This appendix describes the messages output by the Virtual Storage Window.
Either English or Japanese messages are output as specified by environment variable LANG.
Messages from the Virtual Storage Window are output to the admin client window as dialogs.
Item | Description |
---|---|
Message text | Text of a message to be output. Each message is output in the following formats: Message ID "Message text (Japanese)" "Message text (English)" |
Explanation | Explains why this message is output. |
Message type | Indicates the message type. Information: Indicates the reason why to discontinue ongoing processing. Error: Indicates that processing cannot continue. Confirmation: Indicates confirmation before processing. Operation procedure: Prompts the input of necessary information for processing. Result notification: Reports the processing result. |
System processing | Explains the system processing after message output. |
User action | Explains the action to be taken in response to this message. |
ssgui4000
A network socket error occurred in communication with a VSC Manager.
Explanation
Communication with the admin server failed.
Message type
Error
System processing
Does not start the Virtual Storage Window.
User action
Confirm that the admin server is operating normally.
Also, confirm that the admin server is connected normally to the network.
ssgui4001
Failed to start Virtual Storage Window.
Explanation
An internal error was detected during Virtual Storage Window startup.
Message type
Error
System processing
Does not start the Virtual Storage Window.
User action
Collect the necessary data for troubleshooting and contact your Fujitsu service engineer (CE or SE).
ssgui4002
Failed to show the information.
Explanation
An internal error was detected during the display of information.
Message type
Error
System processing
Displays no information in the Virtual Storage Window.
User action
Collect the necessary data for troubleshooting and contact your Fujitsu service engineer (CE or SE).
ssgui4003
The virtualization switch is not registered. Please register it into the administrative server.
Explanation
Since the virtualization switch is not registered, stopped, under abnormal conditions, or the virtualization switch function is stopped, the Virtual Storage Window cannot request processing.
Alternatively, the information for VS900 is not entered correctly in the host's file of the administrative server.
Message type
Error
System processing
Rejects requests issued to the Virtual Storage Window.
User action
Verify that the virtualization switch is registered with ESC.
Verify that the virtualization switch is operating normally.
Verify that the virtualization function of switch is started.
Verify that the information for VS900 is entered correctly in the host's file of the administrative server.
ssgui4006
There is no information to display.
Explanation
Since there is no information to display, the Virtual Storage Window displays no information.
Message type
Information
System processing
Does not process requests.
User action
Create resources for virtual storage and retry processing.
ssgui4010
Failed to get the information.
Explanation
Failed to acquire data.
Message type
Error
System processing
Does not process requests.
User action
Collect the necessary data for troubleshooting and contact your Fujitsu service engineer (CE or SE).
ssgui4050
The web browser is not registered.
Explanation
Web browser is not registered.
Message type
Error
System processing
Cannot open the manual.
User action
Register a web browser.
ssgui4081
The disk type was changed. Before={0},After={1}
Explanation
No physical disks match the encryption attribute and disk type specified in the configuration conditions, therefore the disk type has been changed to one that a physical disk belongs to.
Parameters
0: The old disk type
1: The new disk type
Message type
Information
System processing
Does not process the request.
User action
Check whether there are any physical disks that match the encryption attribute and disk type that were specified in the configuration conditions.
ssgui4082
The encryption attribute was changed. Before={0},After={1}
Explanation
No physical disks match the encryption attribute and disk type that were specified in the configuration conditions, therefore the encryption attribute has been changed to one that a physical disk belongs to.
Parameters
0: Old encryption attribute
1: New encryption attribute
Message type
Information
System processing
Does not process the request.
User action
Check whether there are any physical disks that match the encryption attribute and disk type that were specified in the configuration conditions.
ssgui4099
The program error was detected.
Explanation
An internal error occurred in the Virtual Storage Window.
Message type
Error
System processing
Does not process requests.
User action
Collect the necessary data for troubleshooting and contact your Fujitsu service engineer (CE or SE).
ssgui4109
Are you sure you want to delete the virtual storage pool?
Explanation
This message confirms whether you want to delete the virtual storage pool.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4112
The virtual storage pool which can be deleted dose not exist.
Explanation
Either there are no virtual storage pools where a physical disk has not been registered, or there are no virtual storage pools associated with the specified switch group in the switch group selection.
Message
Information
System processing
Does not process requests.
User action
Release all the physical disks that are registered in the virtual storage pool you want to delete, or open the [Select Switch Group] window, and check whether the specified switch group is correct.
ssgui4116
Are you sure you want to release the physical disk?
Explanation
This message confirms whether you want to release the selected physical disk from the virtual storage pool.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4117
The physical disk which can be registered does not exist.
Explanation
There is no physical disk that can be registered in the virtual storage pool selected.
No storage device is registered. Alternatively, all the physical disks of storage devices have already been registered.
Message type
Information
System processing
Does not process requests.
User action
Use ESC to check whether a storage device to be used as virtual storage is registered.
In the View and Create window, check whether all physical disks are registered in the virtual storage pool.
ssgui4118
The physical disk which can be released does not exist.
Explanation
Every physical disk in the selected virtual storage pool constitutes a virtual disk.
Only a physical disk that does not constitute a virtual disk can be released.
Message type
Information
System processing
Does not process requests.
User action
Check the virtual storage pool for physical disks.
ssgui4121
Are you sure you want to convert?
Explanation
This message requests confirmation to execute batch conversion.
Message type
Confirmation
System processing
Waits until the reply button is clicked.
User action
Click the reply button.
ssgui4122
The physical disk of other storage is already selected.
Explanation
A physical disk belonging to another storage unit has already been selected.
All selected physical disks must belong to the same storage unit.
Message type
Information
System processing
Does not process requests.
User action
A physical disk cannot be selected from any storage unit other than the one to which the selected physical disk belongs.
To select a physical disk belonging to another storage unit, cancel the selections of all physical disks currently selected and select the physical disks again.
ssgui4123
The physical disk which can be converted does not exist.
Explanation
The selected virtual storage pool contains no physical disk that can be registered.
The storage unit may not be registered, or all physical disks in the storage unit may already be registered.
Message type
Information
System processing
Does not process requests.
User action
Using ESC, check whether the storage unit used for virtual storage is registered.
In the "View and Create" window, check whether all the physical disks are already registered in the virtual storage pool.
ssgui4124
The physical disk which is in agreement with the selected condition does not exist.
Explanation
No physical disks matched the selected condition when physical disks were being selected.
Message type
Information
System processing
Does not process requests.
User action
Select another condition when selecting physical disks.
ssgui4125
You cannot set the capacity with the selected condition.
Explanation
The capacity input in the physical disk selection conditions exceeds the total capacity of physical disks to be selected using the selected condition.
Message type
Information
System processing
Does not process requests.
User action
Select another RAID level and storage when selecting physical disks.
Alternatively, change the capacity.
ssgui4127
Is it good though security decreases when non-encryption volume exists together to the encryption volume?
Explanation
Confirm if you want to create the virtual disk even though the security level will deteriorate.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4211
The total assigned capacity is out of range.
Please select a physical disk to become a right capacity.
Explanation
The total capacity of the physical disks selected to create a virtual disk exceeds the permissible capacity of the virtual disk.
Message type
Information
System processing
Does not process requests.
User action
Select the physical disks and retry processing to set the total capacity within the permissible capacity of the virtual disk.
ssgui4215
The addition of capacity is not made to the virtual disk because it is created by the maximum capacity.
Explanation
You cannot add capacity to the virtual disk since maximum disk capacity has already been reached.
Message type
Information
System processing
Does not process requests.
User action
You cannot add capacity to the virtual disk.
ssgui4217
Are you sure you want to add capacity to the virtual disk?
Explanation
This message confirms whether you want to add capacity to the virtual disk.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4219
Are you sure you want to delete the virtual disk?
Explanation
This message confirms whether you want to delete the virtual disk.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4221
Are you sure you want to assign the virtual disk?
Explanation
This message confirms whether you want to assign the virtual disk to the virtual target.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4230
The inputted VTHL is already used.
Explanation
The input value is already used as VTHL.
Message type
Information
System processing
Does not process requests.
User action
Enter the value that is not used as VTHL and retry processing.
ssgui4231
The physical disk which is suitable for conditions does not exist.
Explanation
There is no suitable physical disk for the input conditions.
Message type
Information
System processing
Does not process requests.
User action
Change the input conditions and retry processing.
ssgui4233
The physical disk which can be added capacity to the virtual disk does not exist.
Explanation
There is no physical disk that can add capacity to the virtual disk.
Message type
Information
System processing
Does not process requests.
User action
Register a physical disk in the virtual storage pool to which the virtual disk belongs.
Alternatively, increase the amount of free space on a registered physical disk.
ssgui4236
The physical disk which can constitute the virtual disk does not exist.
Explanation
There is no suitable physical disk for the input conditions.
Message type
Information
System processing
Does not process requests.
User action
Register a physical disk in the virtual storage pool to which the virtual disk belongs.
Alternatively, increase the amount of free space on a registered physical disk.
ssgui4238
The virtual disk which can be assigned to and released from the virtual target does not exist.
Explanation
There is no virtual disk that can be assigned to and released from the virtual target.
Message type
Information
System processing
Does not process requests.
User action
Create virtual disks that can be assigned to the virtual target.
ssgui4239
This virtual disk cannot be changed VTHL because it is assigned to the other virtual target.
Explanation
The virtual disk is already assigned to another virtual target.
Message type
Information
System processing
Does not process requests.
User action
Change the VTHL after releasing the virtual disk from the other virtual target.
ssgui4240
The same VTHL is already used.
Explanation
A virtual disk of the same VTHL is already assigned.
Message type
Information
System processing
Does not process requests.
User action
Select another VTHL or change the assigned virtual disk VTHL.
ssgui4241
The number of VTHL to be assigned is insufficient.
Explanation
There is not sufficient VTHL to be assigned.
Message type
Information
System processing
Does not process requests.
User action
Reduce the number of virtual disks to be assigned or select a smaller VTHL.
ssgui4242
The duplicate VTHL is going to be assigned.
Explanation
The VTHL of the virtual disk to be assigned is duplicated.
Message type
Information
System processing
Does not process requests.
User action
Select the virtual disks to avoid VTHL duplication.
ssgui4309
Are you sure you want to delete the virtual enclosure?
Explanation
This message confirms whether you want to delete the virtual enclosure.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4312
The virtual enclosure which can be deleted dose not exist.
Explanation
The following explanations are possible:
Every virtual enclosure contains a virtual target, or
There are no virtual enclosures associated with the specified switch group in the switch group selection, or
The virtual enclosure to be deleted has been registered with a copy security group, or
A copy security group has been registered with the virtual enclosure to be deleted.
Message type
Information
System processing
Does not process requests.
User action
Depending on the cause, see Explanation above, users can take the following action:
Delete all the virtual targets that have been created in the virtual enclosure you want to delete, or
Open the [Select Switch Group] window and check whether the specified switch group is correct, or
Release the virtual enclosure to be deleted from the copy security group, or
Release any copy security groups from the virtual enclosure to be deleted.
ssgui4317
The virtual enclosure which is related to the same switch group does not exist.
Explanation
No virtual enclosure belongs to the same switch group as that of the virtualization switch associated with the selected virtual storage pool.
Message type
Information
System processing
Does not process requests.
User action
In the "View and Create" window, check for any virtual enclosure belonging to the same switch group as that of the virtualization switch associated with the selected virtual storage pool.
ssgui4320
The copy security group which can be deleted does not exist.
Explanation
Either of the following is a possible explanation:
There are no copy security groups where a virtual enclosure has not been registered, or
The copy security groups have been registered with virtual enclosures.
Message type
Information
System processing
Does not process requests.
User action
Depending on the cause, see Explanation above, users can take the following action:
Release all of the virtual enclosures that have been registered with the copy security groups to be deleted, or
Release the copy security groups from any virtual enclosures where they have been registered.
ssgui4321
Are you sure you want to delete the copy security group?
Explanation
This message confirms whether to execute deletion processing for copy security groups.
Message type
Confirmation
System processing
Does not process requests.
User action
Select the reply button.
ssgui4322
The virtual enclosure which can be registered does not exist.
Explanation
There are no virtual enclosures that can be registered with the selected copy security group.
The following are possible reasons why there are no virtual enclosures that can be registered:
All of the virtual enclosures have already been registered with the selected copy security group, or
There are no virtual enclosures.
Message type
Information
System processing
Does not process requests.
User action
Check whether there are any virtual enclosures in the [View and Create] window.
Alternatively, check whether all of the virtual enclosures have already been registered with the selected copy security group.
ssgui4323
Are you sure you want to release the virtual enclosure?
Explanation
This message confirms whether to execute the processing to release the selected virtual enclosure from the copy security group.
Message type
Confirmation
System processing
Does not process requests.
User action
Select the reply button.
ssgui4324
The copy security group which can be registered does not exist.
Explanation
There are no copy security groups that can be registered with the selected virtual enclosure.
The following are possible reasons why there are no copy security groups that can be registered:
All of the copy security groups have already been registered with the selected virtual enclosure, or
There are no copy security groups.
Message type
Information
System processing
Does not process requests.
User action
Check whether there are any copy security groups in the [View and Create] window.
Alternatively, check whether all of the copy security groups have already been registered with the selected virtual enclosure.
ssgui4325
The copy security group which can be released does not exist.
Explanation
No copy security groups have been registered with the selected virtual enclosure.
Message type
Information
System processing
Does not process requests.
User action
Check whether any copy security groups have been registered with the virtual enclosure.
ssgui4326
Are you sure you want to release the copy security group?
Explanation
This message confirms whether to execute the processing to release the selected copy security group from the virtual enclosure.
Message type
Confirmation
System processing
Does not process requests.
User action
Select the reply button.
ssgui4327
Are you sure you want to change the number of maximum copy sessions? .
Explanation
This message confirms whether to execute the processing to change the maximum number of copy sessions.
Message type
Confirmation
System processing
Does not process requests.
User action
Select the reply button.
ssgui4409
Are you sure you want to delete the virtual target?
Explanation
This message confirms whether you want to delete the virtual target.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4410
The virtual target which can constitute the redundant configuration with the specified virtual target does not exist.
Explanation
There is no virtual target that can constitute a redundant configuration with the specified virtual target. Otherwise, a virtual disk is already assigned to the copy destination virtual target.
Message type
Information
System processing
Does not process requests.
User action
Create a virtual disk that can constitute a redundant configuration with the specified virtual target, and then retry processing.
Check whether any virtual disk is already assigned to the copy destination virtual target. If you find any assigned virtual disk, release it from this target. Then, retry processing.
ssgui4413
Are you sure you want to make the virtual target redundant?
Explanation
This message confirms whether you want to make the virtual target redundant.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4414
The number of virtual targets of SCSI command cues exceeds the limitation value of CA. Is processing continued?
Explanation
This message confirms whether to execute processing (such as allocating a virtual disk, increasing the capacity of a virtual disk, redundancy processing for the virtual target, or migration startup processing) even though the number of SCSI command queues exceeds the limit for the CA.
Message type
Confirmation
System processing
Waits until the reply button is clicked.
User action
If the <OK> button is clicked, disk read or write performance may deteriorate. Consider possible performance degradations before clicking the reply button.
ssgui4416
The virtual target which can be deleted dose not exist.
Explanation
At least one virtual disk is allocated to every virtual enclosure.
Message type
Information
System processing
Does not process requests.
User action
Delete all virtual disks that have been allocated to the virtual target you want to delete.
ssgui4502
The physical disk which is suitable for conditions does not exist.
Explanation
There is no suitable physical disk for the input conditions.
Message type
Information
System processing
Does not process requests.
User action
Change the input conditions and retry processing.
ssgui4505
"Hold Migration Backup Disk" cannot be released because of indispensability.
Explanation
If the capacity of a virtual disk to be migrated cannot completely be divided by the MB, "Hold Migration Backup Disk" becomes indispensable and cannot be released.
Message type
Information
System processing
"Hold Migration Backup Disk" cannot be released.
User action
Start the migration with "Hold Migration Backup Disk" checked.
ssgui4508
Are you sure you want to start the migration?
Explanation
This message confirms whether you want to perform migration.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4509
The specified virtual disk has the backup disk.
Are you sure you want to delete it?
Explanation
There is a backup disk of previous migration processing on the virtual disk you want to use for performing migration. This message confirms whether you want to delete the backup disk.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4510
Are you sure you want to stop the migration?
Explanation
This message confirms whether you want to stop migration.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4511
Are you sure you want to change the migration?
Explanation
This message confirms whether you want to switch the physical disk that constitutes the virtual disk.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4512
Are you sure you want to restore the migration backup disk?
Explanation
This message confirms whether you want to return the physical disk that constitutes the virtual disk to the backup disk.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4513
Are you sure you want to delete the migration backup disk?
Explanation
This message confirms whether you want to delete the backup disk created in migration processing.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4515
The migration destination virtual storage pool does not exist.
Explanation
Migration processing cannot be started because there is no migration destination virtual storage pool.
Message type
Information
System processing
Does not display the "Select Migration Destination" dialog box.
User action
In the View and Create window, confirm the migration destination virtual storage pool.
ssgui4516
Failed to get the physical disk information.
Explanation
Failed to acquire the information for the copy (migration, replication, or ACM) source or destination physical disk.
Message type
Information
System processing
Does not process requests.
User action
Collect the necessary data for troubleshooting and contact your Fujitsu engineer (CE or SE).
ssgui4518
The migration source virtual disk does not exist.
Explanation
Either migration processing cannot be started because there is no migration source virtual disk, or there is no migration source virtual disk associated with the switch group specified for the switch group selection.
Message type
Information
System processing
Does not process requests.
User action
Check in the View and Create window whether there is a virtual disk that can be migrated, or open the [Select Switch Group] window, and check whether the specified switch group is correct.
ssgui4521
It is not in agreement with the real disk storage capacity of a migration place and a migration source.
Explanation
When it was specified to not retain a migration backup disk
The capacity of the migration destination physical disk must be the same as that of the migration source physical disk.
When it was specified to retain a migration backup disk
The capacity of the migration destination physical disk must be equal to or greater than that of the migration source physical disk.
Message type
Information
System processing
Does not process requests.
User action
When it was specified to not retain a migration backup disk
Match the capacity of the migration destination physical disk with that of the migration source physical disk and then execute migration.
When it was specified to retain a migration backup disk
Make the capacity of the migration destination physical disk equal or greater than that of the migration source physical disk and then execute migration.
ssgui4522
The information of migration backup disk does not exist.
Explanation
Either migration backup disk list information was not found, or there were no migration backup disks associated with the switch group specified for the switch group selection.
Message type
Information
System processing
Does not process requests.
User action
Check the information on the virtual disk in the View and Create window to see whether the virtual disk is a migration backup disk, or open the [Select Switch Group] window, and check whether the specified switch group is correct.
ssgui4523
You cannot set the capacity with the selected condition.
Explanation
The capacity input in the conditions for selecting migration destination physical disks exceeds the total capacity of physical disks to be selected using the selected condition.
Message type
Information
System processing
Does not process requests.
User action
Select another condition when selecting physical disks.
Alternatively, change the capacity.
ssgui4524
The physical disk which is in agreement with the selected condition does not exist.
Explanation
No physical disks matched the selected condition when migration destination physical disks were being selected.
Message type
Information
System processing
Does not process requests.
User action
Select another condition when selecting the physical disks.
ssgui4525
After the migration is executed, a virtual disk in the migration destination is encrypted.
Are you sure you want to start the migration?
Explanation
Confirm if you want to execute the migration processing even though the virtual disk in the migration destination will be encrypted.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4526
After the migration is executed, a virtual disk in the migration destination is not encrypted.
Are you sure you want to start the migration?
Explanation
Confirm if you want to execute the migration processing even though the virtual disk in the migration destination will not be encrypted.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4527
The composition condition of recommending it does not suffice for the capacity of a migration source virtual disk.
Explanation
The total capacity of the physical disks that meet the recommended configuration conditions in the migration destination is not sufficient for the capacity of the virtual disk in the migration source. Therefore, the physical disks in the migration destination cannot be selected under the recommended configuration conditions.
Message type
Information
System processing
Moves to the selection screen of the migration destination (physical disks).
User action
Change the configuration condition and select the physical disks.
Alternatively, change the capacity.
ssgui4529
The migration backup disk that cannot be restored has been selected.
Explanation
Some of the migration backup disks selected for restoration could not be restored because of an error.
This means that it is not possible to restore from these backup disks.
Message type
Information
System processing
Does not process requests.
User action
Select the migration backup disks to be restored again, and then perform the restoration again.
ssgui4530
Are you sure you want to stop the replication?
Explanation
This message confirms whether you want to stop replication processing.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4540
Are you sure you want to stop the ACM?
Explanation
This message confirms whether you want to stop the backup processing started from the ACM.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4550
The retrieval item was not found.
Explanation
In forward matching, no more names in the copy history list match the input retrieval name.
Message type
Information
System processing
Waits until the reply button is clicked.
User action
Click the reply button.
ssgui4551
There is no information of copy history.
Explanation
Either no copy history information was found, or there is no copy history information associated with the switch group specified for the switch group selection.
Message type
Information
System processing
Waits until the reply button is clicked.
User action
Click the reply button, then open the [Select Switch Group] window and check whether the specified switch group is correct.
ssgui4560
The VS900 management area does not exist.
Explanation
No VS900 management area was found.
Either no physical disks have been registered in the virtual storage pool, or there is no VS900 management area associated with the switch group specified for the switch group selection.
Message type
Information
System processing
Waits until the reply button is clicked.
User action
Register a physical disk in the virtual storage pool, or open the [Select Switch Group] window, and check whether the specified switch group is correct.
ssgui4561
All the VS900 management areas have been created.
Explanation
Either no more VS900 management areas can be created because VS900 management areas have been created for all CA ports, or there are no CA ports associated with the switch group specified for the switch group selection.
Message type
Information
System processing
Waits until the reply button is clicked.
User action
Click the reply button.
ssgui4562
The VS900 management area which can be deleted does not exist.
Explanation
No VS900 management area can be deleted because no management area has been created, or management areas are in use in copy processing.
Alternatively, there is no VS900 management area associated with the switch group specified for the switch group selection.
Message type
Information
System processing
Waits until the reply button is clicked.
User action
Click the reply button, then open the [Select Switch Group] window and check whether the specified switch group is correct.
ssgui4563
Are you sure you want to delete the VS900 management area?
Explanation
This message requests confirmation to delete the VS900 management area.
Message type
Information
System processing
Waits until the reply button is clicked.
User action
Click the reply button.
ssgui4566
The physical disk where the VS900 management area can be created does not exist.
Explanation
There is no physical disk on which a VS900 management area can be created.
It is likely that no physical disk is registered in the virtual storage pool, or there are no CA ports associated with the switch group specified for the switch group selection.
Message type
Information
System processing
Waits until the reply button is clicked.
User action
Register a physical disk in the virtual storage pool, or open the [Select Switch Group] window, and check whether the specified switch group is correct.
ssgui4567
Failed to create the VS900 management area.
Explanation
A VS900 management area could not be created.
A list of CA ports in which no VS900 management area could be created is displayed, with detailed error information.
Message type
Error
System processing
Waits until the reply button is clicked.
User action
Select a CA port from the list of CA ports in which no VS900 management area could be created and check the detailed error information.
ssgui4568
Failed to delete the VS900 management area.
Explanation
A VS900 management area could not be deleted.
A list of CA ports from which a VS900 management area could not be deleted is displayed, with detailed error information.
Message type
Error
System processing
Waits until the reply button is clicked.
User action
Select a CA port from the CA ports from which a VS900 management area could not be deleted and check the detailed error information.
ssgui4599
The information on the copy status is being acquired.
Explanation
Information cannot be updated or manipulated while copy status is being acquired at every monitoring period set in the operating environment window.
Message type
Information
System processing
Information cannot be updated or manipulated until the acquisition of copy status is completed.
User action
Wait a while and then execute the processing before display of this message.
ssgui4902
Are you sure you want to stop the VSC Engine?
Explanation
This message confirms whether you want to stop the engine program running on the virtualization switch.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4903
Are you sure you want to recreate the composition data?
Explanation
This message requests confirmation to integrate the virtualization switch configuration information stored on the admin server with the virtualization switch configuration information stored in VSC Engine.
Message type
Confirmation
System processing
Waits until the reply button is clicked.
User action
Click the reply button.
ssgui4905
Are you sure you want to change the tracelevel?
Explanation
This message confirms whether you want to change the level of trace collected by the engine program running on the virtualization switch.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4912
Are you sure you want to change the BOXID?
Explanation
This message confirms whether you want to change the BOXID.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4914
A virtual enclosure does not exist in the virtualization switch.
Explanation
The virtualization switch is not associated with the virtual enclosure specified, or there is no VS900 management area associated with the switch group specified for the switch group selection.
Message type
Information
System processing
Does not process requests.
User action
BOXID can be edited only when the virtual enclosure is associated with a virtualization switch. Check the specified virtual enclosure, then open the [Select Switch Group] window and check whether the specified switch group is correct.
ssgui4915
Are you sure you want to invalidate the virtual switch?
Explanation
This message confirms whether to disable the virtualization switch.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4916
Are you sure you want to validate the virtual switch?
Explanation
This message confirms whether to enable a virtualization switch.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4919
Are you sure you want to execute the installation of the firmware?
Attention: It takes very long time to install the firmware.
The following firmwares are installed = {0}
Explanation
Message asking for confirmation of firmware installation.
Note that installing the firmware takes long time.
Parameters
0: Firmware that is being installed
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4920
The stop of the VSC Engine failed.
Explanation
Failed to stop the VSC Engine.
Message type
Information
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4921
The backup of the VSC Engine environment failed.
Explanation
Backup of the VSC Engine configuration failed.
Message type
Information
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4922
The deletion of an unnecessary file of the VSC Engine failed.
Explanation
Failed to delete unnecessary VSC Engine files.
Message type
Information
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4923
The installation of the firmware failed.
Firmware that failed in installation = {0}
Firmware that succeeded in installation = {1}
Explanation
Firmware installation failed.
Parameters
0: Firmware for which installation failed
1: Firmware for which installation succeeded
Message type
Information
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4924
The backup of the FOS configuration failed though the installation of the FOS firmware succeeded.
Explanation
FOS firmware installation succeeded, but backup of the FOS configuration failed.
Message type
Information
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4925
Restoring of the VSC Engine environment failed though the installation of the firmware succeeded.
Explanation
The firmware installation succeeded, but restoration of the VSC Engine configuration failed.
Message type
Information
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4926
Rebooting the virtualization switch failed though the restoring of the VSC Engine environment and the installation of the firmware succeeded.
Explanation
The firmware installation and restoration of the VSC Engine environment settings both succeeded, but reactivation of the virtualization switch failed.
Message type
Information
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4928
Are you sure you want to backup the VSC Engine environment?
Explanation
Message asking for confirmation of the VSC Engine configuration backup.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4931
Are you sure you want to restore the VSC Engine environment?
Explanation
Message asking for confirmation of the VSC Engine configuration restore.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4933
Are you sure you want to reboot the virtualization switch?
Explanation
Message asking for confirmation of the virtualization switch reactivation.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4934
IP address is illegal. Please input correct IP addresss.
Explanation
An illegal IP address was entered.
Message type
Error
System processing
The request to the virtual storage window is not accepted.
User action
Enter the correct IP address.
ssgui4935
IP address is illegal. Please input correct IP addresss. Item name = {0}
Explanation
An illegal IP address was entered.
Parameters
0: Item name for which illegal IP address was entered
Message type
Error
System processing
The request to the virtual storage window is not accepted.
User action
Enter the correct IP address.
ssgui4941
Are you sure you want to collect switch logs and virtualization function logs?
Explanation
Message asking for confirmation of virtualization switch log information collection.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4944
Are you sure you want to backup the FOS configuration?
Explanation
Message asking for confirmation of the virtualization switch FOS configuration backup.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4947
Are you sure you want to restore the FOS configuration?
Explanation
Message asking for confirmation of the virtualization switch FOS configuration restore.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4950
Are you sure you want to set the login information on virtualization management port?
Explanation
Message asking for confirmation of the port login information for virtualization management setting.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4953
Are you sure you want to set the virtualization function?
Explanation
Message asking for confirmation of the virtualization function information setting.
Message type
Confirmation
System processing
Waits until the reply button is selected.
User action
Select the reply button.
ssgui4960
The login name and the password of the virtualization management port are not set.
Please set the login name and the password by input of login information dialog.
Explanation
The port login name and password for virtualization management are not entered.
Message type
Error
System processing
The request to the virtual storage window is not accepted.
User action
Check whether the port login name and password for virtualization management have been entered in the login information input dialog box.