The messages that provide information to users are explained in the following sections.
Information
The 21XXX messages (XXX is any number) are displayed in the event log of the Client window.
In an environment where the Manager and Agent are operated in the same server, messages output from this software to the system log are also displayed in the event log of the Client window.
Description
The state of the managed server node server_name has been changed to status.
status contains the following states: "normal", "stop", and "unknown".
Corrective action
Check the state status of the managed server node server_name. If the state shown is not "normal", locate the fault using the Client window.
See
For details of operation from the Client window, refer to "Chapter 8 Maintenance of Devices to be Managed" in the ETERNUS SF Storage Cruiser User's Guide.
Description
Registration of the managed server node server_name has been completed.
Corrective action
No action is required.
Description
The state of the service service_name has been changed to status.
status contains the following states: "normal", "stop", and "unknown".
Corrective action
No action is required.
Description
The Manager has been started.
Corrective action
No action is required.
Description
The Manager has been started.
Corrective action
No action is required.
Description
Information of the login account login_account has been updated.
Corrective action
If the other clients are logged in to from the login account login_account, restart the clients.
Description
The cluster setup on the primary node ended normally.
Corrective action
Proceed to the next operation according to the cluster environment configuration procedure.
Description
The cluster setup on the secondary node ended normally.
Corrective action
Proceed to the next operation according to the cluster environment configuration procedure.
Description
The cluster deletion on the primary node ended normally.
Corrective action
Proceed to the next operation according to the cluster environment configuration procedure.
Description
The cluster deletion on the secondary node ended normally.
Corrective action
Proceed to the next operation according to the cluster environment configuration procedure.
Description
The command was canceled.
Corrective action
No action is required.
Description
The shared disk data deletion was completed.
Corrective action
If any node where the cluster environment is not deleted exists, delete the cluster environment in force mode (using -f when executing rcx_clunsetup). After the deletion is completed, uninstall the Manager.
Description
The cluster unsetup in force mode was completed.
Corrective action
Uninstall the Manager.
Description
The command command was canceled.
rcxcert is displayed for command.
Corrective action
No action is required.
Description
The command command terminated normally.
rcxcert is displayed for command.
Corrective action
No action is required.
Description
The CLI encrypted password key has successfully been changed through use of the command command.
rcxcert is displayed for command.
Corrective action
No action is required.
Description
The command command_name1 was successfully completed.
Corrective action
No action is required.
Description
A test report trap was issued.
Corrective action
No action is required.
Description
ServerRM daemon has been started.
Corrective action
No action is required.
Description
ServerRM daemon has been stopped.
Corrective action
No action is required.
Description
SNMP trap daemon has been started.
Corrective action
No action is required.
Description
SNMP trap daemon has been stopped.
Corrective action
No action is required.
Description
The message indicates that a test event was executed.
Corrective action
No action is required.
Description
This message indicates that the LED for specifying a device is on.
Corrective action
No action is required.
Description
This message indicates that the LED for specifying a device is off.
Corrective action
No action is required.
If the LED is already on or blinking due to an operation other than the LED turning on operation, the LED may not turn off when it is returned to its original status.
