| ETERNUS SF AdvancedCopy Manager Message Guide 13.0 -Microsoft(R) Windows(R) 2000/Microsoft(R) Windows Sever(TM) 2003-, -Solaris-, -HP-UX-, -Linux-, -AIX- |
|
Contents
Index
|
This chapter describes the messages related to the tape backup procedure.
Illegal Arguments. (DETAIL)
The format in which the command was specified is incorrect.
DETAIL: Detailed error cause
Specify the command in the correct format and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
It failed in communication with AdvancedCopy Manager Tape server. [Server name=TAPESERVER NAME, Error=ERRNO, Reason=REASON.]
An attempt to communicate with the tape server has failed.
TAPESERVER NAME: Tape server name
ERRNO: Error code
REASON: Detailed error code
Take action based on the error code indicated by REASON according to "Error Codes of Communication Service/Communication Daemon" in this manual.
It failed in communication with AdvancedCopy Manager agent. [Server name=TAPESERVER NAME, Error=ERRNO, Reason=REASON.]
An attempt to communicate with the Storage server has failed.
TAPESERVER NAME: Tape server name
ERRNO: Error code
REASON: Detailed error code
Take action based on the error code indicated by REASON according to "Error Codes of Communication Service/Communication Daemon" in this manual.
It failed in the access of the registry of AdvancedCopy Manager. [errno=ERRNO]
An attempt to acquire configuration management information has failed.
ERRNO: Error code
Take action based on the error code indicated by ERRNO according to "Error Codes of Configuration Management" in this manual.
It failed in the get nodename from AdvancedCopy Manager. [file=FILE, code=ERRNO]
An attempt to acquire the execution server registry has failed.
FILE: Registry file name
ERRNO: Error code
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
It failed in the lock device. DETAIL
An attempt to lock the device has failed.
DETAIL: Detailed error cause
Another AdvancedCopy Manager command may be useing the specified device. If DETAIL indicates an swstxxxx message, take action based on the message.
It failed in the lock AdvancedCopy Manager Commands. DETAIL
An attempt to lock the command has failed.
DETAIL: Detailed error cause
Another AdvancedCopy Manager command may be running. If DETAIL indicates an swstxxxx message, take action based on the message.
It failed in the unlock AdvancedCopy Commands. DETAIL
An attempt to unlock the command has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
It failed in the getting device name in the Loggroup. DETAIL
An attempt to acquire device information in the log group has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
It failed in the getting backup volume information. DETAIL
An attempt to acquire the backup volume information has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
System call error: DETAIL
A system call error occurred.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
It failed in AdvancedCopy Manager. DETAIL
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Cannot get information from tboserver file. DETAIL
An attempt to acquire the tape server information file has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
This server is not matched with a tape server.
Correlation of this server with the tape server is not set.
DETAIL: Detailed error cause
Run the acmsvrset command and then rerun it.
This server is not Storage Management Server. DETAIL
Servers other than the Storage management server cannot use this command format.
DETAIL: Detailed error cause
Check the command format and then rerun the command in the correct format.
The lock file does not exist. DETAIL
The lock file does not exist.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Checking the existence of lock process failed. DETAIL
An attempt to check the existence of the lock process has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Cannot delete the lock file. DETAIL
An attempt to delete the lock file has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The error occurred by the access to management information. DETAIL
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Internal contradiction detected it in managed information. DETAIL
An internal contradiction occurred in management information.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Code conversion error occurred. DETAIL
An attempt to convert the character code has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Shortage of memory occurred. DETAIL
Insufficient memory.
DETAIL: Detailed error cause
Check if there is enough memory space according to "Installing the AdvancedCopy Manager agent" in the AdvancedCopy Manager Installation Guide corresponding to the OS for the Storage server. If there is not enough memory space, increase the memory capacity and then rerun.
If there is enough memory space, collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Cannot make the lock file. DETAIL
An attempt to create a lock file has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The information about the specified value is not found. DETAIL
Information related to the specified value does not exist.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Internal command error. DETAIL
An error occurred in the internal command.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Content of file is illegal. DETAIL
The contents of the file are invalid.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The error Occurred at OPC copy. DETAIL
The tape backup cannot be made because the OPC physical copy was unsuccessful.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The specified server is not a tape server. DETAIL
The specified server is not the tape server.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
There are not history in the disk and the tape. DETAIL
The specified backup history does not exist.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Please execute it by the root user.
Run it as the root user.
Log in again as the root user and then rerun it.
Backup history not found. DETAIL
The backup history was not found.
DETAIL: Detailed error cause
Check if the specified backup history exists. If the specified backup history does not exist, specify an existing backup history.
Storage server does not exist. DETAIL
Storage server information does not exist.
DETAIL: Detailed error cause
Check if the Storage server environment is set up.
Tape backup policy exists. DETAIL
The tape backup policy exists.
DETAIL: Detailed error cause
Delete the tape backup policy and then rerun.
Restore for the specified Restore Device Name is not being executed.
Restoration was not performed for the specified restoration destination device (name).
DETAIL: Detailed error cause
Check if the specified device is correct. Also check if restoration is being performed for the specified device. If restoration is not being performed, no other action is required. If restoration is being performed, collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
An internal error occurred by the file.
An internal contradiction occurred in the registry file.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Illegal Arguments.
An argument error occurred during internal processing.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The command failed on the tape server.
An error occurred on the tape server.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
TapeBackup policy exists.
The tape backup policy exists.
DETAIL: Detailed error cause
Delete the tape backup policy and then rerun.
Transmission of a file failed.
An attempt to transmit the file has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Restore device is incorrect. DETAIL
The specified restoration destination device is incorrect.
DETAIL: Detailed error cause. Either the following is displayed.
device information is changed.
It is a Backup volume in use.
Mount-point is changed.
Mounted.
This command cannot be run because the logical volume spans multiple physical volumes. Logical Volume Name=[VOLUME]"
Take appropriate action based on the message indicated in DETAIL.
|
Message indicated in DETAIL |
Appropriate action |
|---|---|
|
device information is changed. |
The contents of the AdvancedCopy Manager device information file are inconsistent with the system device configuration. |
|
It is a Backup volume in use. |
Re-execute the restoration operation by specifying other device as the restoration destination, or delete the backup histories of the specified backup volume. |
|
Mount-point is changed. |
Obtain information of all devices with AdvancedCopy Manager and re-execute. |
|
Mounted. |
Unmount the restoration device and re-execute processing. |
|
This command cannot be run because the logical volume spans multiple physical volumes. Logical Volume Name=[VOLUME]" |
Configuration information of a logical volume was changed after the volume was registered with the backup management function. Refer to the following manual, change device information accordingly, and reexecute the command: |
tbod start failed, invalid option specified.
An attempt to start the tape server daemon has failed because an invalid option was specified.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Also collect the /etc/init.d/FJSVswstm file on the tape server.
tbod start failed, cannot fork (errno = ERRNO).
An attempt to start the tape server daemon has failed because the fork system call resulted in an error.
ERRNO: Error number
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
tbod start failed, cannot create FILE (errno = ERRNO).
An attempt to start the tape server daemon has failed because the creat system call resulted in an error.
FILE: File name
ERRNO: Error number of the creat system call
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
tbod start failed, already started.
The tape server daemon is already started.
The system administrator requires no other action.
tbod start failed, cannot lock FILE (errno = ERRNO).
An attempt to start the tape server daemon has failed because the file could not be locked.
FILE: File name
ERRNO: Error number
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
tbod start failed, check configuration file failed, cannot popen COMMAND (errno = ERRNO).
An attempt to start the tape server daemon has failed because the configuration file could not be checked.
COMMAND: Check command name
ERRNO: Error number
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
tbod start failed, tbocheckconf error. (DETAIL)
An attempt to start the tape server daemon has failed because the description of the configuration file is incorrect.
DETAIL: Detailed error cause
Describe the configuration file correctly, and then restart the tape server daemon.
For information about how to describe the configuration file, see "Initializing the Tape Server" in the ETERNUS SF AdvancedCopy Manager Tape Backup Installation Guide.
tbod start failed, FILE is invalid format or size.
An attempt to start the tape server daemon has failed because the management information file of the tape server is invalid.
FILE: Management information file name
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
tbod start failed, FILE is not ordinary file.
An attempt to start the tape server daemon has failed because the management information file of the tape server is invalid.
FILE: Management information file name
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
tbod start failed, Version information doesn't correspond. The version of FILE is VERS1 although the version of tbod is VERS2.
An attempt to start the tape server daemon has failed because the version of tape server management information is incompatible with the version of the installed
AdvancedCopy Manager.
FILE: Management information file name
VERS1: Version of tape server management information
VERS2: Version of AdvancedCopy Manager
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Request end abnormally, signal SIGNO caught.
This request will end abnormally because an invalid signal was received.
SIGNO: Signal number
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Signal(SIGNO) is caught, tbod will be down.
The tape server daemon will stop because it received an invalid signal.
SIGNO: Signal number
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
tbod start failed, the initialization of the Backup Management file(FILE) error occurred. Cannot SYSCALL (errno = ERRNO).
An attempt to start the tape server daemon has failed because the management information file could not be initialized.
FILE: Management information file name
SYSCALL: System call name
ERRNO: Error number
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
tbod start failed, the initialization processing error occurred. Cannot SYSCALL (errno = ERRNO).
An attempt to start the tape server daemon has failed because an error occurred during initialization processing.
SYSCALL: System call name
ERRNO: Error number
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
When the -OPT1 option is specified, it is necessary to be specified the -OPT2 option.
Specify the OPT1 option with the OPT2 option.
OPT1: Specified option
OPT2: Option you must specify with OPT1
Specify the -OPT2 option and then rerun the command.
When the -OPT1 option is specified, it cannot be specified the -OPT2 option.
You cannot specify the OPT1 option and OPT2 option at the same time.
OPT1: Specified option
OPT2: Option you cannot specify with OPT1
Specify the correct option in the command and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
This command is executable by only the root user.
Only a root user can run this command.
Log in again as a root user and then rerun the command.
An incorrect option was specified.
An incorrect option was specified.
Specify the correct option in the command and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
Too many -OPT option were specified.
Too many options were specified.
OPT: Duplicated option
Specify the correct options in the command and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
Necessary option was not specified.
A required option is not specified.
Specify the correct option in the command and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
The argument of the -OPT option was invalid.
The value specified in the option argument is invalid.
OPT : Invalid option argument
Specify the correct option argument in the command and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
Too many operands were specified.
Too many arguments are specified.
Specify the command in the correct format and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
Necessary operand was not specified.
Not enough arguments are specified in the command.
Specify the command in the correct format and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
The operand was invalid. operand="OPERAND"
An invalid value was specified in the argument.
OPERAND: Invalid argument
Specify the correct argument in the command and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
Failed to allocate memory.
An attempt to allocate memory has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Storage server does not exist.
The specified Storage server is not registered.
Register the Storage server or specify the correct Storage server name.
Device does not exist.
The specified transaction volume is not registered.
Register the transaction volume or specify the correct transaction volume name.
Loggroup does not exist.
The specified log group is not registered.
Register the transaction volume that belongs to the log group or specify the correct log group name.
It failed in the access of the registry of AdvancedCopy Manager(DETAIL).
An attempt to acquire configuration management information has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
It failed in the change code transfer.
An attempt to convert the character code has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Internal error occurred. DETAIL
An internal error occurred.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Cannot get the Backup Management file(KIND) of tape server.
An attempt to acquire tape server management information has failed.
KIND: Management information type
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Cannot lock the Backup Management file(KIND) of tape server.
An attempt to lock tape server management information has failed.
KIND: Management information type
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Cannot update the Backup Management file(KIND) of tape server.
An attempt to update tape server management information has failed.
KIND: Management information type
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Cannot be specified the device which belongs to a Loggroup.
You cannot individually specify devices in the log group.
Specify the log group and then rerun.
This device is used, or the exclusion of the device failed.
The device is being used or an attempt to exclude the device has failed.
Check if a process is being performed by using the execution status display command. If there is a process being performed, wait until the process is completed and then rerun. If there is no process being performed and this error occurs despite the rerun, collect the materials required for troubleshooting, and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The exclusion release of the device failed.
An attempt to release device exclusion has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The device is busy.
The device is being used.
Check if a process is being performed by using the execution status display command. If there is a process being performed, wait until the process is completed and then rerun. If there is no process being performed and this error occurs despite the rerun, collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Cannot connect with tape server daemon.
An attempt to communicate with the tape server daemon has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
TSM error occurred. (DETAIL).
An error occurred in TSM.
DETAIL: Detailed error cause
Messages beginning with "DCF" or "ANS" in DETAIL are TSM error messages. For "Explanation" and "System administrator response" of the messages beginning with "DCF," see the Specific Device Access Command User's Guide, which is a TSM manual. For "Explanation" and "System administrator response" of the messages beginning with "ANS," see the Messages.
fork() failed.
An attempt to generate a process has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
This request is terminated, because the tape server daemon was stopped.
This request is terminated because the tape server daemon was stopped.
If you want to rerun this request, restart the tape server daemon and then rerun this request.
This request is terminated, because the cancel command is executed.
This request is terminated because the cancel command was run.
The system administrator requires no other action.
Cannot set the signal handler.
An attempt to set the signal handler has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The device was not transaction volume.
The target device is not a transaction volume.
Reregister the target device as a transaction volume or specify an existing transaction volume.
It failed in reading the "FILE" file. DETAIL
An attempt to read the configuration file has failed.
FILE: Configuration file name
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The "FILE" file does not exist.
The configuration file does not exist.
FILE: Configuration file name
Create a configuration file.
For information about how to describe the configuration file, see "Initializing the Tape Server" in the AdvancedCopy Manager Tape Backup Installation Guide.
Invalid data is specified in the "FILE" file.
Description of the configuration file is incorrect.
FILE: Configuration file name
Correct the configuration file.
For information about how to describe the configuration file, see "Initializing the Tape Server" in the AdvancedCopy Manager Tape Backup Installation Guide.
cannot create "FILE" file. DETAIL
An attempt to create an internal file has failed.
FILE: Internal file name
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Some processing related to the tape backup is being executed.
Processing related to the tape backup is being performed.
Wait until all processing related to the tape backup is completed and then rerun.
Tape server daemon is running.
The tape server daemon is running.
Stop the tape server daemon and then rerun.
For information about how to stop the tape server daemon, see "Starting and Stopping the Tape Server Daemon" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The directory "DIR" does not exist.
The specified directory does not exist.
DIR: Directory name
Specify an existing directory and then rerun.
TSM administrative information Backup failed. DETAIL
An attempt to back up TSM administrative information has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
TSM DB Backup failed. DETAIL
An attempt to back up the TSM database has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
ACM administrative information Backup failed. DETAIL
An attempt to back up administrative information about the AdvancedCopy Manager tape manager has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
TSM administrative information restore failed. DETAIL
An attempt to restore TSM administrative information has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
TSM DB restore failed. DETAIL
An attempt to restore the TSM database has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
ACM administrative information restore failed. DETAIL
An attempt to restore administrative information about the AdvancedCopy Manager tape manager has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Tape server package is not installed.
The tape server package is not installed.
Install the tape server package according to the ETERNUS SF AdvancedCopy Manager Tape Backup Installation Guide.
Necessary option was not specified by the first setting. option=OPT
The required option was not specified in the command when the command was run the first time.
OPT: Required option
Specify the correct argument in the command and then rerun the command. For details on commands, see the following manual:
"Various Commands" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
Storage Pool does not exist. poolname=POOLNAME
The specified storage pool does not exist.
POOLNAME: Storage pool name
Create a storage pool or specify an existing storage pool and then rerun.
Backup management class is not set.
The specified tape backup management class is not set.
Set the specified tape backup management class or specify the set backup management class and then rerun.
Tape backup policy is not set.
The tape backup policy is not set.
Set the tape backup policy and then rerun.
Pretreatment failed. DETAIL
Preprocessing failed.
DETAIL: Detailed error cause
Take appropriate action according to "Error Codes of Preprocessing Script and Postprocessing Script" in this manual.
Posttreatment failed. DETAIL
Postprocessing failed.
DETAIL: Detailed error cause
Take appropriate action according to "Error Codes of Preprocessing Script and Postprocessing Script" in this manual.
Writing to the tape media failed. [DETAIL]
An attempt to write data to the tape has failed.
DETAIL: Detailed error cause
Messages beginning with "DCF" or "ANS" in DETAIL are TSM error messages. For "Explanation" and "System administrator response" of the messages beginning with "DCF," see the Specific Device Access Command User's Guide, which is a TSM manual. For "Explanation" and "System administrator response" of the messages beginning with "ANS," see the Messages.
The device composition has changed since last registered information.
Transaction volume cabinet information (cabinet identifier, OLU, EXTENT starting position, or EXTENT size) has changed.
Delete the transaction volume and then retrieve the device information again.
For details, see "Changing the Device Composition" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
It failed in transfer of recovery control file. DETAIL
An attempt to transfer the recovery control file has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The recovery control file is not found.(file=FILE)
The recovery control file does not exist.
FILE: Recovery control file name
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The specified backup history does not exist.
The specified backup history does not exist.
Check if the backup history is correctly specified.
Reading to the tape media failed. [DETAIL]
An attempt to read data from the tape has failed.
DETAIL: Detailed error cause
Messages beginning with "DCF" or "ANS" in DETAIL are TSM error messages. For "Explanation" and "System administrator response" of the messages beginning with "DCF," see the Specific Device Access Command User's Guide, which is a TSM manual. For "Explanation" and "System administrator response" of the messages beginning with "ANS," see the Messages.
The specified transfer device does not exist.
The specified restoration destination device is not registered.
Register the specified restoration destination device or specify a registered device and then rerun.
The specified transfer device cannot be specified.
The specified restoration destination device cannot be specified as the restoration destination.
Specify a volume that can be specified as the restoration destination. For information about the volumes that can be specified as the restoration destination, see "Restoration execution command (acmrestore)" or "Tape restoration execution command (tborestore)" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The physical IPaddress file does not exist.
The specified physical IP address file does not exist.
Specify the correct physical IP address file name and then rerun.
It failed in reading the physical IPaddress file. DETAIL
An attempt to read the physical IP address file has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Tape Backup Policy cannot be deleted. The device has the backup history.
The tape backup policy cannot be deleted because the backup history exists.
Delete all the backup histories from the target transaction volume tape and then rerun.
Tape Backup Policy cannot be deleted. The device has the running process.
The tape backup policy cannot be deleted because there is a process being performed.
Wait till all the processes of the target transaction volume are completed and then rerun.
TapeCopy request accept fail. DETAIL
An attempt to receive the tape copy request has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Resource data for loggroup does not match.
Resource information in the log group is inconsistent. You cannot recover backup history where the reference dump and normal dump coexist.
Specify a backup history where the reference dump and normal dump do not coexist and then recover the history.
Source not correspond to destination about device size.
The size of the device specified as the restoration destination is less than the size of the backup data to be restored.
Specify a device whose size is greater than or equal to the backup data size as the restoration destination.
Failed in recovery of SymfoWARE/RDB, mismatched recovery mode.
An attempt to recover Symfoware/RDB has failed because the recovery end point specified in the recovery is incorrect.
Specify the correct recovery end point and then rerun the recovery.
Cannot change to another Device Type. This is because TapeBackup Policy exists in this Transaction Volume. Device Name=[DEVICE]
The device cannot be changed to another device type because the tape backup policy exists in the transaction volume.
DEVICE: Device name
Delete the tape backup policy and then rerun.
Cannot change Server. This is because Backup Management Class or Tape Backup Policy exists in this Tape Server.
The tape server cannot be changed because the backup management classes or backup policies exist in the tape server.
Delete all the backup management classes and backup policies of the Storage server managed by the tape server and then reattempt to change the tape server.
The storage server name has changed since last registered information.
The Storage server name is changed.
See "Changing the Storage Server Name" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Failed in delete recovery control file. DETAIL
An attempt to delete the recovery control file on the tape server has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Cannot get the Backup volume information. DETAIL
An attempt to acquire the backup volume information has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Failed in request not accepted. DETAIL
An attempt to accept the request has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Failed in terminated execution process.
An attempt to terminate the execution process has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
It failed in the access of the GRAPI. DETAIL.
An attempt to acquire volume information has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Invalid data is specified in the file "tsmbkfile". FILE
The file specified in the tsmbkfile file does not exist.
FILE: File name
Change the file name specified in the tsmbkfile file to an existing file name and then rerun.
The RAID device is busy.
The specified ETERNUS3000 is now busy.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Timeout occurred.
A timeout occurred during communication with the specified ETERNUS3000.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Connection to IPADDR failed.
An attempt to connect to the IP address of the specified ETERNUS3000 has failed.
IPADDR: IP address
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Data transfer failed.
An attempt to transfer data to the specified ETERNUS3000 has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
IPADDR is not the managed RAID device.
The IP address of the specified ETERNUS3000 is not managed by the tape server.
IPADDR: IP address
See "Adding ETERNUS storage system" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Failed in read the logical device path.
An attempt to acquire the access path has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
The RAID device can not be recognized.
This RAID device is not supported.
Specify a RAID device supported by AdvancedCopy Manager.
Getting information from the RAID device failed.(DETAIL).
An attempt to acquire RAID device information has failed.
DETAIL: Detailed error cause
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
IPADDR is not target.
The specified IP address is not an IP address of ETERNUS3000.
IPADDR: IP address
This command need not be run for any RAID devices other than ETERNUS3000.
Backup Management Class cannot be deleted. There is Tape Backup Policy using a Backup Management Class to delete.
This tape backup management class cannot be deleted because there are backup policies where it is set.
Delete all the backup policies where this tape backup management class is set and then delete this class.
Update of /var/opt/FJSVmplb/mplb_ext.conf failed.
An attempt to update the /var/opt/FJSVmplb/mplb_ext.conf file has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
/var/opt/FJSVmplb/mplb_ext.conf cannot recover.
An attempt to recover the /var/opt/FJSVmplb/mplb_ext.conf file has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Failed in processing on a Storage Server.(DETAIL)
An attempt to perform processing on the Storage server has failed.
DETAIL: Detailed error cause
Take appropriate action based on the message indicated in DETAIL.
Cannot copy a disk backup history to tape. This is because backup history already exists in this Tape Server. Device Name=[DEVICE NAME], Version Number=[NUMBER]
This disk backup history cannot be copied to the tape because it already exists on the tape server.
DEVICE NAME: Device name
NUMBER: Absolute generation number
The backup history specified as the copy target already exists on the tape server. Run the history information display command to check the absolute generation number. For details on the history information display command, see the following manual:
"History Information Display Command" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option
Making the error message failed.
An attempt to create an error message has failed.
Collect the materials required for troubleshooting and then call your Fujitsu systems engineer.
For information about the materials required for troubleshooting, see "Method for Collecting Maintenance Materials" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for Tape Backup Option.
Setup of the Tape Server cluster for the primary node is complete. Next, create the cluster environment of the secondary node.
Setup of the Tape Server cluster for the primary node is complete.
Finishes processing.
Perform the next step in the procedure for creating the Tape Server cluster environment.
Setup of the Tape Server cluster for the secondary node is complete.
Setup of the Tape Server cluster for the secondary node is complete.
Finishes processing.
Perform the next step in the procedure for creating the Tape Server cluster environment.
The Tape Server cluster of the primary node has been deleted.
The Tape Server cluster of the primary node has been deleted successfully.
Finishes processing.
Perform the next step in the procedure for deleting the Tape Server cluster environment.
The Tape Server cluster of the secondary node has been deleted. Next, delete the cluster environment of the primary node.
The Tape Server cluster of the secondary node has been deleted successfully.
Finishes processing.
Perform the next step in the procedure for deleting the Tape Server cluster environment.
The processing was canceled.
Processing was canceled.
Cancels processing.
None.
No cluster environment with the node name (name) has been created.
The cluster setup for the Storage Management Server transaction or Storage Server transaction is not complete on the specified logical node.
name:Specified logical node name
Cancels processing.
Check whether cluster setup for the Storage Management Server transaction or Storage Server transaction has completed on the specified logical node.
For cluster setup of the Storage Management Server Transactions and the Storage Server Transactions, see "Preparations for Customizing Storage Management Server Transactions, Storage Server Transactions, and Tape Server Transactions" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for cluster environment.
The Tape Server cluster setup is complete.
The cluster for the Tape Server has been set up already.
Cancels processing.
Check whether the logical node name duplicates the name of a Storage Management Server transaction or a Storage Server transaction.
Ensure that AdvancedCopy Manager shared disks that are being used by another cluster system have not been mounted.
A cluster system environment has been created in CLUSTERSYSTEM
An environment has been created in a cluster system other than PRIMECLUSTER.
CLUSTERSYSTEM:The name of the cluster system that has already been created
MSCS:MSCS
MCSG:MC/ServiceGuard
VCS : VERITAS Cluster Server
Cancels processing.
Tape Servers do not support cluster systems other than PRIMECLUSTER.
If Tape Servers are operated on cluster systems, create the cluster systems using PRIMECLUSTER.
The Tape Server setup of the primary node is not complete.
The cluster setup for the Tape Server on the primary node has not completed.
Cancels processing.
Run the command again after the cluster setup for the Tape Server on the primary node has completed.
The Tape Server setup of the secondary node is not complete.
The cluster setup for the Tape Server on the secondary node has not completed.
Cancels processing.
Run the command again after the cluster setup for the Tape Server on the secondary node has completed.
The Tape Server cluster environment of the secondary node has not been deleted.
The Tape Server cluster environment for the secondary node has not been deleted.
Cancels processing.
Run the command again after the cluster environment for the Tape Server on the secondary node has been deleted.
Do not mount the shared disk.
The shared disk has not been mounted.
Cancels processing.
Check whether the shared disk has been mounted to the correct mount point, and then rerun the command.
To set up a Tape Server transaction on a Storage Management Server transaction, ensure that the DB file system has also been mounted correctly.
Tape server daemon is runnning.
The Tape Server daemon is running.
Cancels processing.
Stop the Tape Server daemon, and then rerun the command.
No cluster environment setting file exists. File Name = FILE
The cluster environment setting file does not exist.
FILE:The name of the cluster environment setting file
Cancels processing.
Check whether the shared disk has been mounted to the correct mount point, and then rerun the command.
Cluster information is not found . File Name = FILE Secction = SECTIONNAME Key = KEYNAME
Cluster information cannot be found.
FILE:The name of the file from which information was obtained
SECTIONNAME:Section name
KEYNAME:Key name
Cancels processing.
Refer to the following manual, collect the data necessary to resolve the error, and then contact a Fujitsu systems engineer.
"How to collect maintenance data" in the Eternus SF AdvancedCopy Manager Operator's Guide
Failed to acquire information from the cluster file. Error Code = CODE, File Name = FILE
Information could not be obtained from the cluster environment setting file.Error Code=CODE, File Name=FILE
CODE:Error code
FILE:Cluster file name
Cancels processing.
Check access permissions and the amount of free disk space, and ensure that no other processes are using the file, and then rerun the command.
Failed to create the cluster file. Error Code=CODE, File Name=FILE
The cluster environment setting file called FILE could not be created.
CODE:Error code
FILE:The name of the cluster environment setting file
Cancels processing.
Check access permissions and the amount of free disk space, and then rerun the command.
Failed to set up information in the cluster file. Error Code = CODE, File Name = FILE
Information could not be set in the cluster environment setting file.
CODE:Error code
FILE:Cluster file name
Cancels processing.
Check access permissions and the amount of free disk space. Ensure that no other processes are using the file, and then rerun the command.
Failed to delete the cluster file. Error Code = CODE, File Name = PATH
The cluster file could not be deleted.
CODE:Error code
PATH:The path to the cluster file
Continues processing.
Check the access permissions for the file, and then rerun the command.
Failed to create a directory. Directory = DIRECTORY
A directory could not be created.
DIRECTORY:Directory path
Cancels processing.
Check access permissions and the amount of free disk space, and then rerun the command.
Failed to copy the directory. Source Directory=[SOURCE DIRECTORY], Target Directory=[TARGET DIRECTRY]
A directory could not be copied.
SOURCE DIRECTORY : Copy source directory
TARGET DIRECTORY : Copy destination directory
Cancels processing.
Check access permissions and the amount of free disk space. Also check whether the directories exist, and then rerun the command.
Failed to delete the directory. Directory=DIRECTORY
A directory could not be deleted.
DIRECTORY : Directory
Cancels processing.
Check access permissions and whether the directories exist, and then rerun the command.
Failed to move the directory. Source Directory=SOURCE DIRECTORY] Target Directory=TARGET DIRECTORY
A directory could not be moved.
SOURCE DIRECTORY : Source directory
TARGET DIRECTORY : Destination directory
Cancels processing.
Check access permissions and the amount of free disk space. Also check whether the directories exist, and then rerun the command.
Failed to create a link. Source Path=[SOURCE PATH], Target Path=[TARGET PATH]
A link could not be created.
SOURCE PATH : Link source
TARGET PATH : Link destination
Cancels processing.
Check access permissions and the amount of free disk space. Also check whether the directories exist, and then rerun the command.
Failed to delete the link. Target Path=[TARGET PATH]
A link could not be created.
TARGET PATH : Link path
Cancels processing.
Check access permissions and the amount of free disk space. Also check whether the directories exist, and then rerun the command.
Processing is interrupted because the signal was received.
Cancels processing because a signal has been received.
Cancels processing.
Ensure that no other commands are executing, and then rerun the command.
Cannot write command trace information to the logging file. Temporary Log File=LOGFILE
Trace information for the setup command could not be written to the log file.Log information has been temporarily output to the temporary log file LOGFILE.
LOGFILE : Path to the temporary log file
Cancels processing.
Eliminate the cause of the error indicated by the error message output immediately before this message, and then rerun the command.
The Tape Server setup/unsetup command is already running.
The Tape Server setup or unsetup command is already running.
Cancels processing.
Ensure that the Tape Server setup or unsetup command is not running, and then rerun the command.
The Tape Server setup is not complete.
The Tape Server cluster setup has not completed for the specified logical node.
Cancels processing.
The Tape Server cluster setup for the specified logical node may not have been performed or may have been interrupted.
Rerun the command after cluster setup for the Tape Server has completed on the node where the command is executed.
For cluster setup of the tape server, see "Customizing Tape Server Transactions" in the ETERNUS SF AdvancedCopy Manager Operator's Guide for cluster environment.
|
Contents
Index
|