Machine Administration Guide 2.6

4.37 setpwrmode (1M)

Name

setpwrmode - Interlocking mode setting command

Format

/usr/sbin/FJSVmadm/setpwrmode [mode [enable|disable] | default]

Function

Sets the interlocking mode.
Enables or disables the specified mode.
If you do not specify mode, the system displays all settings.
If you do not specify "enable" or "disable", the system displays the current setting.

Option

The options are:

mode

Specify one mode out of the following. [] indicates the default setting.

RCI information

mode	Definition
PONSND	Power-on send mode [enable]
PONRCV	Power-on receive mode [disable]
POFFSND	Power-off send mode [enable]
POFFRCV	Power-off receive mode [disable]
EPOSND	EPO power-off send mode [disable]
RSTRCV	RESET receivable [disable]
FPOSAFE	Power-on restraint mode after FPO (forced power-off) [disable] (supported only by PW-P)

EPC information

mode	Definition
EPCPON	Power-on instruction receivable [enable]
EPCPOFF	Power-off instruction receivable [enable] (not supported by PW-P)
EPCREIPL	REIPL receivable [enable] (not supported by PW-P)

enable

Enables the specified mode.

disable

Disables the specified mode.

default

Retsets all modes to default.

Example of use

The following is an example of current settings.

# /usr/sbin/FJSVmadm/setpwrmode
PONSND : disable
PONRCV : disable
POFFSND : disable
POFFRCV : disable
EPOSND : disable
RSTRCV : disable
EPCPON : enable
EPCPOFF : enable
EPCREIPL : enable

The following is an example of enabling the power-on instruction send mode.

# /usr/sbin/FJSVmadm/setpwrmode PONSND enable

End status

The end status can be:
0: Normal end
Other than 0: Error