負荷分散／QoS制御 システム構築ガイド

1.3.4.1 ND1

• /etc/inet/hosts

  192.168.0.1 nd_fvip
  192.168.0.10 nd1_fvip
  192.168.1.10 nd1_fip1
  192.168.2.10 nd1_fip2
  192.168.3.1 nd_nvip
  192.168.3.20 nd1_nip1
  192.168.3.30 nd1_nip2
  192.168.0.100 www_vip
  192.168.3.254 clgw

  
  
• /etc/inet/netmasks

  192.168.0.0 255.255.255.0
  192.168.1.0 255.255.255.0
  192.168.2.0 255.255.255.0
  192.168.3.0 255.255.255.0

• /etc/hostname.qfe0

  nd1_fip1

• /etc/hostname.qfe1

  nd1_fip2

• /etc/hostname.qfe2

  nd1_nip1

• /etc/hostname.qfe3

  nd1_nip2

• /etc/defaultrouter

  clgw

• /etc/opt/FJSVhanet/script/interface/sha1

#!/bin/sh
.....
INTERFACE=$3
#IP_ADDR1="xx.xx.xx.xx"
#IP_ADDR2="yy.yy.yy.yy"
#MAC_ADDR1="xx:xx:xx:xx:xx:xx"
#MAC_ADDR2="yy:yy:yy:yy:yy:yy"
IP_ADDR="192.168.3.30"

case "$1" in

'before')
#
# script before activate interface
#

echo "execute script before activate interface on" $INTERFACE > /dev/console
#if [ ! $INTERFACE = "hmeX" ]
#then
#       ifconfig $INTERFACE ether $MAC_ADDR1
#else
#       ifconfig $INTERFACE ether $MAC_ADDR2
#fi
if [ $INTERFACE = "qfe2" ]
then
    ifconfig qfe3 $IP_ADDR netmask +
else
    ifconfig qfe2 $IP_ADDR netmask +
fi

....以下略.....