Top
Systemwalker Runbook Automation Installation Guide
Systemwalker
Chapter 2 Installation > 2.2 Installing on Management Servers > 2.2.3 Installing on Linux Systems
PreviousNext

2.2.3 Installing on Linux Systems

This section describes how to install when the Management Server is running on Linux.

There are two types of installation: Standard Installation and Custom Installation. To set up all parameters using the default values, perform a Standard Installation. To set up parameters using values other than the default values, perform a Custom Installation.

Note

  • If the installation fails, restart the system and then log in again as the same user that performed the installation. Then, uninstall the product according to the uninstallation procedure.

    After uninstalling the product, eliminate the cause of the failure by referring to the meaning and action method for the message that was output, and then install Systemwalker Runbook Automation again.

    Refer to the Systemwalker Runbook Automation Message Guide for details on messages.

    Refer to "Chapter 7 Uninstallation" for details on how to uninstall Systemwalker Runbook Automation.

    If the problem cannot be resolved based on the messages that are output, collect the following log files and contact Fujitsu technical support.

    • /var/tmp/swrba_inst.log

    • /var/tmp/bndl_inst.log

    • /opt/FJSVibpm/Interstage-BPM-log.txt

    • /opt/FJSVcmdbm/var/log/cmdbInstLog

    • /var/opt/FJSVcmdbm/var/log/cmdbInstLog

2.2.3.1 Standard Installation

This section explains the Standard Installation procedure.

A Standard Installation installs Systemwalker Runbook Automation using the following default values:

Setting item

Meaning

Default value

CMDB Manager database directory settings

Database storage directory for the CMDB Manager

/var/opt

Interstage Management Console port

The port number for accessing the Interstage Management Console

12000

Port number of Web server (Interstage HTTP Server)

The port number for accessing the Web console

80

Port number of CORBA service

Port numbers used internally

8002

Port number of HTTP Listener

Port numbers used internally

28080

Port number of HTTP Listener for peration Management

The port number for accessing the Interstage Java EE Management Console

12001

Port number of IIOP

Port numbers used internally

23600

Port number of IIOP_SSL

Port numbers used internally

23601

Port number of IIOP_MUTUALAUTH

Port numbers used internally

23602

Port number of JMX_ADMIN

Port numbers used internally

8686

Subsystem Number

The subsystem number for Systemwalker Operation Manager that is used by Systemwalker Runbook Automation

9

Job Scheduler Port number

Port numbers used internally

9690

Job Execution Control Port number

Port numbers used internally

9691

Note

Refer to "2.2.3.2 Custom Installation" for information on the settings and information used to check for port number duplication.

  1. Log in as a superuser on the system.

  2. Insert the DVD-ROM in the DVD-ROM drive.

    Insert the DVD-ROM labeled "Systemwalker Runbook Automation Media Pack (15.1.2) Disc No. 1/2" in the DVD-ROM drive.

  3. Mount the DVD-ROM.

    Use the following command to mount the DVD-ROM.

    If the DVD-ROM is automatically mounted by the "autofs" automatic mount daemon, "noexec" will be set for the mount option, and so the installer will fail to start.

    # mount -t iso9660 -r /dev/mnt <mount point for the DVD-ROM>

  4. Start the installer.

    Executing the special installation command for this software (swsetup) installs multiple packages as a batch. The method for starting the installer is as follows:

    # <mount point for the DVD-ROM>/swsetup

  5. A welcome window will be displayed. Press the Enter key.

    ================================================================================
                  Systemwalker Runbook Automation Setup
                                    V15.1.2
        All Rights Reserved, Copyright(c) FUJITSU LIMITED 2010-2012
================================================================================

Welcome to the Systemwalker Setup.
The setup will install Systemwalker Runbook Automation.

Press ENTER.

  6. A window for selecting the installation destination server will be displayed. Select "Management server". Enter "1".

    ================================================================================
                  Systemwalker Runbook Automation Setup
                                    V15.1.2
        All Rights Reserved, Copyright(c) FUJITSU LIMITED 2010-2012
================================================================================

<< Select the installation folder >>

1. Management Server

================================================================================
Select one of the items above.
[q,number]
=>1

  7. The installer for the Management Server will start. To start the installation process, press "y".

    Preparing installation.
Please wait for a while.
Systemwalker Runbook Automation ( Management Server )
Start the installation?
[y,n]
=> y

  8. Select the installation type. To perform a Standard Installation, enter "1".

    === Select Installation Type ===
Input Installation Type
1:Standard installation
2:Custom installation
[ENTER:1]
=> 1

  9. Check the installation settings.

    In the Confirm continuation of installation processing window, check the content that has been entered, and then enter "y" if there are no mistakes. Installation will start.

    If the installation information is changed, enter the port number for the items that are changed.

    === Select Installation Type ===
1.Installation Type: Standard installation

=== Installation Directory  ===
Program deployment destination: /opt
Setup files deployment destination: /etc/opt
Work files deployment destination: /var/opt
=== Storage folder for CMDB Manager database  ===
CMDB Manager database directory: /var/opt
=== Systemwalker Runbook Automation port  ===
Port number of Interstage Management Console: 12000
Port number of Web server (Interstage HTTP Server): 80
Port number of CORBA Service: 8002
Port number of HTTP Listener: 28080
Port number of HTTP Listener for Operation Management: 12001
Port number of IIOP: 23600
Port number of IIOP_SSL: 23601
Port number of IIOP_MUTUALAUTH: 23602
Port number of JMX_ADMIN: 8686
=== Systemwalker Runbook Automation Advanced Setup for Scheduling  ===
Subsystem Number: 9
Port number of Job Scheduler: 9690
Port number of Job Execution Control: 9691

Is it OK to install by this settings? To change an item input the item number.
[y,q,number]
=> y

    Note

    Port numbers are not displayed in an environment where Systemwalker Service Catalog Manager has been installed.

  10. The installation will start.

    Once the preparations for the installation are complete, the following window will be displayed, and the installation will start.

    Installing...

  11. The installation process will be terminated.

    After the installation is completed, the window below will be displayed. Enter "y" to restart the system.

    Systemwalker Runbook Automation ( Management Server ) install completed.
The system must be restarted to complete the installation. Restart the system now?
[y,n]}

2.2.3.2 Custom Installation

This section explains the Custom Installation procedure.

  1. Log in as a superuser on the system.

  2. Insert the "Systemwalker Runbook Automation Media Pack (15.1.2) Disc No. 1/2 Disc" DVD-ROM in the drive.

  3. Mount DVD-Rom by following command

    If you start by automatic mount daemon(autofs), installer will be failed because of having "noexec" option.

    # mount -t iso9660 -r /dev/mnt DVD-ROM mount point

  4. Start the installer:

    # <DVD-ROM mount point>/swsetup

    This command installs multiple packages as a batch.

  5. After the welcome text, press Enter key.

    ================================================================================
                  Systemwalker Runbook Automation Setup
                                    V15.1.2
        All Rights Reserved, Copyright(c) FUJITSU LIMITED 2010-2012
================================================================================

Welcome to the Systemwalker Setup.
The setup will install Systemwalker Runbook Automation.

Press ENTER.

  6. At the prompt for the installation directory, enter "1".

    ================================================================================
                 Systemwalker Runbook Automation Setup
                                    V15.1.2
        All Rights Reserved, Copyright(c) FUJITSU LIMITED 2010-2012
================================================================================

<< Select the installation folder >>

1. Management Server

================================================================================
Select one of the items above.
[q,number]
=> 1

  7. At the prompt for installation confirmation, enter "y".

    Preparing installation.
Please wait for a while.
Systemwalker Runbook Automation ( Management Server )
Start the installation?
[y,n]
=> y

  8. Select the installation type. To perform a Custom Installation, enter "2".

    === Select Installation Type ===
Input Installation Type
1:Standard installation
2:Custom installation
[ENTER:1]
=> 2

  9. Specify the installation directory for the CMDB database.

    === Storage folder for CMDB Manager database  ===
Input Installation folder of the CMDB manager's data base
[ENTER:/var/opt]
=>

  10. Set the following port numbers used by Systemwalker Runbook Automation:

    • Port number for the Interstage Management Console

    • Port number for the Web server (Interstage HTTP Server)

    • Port number for the CORBA Service

    • Port number for the HTTP listener

    • Port number for IIOP

    • Port number for IIOP_SSL

    • Port number for IIOP_MUTUALAUTH

    • Port number for JMX_ADMIN

    Enter the port numbers, or press Enter key at each prompt to use the existing value.

    === Systemwalker Runbook Automation port  ===
Input Port number of Interstage Management Console
[ENTER:12000]
=>

=== Systemwalker Runbook Automation port  ===
Input Port number of Web server (Interstage HTTP Server)
[ENTER:80]
=>

=== Systemwalker Runbook Automation port  ===
Input Port number of CORBA service
[ENTER:8002]
=>

=== Systemwalker Runbook Automation port  ===
Input Port number of HTTP Listener
[ENTER:28080]
=>

=== Systemwalker Runbook Automation port  ===
Input Port number of HTTP Listener for Operation Management
[ENTER:12001]
=>

=== Systemwalker Runbook Automation port  ===
Input Port number of IIOP
[ENTER:23600]
=>

=== Systemwalker Runbook Automation port  ===
Input Port number of IIOP_SSL
[ENTER:23601]
=>

=== Systemwalker Runbook Automation port  ===
Input Port number of IIOP_MUTUALAUTH
[ENTER:23602]
=>

=== Systemwalker Runbook Automation port  ===
Input Port number of JMX_ADMIN
[ENTER:8686]
=>

    Note

    • Do not specify port numbers currently used. To check which port numbers are currently used:

      # netstat -a -n

    • Even port numbers not displayed by the command above might be in use by another application. Refer to "9.1 Port Numbers" for information on how to check that the port number is not being used.

    • There is no confirmation for port number on the environment which installed Systemwalker Service Catalog Manager. Use same port number which you specified when you installed Systemwalker Service Catalog Manager

  11. Set the subsystem number and port number that will be used by Scheduling.

    • If the default port number used by the schedule function is already used by another application, specify a different port number.

    If you do not have Systemwalker Operation Manager coexist on the Management Server, or if the default port number is not used by another application, leave the default settings unchanged, and press the Enter key.

    === Systemwalker Runbook Automation Advanced Setup for Scheduling  ===
Input Subsystem Number
[ENTER:9]
=> 

=== Systemwalker Runbook Automation Advanced Setup for Scheduling  ===
Input Port Number of Job Scheduler
[ENTER:9690]
=> 

=== Systemwalker Runbook Automation Advanced Setup for Scheduling  ===
Input Port Number of Job Execution Control
[ENTER:9691]
=>

    Note

    • The port number that is currently being used can be checked using the following command. Do not specify the port number that is displayed by this command.

      # netstat -a -n

    • Although the specified port number is not currently in use, it may already have been assigned to other software. Refer to "9.1 Port Numbers" to check that the port number has not already been used.

  12. Check the installation settings.

    Ensure that the settings are correct, and then enter "y". If a setting must be corrected, then enter its number.

    '=== Select Installation Type ===
1.Installation Type: Custom installation
=== Installation Directory  ===
Program deployment destination(This cannot be changed): /opt
Setup files deployment destination(This cannot be changed): /etc/opt
Work files deployment destination(This cannot be changed): /var/opt
=== CMDB Manager database directory  ===
2.CMDB Manager database directory: /var/opt
=== Systemwalker Runbook Automation port  ===
3.Port number of Interstage Management Console: 12000
4.Port number of Web server (Interstage HTTP Server): 80
5.Port number of CORBA service: 8002
6.Port number of HTTP Listener: 28080
7.Port number of HTTP Listener for Operation Management: 12001
8.Port number of IIOP: 23600
9.Port number of IIOP_SSL: 23601
10.Port number of IIOP_MUTUALAUTH: 23602
11.Port number of JMX_ADMIN: 8686
=== Systemwalker Runbook Automation Advanced Setup for Scheduling  ===
12.Subsystem Number: 9
13.Port number of Job Scheduler: 9690
14.Port number of Job Execution Control: 9691

Is it OK to install by this settings? To change an item input the item number.
[y,q,number]
=> y

Installation will start

    Note

    If the environment which Systemwalker Service Catalog Manager has been installed, the port number is not displayed.

  13. The message below will be displayed.

    Installing...

Systemwalker Runbook Automation ( Management Server ) is being installed now.
    100% ##############################

  14. Installation will complete.

    At the prompt for system restart enter "y".

    Systemwalker Runbook Automation ( Management Server ) install completed.
The system must be restarted to complete the installation. Restart the system now?
[y,n]
=>
PreviousNext
Copyright 2010-2012 FUJITSU LIMITED