| ETERNUS SF AdvancedCopy Manager Operator's Guide for cluster environment 13.0 -Microsoft(R) Windows(R) 2000/Microsoft(R) Windows Sever(TM) 2003-, -Solaris-, -HP-UX-, -Linux-, -AIX- |
|
Contents
Index
|
This appendix explains how to create AdvancedCopy Manager resources and userApplications with PRIMECLUSTER.
For details, see the "Building Cluster Applications" chapter in the "PRIMECLUSTER Installation and Administration Guide."
Execute the hvw command to start the RMS Wizard, and create resources and userApplications.
Example of starting the RMS Wizard with "acmeng" specified as the configuration file name
# /opt/SMAW/SMAWRrms/bin/hvw -n acmeng |
The Main configuration menu as shown below is displayed.
f250-1: Main configuration menu, current configuration: acmeng No RMS active in the cluster 1) HELP 10) Configuration-Remove 2) QUIT 11) Configuration-Freeze 3) Application-Create 12) Configuration-Thaw 4) Application-Edit 13) Configuration-Edit-Global-Settings 5) Application-Remove 14) Configuration-Consistency-Report 6) Application-Clone 15) Configuration-ScriptExecution 7) Configuration-Generate 16) RMS-CreateMachine 8) Configuration-Activate 17) RMS-RemoveMachine 9) Configuration-Copy Choose an action: |
Create a userApplication and resources by following the procedure below.
Select "Application-Create" from the Main configuration menu.
f250-1: Main configuration menu, current configuration: acmeng No RMS active in the cluster 1) HELP 10) Configuration-Remove 2) QUIT 11) Configuration-Freeze 3) Application-Create 12) Configuration-Thaw 4) Application-Edit 13) Configuration-Edit-Global-Settings 5) Application-Remove 14) Configuration-Consistency-Report 6) Application-Clone 15) Configuration-ScriptExecution 7) Configuration-Generate 16) RMS-CreateMachine 8) Configuration-Activate 17) RMS-RemoveMachine 9) Configuration-Copy Choose an action: 3 |
Select "CRM" from the Application type selection menu.
Creation: Application type selection menu: 1) HELP 7) GENERIC 2) QUIT 8) SYMFOWARE 3) RETURN 4) OPTIONS 5) CRM 6) DEMO Application Type: 5 |
The "CRM" turnkey wizard as shown below is displayed.
Settings of turnkey wizard "CRM" 1) HELP 4) REMOVE+EXIT 7) Machines+Basics(-) 2) NO-SAVE+EXIT 5) ApplicationName=APP1 3) SAVE+EXIT 6) BeingControlled=no Choose the setting to process: |
Change the userApplication name.
Depending on the operation, change the userApplication name. If the userApplication name is not changed, this operation is not required.
Select "ApplicationName" in turnkey wizard "CRM".
Settings of turnkey wizard "CRM" 1) HELP 4) REMOVE+EXIT 7) Machines+Basics(-) 2) NO-SAVE+EXIT 5) ApplicationName=APP1 3) SAVE+EXIT 6) BeingControlled=no Choose the setting to process: 5 |
Select "FREECHOICE."
1) HELP 2) RETURN 3) FREECHOICE 4) APP1 Enter the name of this application: 3 |
Enter the userApplication name.
"agent_service" is used as the userApplication name in the following example.
1) HELP
2) RETURN
3) FREECHOICE
4) APP1
Enter the name of this application: 3
>> agent_service |
Press the Enter key. The [turnkey wizard "CRM"] window is displayed again.
Settings of turnkey wizard "CRM" 1) HELP 5) ApplicationName=AGENT_SERVICE 2) NO-SAVE+EXIT 6) BeingControlled=no 3) SAVE+EXIT 7) Machines+Basics(-) 4) REMOVE+EXIT Choose the setting to process: |
Specify the userApplication configuration. Be sure to define the userApplication for standby operation.
Select "Machines+Basics" in the turnkey wizard "CRM".
Settings of turnkey wizard "CRM" 1) HELP 5) ApplicationName=AGENT_SERVICE 2) NO-SAVE+EXIT 6) BeingControlled=no 3) SAVE+EXIT 7) Machines+Basics(-) 4) REMOVE+EXIT Choose the setting to process: 7 |
Select "AdditionalMachine," and specify the secondary node.
Machines+Basics (agent_service:consistent) 1) HELP 10) (PostOnlineScript=) 19) (OnlinePriority=) 2) - 11) (PreOfflineScript=) 20) (StandbyTransitions=) 3) SAVE+EXIT 12) (OfflineDoneScript=) 21) (LicenseToKill=no) 4) REMOVE+EXIT 13) (FaultScript=) 22) (AutoBreak=yes) 5) AdditionalMachine 14) (AutoStartUp=no) 23) (HaltFlag=no) 6) AdditionalConsole 15) (AutoSwitchOver=No) 24) (PartialCluster=0) 7) Machines[0]=f250-1RMS 16) (PreserveState=no) 25) (ScriptTimeout=) 8) (PreCheckScript=) 17) (PersistentFault=0) 9) (PreOnlineScript=) 18) (ShutdownPriority=) Choose the setting to process: 5 |
Select the secondary node. f250-2RMS is selected for the secondary node in the following example.
1) HELP 2) RETURN 3) f250-1RMS 4) f250-2RMS Choose a machine for this application: 4 |
Specify attributes.
Depending on the operation mode, also specify the userApplication attributes. For information on userApplication attributes, see the "Creating Standby Cluster Applications" section in the "PRIMECLUSTER Installation and Administration Guide."
The "AutoSwitchOver" attribute is set to "automatically cause a failover in the event of node failure, resource failure, or node termination" in the following example.
Machines+Basics (agent_service:consistent) 1) HELP 10) (PreOnlineScript=) 19) (ShutdownPriority=) 2) - 11) (PostOnlineScript=) 20) (OnlinePriority=) 3) SAVE+EXIT 12) (PreOfflineScript=) 21) (StandbyTransitions=) 4) REMOVE+EXIT 13) (OfflineDoneScript=) 22) (LicenseToKill=no) 5) AdditionalMachine 14) (FaultScript=) 23) (AutoBreak=yes) 6) AdditionalConsole 15) (AutoStartUp=no) 24) (HaltFlag=no) 7) Machines[0]=f250-1RMS 16) (AutoSwitchOver=No) 25) (PartialCluster=0) 8) Machines[1]=f250-2RMS 17) (PreserveState=no) 26) (ScriptTimeout=) 9) (PreCheckScript=) 18) (PersistentFault=0) Choose the setting to process: 16 |
Select HOSTFAILURE(H).
Set flags for AutoSwitchOver: Currently set: NO (N) 1) HELP 4) DEFAULT 7) RESOURCEFAILURE(R) 2) - 5) NO(N) 8) SHUTDOWN(S) 3) SAVE+RETURN 6) HOSTFAILURE(H) Choose one of the flags: 6 |
Select RESOURCEFAILURE(R).
Set flags for AutoSwitchOver: Currently set: HOSTFAILURE (H) 1) HELP 4) DEFAULT 7) RESOURCEFAILURE(R) 2) - 5) NO(N) 8) SHUTDOWN(S) 3) SAVE+RETURN 6) HOSTFAILURE(H) Choose one of the flags: 7 |
Select SHUTDOWN(S).
Set flags for AutoSwitchOver: Currently set: HOSTFAILURE,RESOURCEFAILURE (HR) 1) HELP 4) DEFAULT 7) RESOURCEFAILURE(R) 2) - 5) NO(N) 8) SHUTDOWN(S) 3) SAVE+RETURN 6) HOSTFAILURE(H) Choose one of the flags: 8 |
Select SAVE+RETURN.
Set flags for AutoSwitchOver: Currently set: HOSTFAILURE,RESOURCEFAILURE,SHUTDO WN (HRS) 1) HELP 4) DEFAULT 7) RESOURCEFAILURE(R) 2) - 5) NO(N) 8) SHUTDOWN(S) 3) SAVE+RETURN 6) HOSTFAILURE(H) Choose one of the flags: 3 |
After specifying all of the attributes completely, select SAVE+EXIT.
Machines+Basics (agent_service:consistent) 1) HELP 2) - 3) SAVE+EXIT 4) REMOVE+EXIT 5) AdditionalMachine 6) AdditionalConsole 7) Machines[0]=f250-1RMS 8) Machines[1]=f250-2RMS 9) (PreCheckScript=) 10) (PreOnlineScript=) 11) (PostOnlineScript=) 12) (PreOfflineScript=) 13) (OfflineDoneScript=) 14) (FaultScript=) 15) (AutoStartUp=yes) 16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown) 17) (PreserveState=no) 18) (PersistentFault=0) 19) (ShutdownPriority=) 20) (OnlinePriority=) 21) (StandbyTransitions=) 22) (LicenseToKill=no) 23) (AutoBreak=yes) 24) (HaltFlag=yes) 25) (PartialCluster=0) 26) (ScriptTimeout=) Choose the setting to process: 3 |
Press the Enter key to return to the [turnkey wizard "CRM"] window.
Settings of turnkey wizard "CRM" 1) HELP 9) CRM(-) 2) - 10) LocalFileSystems(-) 3) SAVE+EXIT 11) RemoteFileSystems(-) 4) - 12) IpAddresses(-) 5) ApplicationName=AGENT_SERVICE 13) RawDisks(-) 6) Machines+Basics(agent_service) 14) LVM-VolumeManagement(-) 7) CommandLines(-) 15) Gds:Global-Disk-Services(-) 8) Controllers(-) 16) Gls:Global-Link-Services(-) Choose the setting to process: |
Define the Fsystem resources.
Before the Fsystem resources can be defined, the mount point must be specified in /etc/fstab on all nodes making up the userApplication. For details on how to define the resources, refer to the "Setting Up Fsystem Resources" section in the "PRIMECLUSTER Installation and Administration Guide."
Do not specify a file system because AdvancedCopy Manager data exists.
Select "LocalFileSystems" in the turnkey wizard "CRM".
Settings of turnkey wizard "CRM" 1) HELP 9) CRM(-) 2) - 10) LocalFileSystems(-) 3) SAVE+EXIT 11) RemoteFileSystems(-) 4) - 12) IpAddresses(-) 5) ApplicationName=AGENT_SERVICE 13) RawDisks(-) 6) Machines+Basics(agent_service) 14) LVM-VolumeManagement(-) 7) CommandLines(-) 15) Gds:Global-Disk-Services(-) 8) Controllers(-) 16) Gls:Global-Link-Services(-) Choose the setting to process: 10 |
Select AdditionalMountPoint.
File systems (Lfs_AGENT_SERVICE:not yet consistent) 1) HELP 4) REMOVE+EXIT 7) (Timeout=180) 2) - 5) AdditionalMountPoint 3) SAVE+EXIT 6) (Filter=) Choose the setting to process: 5 |
Register the mount point of the shared disk for AdvancedCopy Manager shared data.
For a Storage management server transaction, also register the mount point of the shared disk for the AdvancedCopy Manager repository.
To register multiple mount points, repeat steps b to d as many times as the number of mount points to be registered.
Select the mount point to be registered.
/acm_mnt/acmagt is set in the following example.
1) HELP 5) /acm_mnt/acmagt 2) RETURN 6) /acm_mnt/acmmgr 3) FREECHOICE 4) ALL Choose a mount point: 5 |
Select SAVE+RETURN.
Set flags for mount point: /acm_mnt/acmagt Currently set: LOCAL,AUTORECOVER (LA) 1) HELP 4) DEFAULT 7) SHARE(S) 2) - 5) SYNC(Y) 8) MONITORONLY(M) 3) SAVE+RETURN 6) NOT:AUTORECOVER(A) Choose one of the flags: 3 |
After registering all of the mount points, select SAVE+EXIT.
File systems (Lfs_AGENT_SERVICE:consistent) 1) HELP 5) AdditionalMountPoint 2) - 6) MountPoints[0]=LA:/acm_mnt/acmagt 3) SAVE+EXIT 7) (Filter=) 4) REMOVE+EXIT 8) (Timeout=180) Choose the setting to process: 3 |
Press the Enter key to return to the [turnkey wizard "CRM"] window.
Settings of turnkey wizard "CRM" 1) HELP 9) CRM(-) 2) - 10) LocalFileSystems(Lfs_AGENT_SERVICE) 3) SAVE+EXIT 11) RemoteFileSystems(-) 4) - 12) IpAddresses(-) 5) ApplicationName=AGENT_SERVICE 13) RawDisks(-) 6) Machines+Basics(agent_service) 14) LVM-VolumeManagement(-) 7) CommandLines(-) 15) Gds:Global-Disk-Services(-) 8) Controllers(-) 16) Gls:Global-Link-Services(-) Choose the setting to process: |
Define the Gds resources.
After registering all of the mount points, select SAVE+EXIT.
Settings of turnkey wizard "CRM" 1) HELP 9) CRM(-) 2) - 10) LocalFileSystems(Lfs_AGENT_SERVICE) 3) SAVE+EXIT 11) RemoteFileSystems(-) 4) - 12) IpAddresses(-) 5) ApplicationName=AGENT_SERVICE 13) RawDisks(-) 6) Machines+Basics(agent_service) 14) LVM-VolumeManagement(-) 7) CommandLines(-) 15) Gds:Global-Disk-Services(-) 8) Controllers(-) 16) Gls:Global-Link-Services(-) Choose the setting to process: 15 |
Select AdditionalDiskClass.
Volume management (Gds_AGENT_SERVICE:not yet consistent) 1) HELP 4) REMOVE+EXIT 7) (StandbySupport=no) 2) - 5) AdditionalDiskClass 8) (AutoRecover=no) 3) SAVE+EXIT 6) (ClassNameFilter=) 9) (Timeout=1800) Choose the setting to process: 5 |
Register the GDS class to which the shared disk for AdvancedCopy Manager shared data belongs.
For a Storage management server transaction, also register the GDS class to which the shared disk for the AdvancedCopy Manager repository belongs.
To register multiple GDS classes, repeat steps b to d as many times as the number of GDS classes to be registered.
Select the class to be registered.
ACM-E-Agt is set in the following example.
1) HELP 6) ACM-E-Mgr 2) RETURN 7) ACM 3) FREECHOICE 8) ACM-E-Agt 4) CTCLS01 5) CTCLS02 Choose the disk class: 8 |
Select SAVE+RETURN.
Currently set: 1) HELP 5) MONITORONLY(M) 2) - 3) SAVE+RETURN 4) DEFAULT Choose additionally one of the flags: 3 |
After registering all of the GDS classes, select SAVE+EXIT.
Volume management (Gds_AGENT_SERVICE:consistent) 1) HELP 6) DiskClasses[0]=ACM-E-Agt 2) - 7) (ClassNameFilter=) 3) SAVE+EXIT 8) (StandbySupport=no) 4) REMOVE+EXIT 9) (AutoRecover=no) 5) AdditionalDiskClass 10) (Timeout=1800) Choose the setting to process: 3 |
Press the Enter key to return to the [turnkey wizard "CRM"] window.
Settings of turnkey wizard "CRM" 1) HELP 2) - 3) SAVE+EXIT 4) - 5) ApplicationName=AGENT_SERVICE 6) Machines+Basics(agent_service) 7) CommandLines(-) 8) Controllers(-) 9) CRM(-) 10) LocalFileSystems(Lfs_AGENT_SERVICE) 11) RemoteFileSystems(-) 12) IpAddresses(-) 13) RawDisks(-) 14) LVM-VolumeManagement(-) 15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE) 16) Gls:Global-Link-Services(-) Choose the setting to process: |
Define the Gls resources.
Select "Gls:Global-Link-Services" in the turnkey wizard "CRM".
Settings of turnkey wizard "CRM" 1) HELP 2) - 3) SAVE+EXIT 4) - 5) ApplicationName=AGENT_SERVICE 6) Machines+Basics(agent_service) 7) CommandLines(-) 8) Controllers(-) 9) CRM(-) 10) LocalFileSystems(Lfs_AGENT_SERVICE) 11) RemoteFileSystems(-) 12) IpAddresses(-) 13) RawDisks(-) 14) LVM-VolumeManagement(-) 15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE) 16) Gls:Global-Link-Services(-) Choose the setting to process: 16 |
Select AdditionalTakeoverIpaddress.
Gls (Gls_AGENT_SERVICE:not yet consistent) 1) HELP 4) REMOVE+EXIT 2) - 5) AdditionalTakeoverIpaddress 3) SAVE+EXIT 6) (Timeout=60) Choose the setting to process: 5 |
Register the logical IP address prepared for AdvancedCopy Manager.
Select the logical IP address to be registered.
10.10.10.11 is set in the following example.
1) HELP 2) RETURN 3) FREECHOICE 4) 10.10.10.10 5) 10.10.10.11 Choose a takeover IP address for Gls: 5 |
Select SAVE+RETURN.
Set a flag for takeover IP address: 10.10.10.11 Currently set: 1) HELP 5) AUTORECOVER(A) 2) - 3) SAVE+RETURN 4) DEFAULT Choose additonally one of the flags: 3 |
The resource operation mode can be set in the window. Depending on the operation mode, set the resource operation mode.
For information on the resource operation modes, refer to the "Setting Up Gls Resources" section in the "PRIMECLUSTER Installation and Administration Guide."
Select SAVE+EXIT.
Gls (Gls_AGENT_SERVICE:consistent) 1) HELP 5) AdditionalTakeoverIpaddress 2) - 6) TakeoverIpaddress[0]=N,10.10.10.11 3) SAVE+EXIT 7) (Timeout=60) 4) REMOVE+EXIT Choose the setting to process: 3 |
The timeout value of the Gls resource can be set in the window. Depending on the operation mode, specify the timeout value of the Gls resource.
For information on the timeout values of the Gls resources, refer to the "Setting Up Gls Resources" section in the "PRIMECLUSTER Installation and Administration Guide."
Press the Enter key to return to the [turnkey wizard "CRM"] window.
Settings of turnkey wizard "CRM" 1) HELP 2) - 3) SAVE+EXIT 4) - 5) ApplicationName=AGENT_SERVICE 6) Machines+Basics(agent_service) 7) CommandLines(-) 8) Controllers(-) 9) CRM(-) 10) LocalFileSystems(Lfs_AGENT_SERVICE) 11) RemoteFileSystems(-) 12) IpAddresses(-) 13) RawDisks(-) 14) LVM-VolumeManagement(-) 15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE) 16) Gls:Global-Link-Services(Gls_AGENT_SERVICE) Choose the setting to process: |
Define the procedure resources.
Select "CRM" in the turnkey wizard "CRM".
Settings of turnkey wizard "CRM" 1) HELP 2) - 3) SAVE+EXIT 4) - 5) ApplicationName=AGENT_SERVICE 6) Machines+Basics(agent_service) 7) CommandLines(-) 8) Controllers(-) 9) CRM(-) 10) LocalFileSystems(Lfs_AGENT_SERVICE) 11) RemoteFileSystems(-) 12) IpAddresses(-) 13) RawDisks(-) 14) LVM-VolumeManagement(-) 15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE) 16) Gls:Global-Link-Services(Gls_AGENT_SERVICE) Choose the setting to process: 9 |
Select "Application." Register the AdvancedCopy Manager procedure resource as an Application.
Crm (CRM_AGENT_SERVICE:not yet consistent) 1) HELP 4) REMOVE+EXIT 7) BasicApplication(-) 2) - 5) SystemState2(-) 8) Application(-) 3) SAVE+EXIT 6) SystemState3(-) Choose the setting to process: 8 |
Select AdditionalResource.
Settings of "Application" 1) HELP 4) REMOVE+RETURN 2) NO-SAVE+RETURN 5) AdditionalResource 3) - Choose the setting to process: 5 |
Select the AdvancedCopy Manager procedure resource. The name of the AdvancedCopy Manager procedure resource is SMGRPROC_logical-node-name.
The procedure resource with the logical node name "nodeagt (SMGRPROC_nodeagt)" is set in the following example.
1) HELP 2) RETURN 3) - 4) SMGRPROC_nodeagt Choose the resource: 4 |
Select SAVE+RETURN.
Settings of "Application" 1) HELP 5) AdditionalResource 2) NO-SAVE+RETURN 6) ResourceName[0]=SMGRPROC_nodeagt 3) SAVE+RETURN 7) Flags[0]=OT1800 4) REMOVE+RETURN 8) Priority[0]=65535 Choose the setting to process: 3 |
Do not change the timeout value and resource class internal priority for the state transition procedure, which is the AdvancedCopy Manager procedure resource.
For information on timeout values and the resource class internal priority for the state transition procedure, refer to the " Setting Up Procedure Resources " section in the "PRIMECLUSTER Installation and Administration Guide."
Select SAVE+EXIT.
Crm (CRM_AGENT_SERVICE:consistent) 1) HELP 5) SystemState2(-) 2) - 6) SystemState3(-) 3) SAVE+EXIT 7) BasicApplication(-) 4) REMOVE+EXIT 8) Application(Crm_Application) Choose the setting to process: 3 |
Press the Enter key to return to the [turnkey wizard "CRM"] window.
Settings of turnkey wizard "CRM" 1) HELP 2) - 3) SAVE+EXIT 4) - 5) ApplicationName=AGENT_SERVICE 6) Machines+Basics(agent_service) 7) CommandLines(-) 8) Controllers(-) 9) CRM(CRM_AGENT_SERVICE) 10) LocalFileSystems(Lfs_AGENT_SERVICE) 11) RemoteFileSystems(-) 12) IpAddresses(-) 13) RawDisks(-) 14) LVM-VolumeManagement(-) 15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE) 16) Gls:Global-Link-Services(Gls_AGENT_SERVICE) Choose the setting to process: |
After registering all of the resources, select SAVE+EXIT.
Settings of turnkey wizard "CRM" 1) HELP 2) - 3) SAVE+EXIT 4) - 5) ApplicationName=AGENT_SERVICE 6) Machines+Basics(agent_service) 7) CommandLines(-) 8) Controllers(-) 9) CRM(CRM_AGENT_SERVICE) 10) LocalFileSystems(Lfs_AGENT_SERVICE) 11) RemoteFileSystems(-) 12) IpAddresses(-) 13) RawDisks(-) 14) LVM-VolumeManagement(-) 15) Gds:Global-Disk-Services(Gds_AGENT_SERVICE) 16) Gls:Global-Link-Services(Gls_AGENT_SERVICE) Choose the setting to process: 3 |
Press the Enter key to return to the [Main configuration menu] window.
f250-1: Main configuration menu, current configuration: acm No RMS active in the cluster 1) HELP 10) Configuration-Remove 2) QUIT 11) Configuration-Freeze 3) Application-Create 12) Configuration-Thaw 4) Application-Edit 13) Configuration-Edit-Global-Settings 5) Application-Remove 14) Configuration-Consistency-Report 6) Application-Clone 15) Configuration-ScriptExecution 7) Configuration-Generate 16) RMS-CreateMachine 8) Configuration-Activate 17) RMS-RemoveMachine 9) Configuration-Copy Choose an action: |
Select "Configuration-Generate" from the Main RMS Management menu.
f250-1: Main configuration menu, current configuration: acm No RMS active in the cluster 1) HELP 10) Configuration-Remove 2) QUIT 11) Configuration-Freeze 3) Application-Create 12) Configuration-Thaw 4) Application-Edit 13) Configuration-Edit-Global-Settings 5) Application-Remove 14) Configuration-Consistency-Report 6) Application-Clone 15) Configuration-ScriptExecution 7) Configuration-Generate 16) RMS-CreateMachine 8) Configuration-Activate 17) RMS-RemoveMachine 9) Configuration-Copy Choose an action: 7 |
Select "Configuration Active" from the Main RMS Management menu.
f250-1: Main configuration menu, current configuration: acm No RMS active in the cluster 1) HELP 10) Configuration-Remove 2) QUIT 11) Configuration-Freeze 3) Application-Create 12) Configuration-Thaw 4) Application-Edit 13) Configuration-Edit-Global-Settings 5) Application-Remove 14) Configuration-Consistency-Report 6) Application-Clone 15) Configuration-ScriptExecution 7) Configuration-Generate 16) RMS-CreateMachine 8) Configuration-Activate 17) RMS-RemoveMachine 9) Configuration-Copy Choose an action: 8 |
|
Contents
Index
|