| ETERNUS SF Storage Cruiser Install Guide 13.2 - Solaris (TM) Operating System / Linux / Microsoft(R) Windows(R) - |
|
Contents
|
This chapter describes restrictions, advisory notes, and incompatibility information regarding ETERNUS SF Storage Cruiser.
|
|
Environment |
Restrictions |
Corrective action |
Planned resolution |
|
1 |
Windows Vista environment client |
Restrictions for print function |
Print on a printer set by "Printing Preferences". |
Next version or later |
|
2 |
Windows Vista environment client |
After doing the following operations on a correlation window, a popup menu is not displayed by right click. |
Select other point than the dragged list. |
Next version or later |
|
3 |
Environment where Internet Explorer7.0 (later IE7) is set to the standard browser |
Restrictions for display of online manual using IE7 |
Retrieve the point in question from the displayed manual. |
Next version or later |
|
4 |
General clients |
For tree view, map view and list view, you cannot move from screen to screen with the keyboard (Tab key operation), select/move device icons (cursor key operation) and scroll screens with the mousewheel function. |
Use the mouse to move screens, select device icons and scroll screens. |
Next version or later |
|
5 |
Solaris OS Manager |
fjsnap alone cannot collect required data when collecting detailed investigation data. |
Both fjsnap and managersnap should be used. |
When Enhanced Support Facility including FJSVsnap(VL:2.7) is offered. |
This software, including manager, agent and client, cannot be used at the same time as other exclusive software described in "Exclusive Software" section from chapter4 to chapter 6. Please follow the instructions and uninstall that software.
For details of the shift from Softek Storage Cruiser V1.2.2 to ETERNUS SF Storage Cruiser, please contact Fujitsu technical staff.
When using zone on Solaris 10 OS, install this software to the global zone. This software can not be installed to the non-global zone.
Zone is handled in this software as follows;
Resource correlation management
Only the global zone is displayed. For the method of displaying the relationship of the global zone and the non-global zone, or performing operation for the non-global zone, refer to the Solaris 10 manual.
For hardware (excluding PRIMEQUEST) used under Windows and Linux, disable NX bit or XD bit using BIOS settings. The BIOS settings for NX bit or XD bit vary with the type of hardware. For particulars of BIOS settings, make inquiries to the relevant hardware vendor.
In addition, BX620 S2 stands for "NX Support" and BX620 S3 and BX620 S4 stand for "Execute Disable Bit".
If any virtual machine functions are being used, install this software into the host operating system. If installed into a guest operating system, it does not work properly.
This software treats the guest OS as follows.
Resource related management
Only host operating information is displayed. For how to display the relationship between host operating system and guest operating system and how to operate the guest operating system, refer to the instruction manual for virtualization software.
The installation target of the shell script used by the shell link functionality has been changed in ETERNUS SF Storage Cruiser 13.1.
Solaris OS Manager
[Before change] /etc/opt/FJSVssmgr/current/trapop.sh
[After change] /opt/FJSVssmgr/lib/sample/trapop.sh
Windows Manager
[Before change] Administrative_server_environment_setting_directory\Manager\etc\opt\FJSVssmgr\current\trapop.bat
[After change] Administrative_server_program_directory\Manager\opt\FJSVssmgr\lib\sample\trapop.bat
For details, refer to "6.4 Event Display and Linkage" in the ETERNUS SF Storage Cruiser User's Guide.
The following messages have been changed in relation to the SN200 MDS (Cisco MDS) events in ETERNUS SF Storage Cruiser 13.1.
[Before change] The status of the port has changed to %STATE%/%STATUS%
[After change] The status of the port has changed to %STATE%/%STATUS% fc%SLOT NUMBER%/%PORT NUMBER IN THE SLOT%(%PORT NUMBER%)
For the details of messages after the change, refer to "2.2.4 Explanation of SN200 MDS (Cisco MDS) Events" in the ETERNUS SF Storage Cruiser Event Guide.
Argument-1 value to be handed over to the event linked functionality in ETERNUS SF Storage Cruiser 13.2 has been changed.
[Before change]Product name in an error message to be handed over to argument-1 will be handed over as "SilkWorm xxxx".
i.e.) "AP:SSC: INFO: swsag4203:FC Port No.0 Online in M540(SilkWorm 48000[192.168.0.1])"
[After change]SN200 product name in an error message to be handed over to argument-1 will be handed over as "xxxx."
i.e.) "AP:SSC: INFO: swsag4203:FC Port No.0 Online in M540(48000[192.168.0.1])"
In ETERNUS SF Storage Cruiser 13.2, the install directory and the command name of the restart and stop commands of the operation control Server daemon have been changed.
Solaris OS Manager
[Before change] /opt/FJSVrcxmr/sbin/rcxmgrctl
[After change] /opt/FJSVssmgr/sbin/managerctl
Refer to " C.1.2.2 Starting and stopping the daemons of the administrative server at specific times " and " C.2.2.2 Starting and stopping the daemons of the administrative server at specific times" in "ETERNUS SF Storage Cruiser User Guide" for details.
In ETERNUS SF Storage Cruiser 13.2, the install directory of the command for investigation data collection of the operation control server and command names have been changed.
Solaris OS Manager
[Before change] /opt/FJSVrcxmr/sbin/rcxmgrsnap
[After change] /opt/FJSVssmgr/sbin/managersnap
Refer to "Appendix E Troubleshooting" in "ETERNUS SF Storage Cruiser User's Guide" for details.
In ETERNUS SF Storage Cruiser 13.2, the Cmdline resource path for cluster environment has been changed.
Solaris OS Manager
[Before change]
Start script
/opt/FJSVrcxmr/cluster/cmd/rcxclstartcmd
Stop script
/opt/FJSVrcxmr/cluster/cmd/rcxclstopcmd
Check script
/opt/FJSVrcxmr/cluster/cmd/rcxclcheckcmd
[After change]
Start script
/opt/FJSVssmgr/cluster/cmd/rcxclstartcmd
Stop script
/opt/FJSVssmgr/cluster/cmd/rcxclstopcmd
Check script
/opt/FJSVssmgr/cluster/cmd/rcxclcheckcmd
Refer to "A.4.3 Manager operation setup (details)".
|
Contents
|