E.3 VSC Engine

This appendix describes the VSC Engine codes.

Table E.3 List of VSC Engine Codes
Code (Hexadecimal)	Explanation	Action
0001	VSC Engine received an undefined command code.	Confirm that the first 4 digits in the Version field of firmware in the "Maintenance" window are "0102". If they are not "0102", ask the Fujitsu engineer (CE) to change the version number of firmware. Upon confirming "0102", see "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0002	VSC Engine detected the following errors in the command received: Command length Command format	Confirm that the first 4 digits in the Version field of firmware in the "Maintenance" window are "0102". If they are not "0102", ask the Fujitsu engineer (CE) to change the version number of firmware. Upon confirming "0102", see "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0003	VSC Engine detected the following error in the command received: Command version	Confirm that the first 4 digits in the Version field of firmware in the "Maintenance" window are "0102". If they are not "0102", ask the Fujitsu engineer (CE) to change the version number of firmware. Upon confirming "0102", see "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0004	VSC Engine detected an argument error in the command received.	Confirm that the first 4 digits in the Version field of firmware in the "Maintenance" window are "0102". If they are not "0102", ask the Fujitsu engineer (CE) to change the version number of firmware. Upon confirming "0102", see "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0010	VSC Engine received a command with an invalid transaction ID.	Confirm that the first 4 digits in the Version field of firmware in the "Maintenance" window are "0102". If they are not "0102", ask the Fujitsu engineer (CE) to change the version number of firmware. Upon confirming "0102", see "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0012	VSC Engine received events that exceeded the maximum number allowed within a transaction.	Confirm that the first 4 digits in the Version field of firmware in the "Maintenance" window are "0102". If they are not "0102", ask the Fujitsu engineer (CE) to change the version number of firmware. Upon confirming "0102", see "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0020	VSC Engine received an I/O error report from storage while processing the command received.	An error has occurred in storage containing the physical disk registered in the virtual storage pool. Investigate the storage.
0021	VSC Engine received an error report from XPathOS while processing the command received.	Check for any error in the virtualization switch. If no error occurred, see "6.3 Collecting Data" to collect investigation data about VSC Engine. Then contact your Fujitsu engineer (CE or SE).
0022	Memory assignment failed while VSC Engine was processing the command received.	See "6.3 Collecting Data" to collect investigation data about VSC Engine. Then contact your Fujitsu engineer (CE or SE).
0023	VSC Engine detected an error (internal conflict) while processing the command received.	See "6.3 Collecting Data" to collect investigation data about VSC Engine. Then contact your Fujitsu engineer (CE or SE).
0030	VSC Engine failed to detect the specified physical disk.	Confirm that the physical disk specified in "Register Physical Disk" or "Create Virtual Disk" is correct. See "3.4.1.1 Using the zoning function of a virtualization switch" to confirm that zoning between the virtual initiator of the virtualization switch and the storage is correct. Make sure that the WWN for the virtual initiator of any other virtualization switch is not registered, and that the WWN of the channel adaptor (CA) connected to the other virtualization switch is not registered.
0031	VSC Engine attempted to perform I/O operation on the specified physical disk, but storage was not ready.	Confirm that the storage containing the physical disk specified in "Register Physical Disk" or "Create Virtual Disk" is turned on, and that the FC cable from the virtualization switch to storage is correctly connected. When using the host table setting (affinity setting), confirm that the WWNs for the virtual initiator of the virtualization switch registered to storage and zoning are correct. (See "3.4.1.2 Using the host table settings mode of ETERNUS and GR.")
0032	The specified physical disk is storage not supported by VSC Engine.	Confirm that the physical disk specified in "Register Physical Disk" or "Create Virtual Disk" is in VSC Engine-supported storage.
0033	VSC Engine attempted to perform I/O operation on the specified physical disk, but Busy status was returned from storage.	Busy status was returned from storage containing the physical disk specified in "Register Physical Disk" or "Create Virtual Disk". Wait a while and retry operation.
0044	VSC Engine detected an error in the transaction sequence. (An attempt to manipulate the object with the specified transaction ID failed.)	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0045	VSC Engine detected a communication error while communicating with a remote VSC Engine in redundant configuration via a network.	Confirm that the virtualization switch constituting the redundant configuration is turned on. Also, check for any problems, such as disconnected Ethernet cable. Then contact your Fujitsu engineer (CE or SE).
0046	In a redundant configuration, one VSC Engine detected that its version is inconsistent with that of the other VSC Engine.	Referring to "6.3 Collecting Data", collect investigation data about VSC Engine. Then contact your Fujitsu engineer (CE or SE).
0050	VSC Engine was blocked for some reason.	See "6.3 Collecting Data" to collect investigation data about VSC Engine. Then contact your Fujitsu engineer (CE or SE). Then, turn on the virtualization switch.
0110	VSC Engine detected the following condition while checking the storage connection: Detected more channel adapters than those allowed in storage connectable to the virtualization switch.	For the number of channel adapters of storage connectable to a virtualization switch, see "D.3 Storage Connected to a Virtualization Switch." Review the system configuration.
0111	A physical disk with a capacity that is outside the range of capacities supported by the VSC engine has been detected.	Check whether there are any physical disks whose size exceeds the “Maximum physical disk size” as defined in "Appendix D Limit Values".
0112	A physical disk that is not supported by the VSC engine has been detected.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0200	VSC Engine detected the following error while creating a virtual target: The specified WWN is reserved by VSC Engine. (It is not available to the user.)	Check whether the first four digits in the firmware version column in the "Maintenance" window are "0102". If the digits are not "0102", ask your Fujitsu engineer (CE) to change the firmware version. If the digits are "0102", see "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0201	VSC Engine detected the following error while creating a virtual target: The specified WWN is already assigned to the virtual target.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0202	VSC Engine detected the following condition while creating a virtual target: An attempt is made to create more virtual targets than allowed in a virtual enclosure.	For the number of virtual targets that can be created in a virtual enclosure, see "D.1 Virtual Storage Resources".
0203	VSC Engine detected the following condition while creating a virtual target: An attempt was made to create more virtual targets than can be created in a virtualization switch.	See "D.1 Virtual Storage Resources" for the number of virtual targets that the virtualization switch can create.
0300	VSC Engine detected the following error while creating a virtual disk: The specified virtual disk already exists.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0301	VSC Engine detected the following error while creating a virtual disk: The RAID type of physical disk specified as a component configuring the virtual disk and that of the actual physical disk do not match.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0302	VSC Engine detected the following error while creating a virtual disk: The specified virtual disk capacity and total capacity of all physical disks specified to constitute the virtual disk do not match.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0303	VSC Engine detected the following conditions while creating a virtual disk: The number of physical disks configuring the virtual disk exceeded the maximum number. The number of extents configuring the virtual disk exceeded the maximum number.	See "D.1 Virtual Storage Resources" for the maximum numbers and extents of physical disks that constitute a virtual disk. Change the physical disks configuring the virtual disk.
0305	VSC Engine detected the following error while creating a virtual disk: The number of mirrors specified as components configuring the virtual disk exceeded the specified value.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0306	VSC Engine detected the following error while creating a virtual disk: The number of mirrors specified as components configuring the virtual disk and that of the actually specified physical disks do not match.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0307	VSC Engine detected the following error while creating a virtual disk: The area of the physical disk specified as components configuring the virtual disk is already assigned to another one.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0308	VSC Engine detected the following condition while creating a virtual disk: An attempt was made to create more virtual disks than can be created.	See "D.1 Virtual Storage Resources" for the number of virtual disks that can be created.
0309	VSC Engine detected the following condition while creating a virtual disk: The number of multi-paths connectable to one virtual disk exceeded the maximum number.	See "D.1 Virtual Storage Resources" for the number of multi-paths of a virtual disk that the virtualization switch can create.
0310	VSC Engine detected the following condition while checking the physical disks and creating a virtual disk: An attempt was made to register more physical disks than the number of physical disks that can be registered with one virtualization switch.	For the number of physical disks that can be used by a virtualization switch, see "D.1 Virtual Storage Resources".
0320	VSC Engine detected the following error while checking the specified WWN: There is no virtual target with the specified WWN.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0400	VSC Engine detected the following error while setting shared information of the virtual disk: The specified virtual disk does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0401	VSC Engine detected the following errors while setting shared information of the virtual disk: The specified virtualization switch does not exist. There is no redundant configuration with the specified virtualization switch.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0402	VSC Engine detected the following error while setting shared information of the virtual disk: The number of shared information items of the virtual disk is incorrect.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0403	VSC Engine detected the following error while setting shared information of the virtual disk: All composition data held by each of the multiple virtualization engines, that constitute the redundant configuration, does not match.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0404	VSC Engine detected the following condition while setting shared information of the virtual disk: The specified virtual disk is in the process of migration or replication.	Perform the operation after migration or replication is completed.
0405	VSC Engine detected the following condition while setting shared information of the virtual disk: The specified virtual disk cannot be used because the status of physical disks configuring the virtual disk is being checked.	Wait for a while and then perform the operation. Physical disks configuring the virtual disk may not be ready for such reason as the storage configuring the virtual disk not being turned on. Confirm that the storage containing the physical disks is turned on and that the FC cable from the virtualization switch to the storage is correctly connected.
0600	VSC Engine detected the following error while assigning the virtual disk to the virtual target: The specified virtual disk does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0601	VSC Engine detected the following error while assigning the virtual disk to the virtual target: The specified virtual disk is already assigned to another virtual target.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0602	VSC Engine detected the following error while assigning the virtual disk to the virtual target: The specified virtual target does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0603	VSC Engine detected the following error while assigning the virtual disk to the virtual target: Another virtual disk is already assigned to the specified virtual target LUN.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0604	VSC Engine detected the following error while assigning the virtual disk to the virtual target: The specified LUN is incorrect.	See "6.3 Collecting Data" collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0605	VSC Engine detected the following condition while assigning the virtual disk to the virtual target: An attempt was made to assign more virtual disks than the maximum number assignable to the specified virtual target.	See "D.1 Virtual Storage Resources" to check the number of virtual disks assignable to a virtual target.
0607	VSC Engine detected the following error while assigning the virtual disk to the virtual target: The backup disk created in migration processing is specified.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0608	VSC Engine detected the following condition while assigning the virtual disk to the virtual target: The specified virtual disk cannot be used because the status of physical disks configuring the virtual disk is being checked.	Wait a few minutes and then perform the operation. Physical disks configuring the virtual disk may not be ready for such reason as the storage configuring the virtual disk not being turned on. Confirm that the storage containing the physical disks is turned on and that the FC cable from the virtualization switch to the storage is correctly connected.
0609	VSC Engine detected the following condition while assigning the virtual disk to the virtual target: The specified virtual disk is in the process of migration or replication.	Perform the operation after migration or replication is completed.
0610	VSC Engine detected the following error: The specified parameter is invalid.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
0611	VSC Engine detected the following error: The specified parameter is invalid.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
1100	VSC Engine detected the following error while adding capacity to the virtual disk: The specified virtual disk does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
1102	VSC Engine detected the following error while adding capacity to the virtual disk: After adding capacity, that of the virtual disk and the total capacity of all physical disks configuring the virtual disk do not match.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
1103	VSC Engine detected the following conditions while adding capacity to the virtual disk: The number of physical disks configuring the virtual disk exceeded the maximum number. The number of extents configuring the virtual disk exceeded the maximum number.	See "D.1 Virtual Storage Resources" for the maximum numbers of physical disks and extents that constitute a virtual disk.
1104	VSC Engine detected the following condition while adding capacity to the virtual disk: The number of physical disks configuring the virtual disk added to increase the capacity and information for the physical disks do not match.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
1106	VSC Engine detected the following error while adding capacity to the virtual disk: The number of mirrors specified as components configuring the virtual disk and that of the actually specified physical disks do not match.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
1107	VSC Engine detected the following condition while adding capacity to the virtual disk: An error was detected after adding capacity and while changing information for the virtual disk.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
1108	VSC Engine detected the following condition while adding capacity to the virtual disk: An error was detected while information about the virtual disk before capacity was added was being deleted.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
1109	VSC Engine detected the following condition while adding capacity to the virtual disk: The number of multi-paths exceeded that connectable to one virtual disk.	See "D.1 Virtual Storage Resources" for the number of multi-paths of a virtual disk that the virtualization switch can create.
1110	VSC Engine detected the following condition while adding capacity to the virtual disk: The specified virtual disk is in the process of migration or replication.	Perform the operation after migration or replication is completed.
1111	VSC Engine detected the following condition while adding capacity to the virtual disk: The specified virtual disk cannot be used because the status of physical disks configuring the virtual disk is being checked.	Wait for a while and then perform the operation. Physical disks configuring the virtual disk may not be ready for such reason as the storage configuring the virtual disk not being turned on. Confirm that the storage containing the physical disks is turned on and that the FC cable from the virtualization switch to the storage is correctly connected.
2100	VSC Engine detected the following error while deleting virtual disks from the virtual target: The specified virtual target does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
2101	VSC Engine detected the following error while deleting virtual disks from the virtual target: A specified virtual disk does not exist in the specified virtual target.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
2102	VSC Engine detected the following condition while deleting virtual disks from the virtual target: The specified virtual disk is in the process of migration or replication.	Perform the operation after migration or replication is completed.
2300	VSC Engine detected the following error while deleting the virtual disk: The specified virtual disk does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
2301	VSC Engine detected the following error while deleting the virtual disk: The specified virtual disk is assigned to the virtual target.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
2302	VSC Engine detected the following condition while deleting the virtual disk: The specified virtual disk is in the process of migration or replication.	Perform the operation after migration or replication is completed.
2303	VSC Engine detected the following error while deleting the virtual disk: The specified virtual disk is assigned to a virtual target on another virtualization switch constituting a redundant configuration.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
2400	VSC Engine detected the following error while deleting the virtual target: The specified virtual target does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
2401	VSC Engine detected the following error when deleting the virtual target: A virtual disk is still assigned to the specified virtual target.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
2402	VSC Engine detected the following error when deleting the virtual target: The user has attempted to delete a virtual target where HP-UX has been specified as the operating system used.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3100	VSC Engine detected the following errors when starting migration or replication: The virtual disk specified for migration does not exist. The virtual disk specified as the replication source does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3101	VSC Engine detected the following errors when starting migration or replication: The virtual disk specified for migration does not exist. The virtual disk specified as the replication destination does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3102	VSC Engine detected the following error when starting migration or replication: The migration destination is incorrectly specified.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3103	VSC Engine detected the following error when starting migration or replication: The processing code is incorrect.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3104	VSC Engine detected the following error when starting migration or replication: The priority is incorrect.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3105	VSC Engine detected the following condition when starting migration or replication: No session ID was assigned.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3106	VSC Engine detected the following error when starting migration or replication: Migration or replication with the specified session ID already exists.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3107	VSC Engine detected the following error when starting migration or replication: The replication source virtual disk and replication destination virtual disk are the same.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3108	VSC Engine detected the following conditions when starting migration or replication: Failed to associate the source and destination of migration. Failed to associate the source and destination of replication.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3109	VSC Engine detected the following error when starting migration or replication: The replication destination virtual disk is already assigned to the virtual target.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3110	VSC Engine detected the following conditions when starting migration or replication: The area of the migration destination overlaps with that of the destination of other migration or replication. The area of replication destination overlaps with that of the destination of other migration or replication. Another replication is operating in the migration conversion destination area.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3111	VSC Engine detected the following condition when starting migration or replication: Failed to create a work virtual disk for migration or replication.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3112	VSC Engine detected the following error when starting migration or replication: The specified session does not exist in migration or replication.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3113	VSC Engine detected the following condition when starting migration or replication: A conflict was detected in internal management information.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3114	VSC Engine detected the following conditions when starting migration or replication: The virtual disk specified as the migration source cannot be used because the status of physical disks configuring the virtual disk is being checked. The virtual disk specified as the replication source cannot be used because the status of physical disks configuring the virtual disk is being checked.	Wait a few minutes and then perform the operation. Physical disks configuring the virtual disk may not be ready for such reason as the storage configuring the virtual disk not being turned on. Confirm that the storage containing the physical disks is turned on and that the FC cable from the virtualization switch to the storage is correctly connected.
3115	VSC Engine detected the following conditions when starting migration or replication: The storage containing the physical disk specified as the migration destination is not ready. The virtual disk specified as the replication source cannot be used because the status of physical disks configuring the virtual disk is being checked.	Wait for a while and then perform the operation. Physical disks configuring the virtual disk may not be ready for such reason as the storage configuring the virtual disk not being turned on. Confirm that the storage containing the physical disks is turned on and that the FC cable from the virtualization switch to the storage is correctly connected.
3116	VSC Engine detected the following condition when starting migration or replication: The physical disks configuring the virtual disk before migration and those specified as the migration destination do not have matching path connection configurations. For example, paths from all virtualization switches constituting a redundant configuration are connected to the physical disks configuring the virtual disk before migration, but are connected to the virtual disks after migration from only some parts of the virtualization switches.	Check the system configuration. The path configuration (FC cable connection between the virtualization switch and storage) of the physical disks configuring the virtual disk before migration and that of the physical disks for the migration destination must be identical. The path connection configurations must be identical (including the virtualization switch constituting the redundant configuration).
3117	VSC Engine detected the following condition when starting migration or replication: An attempt was made to perform more migration or replication processes than simultaneously possible.	See "D.1 Virtual Storage Resources" for simultaneously performing multiple copy operations.
3118	VSC Engine detected the following condition when starting migration or replication: The specified migration process failed to exclude other migration or replication processes.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client.
3119	The VSC engine has detected the following status when starting migration or replication: An attempt was made to execute a migration or replication process in excess of the maximum simultaneous multiple processes for one virtual disk.	The maximum simultaneous multiple processes for one virtual disk is 4. Check the number of migration and/or replication processes simultaneously executed.
3200	VSC Engine detected the following error when starting migration: The virtual disk specified for migration does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client.
3201	VSC Engine detected the following error when starting migration: The virtual disk specified for migration does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3202	VSC Engine detected the following error when starting migration: The migration destination is incorrectly specified.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3203	VSC Engine detected the following error when starting migration: The disk type of virtual disk specified for migration is incorrect.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3204	VSC Engine detected the following error when starting migration: The capacity of the physical disk specified as the migration destination is incorrect.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3205	VSC Engine detected the following error when starting migration: The configuration of the physical disk specified as the migration destination is incorrect.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3206	VSC Engine detected the following conditions in the virtual disk configuration after starting migration: The number of physical disks configuring the virtual disk exceeded the maximum number. The number of extents configuring the virtual disk exceeded the maximum number of those of physical disks configuring the virtual disk.	See "D.1 Virtual Storage Resources" for the maximum number and extents of physical disks configuring a virtual disk.
3300	VSC Engine detected the following errors while acquiring the status of migration or replication: The virtual disk specified for migration does not exist. The virtual disk specified as the replication source does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3301	VSC Engine detected the following errors while acquiring the status of migration or replication: The virtual disk specified for migration does not exist. The virtual disk specified as the replication destination does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3302	VSC Engine detected the following error while acquiring the status of migration or replication: The migration destination is incorrectly specified.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3400	VSC Engine detected the following errors while canceling migration or replication: The virtual disk specified for migration does not exist. The virtual disk specified as the replication source does not exist. VTLUN of the migration source does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3401	VSC Engine detected the following errors while canceling migration or replication: The virtual disk specified for migration does not exist. The virtual disk specified as the replication destination does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3402	VSC Engine detected the following error while canceling migration or replication: The migration destination is incorrectly specified.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3403	VSC Engine detected the following error while canceling migration or replication: The processing code is incorrect.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3500	VSC Engine detected the following errors when stopping access from the host of the virtual disk: The virtual disk specified for migration does not exist. The virtual disk specified as the replication source does not exist. VTLUN of the migration source does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3501	VSC Engine detected the following conditions when stopping access from the host of the virtual disk: The virtual disk specified as the migration source cannot be used because the status of physical disks configuring the virtual disk is being checked. The storage containing the physical disk specified as the migration destination is not ready. The virtual disk specified as the replication source cannot be used because the status of physical disks configuring the virtual disk is being checked. The virtual disk specified as the replication source cannot be used because the status of physical disks configuring the virtual disk is being checked.	Wait a few minutes and then perform the operation. Physical disks configuring the virtual disk may not be ready for such reason as the storage configuring the virtual disk not being turned on. Confirm that the storage containing the physical disks is turned on and that the FC cable from the virtualization switch to the storage is correctly connected.
3600	VSC Engine detected the following errors while restarting access from the host of the virtual disk: The virtual disk specified for migration does not exist. The virtual disk specified as the replication source does not exist. VTLUN of the migration source does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3601	VSC Engine detected the following error while restarting access from the host of the virtual disk: The specified migration process failed to exclude other migration or replication processes.	Wait a few minutes and then perform the operation. If no improvement results, see "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3602	VSC Engine detected the following conditions while restarting access from the host of the virtual disk: The virtual disk specified as the migration source cannot be used because the status of physical disks configuring the virtual disk is being checked. The storage containing the physical disk specified as the migration destination is not ready. The virtual disk specified as the replication source cannot be used because the status of physical disks configuring the virtual disk is being checked. The virtual disk specified as the replication source cannot be used because the status of physical disks configuring the virtual disk is being checked.	Wait for a while and then perform the operation. Physical disks configuring the virtual disk may not be ready for such reason as the storage configuring the virtual disk not being turned on. Confirm that the storage containing the physical disks is turned on and that the FC cable from the virtualization switch to the storage is correctly connected.
3702	VSC Engine detected the following error while releasing the synchronized state: The specified session ID cannot be specified because the session was started from a transaction server.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3703	VSC Engine detected the following error while releasing the synchronized state: The migration destination is incorrectly specified.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3704	VSC Engine detected the following error while releasing the synchronized state: The specified session ID is currently being synchronized.	Perform the operation after being synchronized.
3800	VSC Engine detected the following error while finishing (detaching) migration: The virtual disk specified for migration does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3801	VSC Engine detected the following error while finishing (detaching) migration: The virtual disk specified for migration does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3802	VSC Engine detected the following error while finishing (detaching) migration: The migration destination is incorrectly specified.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3803	VSC Engine detected the following condition while finishing (detaching) migration: An error was detected from the virtual disk specified for migration while information for the physical disks configuring the virtual disk was being registered with the migration destination physical disks.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3804	VSC Engine detected the following condition while finishing (detaching) migration: An error was detected from the virtual disk specified for migration while information for the physical disk configuring the virtual disk before migration was being deleted.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3805	VSC Engine detected the following condition while finishing (detaching) migration: The specified session is still synchronized.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3900	VSC Engine detected the following error: There is no virtual disk with the specified virtual disk number.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3901	VSC Engine detected the following error: The virtual disk number (before being changed) is incorrect.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3902	VSC Engine detected the following error: A virtual disk with the virtual disk number (after being changed) already exists.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3903	VSC Engine detected the following condition: The specified virtual disk is in the process of migration or replication.	Perform the operation after migration or replication is completed.
3904	VSC Engine detected the following error: The specified virtual disk is already assigned to a virtual target of another virtualization switch constituting a redundant configuration.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3906	VSC Engine detected the following error: The specified virtual disk is assigned to the virtual target.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
3907	VSC Engine detected the following condition: The specified virtual disk cannot be used because the status of physical disks configuring the virtual disk is being checked.	Wait a few minutes and then perform the operation. Physical disks configuring the virtual disk may not be ready for such reason as the storage configuring the virtual disk not being turned on. Confirm that the storage containing the physical disks is turned on and that the FC cable from the virtualization switch to the storage is correctly connected.
3B00	VSC Engine detected the following error: The specified parameter is invalid.	Referring to "6.3 Collecting Data", collect investigation data concerning VSC Engine and VSC Manager. Then contact your Fujitsu engineer (CE or SE).
3C00	VSC Engine detected the following condition: The VS900 management area with the specified ID does not exist.	Referring to "6.3 Collecting Data", collect investigation data concerning VSC Engine and VSC Manager. Then contact your Fujitsu engineer (CE or SE).
3C01	VSC Engine detected the following condition: The VS900 management area with the specified ID already exists.	Referring to "6.3 Collecting Data", collect investigation data concerning VSC Engine and VSC Manager. Then contact your Fujitsu engineer (CE or SE).
3C02	VSC Engine detected the following condition: The specified physical disk area has already been allocated to another virtual disk or VS900 management area.	Referring to "6.3 Collecting Data", collect investigation data concerning VSC Engine and VSC Manager. Then contact your Fujitsu engineer (CE or SE).
3C03	VSC Engine detected the following condition: The VS900 management area to be deleted is being used in a copy session.	Perform the operation after migration processing or replication processing is complete.
3C04	VSC Engine detected the following condition: To delete a VS900 management area, an attempt was made to reallocate a VS900 management area but no usable VS900 management area was found.	For a session in which a VS900 management area cannot be reallocated, create another VS900 management area in the same switch group as that of the specified VS900 management area, then execute the command again. For a session in which a VS900 management area can be reallocated, create another VS900 management area in the same switch group as that of the specified VS900 management area, then execute the command again.
3C05	VSC Engine detected the following condition: Reallocating a VS900 management area to delete a VS900 management area failed.	Referring to "6.3 Collecting Data", collect investigation data concerning VSC Engine and VSC Manager. Then contact your Fujitsu engineer (CE or SE).
4400	VSC Engine detected the following error while acquiring a list of virtual disks: The specified virtual target does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
4600	VSC Engine detected the following error: The specified virtual disk does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
4700	VSC Engine detected the following error: The specified virtual disk does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
5100	VSC Engine detected the following error: The specified transaction already exists.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
5101	VSC Engine detected the following error: An attempt was made to generate more transactions than the maximum number that can be generated.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
5300	VSC Engine detected the following error: The specified transaction does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
5301	VSC Engine detected the following condition and was blocked: An error occurred while composition data was being reflected in the virtualization switch.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
5400	VSC Engine detected the following error: The specified transaction does not exist.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
5401	VSC Engine detected the following condition: An error occurred while an operation was being rolled back.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6100	VSC Engine detected the following condition: An error was reported from XPathOS.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6101	VSC Engine detected the following condition: No reply was returned from XPathOS after waiting the specified period of time.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6200	VSC Engine detected the following condition: Failed to perform command processing.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6201	VSC Engine detected the following condition: An error occurred at command processing startup.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6400	VSC Engine detected the following condition and was blocked: An error occurred while composition data was being reflected in the virtualization switch.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6500	VSC Engine detected the following error: The specified parameter is invalid.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6501	VSC Engine detected the following error: The specified parameter is invalid.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6502	VSC Engine detected the following condition: Copy security information failed to be set because a copy was running on the specified virtual enclosure	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6503	VSC Engine detected the following error: The value specified for the maximum number of copy sessions is invalid.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6504	VSC Engine detected the following error: The specified parameter is invalid.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6600	VSC Engine detected the following error: Copy security information failed to be deleted because there was no copy security information for the specified virtual enclosure.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6601	VSC Engine detected the following condition: Copy security information failed to be deleted because a copy was running on the specified virtual enclosure.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).
6700	VSC Engine detected the following error: The specified parameter is invalid.	See "6.3 Collecting Data" to collect investigation data about VSC Engine, VSC Manager, and the admin client. Then contact your Fujitsu engineer (CE or SE).