Name of display item | Value | Description | |
|---|---|---|---|
Basic Information | WWPN | Eight-byte WWPN | Indicates the WWPN (World Wide Port Name) set for a CA. |
WWNN | Eight-byte WWNN | Indicates the WWNN (World Wide Node Name) set for a CA. | |
Device Status | "normal", | Indicates the device status. When the monitoring status is "unmonitored" or "undefined", it is indicated as "unknown". | |
Monitoring Status | "normal", | Indicates the level of recognition of a device by this software. "normal" indicates that the device is recognized normally. "unmonitored" indicates that the device was previously recognized but currently cannot be recognized. "undefined" indicates that operation of the device in a LAN has been verified, though the device is not registered with this software. In the event of "invalid Password", change the device password stored by this software. Select [Device] - [Change Account Information for Device Management] from the menu. | |
Supported FC Classes | "Class1", | Indicates the classes of Fibre Channel supported by a CA. | |
Supported FC Port Type | "N", | Indicates the type of Fibre Channel port supported by a CA. (The indicated type is incorrect unless the Fibre Channel switch is managed by connecting it to LOOP.) | |
Current FC Port Type | "N", | Indicates the type of Fibre Channel port for which a CA is active. | |
Driver Version | Driver version | Indicates the driver version. | |
FC Port Information | Group Number | Value | Indicates the group name of the storage side where a channel adapter (CA) is mounted. (ROUTER number for the ETERNUS6000, GR740, GR840 and CM number for the ETERNUS8000, ETERNUS4000, ETERNUS3000, ETERNUS2000, GR710, GR720, GR730 ) |
CA Exchange Unit Number | Hexadecimal number | Indicates the unit of channel adapter (CA) replacement. Channel adapters having the same value are affected by a host system replacement. | |
Port Number | Hexadecimal number | Indicates the port number of a channel adapter (CA). | |
Affinity Type | "No_Affinity", | Indicates the type of host affinity (zone function). No_Affinity indicates that an access path is not set. Another_Binding indicates that storage affinity (LUN mapping) is not set or that zoning is set with a Fibre Channel switch or storage. GR_PortZone_Binding indicates that affinity is set for ETERNUS8000, ETERNUS6000, ETERNUS4000, ETERNUS3000 model 50, GR710, GR720, GR730. For ETERNUS3000 model 50, GR710, GR720, GR730, a zone is set for each CA port. GR_Subsystem_Zone_Binding indicates that affinity is set for the ETERNUS8000, ETERNUS6000, ETERNUS4000, ETERNUS3000 (except model 50), ETERNUS2000 and GR740. For the ETERNUS8000, ETERNUS6000, ETERNUS4000, ETERNUS3000 (except model 50), ETERNUS2000 and GR740, a zone is set for the subsystem. |
Specified AffinityGroup Information | Specified AffinityGroup | Any character string | Indicates the AffinityGroup name of configured storage. |
LUN in AffinityGroup | Any character string | Indicates the LUN of a storage device with the AffinityGroup name. | |
Access Path Information | AffinityGroup Name | Any character string | Indicates the AffinityGroup name set for a CA. |
Connection Permission WWPN | Eight-byte WWPN | Indicates the WWPN of the HBA side associated with the above AffinityGroup name. (Host affinity setup) | |
Operation Mode | Any character string | Indicates the operation mode set for a CA. (The current value is not entered.) | |
Current FC Class | "Class1", | Indicates the Fibre Channel class set for a CA. |
