#: handle invalid
###### (major# #) not hotplugable
###### is still referenced.
All devices are not unconfigured.
Another DR is executed.
board # is already connected.
can't get fma-ranges on board #.
can't get fma-ranges. No remaining memory is attached.
can't get memlist on board #.
can't get s_basepa from 0x#
can't get t_basepa from 0x#
Connection Script returns illegal exit code. (Exit code=#)
cpu # still active
cpu_configure for cpu # failed
cpu_unconfigure for cpu # failed
deprobe failed for board #
detect dr-status = ######
devlist[#] empty (expected #)
DR is not enabled.
DR operation is not executed.
drc: Another drc is executed.
drc: Board Type is different (sbXY).
drc: Board Type is different (sbXY-N).
drc: cannot open /dev/FJSVhwr/pwrctl2: システムコールエラーメッセージ
drc: CPU clock frequency is different (sbXY).
drc: CPU clock frequency is different (sbXY-N).
drc: DR is failed. Specified partition (PID#nn) is Extended Interleave Mode (sbXY).
drc: DR is failed. Specified partition (PID#nn) is Extended Interleave Mode (sbXY-N).
drc: DR is failed. This partition is Extended Interleave Mode (sbXY).
drc: DR is failed. This partition is Extended Interleave Mode (sbXY-N).
drc: DR is not enabled.
drc: DR is not supported.
drc: dr module is not found.
drc: dr module terminated abnormally(X).
drc: Incorrect memory mode (sbXY).
drc: Incorrect memory mode (sbXY-N).
drc: Incorrect PID.
drc: Invalid Status XX YY
drc: ioctl() failed: システムコールエラーメッセージ
drc: not super user
drc: Specified system board is not installed (sbXY).
drc: Specified system board is not installed (sbXY-N).
drc: System board is in use by another partition (sbXY).
drc: System board is in use by another partition (sbXY-N).
drc: System call failed.
drc: Time Out
drc: Unable to connect the specified system board (sbXY).
drc: Unable to connect the specified system board (sbXY-N).
drc: Unable to disconnect the specified system board (sbXY incorrect PID).
drc: Unable to disconnect the specified system board (sbXY-N incorrect PID).
drc: Unable to disconnect the specified system board (sbXY incorrect status).
drc: Unable to disconnect the specified system board (sbXY-N incorrect status).
drc: Unable to disconnect the specified system board (sbXY last system board).
drc: Unable to disconnect the specified system board (sbXY-N last system board).
drcstat: /dev/openprom ioctl() failed :X:システムコールエラーメッセージ
drcstat: cannot open /dev/FJSVhwr/pwrctl2: システムコールエラーメッセージ
drcstat: DR is not supported.
drcstat: dr module is not found.
drcstat: dr_info terminated abnormally(X).
drcstat: ioctl() failed: システムコールエラーメッセージ
drcstat: malloc() failed.
drcstat: not super user
drcstat: Specified system board does not exist in current partition.
drcstat: Specified system board is not installed.
drcstat: System call failed.
Error occurred on executing #### (Exit code=#)
Fail to cancel releasing the memory.
Fail to check the bound processes.
Fail to configure the board.
Fail to configure the CPU.
Fail to configure the I/O.
Fail to configure the memory.
fail to connect board with the error = 0xX.
fail to connect board. retval = #.
Fail to delete the processor group.
Fail to disconnect the board.
Fail to execute cfgadm ###### I/O Device=######.
fail to get OBP translations
Fail to get the status of the board.
fail to initialize device information.
fail to map the obp area #
Fail to offline the CPU. [processor_id=#]
Fail to online the CPU. [processor_id=#]
fail to quiesce OS for copy-rename
Fail to release the board.
Fail to release the CPU.
Fail to release the I/O.
Fail to release the memory.
Fail to remove processor from processor group.
Fail to restart picld.
fail to stop kernel thread
fail to stop process: ###### id: # state: #
Fail to unbind processes.
Fail to unconfigure the board.
Fail to unconfigure the CPU.
Fail to unconfigure the I/O.
Fail to unconfigure the memory.
failed obp detach of cpu #
failed to attach cpu node branch to node tree. (error=#)
failed to attach I/O node branch to node tree. (error=#)
failed to attach mem node branch to node tree. (error=#)
failed to copyout ioctl-cmd-arg
failed to detach cpu node branch (######) from the node tree. (error=#)
failed to detach I/O node branch (######) from the node tree. (error=#)
failed to detach mem node branch (######) from the node tree. (error=#)
failed to disable interrupts on cpu #.
failed to get cpuid for nodeid (0xX)
failed to get cpuid(#)
failed to offline cpu #
failed to power-off cpu # (errno = #)
failed to power-on cpu #
failed to quiesce OS for copy-rename
fjsv_cdr_alloc_cache_func() failed.
fjsv_cdr_alloc_fma_job() failed.
fjsv_cdr_fma_clear_data() failed.
fjsv_cdr_fma_copy_data() failed.
fjsv_cdr_make_job() failed.
fjsv_cdr_make_req() failed.
fjsv_u2_ecc_kstat_delete: wrong board number #
fjsv_u2ts_kstat_delete: wrong board number #
fjsv_upa_ecc_kstat_delete: wrong board number #
FMA failed. rtn = #.
I/O devices active
Illegal environment for DR. (ftrace_atboot is set to 1.)
ineligible mem-unit (#.#) for detach
internal error: no memlist for board #
invalid device
invalid nodetype (#)
invalid state to deprobe board #
invalid state transition
invalid state transition for mem-unit (#.#)
Invalid Status Devices=#### Status=####
Invalid System Board Number
kcage_range_add failed. (#)
kernel cage is disabled
Kernel memory is on the target board.
kphysm_add_memory_dynamic failed. (#)
kphysm_del_status
master TOD present on board #
Memory is not enough to detach the board.
mem-unit (#.#) has non-relocatable page(s).
mem-unit (#.#) memlist not in phys_install
mem-unit (#.#) release in-progress
no available target for mem-unit (#.#)
no available target for mem-unit (#.#). The candidate has no-obp-sb-cX.
no devices present on board #
no quiesce while real-time pid (#) present
probe failed for board #
prom_fjsv_fma_end failed. rtn = #
prom_fjsv_fma_start failed.
protocol error: kphysm_del_span_query [bd=#, bp=0xX, n=#]
protocol error: mem-unit (#.#) missing target indicator
protocol error: mem-unit (#.#) not released
psrinfo fails.
Recovery fails.
There is not enough swap space.
unable to get unit for nodeid (0xX)
unexpected state (#) for mem-unit (#.#)
Usage: drc -connect sbXY [-reset]
Usage: drc -connect {sbXY | sbXY-N} [-reset]
Usage: drc -disconnect sbXY [-reset]
Usage: drc -disconnect {sbXY | sbXY-N} [-reset]
Usage: drc -disconnect sbXY -next PID [-reset]
Usage: drc -disconnect {sbXY | sbXY-N} -next PID [-reset]
Usage: drc -disconnect sbXY -keep
Usage: drc -disconnect {sbXY | sbXY-N} -keep
Usage: drc -abort
Usage: adrc -connect sbXY [-reset]
Usage: adrc -connect {sbXY | sbXY-N} [-reset]
Usage: adrc -disconnect sbXY [-reset]
Usage: adrc -disconnect {sbXY | sbXY-N} [-reset]
Usage: adrc -disconnect sbXY -next PID [-reset]
Usage: adrc -disconnect {sbXY | sbXY-N}-next PID [-reset]
Usage: drcstat -board [sbXY | all]
Usage: drcstat -board [sbXY | sbXY-N | all] [-xpar]
Usage: drcstat -system [sbXY]
Usage: drcstat -system [sbXY| sbXY-N] [-xpar]
Usage: drcstat -device [sbXY] [-e]
Usage: drcstat -device [sbXY | sbXY-N] [-e] [-xpar]
