| ETERNUS SF AdvancedCopy Manager Message Guide 13.0 -Microsoft(R) Windows(R) 2000/Microsoft(R) Windows Sever(TM) 2003-, -Solaris-, -HP-UX-, -Linux-, -AIX- |
|
Contents
Index
|
This chapter explains the messages related to the ETERNUS provider.
Registration of an hardware provider went wrong.
Hardware provider registration failed.
The system halts processing.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
An hardware provider is registered.
The hardware provider has already been registered.
The system halts processing.
None
Deletion of an hardware provider went wrong.
Hardware provider deletion failed.
The system halts processing.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
An hardware provider is deletion ending.
The hardware provider has already been registered.
The system halts processing.
None
Internal inconsistency occurred. Server=[SERVER]
An internal inconsistency occurred.
SERVER: Server name
The system halts processing.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
Cannot acquire server information.
Server information could not be obtained.
When the cluster operation is performed, check whether the running machine is a node in operation.
Information acquisition went wrong from the repository. Error code=[ERRNO]
Information could not be obtained from the repository.
ERRNO: Error code
The system halts processing.
See Error Code for Configuration Management in this manual. Take action according to the error code and then reenter the command.
The server is not registered. Server=[SERVER]
The server is not registered.
SERVER: Server name
The system halts processing.
Check the server registration status.
The device is not registered. Device=[DEVICE]
The device is not registered.
DEVICE: Device name
The system halts processing.
Check the device registration status.
A device is registered as copy set information. Device=[DEVICE], server=[SERVER]
The device is already registered as copyset information.
DEVICE: Device name
SERVER: Server name
The system halts processing.
Use the reference option of the copyset registration, deletion, or reference command to check the device registration status.
Cannot acquire device information. Server=[SERVER], error=[ERROR]
Device information could not be obtained.
SERVER: Server name
ERROR: Detailed error message for ETERNUS storage system
The system halts processing.
See Detailed Error Messages of GR Series. Take action according to the error code and then reenter the command.
The error occurred in processing between servers. Error code=[ERROR], detailed code=[DETAIL]
An error occurred during processing between servers.
ERROR: Error code
DETAIL: Detailed code
The system halts processing.
See Error Codes for Communication Service/Communication Daemon in this manual. Take action according to the Detailed code and then reenter the command. "Request send destination server" is the copy target server.
Access of copy set information went wrong. Server=[SERVER]
Access to the copyset information failed.
SERVER: Server name
The system halts processing.
On the target server, collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
Fault is in the size of a device. Copied material device=[SIZE], copy place device=[SIZE]
The device size is invalid.
SIZE: Device size (blocks)
The system halts processing.
Check the device size.
The device is not registered as copy set information. Device=[DEVICE]
The device is not registered as copyset information.
DEVICE: Device name
The system halts processing.
Check the device registration status.
The server of cluster employment cannot be made into a copy place server.
A server used for the cluster operation cannot be specified as a copy target server.
The system halts processing.
Confirm the copy target server.
The same server was specified at the copy place the copied material. Or the same LUN was specified at the copy place the copied material.
The same server was specified as the copy source and target server, or the same LUN was specified as the copy source and target LUN.
The system halts processing.
Check the server and LUN.
The group name format is different.
The group name format is different.
The system halts processing.
Check the group name.
The copy type differs from the copy set information that has been registered.
The copy type does not match the copy set information that has already been registered.
The system halts processing.
Check the copy type.
The group name has already been registered.
The group name has already been registered.
The system halts processing.
Check the group name.
Specify the target device.
Specify the target device.
The system halts processing.
Execute the command with copy destination information specified.
The session exists.
The session exists.
The system halts processing.
Delete the session, and execute copy set deletion processing.
Internal inconsistency occurred.
An internal inconsistency occurred.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
Acquisition of device information went wrong. Error=[ERROR]
Device information could not be obtained.
ERROR: Detailed error message of the ETERNUS storage system
The system halts processing.
See "Detailed Error Messages of GR Series" in this manual. Take action according to the error code and then reenter the command.
Access of copy set information went wrong.
Access to copyset information failed.
The system halts processing.
On the target server, collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
Acquisition of server information went wrong.
Server information could not be obtained.
The system halts processing.
On the target server, collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
Copy set information is not registered.
Copyset information is not registered.
The system halts processing.
Check the registration status of the target device.
An attempt to obtain physical disk information failed.
An attempt to obtain physical disk information failed.
The system halts processing.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
The server has not been registered. Server = [SERVER].
The server has not been registered.
SERVER:server name
The system halts processing.
Check the registration status of the server.
There is not enough memory.
There is not enough memory.
The system halts processing.
Close other applications, and then re-execute.
Internal inconsistency occurred.
An internal inconsistency occurred.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
Insufficient memory occurred.
A memory shortage occurred.
The system halts processing.
Terminate other applications and then reenter the command.
Acquisition of device information went wrong. Error=[ERROR]
Device information could not be obtained.
ERROR: Detailed error message of the ETERNUS storage system
The system halts processing.
See "Detailed Error Messages of GR Series" in this manual. Take action according to the error code and then reenter the command.
Access of a device went wrong. Error code=[ERRNO]
Device access failed.
ERRNO: Error code
The system halts processing.
On the target server, collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
It is copy set a non-registered device. Signature=[SIGNATURE], disk=[DISK]
Device access failed.
SIGNATURE: Disk signature
DISK: Physical disk number
The system halts processing.
Check the device registration status.
Access of copy set information went wrong.
Access to copyset information failed.
The system halts processing.
On the target server, collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
OPC cannot be performed. Error=[ERROR]
OPC cannot be executed.
ERROR: Detailed error message of ETERNUS storage system
The system halts processing.
See "Detailed Error Messages of GR Series" in this manual. Take action according to the error code and then reenter the command.
If 24 (hardware error requiring CE-CALL) is output as an error code, Advanced Copy was probably not set correctly. Check the GR series setting.
It is execution from other than ACM requestor.
Execution must be performed from the ACM requester.
The system halts processing.
Check whether the ACM requester is executed.
The session status is invalid.
The session status is invalid.
The system halts processing.
Check the copy status.
The suspend of EC cannot be performed. Error=[ERROR]
The suspend of EC cannot be performed.
ERROR: Detailed error message for the ETERNUS storage system
The system halts processing.
Refer to "Detail Error Messages of GR Series" in this manual, take action according to the content of the error code, and then re-execute.
If 24 (hardware error requiring CE-CALL.) is output for the error code, the settings for AdvancedCopy may not have been made correctly. Check the settings for the GR series.
An attempt to obtain session information failed. Error=[ERROR]
An attempt to obtain session information failed.
ERROR: Detailed error message for the ETERNUS storage system
The system halts processing.
Refer to "Detail Error Messages of GR Series" in this manual, take action according to the content of the error code, and then re-execute.
If 24 (hardware error requiring CE-CALL.) is output for the error code, the settings for AdvancedCopy may not have been made correctly. Check the settings for the GR series.
QuickOPC cannot be executed. Error=[ERROR]
QuickOPC cannot be executed.
ERROR: Detailed error message for the ETERNUS storage system
The system halts processing.
Refer to "Detail Error Messages of GR Series" in this manual, take action according to the content of the error code, and then re-execute.
If 24 (hardware error requiring CE-CALL.) is output for the error code, the settings for AdvancedCopy may not have been made correctly. Check the settings for the GR series.
An internal conflict has occurred.
An internal conflict has occurred.
The system halts processing.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
There is not enough memory.
There is not enough memory.
The system halts processing.
Close other applications, and then re-execute.
The device has not been registered for EC use in the copy set information.
The device has not been registered for EC use in the copy set information.
The system halts processing.
Check the content registered for the copy set.
An attempt to obtain device information failed.
An attempt to obtain device information failed.
The system halts processing.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
An attempt to obtain server information failed.
An attempt to obtain server information failed.
The system halts processing.
For cluster operations, check whether the execution machine is the active node.
Access to copy set information failed. Server = [SERVER]
Access to copy set information failed.
SERVER:server name
The system halts processing.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
The device is not registered as copy set information. Device=[DEVICE], Server = [SERVER]
The device is not registered as copy set information.
DEVICE:device name
SERVER:server name
The system halts processing.
Check the registration status of the device.
The server has not been registered. Server = [SERVER].
The server has not been registered.
SERVER:server name
The system halts processing.
Check the registration status of the server.
An attempt to obtain physical disk information failed.
An attempt to obtain physical disk information failed.
The system halts processing.
Collect the information required for troubleshooting while referring to the following manual, and contact your Fujitsu systems engineer.
"Collecting maintenance information" in "ETERNUS SF AdvancedCopy Manager Operator's Guide"
Operation failed. Error=[ERROR]
An OPC, EC or QuickOPC operation failed.
ERROR: Detailed error message for the ETERNUS storage system
The system halts processing.
Refer to "Detail Error Messages of GR Series" in this manual, take action according to the content of the error code, and then re-execute.
If 24 (hardware error requiring CE-CALL.) is output for the error code, the settings for AdvancedCopy may not have been made correctly. Check the settings for the GR series.
Copy has not started.
OPC, EC or QuickOPC has not started.
The system halts processing.
Check the copy status.
The operation cannot be performed with the current copy status.
The operation cannot be performed with the current copy status.
The system halts processing.
Check the copy status.
If necessary, forcibly stop or pause the operation.
For OPC and QuickOPC, only stop operations are possible.
For OPC and QuickOPC, only stop operations are possible.
The system halts processing.
Check the parameters.
|
Contents
Index
|