Machine Administration Guide 2.6

3.1.6.8 UPS Monitoring

This section describes how to operate the UPS Monitoring function.

Displaying the UPS Monitoring menu

Operation

1. From the Hardware Monitoring Information menu, select [UPS Monitoring].

   The UPS Monitoring menu opens.

   

Displaying UPS Monitoring Information

The following describes how to operate the Displaying UPS Monitoring Information function:

Operation

1. From the UPS Monitoring menu, select [Displaying and Setting UPS Monitoring Information].

   The UPS monitoring information appears.

   This information includes:

   • Unit

     The identifier of the UPS unit

   • Status

     The UPS unit status

     Normal: Normal status

     Error: A UPS unit error was detected. The part needs to be replaced immediately.

   • Error Notification

     Indicates whether a notification is to be issued to prompt error reporting if an error was detected.

     Valid: Notification.

     Invalid: No notification.

Setting UPS Monitoring Information

The following describes how to perform the Setting UPS Monitoring Information operation:

Operation

1. From the UPS Monitoring menu, select [Displaying and Setting UPS Monitoring Information].

   The UPS monitoring information list appears:

2. Select the UPS unit whose settings are to be made.
3. Enter the following information in the menu:
   • Setting Valid/Invalid Notification

     Specify whether a notification is to be issued, for each UPS unit. The default is "Valid."

     Valid: Notification.

     Invalid: No notification.

     The above setting can be made for the following type of notification:

     Error Notification: Used to prompt for unit replacement if an error was detected.

   • Resetting Monitoring Information

     Reset the monitoring information when the UPS unit was replaced.

Setting UPS Monitoring Notification

The following describes how to perform the Setting UPS Monitoring Notification operation:

Operation

1. From the UPS Monitoring menu, select [Setting UPS Monitoring Notification].

   The Setting UPS Monitoring Notification menu opens.

2. Enter the following information in the menu:
   • Error Notification Destination

     If error notification is required, specify the destination to which that notification is automatically sent.

     Specify the notification destination from the following:

     • Output to the console
     • Sending mail to the system administrator
     • Sending mail to the CE

   

   Specify the mail address from the Setting Monitoring Notification Information menu of the Hardware Monitoring Information menu.