To install the Manager, design and check the following parameters in advance.
Default values are listed for some of the parameters in the following table ("Parameters specified during installation"). For these parameters, it is recommended that the default values be used.
Parameters specified during installation
Item No. | Window | Input item | Description |
|---|---|---|---|
1 | Select the installation folder. | Installation Folder | This is the installation folder for this product. (*1) Default value: C:\Fujitsu The installation folder must be specified using no more than 10 characters long, including the driver letter and the "\" symbol. |
2 | Administrative User Creation | User Account | This is the name of the user account for logging into this product as a privileged user. |
Password | This is the password for the privileged user. | ||
(Retype password) | |||
3 | Admin LAN Selection | Network to use the admin LAN | This is the network to be used as admin LAN. This network can be selected from a list box. |
4 | Admin LAN Selection | Folder containing the LAN Manager module | This is the folder that was expanded in "Download and extract the Microsoft LAN Manager" under "Downloading and Setting up the Required Software". |
5 | Port number setting | The port number of the namangement function | This is the port number used by the management function of this product. Default value: 8013 |
The port number of the database | This is the port number of the database for this product. Default value: 5438 | ||
6 | Environment settings for mailing function | Host name or IP address for SMTP server | This is the host name or IP address that was verified in "Checking the SMTP server". |
Port number for SMTP server | This is the port number of the SMTP server. Default value: 25 | ||
Sender address | This is the sender email address (the "from" address) when email is sent. | ||
7 | Port number setting | Interstage Management Console | This is the port number of the Interstage Management Console. Default value: 12000 |
Web server (Interstage HTTP Server) | This is the port number of the Web server. Default value: 80 | ||
CORBA Service | This is the port number of the CORBA Service used by this product. Default value: 8002 | ||
8 | Select the installation folder for CMDB. | Installation folder for CMDB Manager database | This is the installation folder for the CMDB of this product. Default value: C:\Fujitsu\Systemwalker\CMDB |
9 | Setting user password | User password / | This is the password for the user ("swrbadbuser") that is required to start Job Execution Control. (*2) |
(Retype Password) | |||
10 | Setting user password | User password | This is the password for the user ("swrbajobuser") that is required to start the process management database. (*2) |
(Retype Password) | |||
11 | Admin server settings | FQDN for the admin server | This is the host name that was verified in "Checking the host name". |
12 | Portal server settings | Port number of the cloud portal server | This is the port number of the portal server used by this product. Default value: 3500 |
13 | Database settings | Port number of the database for user management | This is the port number of the user management database for this product. Default value: 5440 |
Port number of the database for access control | This is the port number of the access control database for this product. Default value: 5439 | ||
Port number of the database for accounting | This is the port number of the accounting database for this product. Default value: 5441 | ||
Port number of the database dashboard | This is the port number of the database for the cloud infrastructure administrator dashboard. Default value: 5442 | ||
14 | Interstage single sign-on SSO repository settings | FQDN of the SSO repository server | This is the FQDN of the SSO repository used by Interstage Single Sign-On. For the FQDN of the SSO repository, use the FQDN of the Admin Server. The FQDN must be no more than 256 characters long, and it must be possible to resolve the name. |
Port number of the SSO repository server | This is the port number of the SSO repository. Default value: 389 | ||
Administrator's DN of the SSO repository server | This is the administrator DN of the SSO repository. Default value: cn=manager,ou=interstage,o=fujitsu,dc=com | ||
Administrator's passowrd for the SSO repository | The password for the administrator DN of the SSO repository must be no more than 128 characters, including alphanumeric characters, commas (",'), plus signs ("+") or equals signs ("="). | ||
(Retype password) | |||
15 | Authentication server settings | FQDN of the authentication server | This is the FQDN of the authentication server used by this product. For the FQDN of the authentication server, use the FQDN of the Admin Server. The FQDN must be no more than 256 characters long, and it must be possible to resolve the name. |
Port number of the authentication server | This is the port number of the authentication server. Default value: 10443 | ||
16 | User management settings | Enable user management by user department
| If user management is to be performed by the user department, select "on". If user management is to be performed by the provider department administrator, select "off". |
17 | MyPortal settings | Allow the service specification modification | This checkbox must be selected if changes to the service specifications are allowed. |
18 | MyPortal settings | Enable application process | This checkbox must be selected if application processes are enabled. |
19 | MyPortal settings | Application process to be used | When Application process is enabled, a window is displayed to select the application to be used. Select the required checkbox to use the following application processes:
Initial value: Default |
20 | MyPortal settings | Select the application process settings. | After the above window, another window appears. Select the checkbox to choose the timing of the application process:
|
21 | CMDB and Interstage Bussiness Process Manager Analytics settings | Port number of CMDB and BPM-A | This is the port number of Interstage Business Process Analytics and the CMDB used by this product. Default value: 80 |
22 | Virualization software settings | Type of virtualization software
| This is the virtualization software that is installed on Managed Servers. A checkbox for virtualization software must be selected according to the environment used. |
*1: Install the Manager on an NTFS format disk.
*2: Password settings for "swrbajobuser" and "swrbaduser"
An error will occur with the installation processing if either "swrbajobuser" or "swrbaduser" (or both) have been registered already. In this case, delete the user(s) that caused the error (either "swrbajobuser" or "swrbaduser" or both), and then perform the installation again.
The strings that can be specified for passwords must start with a letter or number and be between 1 and 250 characters long. Also, the following characters cannot be used in passwords:
\ (backslash)
" (double quote)
Spaces
Tab character.
Depending on the security policy settings for the operating system, a certain degree of complexity may be demanded for the strings that can be used as passwords. With the default settings for Windows 2008, in particular, a fairly high degree of complexity is demanded for the strings that can be used as passwords.
Specify a password, taking the following rules into account:
The password must not contain all or part of the user name ("swrbajobuser" or "swrbadbuser").
The password must contain at least one letter, at least one number and at least one symbol
Passwords must be at least eight characters long.
*3: To adopt the default value, simply press the <Enter> key without entering any values.
Cautions Prior to Installing
If a terminal server is installed, execute the following command to change the terminal service to install mode:
CHANGE USER /INSTALL
Installation
Use the following procedure to install the Manager.
Log in with Administrator privileges.
Start the installer.
The installer will start automatically when the DVD-ROM(DISK1) is inserted in the DVD drive. If the installer does not start automatically, start it manually by executing cimssetup.exe.
Click "Instrallation of Admin Serevr function".
Thereafter, proceed with the installation by entering the parameters that were designed and verified in "Parameters specified during installation" as appropriate, in accordance with the instructions displayed in the installation wizard.
When prompted, insert the DVD-ROM(DISK2) or the DVD-ROM(DISK3) to DVD drive to proceed installation.
Note
If the installation fails, restart the system and then log in again as the same user that performed the installation. Then, uninstall the product according to the uninstallation procedure.
After uninstalling the product, eliminate the cause of the failure by referring to the meaning and action method for the message that was output, and then install the product again.
Notes on the Post-installation Procedure
If a terminal server is installed, execute the following command to change the terminal service to execute mode:
CHANGE USER /EXECUTE
The following user is added:
User name | swrbadbuser |
swrbadbuser is the OS account used to start the process management database service. Do not delete this account while CIMS is still installed.
