "Communication daemon")
"Starting and Stopping Daemons" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows: (Service name is "AdvancedCopy Manager COM Service")
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5017

A code conversion error occurred during accessing repository of server data. code

Explanation

The file required for code conversion is not found or is corrupted.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5018

Memory allocation failed during accessing repository of server data. code

Explanation

A memory shortage occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Perform the following in order to allocate a virtual memory area, and re-execute processing:

Increase the paging file size.
Terminate other applications.

swstf5019

Access to the AdvancedCopy Manager definition file failed during accessing repository of server data. code

Explanation

Access to the AdvancedCopy Manager definition file was unsuccessful.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5020

An internal error occurred during accessing repository of server data. code

Explanation

Processing cannot be continued because of an internal error.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5031

No device data is found in the specified server. code

Explanation

Device data is not found because the "Acquisition and Reflection of Information on All Devices" operation has not been performed.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Specify the server and perform the "Acquisition and Reflection of Information on All Devices" operation to check whether the device is displayed.

swstf5032

No data of the specified device is found in the specified server. code

Explanation

The specified device in the specified server has been excluded from management. Another user probably performed the "Acquisition and Reflection of Information on All Devices" or "Deletion of device information" operation for the device. This excludes the device from management.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Determine whether another user performed the "Acquisition and Reflection of Information on All Devices" or "Deletion of device information" operation.

Specify the server and refresh the screen. Then, re-execute processing.

swstf5033

An attempt to set up a connection to the repository failed during accessing repository of device data. code

Explanation

A connection to the repository cannot be set up because the repository is inactive.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Refer to the following manual and restart the relating daemon/service:

For Solaris or Linux: (Daemon type is "RDB daemon")
"Starting and Stopping Daemons" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows: (Service name is "SymfoWARE RDB RDBSWSTF")
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5034

The maximum allowable number of connections to the repository was exceeded during accessing repository of device data. code

Explanation

During accessing repository of device data, the number of concurrent connections to the repository exceeded the maximum allowed.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Wait a few minutes and re-execute processing.

swstf5035

A repository access error occurred during accessing repository of device data. code

Explanation

This is an SQL error that can occur while the repository is being searched for data.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Refer to the following manual and take appropriate action. Then, re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5036

A communication error occurred during accessing repository of device data. code

Explanation

A communication error occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Check whether the communication daemon/service of the Management Server starts.

If it starts, check whether the port number is correct.
If it does not start, refer to the following manual and restart the daemon/service. Then, re-execute processing:

For Solaris or Linux: (Daemon type is "Communication daemon")
"Starting and Stopping Daemons" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows: (Service name is "AdvancedCopy Manager COM Service")
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5037

A code conversion error occurred during accessing repository of device data. code

Explanation

The file required for code conversion was not found or is corrupted.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5038

Memory allocation failed during accessing repository of device data. code

Explanation

A memory shortage occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Perform the following in order to allocate more virtual memory, and re-execute processing:

Increase the paging file size.
Terminate other applications.

swstf5039

Access to the AdvancedCopy Manager definition file failed during accessing repository of device data. code

Explanation

An attempt to access the AdvancedCopy Manager definition file was unsuccessful.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5040

An internal error occurred during accessing repository of device data. code

Explanation

Processing cannot be continued because of an internal error.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Check whether the user that was specified as a repository access user specified in the environment setting during ETERNUS SF Manager installation has been deleted on the operating system, or if the password for the user has been changed.

If the above is true:
Refer to the following manual and again set the repository access user information.
"Change of password or deletion of the user who was specified as the repository access user" in the ETERNUS SF AdvancedCopy Manager Operation Guide
If the above is false:
Collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5051

Access to the AdvancedCopy Manager definition file failed during acquisition of the repository code. code

Explanation

An attempt to access the AdvancedCopy Manager definition file was unsuccessful.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5052

Memory allocation failed during acquisition of the repository code. code

Explanation

A memory shortage occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Perform the following in order to allocate more virtual memory, and re-execute processing:

Increase the paging file size.
Terminate other applications.

swstf5053

An internal error occurred during acquisition of the repository code. code

Explanation

Processing cannot be continued because of an internal error.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5054

An installation information error was detected during acquisition of the repository code. code

Explanation

An attempt to access the AdvancedCopy Manager definition file was unsuccessful.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5101

The server name is invalid. The name must not exceed 255 bytes.

Explanation

The server name that was entered is incorrect.

System action

The system terminates processing.

System administrator response

Confirm the following, and enter the name again:

The name must be 255 bytes or less.
The name must consist of only the following characters: single-byte alphanumeric characters, minus sign ("-"), underscore ("_"), hash character ("#"). The first character must be a single-byte alphanumeric character.

swstf5102

The IP address is invalid. Conform to the IP address format.

Explanation

The specified IP address format is incorrect.

System action

The system terminates processing.

System administrator response

Specify the IP address in the correct format.

swstf5103

The port number is invalid. Specify 1024 to 65535.

Explanation

The specified post number is invalid.

System action

The system terminates processing.

System administrator response

Specify any port number from 1024 to 65535.

swstf5104

An internal error occurred during server addition. code

Explanation

Processing cannot be continued because of an internal error.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5105

Memory allocation failed during server addition. code

Explanation

A memory shortage occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Perform the following in order to allocate more virtual memory, and re-execute processing:

Increase the paging file size.
Terminate other applications.

swstf5106

An internal error occurred during server changing. code

Explanation

Processing cannot be continued because of an internal error.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5107

Memory allocation failed during server changing. code

Explanation

A memory shortage occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Perform the following in order to allocate more virtual memory, and re-execute processing:

Increase the paging file size.
Terminate other applications.

swstf5108

An internal error occurred during server deletion. code

Explanation

Processing cannot be continued because of an internal error.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5109

Memory allocation failed during server deletion. code

Explanation

A memory shortage occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Perform the following in order to allocate more memory, and re-execute processing:

Increase the paging file size.
Terminate other applications.

swstf5110

The server name contains an invalid character.

Explanation

The specified server name contains an invalid character.

System action

The system terminates processing.

System administrator response

Specify a valid server name.

swstf5111

The version of specified IP address is different from the version of IP address of Management Server.

Explanation

The addition of server information cannot be performed because the version of the specified IP address is different from the IP address version of the Management Server.

System action

The system terminates processing.

System administrator response

It is necessary to match the IP address version specified when the Managed Server is added to the IP address version of the Management Server. Take the following action before executing this command:

When the IP address version to be specified is IPv6:
Change the IP address version of the Management Server to IPv6 or add an IPv6 address to the Management Server.
When the IP address version to be specified is IPv4:
Change the IP address version of the Management Server to IPv4 or add an IPv4 address to the Management Server.

swstf5112

The managed server of the same version as IP address of Management Server which tries to be deleted exists.

Explanation

The IP address of the Management Server cannot be changed because some Managed Servers with IP address of the same version as the version of deleted IP address exist.

System action

The system terminates processing.

System administrator response

The Management Server must have IP addresses of the same version as the version of IP addresses of the registered all Managed Servers. Take the following action according to the specified IP address version.

When the only IPv6 address is specified as the Management Server IP address to be changed:
Take one of the following actions because the Managed Server with an IPv4 address exists.
- Change the IP address version of all Managed Servers to IPv6 before executing this command.
- Specify the IPv4 and IPv6 addresses to the Management Server IP address to be changed.
When the only IPv4 address is specified as the Management Server IP address to be changed:
Take one of the following actions because the Managed Server with an IPv6 address exists.
- Change the IP address version of all Managed Servers to IPv4 before executing this command.
- Specify the IPv4 and IPv6 addresses to the Management Server IP address to be changed.

swstf5121

An internal error occurred during acquisition of device information. code

Explanation

Processing cannot be continued because of an internal error.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5122

Memory allocation failed during acquisition of device information. code

Explanation

A memory shortage occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Perform the following in order to allocate more virtual memory, and re-execute processing:

Increase the paging file size.
Terminate other applications.

swstf5123

An internal error occurred during processing for validating device information. code

Explanation

Processing cannot continue because of an internal error.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5124

Memory allocation failed during processing for validating device information. code

Explanation

A memory shortage occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Perform the following in order to allocate more virtual memory, and re-execute processing:

Increase the paging file size.
Terminate other applications.

swstf5125

An internal error occurred while the device information area was freed. code

Explanation

Processing cannot continue because of an internal error.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5126

An internal error occurred during device deletion. code

Explanation

Processing cannot continue because an internal error occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

swstf5127

Memory allocation failed during device deletion. code

Explanation

A memory shortage occurred.

Parameters

code : Internal code

System action

The system terminates processing.

System administrator response

Perform the following in order to allocate more virtual memory, and re-execute processing:

Increase the paging file size.
Terminate other applications.

swstf5131

Access to the AdvancedCopy Manager definition file failed during processing for display version information.

Explanation

An attempt to access the AdvancedCopy Manager definition file was unsuccessful.

System action

The system terminates processing.

System administrator response

swstf5141

Another user is changing management information. Re-execute processing later.

Explanation

Processing cannot be performed because the management information is being accessed.
If the following operations are performed using the Web Console or commands, an access to the management information occurs:

For using the Web Console:
When the following operations on the Action pane are performed:
- Register under Server
- Delete under Server
- Modify under Server
- Reset Password under Server
- Reload Conf. under Server
- Discover/Reload under Devices
- Delete under Devices
For using commands:
- stgxfwcmaddsrv command
- stgxfwcmmodsrv command
- stgxfwcmdelsrv command
- stgxfwcmsetdev command
- stgxfwcmdeldev command

System action

The system terminates processing.

System administrator response

After the management information has been changed completely by the Web Console or commands, re-execute processing.

swstf5161

A communication error occurred during execution of the JAVA application. Restart AdvancedCopy Manager.

Explanation

A communication error occurred during execution of the JAVA application. JAVA application may be stopped.
In the cluster operation, the fail over may be done.

System action

The system terminates processing.

System administrator response

In the cluster operation, check whether the fail over is done or not. If the fail over is done, re-execute processing on the active node.

In the non-cluster operation, refer to the following manual and restart the related daemon/service:

For Solaris or Linux: (Daemon type is "RMI daemon")
"Starting and Stopping Daemons" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows: (Service name is "AdvancedCopy Manager GUI Service")
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

Even if the above actions cannot solve the error, the IP address of the Management Server specified at installation may possibly be different. Execute stgenvdisp command to check the IP address of the Management Server.
If any unintentional IP address is displayed, refer to the following manual to change the IP address of the Management Server:
"Changing the IP address of Management Server" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5162

An internal error occurred during execution of the JAVA application. Restart AdvancedCopy Manager.

Explanation

An internal error occurred during execution of the JAVA application.

System action

The system terminates processing.

System administrator response

Refer to the following manual and restart the related daemon/service:

For Solaris or Linux: (Daemon type is "RMI daemon")
"Starting and Stopping Daemons" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows: (Service name is "AdvancedCopy Manager GUI Service")
"Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5171

A repository access error occurred. SQLSTATE=sqlState

Explanation

An error occurred during access to data in the repository.

Parameters

sqlState : Value of SQLSTATE

System action

The system terminates processing.

System administrator response

The following shows the user responses for codes shown in sqlState:

HZ220, 28000:
The user authentication at the time of database access resulted in an error. Check whether the user who specified it does exist, that the password has not changed, or in the case of Windows, that there is the required local logon authority.
Check whether the user that was specified as a repository access user specified in the environment setting during Manager installation has been deleted on the operating system, or if the password for the user has been changed.
If the above is true, refer to the following manual and again set the repository access user information.
"Change of password or deletion of the user who was specified as the repository access user" in the ETERNUS SF AdvancedCopy Manager Operation Guide
HZ180,40003:
The maximum number of simultaneous connections to a database was exceeded. Please perform the transaction again after waiting a few minutes.
S1000,HZ180,71001:
Refer to the following manual and restart the related daemon/service:
- For Solaris or Linux: (Daemon type is "RDB daemon")
  "Starting and Stopping Daemons" in the ETERNUS SF AdvancedCopy Manager Operation Guide
- For Windows: (Service name is "SymfoWARE RDB RDBSWSTF, SymfoWARE RDA RDBSWSTF")
  "Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide
null
Check whether Symfoware Client has been installed or not.

For codes other than the abovementioned, refer to the following manual and take appropriate action. Then, re-execute processing.
"Troubleshooting a repository access failure" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5172

Access to the AdvancedCopy Manager property file failed.

Explanation

The AdvancedCopy Manager property file could not be accessed.

System action

The system terminates processing.

System administrator response

swstf5173

AdvancedCopy Manager port number is not obtained.

Explanation

An attempt to obtain a port number for AdvancedCopy Manager failed.

System action

The system terminates processing.

System administrator response

For Solaris or Linux:
Check whether the port number definition shown in the following section in the ETERNUS SF Installation and Setup Guide exists in the /etc/services file:
- When this message is output on the Management Server:
  "Configuring the network environment" in "Setup of AdvancedCopy Manager's manager"
- When this message is output on the Managed Server:
  "Port number setting" in "Setup of AdvancedCopy Manager's agent"
If you still have a problem, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide
For Windows:
Collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf5401

User is a non root user.

Explanation

For Solaris or Linux:
A non-administrator (root) user executed the command.
For Windows:
A user that is not included in the Administrators group (Administrators) executed the command.

System action

The system terminates processing.

System administrator response

Ask a user with the required access privileges to re-execute the command.

swstf5402

The addition of the server caused a failure.
Component=componentName
Reason=reason

Explanation

Because an error occurred, the server information could not be added.

Parameters

componentName : Component name
reason : Reason

System action

The system terminates processing.

System administrator response

Refer to [System administrator response] regarding the message shown in reason. Take corrective action for the error, and re-execute the processing.

swstf5403

The change of the server caused a failure.
Component=componentName
Reason=reason

Explanation

Because an error occurred, the server information could not be changed.

Parameters

componentName : Component name
reason : Reason

System action

The system terminates processing.

System administrator response

Refer to [System administrator response] regarding the message shown in reason. Take corrective action for the error, and re-execute the processing.

swstf5404

The deletion of the server caused a failure.
Component=componentName
Reason=reason

Explanation

Because an error occurred, the server information could not be deleted.

Parameters

componentName : Component name
reason : Reason

System action

The system terminates processing.

System administrator response

Refer to [System administrator response] regarding the message shown in reason. Take corrective action for the error, and re-execute the processing.

swstf5405

The acquisition of device information caused a failure.
Component=componentName
Reason=reason

Explanation

Because an error occurred, the device information could not be collected.

Parameters

componentName : Component name
reason : Reason

System action

The system terminates processing.

System administrator response

Refer to [System administrator response] regarding the message shown in reason. Take corrective action for the error, and re-execute the processing.

swstf5406

The update of device information caused a failure.
Component=componentName
Reason=reason

Explanation

Because an error occurred, the device information could not be collected.

Parameters

componentName : Component name
reason : Reason

System action

The system terminates processing.

System administrator response

Refer to [System administrator response] regarding the message shown in reason. Take corrective action for the error, and re-execute the processing.

swstf5407

The update of the device information caused a failure.
Device=deviceName
Component=componentName
Reason=reason

Explanation

Because an error occurred, the device information could not be changed.

Parameters

deviceName : Device name
componentName : Component name
reason : Reason

System action

The system terminates processing.

System administrator response

Refer to [System administrator response] regarding the message shown in reason. Take corrective action for the error, and re-execute the processing.

swstf5408

There is no change in information currently being managed.

Explanation

There is no difference between the device information managed in the repository and the device information actually collected.

System action

The system continues processing.

System administrator response

No response is required.

swstf5409

The deletion of device information caused a failure.
Component=componentName
Reason=reason

Explanation

Because an error occurred, the device information could not be collected.

Parameters

componentName : Component name
reason : Reason

System action

The system terminates processing.

System administrator response

Refer to [System administrator response] regarding the message shown in reason. Take corrective action for the error, and re-execute the processing.

swstf5410

Failed to access the registry.

Explanation

Registry access failed.

System action

The system terminates processing.

System administrator response

Use a standard operating system function to recover the registry information.

swstf5411

Library could not be accessed.

Explanation

An error occurred when reading a library.

System action

The system terminates processing.

System administrator response

swstf5412

AdvancedCopy Manager port number is not set.

Explanation

A port number or protocol name of service rmiswstf or semswstf is set incorrectly in the following file:

For Solaris or Linux:
/etc/services
For Windows:
%SystemRoot%\system32\drivers\etc\services

System action

The system terminates processing.

System administrator response

Refer to the following manual and set the port number or protocol name correctly.
"Configuring the network environment" in "Setup of AdvancedCopy Manager's manager" in the ETERNUS SF Installation and Setup Guide

swstf5413

An internal inconsistency occurred.

Explanation

An internal inconsistency occurred.

System action

The system terminates processing.

System administrator response

swstf5414

Memory is insufficient.

Explanation

A memory shortage occurred.

System action

The system terminates processing.

System administrator response

Investigate the memory usage and if a memory shortage has actually occurred, increase the memory.

swstf5415

The file could not be created. File=fileName

Explanation

An error occurred at file creation.

Parameters

fileName : File name

System action

The system terminates processing.

System administrator response

Check whether the directory in which the specified file is created exists, and then re-execute the processing.

If the directory exists, check the amount of available device space, and then re-execute the processing.

Note that the locale specified during installation of the product is the value displayed in Code column when the stgenvdisp command is executed.

swstf5416

Code conversion error occurred.

Explanation

A code conversion error occurred.

System action

The system terminates processing.

System administrator response

swstf5417

Locale is not correct.

Explanation

The location used during command execution differs from that specified during product installation.

System action

The system terminates processing.

System administrator response

Set the location specified during product installation and then re-execute the command.

Note that the locale specified during installation of the product is the locale value displayed in Code column when the stgenvdisp command is executed.

swstf5418

Access to the AdvancedCopy Manager definition file failed.

Explanation

Access to the AdvancedCopy Manager definition file failed.

System action

The system terminates processing.

System administrator response

Note that the locale specified during installation of the product is the locale value displayed in Code column when the stgenvdisp command (Environment information display command) is executed.

swstf5421

The devices using the same copy area cannot be displayed to the specified device.

Explanation

Devices using the same copy area cannot be displayed for the specified device.

System action

The system terminates processing.

System administrator response

Check if the specified device is any of the following:

The device is not in the ETERNUS Disk storage system whose devices have the Advanced Copy function installed.
The device is an SDX object operated in logical volume mode.
The device has not been set up (i.e., settings may not be appropriate for an existing device; for example, the Advanced Copy license is not set, or the cache table size is not set or is insufficient).
The device is a VxVM volume that is not supported.

swstf5422

The devices in the same logical group cannot be displayed to the specified device.

Explanation

Devices in the same logical group cannot be displayed for the specified device.

System action

The system terminates processing.

System administrator response

Check if the specified device is LVM or VxVM.

When the device does not correspond to one of the abovementioned types, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf6001

Usage : stgenvdisp [-n Logical-Node-Name]

Explanation

An invalid option was specified with the command.

System action

The system terminates processing.

System administrator response

Confirm the correct usage of the command, and re-execute the command.

swstf6002

The environment of the specified logical node name does not exist.

Explanation

There is no environment of the specified logical node.

System action

The system terminates processing.

System administrator response

Please re-execute it after confirming logical node name.

swstf6003

The error occurred. Code = code1-code2-code3

Explanation

An error occurred.

Parameters

code1 : Internal code 1
code2 : Internal code 2
code3 : Internal code 3

System action

The system continues processing.

System administrator response

For code1, refer to the table below and take appropriate action.

Corresponding messages are displayed in information on erroneous transactions in a cluster environment.

Table 16.1 Internal code explanations and actions
Value of code1	Explanation	Action Plan
1	Access of the management file failed.	Collect the information required for troubleshooting and contact a Fujitsu system engineer. (*1)
2	Activation of the internal command failed.
3	An error occurred when information on the Management Server environment was displayed.	If the error occurred during cluster operation, then check whether the shared disk containing AdvancedCopy Manager shared data is mounted or is online. If the shared disk is not mounted or is offline, then mount it or set it to the online state, and re-execute the command. If no server was added in the Managed Server and Managed Server transaction, then "????" is displayed for the Manager IP address and the corresponding message is output. If the error occurred during non-cluster operation or during cluster operation with the shared disk mounted or online, collect the information required for troubleshooting and contact a Fujitsu system engineer. (*1)
4	The port number is not set.	Check the port number of the corresponding daemon/service in the following services file: For Solaris, Linux, HP-UX, or AIX: /etc/services For Windows: %SystemRoot%\system32\drivers\etc\services

*1: Refer to the following manual for an explanation on how to collect the information required for troubleshooting.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf8000

Registry reading failed.

Explanation

The registry could not be read.

System action

The system terminates processing.

System administrator response

Check whether AdvancedCopy Manager is installed correctly.

swstf8001

Registry information file reading failed.

Explanation

The registry information file could not be read.

System action

The system terminates processing.

System administrator response

Check whether AdvancedCopy Manager is installed normally.

swstf8002

DB environment setup failed.

Explanation

The DB environment could not be set up.

System action

The system terminates processing.

System administrator response

Perform error processing of the DB setup command and then retry. Note that this message is also output if Cancel is selected by the DB setup command.

swstf8004

Registry writing failed.

Explanation

Data could not be written to the registry.

System action

The system terminates processing.

System administrator response

swstf8007

A handle used to identify the service control manager database could not be obtained.

Explanation

A handle used to identify the service control manager database could not be obtained.

System action

The system terminates processing.

System administrator response

Refer to "Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide, and start the AdvancedCopy Manager service.

swstf8008

Service activation failed. Service name = serviceName

Explanation

The service shown in serviceName could not be started.

Parameters

serviceName : Service name

System action

The system terminates processing.

System administrator response

Refer to "Starting and Stopping Services" in the ETERNUS SF AdvancedCopy Manager Operation Guide, and start the service shown in serviceName.

swstf8100

The cluster setup of the primary node has been completed. Next, create the cluster environment of the secondary node.

Explanation

The cluster setup of the primary node has been completed.

System action

The system ends processing normally.

System administrator response

In accordance with the procedure for creating a cluster environment, perform the next step.

swstf8101

The cluster setup of the secondary node has been completed.

Explanation

The cluster setup of the secondary node has been completed.

System action

The system ends processing normally.

System administrator response

In accordance with the procedure for creating a cluster environment, perform the next step.

swstf8102

The cluster deletion of the primary node has been completed.

Explanation

The cluster deletion of the primary node has been completed.

System action

The system ends processing normally.

System administrator response

In accordance with the procedure for deleting a cluster environment, perform the next step.

swstf8103

The cluster deletion of the secondary node has been completed. Next, delete the cluster environment of the primary node.

Explanation

The cluster deletion of the secondary node has been completed.

System action

The system ends processing normally.

System administrator response

In accordance with the procedure for deleting a cluster environment, perform the next step.

swstf8104

The cluster setup command or cluster unsetup command is already running.

Explanation

The cluster setup command or cluster unsetup command is already running.

System action

The system terminates processing.

System administrator response

Verify that no other cluster setup command or cluster deletion command is running.

swstf8105

Failed to acquire information from the cluster file. Error Code = errCode, File Name = fileName

Explanation

It failed to acquire information from the cluster file.

Parameters

errCode : Error code
fileName : Cluster file name

System action

The system terminates processing.

System administrator response

swstf8106

No cluster environment setting file exists. File Name = fileName

Explanation

No cluster environment setting file exists.

Parameters

fileName : Cluster environment setting file name

System action

The system terminates processing.

System administrator response

For Solaris, Linux, HP-UX, or AIX:
Verify that a correct mount point name is used for the shared disk.
Check the mount status of the shared disk.
For Windows:
Contact a Fujitsu system engineer.

swstf8107

The cluster setup has been completed.

Explanation

The cluster setup has been completed.

System action

The system terminates processing.

System administrator response

Verify that the AdvancedCopy Manager logical node name or job name (service name) is not duplicated.

Verify that an AdvancedCopy Manager shared disk used in another cluster is not mounted.

swstf8108

Failed to acquire information from the registry information file. Error Code = errCode, File Name = fileName

Explanation

Failed to acquire information from the registry information file.

Parameters

errCode : Error code
fileName : Registry information file name

System action

The system terminates processing.

System administrator response

swstf8109

The processing was canceled.

Explanation

The processing was canceled.

System action

The system terminates processing.

System administrator response

No response is required.

swstf8110

A cluster system environment has been created in clusterName.

Explanation

A clustered system environment was already created in another clustered system.

Parameters

clusterName : Name of clustered system that has been created. The displayed strings and explanation are as follows:

Displayed Strings	Clustered System Name
SAFE	SynfinityCluster or PRIMECLUSTER
MSCS	MSCS or WSFC
MCSG	MC/ServiceGuard
VCS	VERITAS Cluster Server
PRM	PRIMECLUSTER
HACM	High Availability Cluster Multi-Processing
GEN	Clustered system used by the method of "Solaris/Linux/HP-UX version cluster setup" in the ETERNUS SF Cluster Environment Setup Guide.

System action

The system terminates processing.

System administrator response

Use the cluster setup command supported by the current OS to create a cluster environment.

swstf8111

The number of nodes that can be registered is exceeded. Maximum Number of Nodes=maxNumber

Explanation

The number of nodes that can be registered is exceeded.

Parameters

maxNumber : Maximum number of cluster environments that can be registered

System action

The system terminates processing.

System administrator response

Unsetup other cluster environments and re-execute processing.

If no other cluster environments can be modified, contact a Fujitsu system engineer.

swstf8112

The cluster setup tool does not support this version of AdvancedCopy Manager.

Explanation

The cluster setup tool does not support this version of AdvancedCopy Manager.

System action

The system terminates processing.

System administrator response

Check the version of AdvancedCopy Manager.

swstf8114

Failed to create a cluster environment on a shared disk. Error Code=errCode1-errCode2

Explanation

It failed to create a cluster environment on a shared disk.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

Verify that the shared disk can be used on the execution node.

swstf8115

The cluster environment creation command terminated with an error. Error Code = errCode1-errCode2, Package Name = pkgName

Explanation

The cluster environment creation command terminated with an error.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2
pkgName : Package name of the command that terminated with an error

System action

The system terminates processing.

System administrator response

Set up the environment for the package that terminated with an error in accordance with the relevant instructions.

For information on instruction for the package, refer to the following:

For Solaris, Linux, HP-UX, or AIX:
Other: Message/s output immediately to this message being output
For Windows:
- FJSVswstf: workDir\var\clset\clset_FJSVswstf.log
- FJSVswsts: workDir\var\clset\clset_FJSVswsts.log
- FJSVswsrp: workDir\var\clset\clset_FJSVswsrp.log
- PortServ: A message box that was output before this message was output
- DBSetUp: Contact a Fujitsu system engineer.

swstf8116

Failed to read the command definition file for creating a cluster environment.

Explanation

It failed to read the command definition file for creating a cluster environment.

System action

The system terminates processing.

System administrator response

swstf8117

Failed to set up information in the cluster file. Error Code = errCode, File Name = fileName

Explanation

Failed to set up information in the cluster file.

Parameters

errCode : Error code
fileName : Cluster file name

System action

The system terminates processing.

System administrator response

swstf8118

The service name is already used in another cluster environment nodeName.

Explanation

The service name (job name) was already being used in another cluster environment.

Parameters

nodeName : Name of AdvancedCopy Manager logical node that uses the service name (job name)

System action

The system terminates processing.

System administrator response

Check the service name

swstf8119

Failed to create a registry information file. Error Code = errCode1-errCode2

Explanation

Failed to create a registry information file.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8120

The node name is in an invalid format.

Explanation

The node name is in an invalid format.

System action

The system terminates processing.

System administrator response

Check the AdvancedCopy Manager logical node name.

swstf8121

The Storage Management Server has been constructed with another node name nodeName.

Explanation

The Management Server has been set up in AdvancedCopy Manager with another logical node name.

Parameters

nodeName : Name of AdvancedCopy Manager logical node constructed as a Management Server transaction

System action

The system terminates processing.

System administrator response

Check the logical node name in the setup of the Management Server transaction.

swstf8122

The primary node has an environment constructed with another cluster system clusterName.

Explanation

The primary node has an environment set up for another clustered system.

Parameters

clusterName : Clustered system of the primary node

System action

The system terminates processing.

System administrator response

Configure an environment using the same command as that for the clustered system of the primary node.

swstf8123

The primary node has an environment constructed with another server type serverType.

Explanation

The primary node has an environment set up with another server type.

Parameters

serverType : Server type of the primary node. The displayed strings and explanation are as follows:

Displayed Strings	Explanation
1	Management Server
2	Managed Server

System action

The system terminates processing.

System administrator response

Check the Managed Server type.

swstf8124

The primary node has an environment constructed with another language lang.

Explanation

The primary node has an environment set up with another language.

Parameters

lang : Language type of the primary node. The displayed strings and explanation are as follows:

Displayed Strings	Explanation
JAPANESE	Japanese version
ENGLISH	English version

System action

The system terminates processing.

System administrator response

Check the AdvancedCopy Manager language type.

swstf8125

The primary node has an environment constructed with another code code.

Explanation

The primary node has an environment set up with another code.

Parameters

code : Code of the primary node

System action

The system terminates processing.

System administrator response

Check the AdvancedCopy Manager code.

swstf8126

The primary node does not have a cluster environment.

Explanation

The primary node does not have a cluster environment.

System action

The system terminates processing.

System administrator response

Configure a cluster environment for the primary node.

Verify that the mount point or disk resource is correct.

swstf8127

The primary node has an environment constructed with another version version.

Explanation

The primary node has an environment set up with another version.

Parameters

version : Version of the primary node

System action

The system terminates processing.

System administrator response

Check the AdvancedCopy Manager version.

swstf8129

The primary node has an environment constructed with another AFS type type.

Explanation

The primary node has an environment set up with another AFS type.

Parameters

type : AFS type. The displayed strings and explanation are as follows:

Displayed Strings	Explanation
1	Non-AFS
2	AFS

System action

The system terminates processing.

System administrator response

Check the AdvancedCopy Manager AFS type.

swstf8130

No cluster environment has been created.

Explanation

No cluster environment has been created.

System action

The system terminates processing.

System administrator response

Verify that an AdvancedCopy Manager cluster environment was created.

swstf8131

The command for unsetup the cluster environment terminated with an error. Error Code = errCode1-errCode2, Package Name = pkgName

Explanation

The command for unsetup the cluster environment terminated with an error.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2
pkgName : Package name of the command that terminated with an error

System action

The system terminates processing.

System administrator response

Set up the environment for the package that terminated with an error in accordance with the relevant instructions.

For information on instructions for the package, refer to the following:

For Solaris, Linux, HP-UX, or AIX:
Other: Message/s output immediately to this message being output
For Windows:
- FJSVswstf: workDir\var\clset\clset_FJSVswstf.log
- FJSVswsts: workDir\var\clset\clset_FJSVswsts.log
- FJSVswsrp: workDir\var\clset\clset_FJSVswsrp.log
- PortServ: A message box that was output before this message was output
- DBSetUp: Contact a Fujitsu system engineer.

swstf8132

The cluster environment of the secondary node has not been deleted.

Explanation

The cluster environment of the secondary node has not been deleted.

System action

The system terminates processing.

System administrator response

After deleting the cluster environment of the secondary node, re-execute processing.

Execute processing after deleting the cluster environment of all secondary nodes in cluster operation.

swstf8133

Failed to clear the cluster file. Error Code = errCode, File Name = pathName

Explanation

It failed to clear the cluster file.

Parameters

errCode : Error code
pathName : Cluster file path

System action

The system continues processing.

System administrator response

Although the cluster environment was deleted, collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf8134

Failed to delete the cluster file. Error Code = errCode1-errCode2, File Name = pathName

Explanation

It failed to delete the cluster file.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2
pathName : Cluster file path

System action

The system continues processing.

System administrator response

swstf8135

Deletion of the cluster in forced mode has been completed.

Explanation

Deletion of the cluster in forced mode has been completed.

System action

The system ends processing.

System administrator response

In accordance with the procedure for deleting a cluster environment, perform the next step.

swstf8136

No cluster environment with the node name (nodeName) has been created.

Explanation

No cluster environment with the specified node name has been created.

Parameters

nodeName : Specified AdvancedCopy Manager logical node name

System action

The system terminates processing.

System administrator response

Check the AdvancedCopy Manager logical node name.

swstf8137

The node was not deleted.

Explanation

The node was not deleted.

System action

The system terminates processing.

System administrator response

After deleting the node, re-execute processing.

swstf8138

The cluster file does not exist. File Name = pathName

Explanation

The cluster file does not exist.

Parameters

pathName : Cluster file pathname

System action

The system terminates processing.

System administrator response

For Solaris, Linux, HP-UX, or AIX:
Check the mount status of the shared disk.
For Windows:
Collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf8139

Failed to restore the registry information file. Error Code = errCode

Explanation

It failed to restore the registry information file.

Parameters

errCode : Error code

System action

The system continues processing.

System administrator response

swstf8141

The secondary node has a cluster environment.

Explanation

The secondary node has a cluster environment.

System action

The system terminates processing.

System administrator response

Verify that the mount point or disk resource is correct.

swstf8142

The primary node has a cluster environment constructed with the logical node nodeName.

Explanation

The primary node has a cluster environment set up with the logical node.

Parameters

nodeName : AdvancedCopy Manager logical node name

System action

The system terminates processing.

System administrator response

Verify that the mount point or disk resource or shared disk is correct.

swstf8143

The cluster deletion of the secondary node has been completed. Next, delete the cluster environment of another secondary node.

Explanation

The cluster deletion of the secondary node has been completed. Next, delete the cluster environment of another secondary node.

System action

The system ends processing.

System administrator response

In accordance with the procedure for deleting a cluster environment, perform the next step.

swstf8199

An internal inconsistency occurred.

Explanation

An internal conflict occurred.

System action

The system terminates processing.

System administrator response

swstf8200

value1 or value2 must be specified in option.

Explanation

The value shown in value1 or value2 must be specified with the option shown in option.

Parameters

option : Option
value1 : Specifiable value 1
value2 : Specifiable value 2

System action

The system terminates processing.

System administrator response

Re-execute processing using correct values.

swstf8201

value must be specified in option.

Explanation

The value shown in value must be specified with the option shown in option.

Parameters

option : Option
value : Specifiable value

System action

The system terminates processing.

System administrator response

Re-execute processing using correct values.

swstf8202

Failed to start the command. Error Code = errCode1-errCode2, Command Name = commandName

Explanation

It failed to start the command.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2
commandName : Command name

System action

The system terminates processing.

System administrator response

swstf8203

The command was started by someone else than the root user.

Explanation

The command was started by someone else than the root user.

System action

The system terminates processing.

System administrator response

The root user must execute the command.

swstf8204

The -f option cannot be specified on the Storage server.

Explanation

The -f option cannot be specified on the Managed Server.

System action

The system terminates processing.

System administrator response

If the type of server which the AdvancedCopy Manager is installed is Manager, verify that the Management Server transaction has not already been set up.

Re-execute the command without the -f option.

swstf8205

The IP address was in an invalid format.

Explanation

The IP address was in an invalid format.

System action

The system terminates processing.

System administrator response

Check the IP address.

swstf8206

A reserved word was specified as the node name.

Explanation

A reserved word was specified as the node name.

System action

The system terminates processing.

System administrator response

Check the AdvancedCopy Manager logical node name.

swstf8207

Data different from the previous time was specified. Option = option, Data = data

Explanation

Data different from the previous time was specified.

Parameters

option : Option
data : Data previously specified

System action

The system terminates processing.

System administrator response

Check the option value.

swstf8208

Do not mount the shared disk.

Explanation

Do not mount the shared disk.

System action

The system terminates processing.

System administrator response

Check the mount state of the shared disk for AdvancedCopy Manager shared data.

When the server is the Management Server transaction, also check the mount state of DB file system.

swstf8209

Failed to start the mount check command.

Explanation

It failed to start the mount check command.

System action

The system terminates processing.

System administrator response

swstf8210

An error occurs though the cluster environment of AdvancedCopy Manager was removed. Carry out treatment corresponding to the message being output.

Explanation

An error occurs though the cluster environment of AdvancedCopy Manager was removed. Carry out treatment corresponding to the message being output.

System action

The system ends processing.

System administrator response

Comply with [System administrator response] of message that is output before this message.

swstf8211

The shared disk for another service is mounted. node=nodeName.

Explanation

The shared disk for another service is mounted.

Parameters

nodeName : Logical node name for the shared disk which is being mounted

System action

The system terminates processing.

System administrator response

Check whether the mounted shared disk is also object transactions.

swstf8212

The subnet was in an invalid format.

Explanation

The subnet was in an invalid format.

System action

The system terminates processing.

System administrator response

Check the format of the subnet.

swstf8213

Failed in the acquisition of the device information.

Explanation

It failed in the acquisition of the device information.

System action

The system terminates processing.

System administrator response

swstf8214

A device is different. The last device=deviceName1, This device=deviceName2

Explanation

The device has changed.

Parameters

deviceName1 : Device mounted to the mount point of the shared disk for AdvancedCopy Manager shared data when a command was executed last time
deviceName2 : Device mounted to the mount point of the shared disk for current AdvancedCopy Manager shared data

System action

The system terminates processing.

System administrator response

Mount the last time used device and re-execute processing.

swstf8215

The service is not offline.

Explanation

The service is not offline.

System action

The system terminates processing.

System administrator response

Stops the transactions and re-execute a command.

swstf8300

AdvancedCopy Manager has not been installed.

Explanation

AdvancedCopy Manager has not been installed.

System action

The system terminates processing.

System administrator response

Verify that AdvancedCopy Manager has been correctly installed.

swstf8301

The IP address or subnet mask was incorrect.

Explanation

The IP address or subnet mask was incorrect.

System action

The system terminates processing.

System administrator response

Check the IP address or subnet mask.

swstf8302

Failed to connect to the service control manager. Error Code = errCode

Explanation

It failed to connect to the service control manager.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8303

Failed to open the service. Service Name: serviceName, Error Code = errCode

Explanation

It failed to open the service.

Parameters

serviceName : Service name
errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8304

Failed to acquire the service status. Service Name: serviceName, Error Code = errCode

Explanation

It failed to acquire the service status.

Parameters

serviceName : Service name
errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8305

Failed to wait for a thread. Error Code = errCode

Explanation

It failed to wait for a thread.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8306

Failed to stop the service. Service Name: serviceName, Error Code = errCode

Explanation

It failed to stop the service.

Parameters

serviceName : Service name
errCode : Error code

System action

The system terminates processing.

System administrator response

Manually stop the service.

swstf8307

Failed to stop the service (timeout). Service Name: serviceName

Explanation

It failed to stop the service due to a timeout.

Parameters

serviceName : Service name

System action

The system terminates processing.

System administrator response

Manually stop the service.

swstf8308

The program will not be correctly installed if you cancel the setup now. Do you want to cancel the setup?

Explanation

The program will not be correctly installed if you cancel the setup now. Do you want to cancel the setup?

System action

The system terminates processing if Yes is clicked.

System administrator response

Select Yes to cancel setup.
Select No to continue setup.

swstf8309

No parameter was entered.

Explanation

No parameter was entered.

System action

The system terminates processing.

System administrator response

Enter parameters that were not entered.

swstf8310

The free space was not sufficient for the setup.

Explanation

The free space was not sufficient for the setup.

System action

The system terminates processing.

System administrator response

Secure necessary free space.

Verify that you have the ownership for the selected disk.

Check the status of the selected disk.

swstf8311

An invalid subnet mask was used.

Explanation

An invalid subnet mask was used.

System action

The system terminates processing.

System administrator response

Check the IP address or subnet mask.

swstf8312

Failed to create a directory. Directory = pathName

Explanation

It failed to create a directory.

Parameters

pathName : Directory path

System action

The system terminates processing.

System administrator response

After creating a directory, re-execute processing.

swstf8313

Failed to set up registry information.

Explanation

It failed to set up registry information.

System action

The system terminates processing.

System administrator response

swstf8314

The cluster environment will not be released if you cancel the unsetup now. Do you want to cancel the unsetup?

Explanation

The cluster environment will not be released if you cancel the unsetup now. Do you want to cancel the unsetup?

System action

The system terminates processing if Yes is clicked.

System administrator response

Select Yes to cancel unsetup.
Select No to continue unsetup.

swstf8315

No logical node name was selected.

Explanation

No logical node name was selected.

System action

The system terminates processing.

System administrator response

Select a logical node name.

swstf8316

Failed to create a thread. Error Code = errCode

Explanation

It failed to create a thread.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8317

Are you sure the cluster environment may be forcibly released?

Explanation

Are you sure the cluster environment may be forcibly released?

System action

The cluster environment is forcibly released if Yes is clicked.

System administrator response

Select Yes to continue forcibly unsetup.
Select No to cancel forcibly unsetup.

swstf8318

Failed to fetch computer name. Error Code = errCode

Explanation

It failed to fetch the computer name.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8400

Usage: stgclset_safe -k NodeType -m MountPoint [-n NodeName -s Service] [-i IPAddress -f mgr] [-r cmd]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf8401

For the primary node, specify an IP address, node name, and service name.

Explanation

For the primary node, specify an IP address, node name, and service name (job name).

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf8402

For the secondary node, no node type, or mount point can be specified.

Explanation

For the secondary node, no node type, or mount point can be specified.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf8403

Failed to register the status transition procedure. Error Code = errCode1-errCode2

Explanation

It failed to register the status transition procedure.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8404

SynfinityCluster or PRIMECLUSTER has not been installed.

Explanation

SynfinityCluster or PRIMECLUSTER has not been installed.

System action

The system terminates processing.

System administrator response

Check the SynfinityCluster or PRIMECLUSTER environment.

swstf8405

Usage: stgclunset_safe -n NodeName [-f]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf8406

Failed to delete the status transition procedure. Error Code = errCode1-errCode2

Explanation

it failed to delete the status transition procedure.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8407

For the Storage Management Server transaction, specify an IP Address.

Explanation

For the Management Server transaction, specify an IP Address.

System action

The system terminates processing.

System administrator response

Re-execute after checking the IP address.

swstf8408

For the Storage server transaction, no IP Address can be specified.

Explanation

For the Managed Server transaction, no IP Address can be specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8409

Failed to delete the CmdLine resource. Error Code=errCode1-errCode2

Explanation

It failed to delete the command line resource.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8410

It failed in the registration of the CmdLine resource. Error Code=errCode1-errCode2

Explanation

Failed to register the command line resource.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8450

Usage : stgclset_sun -k NodeType -m MountPoint [-h NetworkResource -n NodeName -s Service] [-i IPAddress -f mgr]

Explanation

An incorrect option has been specified.

System action

The system terminates processing.

System administrator response

Check the command, then re-execute.

swstf8451

For the primary node, specify a network resource, node name, and service name.

Explanation

Specify the network resource name, the node name, and the transaction name at the primary node.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8452

For the secondary node, it can not be specified except for node type and mount point.

Explanation

Only node type and mount point can be specified at the secondary node.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8453

For the Storage management server transaction, specify an IP address.

Explanation

Specify the IP address for the Management Server transaction.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8454

For the Storage server transaction, no IP address can be specified.

Explanation

An IP address cannot be specified for Managed Server transactions.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8455

Sun Cluster has not been installed.

Explanation

Sun Cluster is not installed.

System action

The system terminates processing.

System administrator response

Check the Sun Cluster environment.

swstf8456

The network resource is already used in another cluster environment nodeName.

Explanation

The network resource is already being used by another cluster environment.

Parameters

nodeName : Storage MGR logical node name that is using the network resource

System action

The system terminates processing.

System administrator response

Ensure the network resource as specified is the correct one.

swstf8457

Failed to add AdvancedCopy Manager resource.

Explanation

AdvancedCopy Manager resource registration failed.

System action

The system terminates processing.

System administrator response

The "scrgadm" command executed using the cluster configuration commands is displayed on the screen. Fix the "scrgadm" command problem, and then re-execute the cluster configuration command.

swstf8458

Failed to execute the AdvancedCopy Manager resource add command.

Explanation

The AdvancedCopy Manager resource registration command failed to start.

System action

The system terminates processing.

System administrator response

Contact your Fujitsu system engineer.

swstf8459

Failed to delete the AdvancedCopy Manager resource.

Explanation

The AdvancedCopy Manager application resource deletion failed.

System action

The system terminates processing.

System administrator response

Manually delete the AdvancedCopy Manager application resource for the relevant transaction.

The application resource name is "STGMGR-APP-logicalNodeName".

swstf8460

Failed to delete the AdvancedCopy Manager resource type.

Explanation

The AdvancedCopy Manager resource type deletion failed.

System action

The system terminates processing.

System administrator response

Manually delete the AdvancedCopy Manager resource type.

The AdvancedCopy Manager resource type name is "FJSV.S-MGR".

swstf8461

Failed to confirm the resource group. code=code. group=groupName

Explanation

Confirmation of the resource group failed.

Parameters

code : Internal code
groupName : Resource group name

System action

The system terminates processing.

System administrator response

If code is 0, check that "RG MODE=Failover" is set for the transaction (resource group).

If code is a value other than 0, contact your Fujitsu system engineer.

swstf8462

Usage: stgclunset_sun -n NodeName [-f]

Explanation

An incorrect option is specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8500

A parameter was specified.

Explanation

A parameter was specified.

System action

The system terminates processing.

System administrator response

Execute the command without specifying a parameter.

swstf8501

Cluster Service was not started.

Explanation

Cluster Service was not started.

System action

The system terminates processing.

System administrator response

Check the MSCS or cluster service environment.

swstf8502

MSCS has not been installed.

Explanation

MSCS or WSFC has not been installed.

System action

The system terminates processing.

System administrator response

Check the MSCS or cluster service environment. Verify the following:

whether MSCS or WSFC is installed
whether setup of MSCS or WSFC is completed

swstf8503

Failed to acquire the drive name from the physical disk resource.

Explanation

It failed to acquire the drive name from the physical disk resource.

System action

The system terminates processing.

System administrator response

Check the MSCS or cluster service environment.

swstf8504

The usage of the IP address was not specified.

Explanation

The usage of the IP address was not specified.

System action

The system terminates processing.

System administrator response

Specify the IP address.

swstf8505

Failed to acquire the quorum disk name. Error Code = errCode

Explanation

It failed to acquire the quorum disk name.

System action

errCode : Error code

System action

The system terminates processing.

System administrator response

Verify that the quorum disk is operating normally.

swstf8506

Failed to acquire the quorum disk information.

Explanation

It failed to acquire the quorum disk information.

System action

The system terminates processing.

System administrator response

Acquire the ownership of the quorum disk.

swstf8507

Failed to acquire the quorum disk information. Error Code = errCode

Explanation

It failed to acquire the quorum disk information.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

Verify that the quorum disk is operating normally.

swstf8508

Failed to acquire the primary node name. Error Code = errCode

Explanation

It failed to acquire the primary node name.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8509

Failed to check the cluster group. Error Code = errCode

Explanation

It failed to check the cluster group.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8510

Failed to create a cluster group. Error Code = errCode

Explanation

It failed to create a cluster group.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8511

Failed to set up the property information of the cluster group. Error Code = errCode

Explanation

It failed to set up the property information of the cluster group.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

Verify that the cluster name is correct.

swstf8512

Check whether group groupName exists. Error Code = errCode

Explanation

Check whether the group exists.

Parameters

groupName : Cluster group name
errCode : Error code

System action

The system terminates processing.

System administrator response

Verify that the group exists.

swstf8513

Failed to create a cluster resource. Error Code = errCode

Explanation

It failed to create a cluster resource.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8514

Failed to set up the property information of the cluster resource. Error Code = errCode

Explanation

It failed to set up the property information of the cluster resource.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

Check the followings:

Whether the cluster name is correct.
Whether the network name for external connection is correct.
Whether the network for external connection is available.
Whether the network name and IP address overlap others.

swstf8515

Failed to add a cluster dependence relationship. Error Code = errCode

Explanation

It failed to add a cluster dependence relationship.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8516

Failed to copy registry registry. Resource Name = resourceName

Explanation

It failed to replicate the registry.

Parameters

registry : Registry
resourceName : Resource name

System action

The system terminates processing.

System administrator response

swstf8517

Failed to set up the priority ownership. Error Code = errCode

Explanation

It failed to set up the priority ownership.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

A check is performed as to whether the cluster group specified by the service name (job name) in the cluster administrator (MSCS) or Failover Cluster Manager (WSFC) exists.

When the cluster group exists, the property is checked for priority ownership.
When priority ownership has been set up, the cluster configuration command is executed again.
When there is no cluster group, the cluster group of a service name (job name) is created and a cluster configuration command is executed again.
When priority ownership is not set up, priority ownership is set up and a cluster configuration command is executed again.

swstf8518

Failed to acquire the local node name. Error Code = errCode

Explanation

It failed to acquire the local node name.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8519

Acquire the ownership of groupName group.

Explanation

Acquire the ownership of the group.

Parameters

groupName : Cluster group name

System action

The system terminates processing.

System administrator response

Acquire the ownership of the cluster group.

swstf8520

Failed to check the ownership of the group. Error Code = errCode

Explanation

It failed to check the ownership of the group.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8521

Failed to place resourceName offline. Error Code = errCode1-errCode2

Explanation

It failed to place the resource offline.

Parameters

resourceName : Resource name
errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

After manually placing the resource offline, re-execute processing.

swstf8522

Failed to delete the resource. Resource Name = resourceName, Error Code = errCode

Explanation

It failed to delete the resource.

Parameters

resourceName : Resource name
errCode : Error code

System action

The system continues processing.

System administrator response

Manually delete the resource.

swstf8523

Failed to move the group. Error Code = errCode

Explanation

Failed to move the group.

Parameters

errCode : Error code

System action

The system continues processing.

System administrator response

swstf8524

Failed to find the cluster file. File Name = fileName

Explanation

Failed to find the cluster file.

Parameters

fileName : Cluster file name

System action

The system terminates processing.

System administrator response

Verify that the shared disk is online.

swstf8550

Usage : stgclset_mcsg -k NodeType -m MountPoint [-n NodeName -s Service -v VolumeGroup -i IPAddress -u Subnet]

Explanation

The syntax is incorrect or an invalid option has been specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8551

For the primary node, specify all options.

Explanation

For the primary node, specify all options.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8552

For the secondary node, no node name or mount point can be specified.

Explanation

For the secondary node, no node name or mount point can be specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8553

Usage : stgclunset_mcsg -n NodeName [-f]

Explanation

The syntax is incorrect or an invalid option has been specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8554

Failed in the preparation of the AdvancedCopy Manager start/stop command for the package.

Explanation

It failed in the preparation of the AdvancedCopy Manager start/stop command for the package.

System action

The system terminates processing.

System administrator response

swstf8555

Failed in the deletion of the AdvancedCopy Manager start/stop command for the package.

Explanation

It failed in the deletion of the AdvancedCopy Manager start/stop command for the package.

System action

The system terminates processing.

System administrator response

swstf8556

Failed in the preparation of the sample control script for the package.

Explanation

It failed in the preparation of the sample control script for the package.

System action

The system terminates processing.

System administrator response

swstf8600

Usage : stgclset_vcs -k NodeType -m MountPoint [ -n NodeName -s Service] [-i IPAddress -f mgr]

Explanation

The syntax is incorrect or an invalid option has been specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8601

For the primary node, specify a node name, service name.

Explanation

For the primary node, specify a node name, service name.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8602

VERITAS Cluster Server has not been installed.

Explanation

VERITAS Cluster Server has not been installed.

System action

The system terminates processing.

System administrator response

Check the environment of VERITAS Cluster Server.

swstf8603

Usage: stgclunset_vcs -n NodeName [-f]

Explanation

The syntax is incorrect or an invalid option has been specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8604

Failed to create the AdvancedCopy Manager application. Error Code = errCode1-errCode2

Explanation

It failed to make the AdvancedCopy Manager application.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8605

For the secondary node, it can not be specified except for node type and mount point.

Explanation

For the secondary node, it cannot be specified except for node type and mount point.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8606

For the Storage Management Server transaction, specify an IP address.

Explanation

For the Management Server transaction, specify an IP address.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8607

For the Storage server transaction, no IP address can be specified.

Explanation

For the Managed Server transaction, no IP address can be specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8608

Failed to delete the AdvancedCopy Manager application. Error Code = errCode1-errCode2

Explanation

It failed to delete the AdvancedCopy Manager application.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8650

Usage: stgclset_lxprm -k NodeType -m MountPoint [-n NodeName -s Service] [-i IPAddress -f mgr][-r cmd]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8651

For the primary node, specify a node name and service name.

Explanation

For the primary node, specify a node name and service name.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8652

For the secondary node, it cannot be specified except for node type and mount point.

Explanation

For the secondary node, it cannot be specified except for node type and mount point.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8653

Failed to register the status transition procedure. Error Code = errCode1-errCode2

Explanation

It failed to register the status transition procedure.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8654

PRIMECLUSTER has not been installed.

Explanation

PRIMECLUSTER has not been installed.

System action

The system terminates processing.

System administrator response

Check the PRIMECLUSTER environment.

swstf8655

Usage: stgclunset_lxprm -n NodeName [-f]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8656

Failed to delete the status transition procedure. Error Code = errCode1-errCode2

Explanation

It failed to delete the status transition procedure.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8657

For the Storage Management Server transaction, specify an IP address.

Explanation

For the Management Server transaction, specify an IP Address.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8658

For the Storage server transaction, no IP address can be specified.

Explanation

For the Managed Server transaction, no IP Address can be specified.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf8659

Failed to delete the CmdLine resource. Error Code=errCode1-errCode2

Explanation

It failed to delete the command line resource.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8660

It failed in the registration of the CmdLine resource. Error Code=errCode1-errCode2

Explanation

It failed to register the command line resource.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf8800

An internal inconsistency occurred.

Explanation

An internal inconsistency occurred.

System action

The system terminates processing.

System administrator response

swstf8801

No port number was entered.

Explanation

No port number was entered.

System action

The system terminates processing.

System administrator response

Enter the port number and retry.

swstf8802

The same port number was entered.

Explanation

The same port number was entered.

System action

The system terminates processing.

System administrator response

Check the port number.

Check whether the port number is right. Please perform by the port number which is not used by others.

swstf8803

Port number specified in serviceName1 has already been specified.
Service that uses the port number=serviceName2

Explanation

The port number which had already been registered was specified.

Parameters

serviceName1 : Service name
serviceName2 : Registered service name

System action

The system terminates processing.

System administrator response

Check the port number and retry.

swstf8804

An error occurred in searching port number information.

Explanation

An error occurred in searching port number information.

System action

The system terminates processing.

System administrator response

swstf8805

Port number specified in serviceName has been set up with a different number.

Explanation

Port number specified has been set up with a different number.

Parameters

serviceName : Service name

System action

The system terminates processing.

System administrator response

Check the port number.

When you change a port number, manually change the port number of the live operations communication service (stgxfws_logicalNodeName) found in the %SystemRoot%\system32\drivers\etc\services, and re-execute the task.

swstf8806

Failed to register service serviceName.

Explanation

It failed to register service.

Parameters

serviceName : Service name

System action

The system terminates processing.

System administrator response

swstf8807

Failed to delete service serviceName.

Explanation

It failed to delete service.

Parameters

serviceName : Service name

System action

The system terminates processing.

System administrator response

swstf8809

Failed to acquire an account of AdvancedCopy Manager.

Explanation

It failed to acquire an account of AdvancedCopy Manager.

System action

The system terminates processing.

System administrator response

swstf8810

Failed to register to the port number management file. Error=errCode

Explanation

It failed to register to the port number management file.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8811

Failed to read the port number management file. Error=errCode

Explanation

It failed to read the port number management file.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8812

Failed to write the port number. Error=errCode

Explanation

It failed to write the port number.

Parameters

errCode : Error code

System action

The system terminates processing.

System administrator response

swstf8813

Failed to acquire machine information.

Explanation

It failed to acquire machine information.

System action

The system terminates processing.

System administrator response

If the cluster is customized by the user belonging to the Domain Administrators group in a cluster environment for Windows:
Check whether Computer Browser service is running or not. Refer to "Customization for Windows version" in the ETERNUS SF Cluster Environment Setup Guide about the Computer Browser service.
In the case other than mentioned above:
Collect the information required for troubleshooting as described in the following manual and contact a Fujitsu system engineer.
"Collecting maintenance information" in the ETERNUS SF AdvancedCopy Manager Operation Guide

swstf8814

An invalid password was entered.

Explanation

An invalid password was entered.

System action

The system terminates processing.

System administrator response

Check the password.

swstf8815

Failed to write the linefeed.

Explanation

It failed to write the linefeed.

System action

The system terminates processing.

System administrator response

Start a new line for the last of the %SystemRoot%\system32\drivers\etc\services file manually, and then re-execute.

swstf8816

Failed to confirm the linefeed.

Explanation

It failed to confirm the linefeed.

System action

The system terminates processing.

System administrator response

swstf8901

This command arguments are incorrect.

Explanation

The command arguments are incorrect.

System action

The system terminates processing.

System administrator response

Do not execute this command. Execute the cluster unsetup command to unsetup the cluster setting.

Specify the correct argument to the command, if the cluster setup has been done by the method of "Solaris/Linux/HP-UX version cluster setup" in the ETERNUS SF Cluster Environment Setup Guide.

swstf8902

Failed to open the cluster environment setting file. Filename=fileName

Explanation

The cluster environment setting file (clsetup.ini) could not be opened.

Parameters

fileName : File name

System action

The system terminates processing.

System administrator response

Check for the presence of the file and the access permission, and re-execute the command.

swstf8903

Failed to read the cluster environment setting file. Filename=fileName, Section=sectionName, Key=keyName

Explanation

The cluster environment setting file (clsetup.ini) could not be read.

Parameters

fileName : File name
sectionName : Section name
keyName : Key name

System action

The system terminates processing.

System administrator response

Check the access permission and the accuracy of the file data, and re-execute the command.

swstf8904

Failed to open the registry. Registry=registry, Key=keyName, Error=errCode

Explanation

The registry could not be opened.

Parameters

registry : Registry
keyName : Key name
errCode : Error code

System action

The system terminates processing.

System administrator response

Recover registry information by using the OS standard function.

swstf8905

Failed to read the registry. Registry=registry, Key=keyName, Value=value, Error=errCode

Explanation

The registry could not be read.

Parameters

registry : Registry
keyName : Key name
value : Value name
errCode : Error code

System action

The system terminates processing.

System administrator response

Recover registry information by using the OS standard function.

swstf8906

Failed to open the cluster setting definition file. Filename=fileName

Explanation

The cluster setting define file could not be opened.

Parameters

fileName : File name

System action

The system terminates processing.

System administrator response

Check for the presence of the cluster setting definition file shown in fileName and the access permission and re-execute the command.

swstf8907

Failed to read the cluster setting definition file. Filename=fileName, Line=lineNumber, Value=value

Explanation

The cluster setting definition file could not be read.

Parameters

fileName : File name
lineNumber : Line number
value : Data

System action

The system terminates processing.

System administrator response

The cluster setting definition file shown in fileName may be corrupt. Replace the cluster setting definition file with the file that was originally installed and then re-execute the command.

swstf8908

The directory does not exist. Directory=dirName

Explanation

The directory could not be found.

Parameters

dirName : Directory name

System action

The system terminates processing.

System administrator response

Check for the presence of the directory and the access permission, and re-execute the command.

swstf8909

Failed to copy the directory. Source Directory=srcDirName, Target Directory=dstDirName

Explanation

The directory could not be copied.

Parameters

srcDirName : Source directory for copying
dstDirName : Destination directory for copying

System action

The system terminates processing.

System administrator response

Check for the presence of the directory, the access permission, the free disk space, and re-execute the command.

swstf8910

Failed to delete the directory. Directory=dirName

Explanation

The directory could not be deleted.

Parameters

dirName : Directory name

System action

The system terminates processing.

System administrator response

Check for the presence of the directory and the access permission, and re-execute the command.

swstf8911

Failed to move the directory. Source Directory=srcDirName, Target Directory=dstDirName

Explanation

The file could not be moved.

Parameters

srcDirName : Source directory for moving
dstDirName : Destination directory for moving

System action

The system terminates processing.

System administrator response

Check for the presence of the directory, the access permission, the free disk space, and re-execute the command.

swstf8912

Failed to create a directory. Directory=dirName

Explanation

The directory could not be created.

Parameters

dirName : Directory name

System action

The system terminates processing.

System administrator response

Check the access permission and the free disk space, and re-execute the command.

swstf8913

Failed to copy the file. Source Filename=srcFileName, Target Filename=dstFileName

Explanation

The file could not be copied.

Parameters

srcFileName : Source file for copying
dstFileName : Destination file for copying

System action

The system terminates processing.

System administrator response

Check for the presence of the file and the access permission, and re-execute the command.

swstf8914

Failed to delete the file. Filename=fileName

Explanation

The file could not be deleted.

Parameters

fileName : File name

System action

The system terminates processing.

System administrator response

Check for the presence of the file and the access permission, and re-execute the command.

swstf8915

Failed to move the file. Source Filename=srcFileName, Target Filename=dstFileName

Explanation

The file could not be moved.

Parameters

srcFileName : Source file for moving
dstFileName : Destination file for moving

System action

The system terminates processing.

System administrator response

Check for the presence of the directory, the access permission, the free disk space. Then, re-execute the command.

swstf8916

Failed to create a link. Source Path=srcPathName, Target Path=dstPathName

Explanation

The link could not be created.

Parameters

srcPathName : Link source
dstPathName : Link target

System action

The system terminates processing.

System administrator response

Check for the presence of the directory, the access permission, the free disk space. Then, re-execute the command.

swstf8917

The command could not be called or the command failed. Command Line=commandLine

Explanation

The command could not be executed or command failed.

Parameters

commandLine : Command line

System action

The system terminates processing.

System administrator response

Check for the presence of the command shown in commandLine.

swstf9000

Usage : swtgclset_hacmp -k NodeType -m MountPoint [-n NodeName -s Service]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf9001

For the primary node, specify a node name, service name.

Explanation

For the primary node, specify a node name, service name.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf9002

High Availability Cluster Multi-Processing has not been installed.

Explanation

High Availability Cluster Multi-Processing has not been installed.

System action

The system terminates processing.

System administrator response

Check the environment of High Availability Cluster Multi-Processing.

swstf9003

Usage : stgclunset_hacmp -n NodeName [-f]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf9004

Failed to create the AdvancedCopy Manager application. Error Code = errCode1-errCode2

Explanation

It failed to make the AdvancedCopy Manager application.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf9005

For the secondary node, it can not be specified except for node type and mount point.

Explanation

For the secondary node, it cannot be specified except for node type and mount point.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf9008

Failed to delete the AdvancedCopy Manager application. Error Code = errCode1-errCode2

Explanation

It failed to delete the AdvancedCopy Manager application.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf9050

Usage : stgclset_aixvcs -k NodeType -m MountPoint [ -n NodeName -s Service]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf9051

For the primary node, specify a node name, service name.

Explanation

For the primary node, specify a node name, service name.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf9052

VERITAS Cluster Server has not been installed.

Explanation

VERITAS Cluster Server has not been installed.

System action

The system terminates processing.

System administrator response

Check the environment of VERITAS Cluster Server.

swstf9053

Usage: stgclunset_aixvcs -n NodeName [-f]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf9054

Failed to create the AdvancedCopy Manager application. Error Code = errCode1-errCode2

Explanation

It failed to make the AdvancedCopy Manager application.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf9055

For the secondary node, it can not be specified except for node type and mount point.

Explanation

For the secondary node, it cannot be specified except for node type and mount point.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf9058

Failed to delete the AdvancedCopy Manager application. Error Code = errCode1-errCode2

Explanation

It failed to delete the AdvancedCopy Manager application.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf9100

Usage : stgclset_hpvcs -k NodeType -m MountPoint [ -n NodeName -s Service]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf9101

For the primary node, specify a node name, service name.

Explanation

For the primary node, specify a node name, service name.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf9102

VERITAS Cluster Server has not been installed.

Explanation

VERITAS Cluster Server has not been installed.

System action

The system terminates processing.

System administrator response

Check the environment of VERITAS Cluster Server.

swstf9103

Usage: stgclunset_hpvcs -n NodeName [-f]

Explanation

An invalid option was specified.

System action

The system terminates processing.

System administrator response

After checking the command, re-execute processing.

swstf9104

Failed to create the AdvancedCopy Manager application. Error Code = errCode1-errCode2

Explanation

It failed to make the AdvancedCopy Manager application.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response

swstf9105

For the secondary node, it can not be specified except for node type and mount point.

Explanation

Only node type and mount point can be specified for the secondary node.

System action

The system terminates processing.

System administrator response

Check that the command syntax is complete with all the required parameters, and re-execute.

swstf9108

Failed to delete the AdvancedCopy Manager application. Error Code = errCode1-errCode2

Explanation

It failed to delete the AdvancedCopy Manager application.

Parameters

errCode1 : Error code 1
errCode2 : Error code 2

System action

The system terminates processing.

System administrator response