Top
ETERNUS SF Storage Cruiser 14.0 User's Guide

B.7.12 Storage properties

Name of display item

Value

Description

Basic Information

Device Name

Any character string

Identifier used by this software. Each device name is unique in its management.

For a storage device, a device name + serial number, WWN, etc., is displayed.

SNMP SysName is indicated if it is specified for the device.

A management name is indicated if it has been defined from this software.

Device Status

"normal",
"warning",
"error",
"unknown"

Indicates the device status.

When the monitoring status is "unmonitored" or "undefined", it is indicated as "unknown".

Monitoring Status

"normal",
"unmonitored",
"undefined",
"invalid Password"

Indicates the level of recognition of a device by this software.

"normal" indicates that the device is recognized normally.

"unmonitored" indicates that the device is registered with this software but cannot be recognized for operation with a LAN.

"undefined" indicates that operation of the device in a LAN has been verified, though the device is not registered with this software.

In the event of "invalid Password", change the device password stored by this software. Select [Device] - [Change Account Information for Device Management] from the menu.

Manugacturer Name

Any character string

Indicates a manufacturer's name.

Product Name

Any character string

Indicates a product name.

IP Address

IP address

Indicates the IP address of a device.

Management Software

Any character string

Indicates the start command or URL of Management Software. (For devices other than ETERNUS3000, ETERNUS4000 models 80 and 100, GR series devices, it can be changed manually with the <Change> button. For details, see "B.7 Resource View Properties".)

Firmware Version

Any character string

Indicates the firmware version.

Event Notification function setup

"Setting up",
"Un-setting up",
"Manual setup",
"Un-supported"

Indicates the status of SNMP Trap transmission place setting.

Nothing is displayed for an unregistered device.

Storage Information

Storage Type

"Disk",
"Tape",
"Array",
"Robot"

Indicates information on the type of storage device.

Serial Number

Serial number

Indicates the serial number of a device.

BOX ID

BOX ID

BOX ID is displayed for ETERNUS8000 series, ETERNUS6000 series, ETERNUS4000 series, ETERNUS3000 series, ETERNUS2000 series and GR series.

TPP Remaining Capacity Status

“Normal”,

“Caution”,

“Warning”,

“Blank”

TPP remaining capacity status is displayed at using Thin Provisioning Function. “Blank” is displayed, If Thin Provisioning Function is not used.









Name of display item

Value

Description

Specified AffinityGroup Information

Specified AffinityGroup

Any character string

Indicates the AffinityGroup name of configured storage. (ETERNUS8000 series, ETERNUS6000 series, ETERNUS4000 series, ETERNUS3000 series, ETERNUS2000 series and GR series only)

LUN in AffinityGroup

Any character string

Indicates LUN in the storage AffinityGroup using a decimal numbers format. (ETERNUS8000 series, ETERNUS6000 series, ETERNUS4000 series, ETERNUS3000 series, ETERNUS2000 series and GR series only)


The "Eco-mode information and set" is displayed for ETERNUS disk storage systems that support to display and control of the Eco-mode. For the storage devices that support the Eco-mode operation, refer to "1.3.4 Energy-saving operation for storage device".

Name of display item

Value

Description

Eco-mode information and set

Eco-mode information on device

Current Eco-mode setting

"ON",
"OFF"

Indicates the current Eco-mode setting status of the storage device.
"ON" indicates that the Eco-mode is enabled.
"OFF" indicates that the Eco-mode is disabled. In this case, "Eco-mode information on RAID group" is not displayed.

Eco-mode information on RAID group

RAID group

Any character string

Indicates the RAID group number and name. When the name is not set on the RAID group, the RAID group number is only displayed.

Eco-mode

"ON",
"OFF",
"-"

Indicates the Eco-mode status that is set on the RAID group.
"ON" indicates that the Eco-mode is enabled.
"OFF" indicates that the Eco-mode is disabled.
"-" indicates that the Eco-mode cannot be set.

Status

"Active".
"Idle",
"In the boot process",
"In the stop process",
"-"

Indicates the current status of disks that compose the RAID group.
"Active" indicates that disks are active.
"Idle" indicates that disks are inactive.
"In the boot process" indicates that disks start in progress.
"In the stop process" indicates that disks stop in progress.
"-" indicates that disks are cannot be set Eco-mode (SSD).

Control

"start request",
"stop request"

Indicates the disk control status.

"start request" indicates that disk starting is requested.
"stop request" indicates that disk stopping is requested.

Schedule
(No-Name)

Any character string (Decimal number)

The Eco-mode schedule set on RAID group is displayed with the "number"-"name" format.
(Example) 01-DB01

When the Eco-mode of RAID group can be controlled by this software, the "External" is displayed on the name.

Device that permits access

Any character string

Eight-byte WWPN

Indicates the device can access to RAID group, or the port information.
"Information is not acquired" indicates that the information for displaying is not acquired. If you would like to display, turn on the "The row of the access permission device is displayed" check box, and click the <Refresh> button.

When the server node, Fibre Channel switch, and storage device are connected and there are accessed without using security function, no information is displayed.

When the storage devices are connected directly, no information is displayed.