The Site view displays the all devices configuration information of the devices managed.
Expanding the tree displays the server, storage, and SAN categories. Expanding the categories displays the server domain, storage domain, and SAN device type.
The following explains the icons in the Tree view and Map view and the List view items.
Icon state
Resource states are indicated with colors and icons. When you select an icon with a mouse click, the icon is displayed in blue, indicating that the icon is being selected.
Icon state | Color | Icon | Description | Action to be taken |
---|---|---|---|---|
normal | Green | The device is operating normally. | None | |
warning | Yellow | An error occurred, but the resource remains usable. | Replace the faulty part, and execute recovery processing. -> "8.1 Windows Displayed in the Event of a Fault and Troubleshooting" | |
error | Red | An error occurred for an unspecified cause, and the resource cannot be used. | Replace the faulty part, and execute recovery processing. -> "8.1 Windows Displayed in the Event of a Fault and Troubleshooting" | |
stop | Green | Operation of a resource was stopped, and the resource cannot be used. | None | |
fatal | Red | A malfunction occurred in the operation of this resource, and the resource cannot be used. | None | |
unknown | Grey | The status cannot be determined. | None | |
timeout | Gray | The device is registered in this software, but is not recognized by the software. The device properties displayed by the GUI are the values that were retrieved the last time that the device was recognized. However, if the device is a Fibre Channel switch that enters the timeout state, the GUI does not display the Fibre Channel physical line under the Fibre Channel switch. The GUI indicates errors for all access paths using the Fibre Channel switch because this software cannot check the statuses of these paths. | The power supply of the device may be off, Agent may not be operating, or a LAN error may have occurred. When you changed the IP address manually, see also "9.1.2 Changing the operating environment" and perform operations to reflect the changes of the IP address. If the device uses the SNMP protocol for communication, the community name of the device may differ between the target device and admin server. If the community name of the target device has been changed, set the community name by referring to "C.2 sanma.conf Parameter", and reflect the setting file on this software. -> Check the device status, and select [Refresh] from the menu. | |
undefined | Violet | The device is undefined in this software. | Define the device. |
List view items
All devices and their states are displayed in list format.
To display the list view items, select [View] - [Change] - [List View] from the menu.